TSX: MNB, ASX:MBN Ordinary shares outstanding: 129,784,100
PERTH, Australia, Sept. 8 /CNW/ - Mirabela Nickel Limited (TSX: MNB, ASX: MBN) is pleased to announce the results of recent drilling for the Santa Rita underground project in the Extended Deeps area. The Company has now announced 7 of the 12 holes in the Extended Deeps area and the average composite result is 98m grading 0.85% Ni and 0.25% Cu.
"These are outstanding results - consistent, wide and relatively high grade - which demonstrate excellent potential for bulk underground mining at Santa Rita," said Managing Director Nick Poll. "Our objective is to establish an underground reserve and develop underground access early in the project's life to achieve a total Santa Rita production rate of 40,000tpa of nickel for at least 25 years," he said.
The results are as follows:
Composite results from the Extended Deeps program
-------------------------------------------------------------------------
Composite
Hole ID From (m) downhole Ni% Cu%
width (m)
-------------------------------------------------------------------------
MBS-595 767 59 0.72 0.20
MBS-597 892 89 0.79 0.21
MBS-598 899 146 0.83 0.25
MBS-599 681 88 0.79 0.28
-------------------------------------------------------------------------
0.5% Ni cut off grade, 4m minimum mining width
The core Extended Deeps program comprises 12 holes on approximate 120m x 105m spacing, see the schematic long section lodged on the Company's website at http://www.mirabela.com.au/projects_galleries.asp. There are 4 holes on each of sections 8430400N, 505N and 610N, collectively drilling up 600m of down-dip extension and 300m of strike. The true widths of these results are about 90% of down-hole widths.
Hole MBS-595, to the south of and slightly outside the main testing area, also has very encouraging results, so the resource is open in both directions along strike and at depth. Additional holes to extend the strike length of mineralization are planned, particularly to the north under the Central and Northern zones.
Another four Extended Deeps holes are awaiting assays and the last hole in the primary target area is currently being drilled. The underground resource estimation will commence upon receipt of these assays and is expected to be completed in November.
In conjunction with the Extended Deeps drilling program, the Company has commenced a scoping study into potential underground mining at Santa Rita, including further expansion of the plant to accommodate additional underground throughput. The aim is to develop an underground project that augments production from the open-cut mine within the next few years using early cash flows from open-pit production.
Due to the recent increase in the open-pit depth we reclassified five previous Extended Deeps holes as Pit Extension holes, three of which are reported below.
Results from Pit Extension drilling
Results of the latest Pit Extension holes are as follows:
Composite results from the Southern zone
-------------------------------------------------------------------------
Hole ID From (m) Composite Ni% Cu%
downhole
width (m)
-------------------------------------------------------------------------
MBS-592 511 98 0.63 0.21
-------------------------------------------------------------------------
MBS-596 526 112 0.83 0.27
-------------------------------------------------------------------------
MBS-600 471 82 0.76 0.20
-------------------------------------------------------------------------
0.4% Ni cut off grade, 4m minimum mining width
The holes are located at the base of the open-pit in the Southern deeps high grade zone, with MBS-600 just to the north of that zone. MBS-600 is substantially better than holes higher up on this section, confirming a trend of improved widths and grades at depth to the north of the Southern high grade zone. The true widths of these results are about 90% of down-hole widths.
These are strong results that are expected to convert Inferred open-pit resource to Indicated status and possibly contribute to deepening the open-pit beneath the Central zone. The pit is now 640m deep in the Southern deeps high grade zone, this in turn improves the potential for the pit to drive deeper across the Central deeps zone. MBS 600 demonstrates a possible trend of improved widths and grades at depth moving into this area.
More details of all the above results are set out in Attachments 1, 2 and 3.
Ongoing Drilling Programs
The drilling program now has four objectives that are prioritised as
follows:
1. Establish a maiden resource in the Extended Deeps area (drilling
almost completed)
2. Convert 20mt of Inferred open-pit resource to Indicated status, most
of which lies at the base of the Central zone
3. Deepen the open-pit beneath the Central and Northern zones
4. Explore further along strike for additional mineralisation with
underground potential
The schematic long section lodged on the Company's website shows the above recent results and the Pit Extension drilling target beneath the Central zone. In addition, Extended Deeps drilling will continue with a focus on strike extension to the north.
A total of 5 drilling rigs remain committed to these ongoing drilling programs.
