TSX: MNB, ASX: MBN
Ordinary shares outstanding: 129,781,100
PERTH, Australia, June 24 /CNW/ - Mirabela Nickel Limited (TSX: MNB, ASX: MBN) is pleased to announce further drilling results that are expected to deepen and extend its Santa Rita open-pit mine in Brazil and open up the possibility of developing an underground mine.
"The results of drilling near and below the base of the currently designed open-pit have far exceeded our expectations. The new intersections are about three times wider, 15% higher grade, and more consistent than previous typical intersections used in the reserve estimate," said Managing Director Nick Poll. "The current open-pit reserve is about 400m deep without the benefit of results as strong as these, so we can be confident that these new results will push the open-pit design deeper and increase the mining reserve," he said.
"A second drill hole designed to test the underground mining potential at about 700m below surface, and 300m deeper than previous drilling, has returned a composite intersection of 62m at 0.95% Ni. Our first such hole intersected 119m at 0.93% Ni. We believe that these grades and widths are amenable to underground mining," said Mr Poll. "These holes indicate that the strong mineralization encountered near the base of the current open-pit continues for at least another 300m and remains open at depth. If so, an underground mining operation is a real possibility for Santa Rita. We are currently using 4 rigs to drill up this underground potential." he said.
Santa Rita is slated to be the third largest open-pit nickel mine in the world containing over 500,000t of contained Ni in reserves. Mine construction is about 30% complete and production is expected to commence mid 2009. The Company is on track to complete a debt financing facility by end of July. Photos of the construction progress are regularly published on the Company website at: www.mirabela.com.au/projects_galleries.asp.
Results from Southern High Grade Zone
Results of drilling for potential open-pit mineralization in the Southern
High Grade zone are as follows:
Composite results from the Southern High Grade zone
-----------------------------------------------------------
Composite
downhole
Hole ID From (m) width (m) Ni%
-----------------------------------------------------------
MBS-538 405 109 0.62
MBS-540 439 172 0.70
MBS-549 407 159 0.76
MBS-555 479 81 0.71
MBS-563 441 110 0.68
MBS-564 483 174 0.71
-----------------------------------------------------------
0.4% Ni cut off grade, 4m minimum mining width
The average of the above results, being all new results in this zone, is 134m at 0.70% Ni. The average of all (eleven) holes drilled in Southern High Grade zone since the last resource calculation is 126m at 0.72% Ni. These holes test depth extensions across 6 sections along a strike length of 230m. The true widths in this zone are about 90% of the down-hole widths. A long-section and cross-sections showing these and the April results will be posted on the Company's website shortly.
Studies of nickel distribution in the Santa Rita deposit indicate that the widths, grades and consistency of mineralization in the Southern High Grade zone are far better than anywhere else in the Santa Rita deposit and might continue to improve with depth (see long-section). This provides strong encouragement for a possible underground operation (see below).
Results from Other Areas of the Southern Zone
Drilling has continued in other areas of the Southern zone, outside of the
High Grade zone discussed above, to prove up more mineralization within
potential open-pit limits towards the south. The results are as follows:
Composite drilling results from the remaining Southern zone
-----------------------------------------------------------
Composite
downhole
Hole ID From (m) width (m) Ni%
-----------------------------------------------------------
MBS-550 398 62 0.52
MBS-557 421 97 0.79
MBS-565 377 79 0.55
MBS-569 270 67 0.55
-----------------------------------------------------------
0.4% Ni cut off grade, 4m minimum mining width
The average composite intersection for these holes, being all new results in the remainder of the Southern zone, is 76m at 0.62% Ni. These are strong results that will further extend the open-pit limits in these areas. The true width of mineralization for these results is about 80% of the down-hole width.
Results from Extended Deeps Drilling and Underground Study
Drilling designed to test well below current open-pit limits, in the
Extended Deeps zone, has returned excellent results and provides strong
encouragement for an underground mining study. The results from new drill hole
MBS 547 and previously announced drill hole MBS 532 are reported below using a
0.5% cut-off grade.
Composite drilling results from the Extended Deeps zone
-----------------------------------------------------------
Composite
downhole
Hole ID From (m) width (m) Ni%
-----------------------------------------------------------
MBS-532(x) 783 119 0.93
MBS-547 787 62 0.95
-----------------------------------------------------------
0.5% Ni cut off grade, 4m minimum mining width
(x) Previously reported at 0.4% Ni cut off grade
MBS 547 is located at about the same depth as MBS 532 and 105m along strike to the north. Both holes are about 300m deeper than any previous drilling and intersect mineralisation about 700m below surface. The intersections appear to extend the Southern High Grade zone which plunges through the base of the current open-pit and remains open at depth.