Nick Poll Craig Burton Managing Director Corporate Director
Background
Mirabela Nickel Ltd owns 100% of the world class Santa Rita nickel sulphide project and is listed on the Australian and Toronto stock exchanges. With a JORC Indicated open-cut resource of 130mt grading 0.60% Ni for 780,000t of contained Ni, Santa Rita is the largest nickel sulphide discovery world-wide in the last 12 years.
Construction of a 6.4 mtpa nickel sulphide concentrator commenced in November 2007 and is currently 60% complete. The plant will produce 18,500 tpa of nickel in a sulphide concentrate from one open-cut mine starting from mid 2009 increasing to 27,000 tpa by mid 2010. At this rate of production the project will have a mine life of at least 20 years.
Photos of the construction progress are available on the Company website at: http://www.mirabela.com.au/projects_galleries.asp.
Qualified Person Statement: The information in this report that relates to Mineral Resources and Exploration Results is based on information compiled by Lauritz Barnes who is a Member of The Australian Institute of Geoscientists. Lauritz Barnes is a consultant to Mirabela Nickel Limited. Lauritz Barnes has sufficient experience which is relevant to the style of mineralization and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2004 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserve' and a Qualified Person in accordance with NI 43-101. Lauritz Barnes consents to the inclusion in the report of the matters based on their information in the form and context in which it appears.
Caution Regarding Forward Looking Statements: There can be no assurance that an expanded mineral resource or reserve will be established at the Santa Rita Project. The forward-looking statements made in this news release are based on assumptions and judgments of management regarding future events and results. Such forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any anticipated future results, performance or achievements expressed or implied by such forward-looking statements.
www.mirabela.com.au
Attachment 1: New intersections - Extended Deeps drilling
(0.5% Ni cut off grade)
-------------------------------------------------------------------------
Hole ID From To (m) Downhole Ni% Cu%
(m) width
-------------------------------------------------------------------------
MBS-595 767 821 54 0.71 0.21
MBS-595 878 883 5 0.74 0.16
MBS-597 892 966 74 0.77 0.22
MBS-597 990 1005 15 0.90 0.17
MBS-598 899 1034 135 0.82 0.25
MBS-598 1063 1074 11 0.95 0.26
MBS-599 681 752 71 0.78 0.28
MBS-599 761 778 17 0.81 0.30
-------------------------------------------------------------------------
All chemical analyses were completed by ALS Chemex, Vancouver, Canada
Attachment 2: New intersections - Pit Extension drilling
(0.4% Ni cut off grade)
-------------------------------------------------------------------------
Hole ID From To (m) Downhole Ni% Cu%
(m) width
-------------------------------------------------------------------------
MBS-592 511 537 26 0.52 0.21
MBS-592 575 595 20 0.64 0.17
MBS-592 602 654 52 0.68 0.23
MBS-596 526 533 7 0.64 0.50
MBS-596 552 627 75 0.90 0.29
MBS-596 647 662 15 0.59 0.13
MBS-596 672 687 15 0.78 0.20
MBS-600 471 479 8 0.44 0.24
MBS-600 488 493 5 0.44 0.20
MBS-600 538 547 9 0.60 0.16
MBS-600 554 559 5 0.75 0.23
MBS-600 597 622 25 0.94 0.26
MBS-600 636 666 30 0.79 0.16
-------------------------------------------------------------------------
All chemical analyses were completed by ALS Chemex, Vancouver, Canada
Attachment 3: Drill hole collar locations
-------------------------------------------------------------------------
Hole ID Hole Survey Easting Northing RL Hole Dip Azimuth
type type Depth
-------------------------------------------------------------------------
MBS-592 Southern TS 423057.0 8430505.0 140.6 805 -60 270
Deeps
MBS-595 Extended TS 423399.5 8430310.0 141.4 941 -60 270
Deeps
MBS-596 Southern TS 423125.3 8430400.0 144.1 800 -60 270
Deeps
MBS-597 Extended TS 423405.0 8430400.0 138.1 1109 -75 270
Deeps
MBS-598 Extended TS 423330.6 8430610.1 134.8 1105 -60 270
Deeps
MBS-599 Extended TS 423199.8 8430505.2 148.0 920 -60 270
Deeps
MBS-600 Southern TS 422919.2 8430610.0 149.9 740 -60 270
Deeps
-------------------------------------------------------------------------
1 TS - Total Station Survey Tool.