These excellent results have encouraged the Company to embark upon a wide spaced Extended Deeps drilling program, with the aim to prove up a substantial inferred resource at depths well below the current open-pit limits. This program is underway with 4 holes drilled and awaiting assays, 4 additional holes in progress, and a further 4 holes planned. Drilling is likely to continue beyond this initial program.
The Company believes that underground mining at Santa Rita is likely to be economic, based on the drilling results so far and preliminary benchmarking of underground mining costs. The distribution of mineralization and geotechnical characteristics of the deposit appear to be favourable for underground mining and it is possible to upgrade the plant capacity to accommodate underground production without major modifications.
In conjunction with the Extended Deeps drilling program, the Company has commenced a scoping study into potential underground mining at Santa Rita, including further expansion of the plant to accommodate additional underground throughput.
New Resource Estimate
The current pit extension drilling program is complete with only 2 holes awaiting assays. A new in-pit resource estimate will be undertaken immediately upon return of these last assays. This resource upgrade is now expected to be completed by August. The corresponding open-pit mining reserve is expected by September.
More Details
More details of these latest results are provided in Attachments 1, 2 and 3. Schematic long and cross section diagrams with results can be downloaded from www.mirabela.com.au/projects_galleries.asp. These diagrams might take a few days to publish to the website after release of this announcement.
(signed) (signed) Nick Poll Craig Burton Managing Director Corporate Director
Background
Mirabela Nickel Ltd is listed on the Australian and Toronto stock exchanges. With an open-cut mining reserve of 84mt grading 0.61% Ni, Santa Rita is the largest greenfields nickel sulphide discovery in the last 12 years and the third largest open-cut nickel sulphide mining reserve worldwide.
Construction of a nickel sulphide concentrator commenced in November 2007 and is progressing well. The plant is expected to produce 18,500 tpa of nickel in a sulphide concentrate from one open-cut mine starting from mid 2009 increasing to 25,000 tpa by mid 2010. At this rate of production the project will have a mine life of at least 14 years.
The information in this report that relates to Exploration Results, Mineral Resources or Ore Reserves is based on information compiled by Lauritz Barnes, who is a Member of the Australian Institute of Geoscientists. Lauritz Barnes is a consultant employed by Mirabela Nickel Ltd.
Lauritz Barnes has sufficient experience which is relevant to the style of mineralization and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2004 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserve'. Lauritz Barnes consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
Caution Regarding Forward Looking Statements: There can be no assurance that an expanded mineral resource or reserve will be established at the Santa Rita Project. The forward-looking statements made in this news release are based on assumptions and judgments of management regarding future events and results. Such forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any anticipated future results, performance or achievements expressed or implied by such forward-looking statements.
www.mirabela.com.au
Attachment 1: New significant intersections - Southern Zone drilling
(0.4% Ni cut off grade)
----------------------------------------------------------------------
Downhole
Hole ID From (m) To (m) width Ni% Cu%
----------------------------------------------------------------------
MBS-538 405 420 15 0.48 0.20
MBS-538 469 499 30 0.71 0.28
MBS-538 506 537 31 0.56 0.19
MBS-538 555 562 7 0.42 0.11
MBS-538 581 588 7 0.63 0.15
MBS-538 598 609 11 0.89 0.18
MBS-538 616 624 8 0.50 0.07
MBS-540 439 443 4 0.42 0.18
MBS-540 461 523 62 0.68 0.22
MBS-540 530 591 61 0.85 0.24
MBS-540 604 608 4 0.54 0.09
MBS-540 613 617 4 0.77 0.17
MBS-540 629 636 7 0.41 0.04
MBS-540 639 650 11 0.71 0.12
MBS-540 653 657 4 0.41 0.05
MBS-540 667 682 15 0.46 0.02
MBS-549 407 418 11 0.42 0.17
MBS-549 425 549 124 0.83 0.25
MBS-549 567 571 4 0.72 0.14
MBS-549 595 599 4 0.43 0.04
MBS-549 625 641 16 0.53 0.07
MBS-550 398 418 20 0.46 0.16
MBS-550 472 484 12 0.62 0.19
MBS-550 499 504 5 0.43 0.14
MBS-550 508 512 4 0.42 0.13
MBS-550 519 530 11 0.52 0.17
MBS-550 538 542 4 0.66 0.27
MBS-550 620 626 6 0.58 0.08
MBS-555 479 509 30 0.85 0.28
MBS-555 516 526 10 0.52 0.15
MBS-555 534 555 21 0.76 0.27
MBS-555 593 597 4 0.41 0.02
MBS-555 602 606 4 0.57 0.07
MBS-555 612 620 8 0.72 0.10
MBS-555 664 668 4 0.42 0.03
MBS-557 421 472 51 0.70 0.20
MBS-557 510 517 7 0.64 0.17
MBS-557 525 545 20 0.97 0.25
MBS-557 589 608 19 0.86 0.17
MBS-563 441 453 12 0.61 0.22
MBS-563 464 523 59 0.73 0.24
MBS-563 534 547 13 0.65 0.18
MBS-563 558 564 6 0.82 0.21
MBS-563 579 583 4 0.70 0.20
MBS-563 594 600 6 0.46 0.08
MBS-563 660 664 4 0.64 0.10
MBS-563 678 684 6 0.56 0.07
MBS-564 483 495 12 0.52 0.23
MBS-564 501 527 26 0.45 0.18
MBS-564 534 630 96 0.81 0.28
MBS-564 660 696 36 0.72 0.15
MBS-564 717 721 4 0.49 0.04
MBS-565 377 389 12 0.50 0.18
MBS-565 443 455 12 0.60 0.20
MBS-565 459 463 4 0.44 0.13
MBS-565 481 489 8 0.59 0.17
MBS-565 512 526 14 0.46 0.12
MBS-565 543 568 25 0.63 0.14
MBS-565 601 604 4 0.41 0.02
MBS-569 270 274 4 0.52 0.21
MBS-569 326 333 7 0.46 0.14
MBS-569 409 444 35 0.59 0.17
MBS-569 454 464 10 0.58 0.12
MBS-569 502 508 6 0.47 0.07
MBS-569 530 535 5 0.51 0.08
----------------------------------------------------------------------
----------------------------------------------------------------------
All chemical analyses were completed by ALS Chemex, Vancouver, Canada
Attachment 2: Existing and new significant intersections - Southern Zone
Extended Deeps drilling
(0.5% Ni cut off grade)
----------------------------------------------------------------------
Downhole
Hole ID From (m) To (m) width Ni% Cu%
----------------------------------------------------------------------
MBS-532(1) 783 867 84 0.99 0.28
MBS-532 889 898 9 0.88 0.20
MBS-532 909 915 6 0.75 0.12
MBS-532 925 945 20 0.73 0.15
MBS-547 787 824 37 1.01 0.28
MBS-547 835 846 11 0.80 0.22
MBS-547 869 877 8 1.03 0.25
MBS-547 961 967 6 0.71 0.11
----------------------------------------------------------------------
All chemical analyses were completed by ALS Chemex, Vancouver, Canada
(1) MBS-532 - Previously reported in announcement dated 28 April 2008
using 0.4% Ni cutoff
Attachment 3: Drill hole collar locations
-------------------------------------------------------------------------
Survey Hole
Hole ID Hole type type Easting Northing RL Depth Dip Azimuth
-------------------------------------------------------------------------
MBS-532(1) Southern Deeps TS(2) 423405 8430400 138 1022 -60 270
MBS-538 Southern Deeps TS 422935 8430470 141 665 -60 270
MBS-540 Southern Deeps TS 422987 8430430 136 695 -60 270
MBS-547 Southern Deeps TS 423335 8430505 137 1021 -60 270
MBS-549 Southern Deeps TS 422977 8430400 137 700 -60 270
MBS-550 Southern Deeps TS 423044 8430310 134 650 -60 270
MBS-555 Southern Deeps TS 422848 8430540 146 701 -60 270
MBS-557 Southern Deeps TS 423046 8430230 135 650 -60 270
MBS-563 Southern Deeps TS 423065 8430355 135 700 -60 270
MBS-564 Southern Deeps TS 423056 8430430 135 760 -60 270
MBS-565 Southern Deeps TS 423043 8430270 135 630 -60 270
MBS-569 Southern Deeps TS 422992 8430190 131 600 -60 270
-------------------------------------------------------------------------
(1) MBS-532 - Previously reported in announcement dated 28 April 2008
(2) TS - Total Station Survey Tool