Kimber Res IncTSX: KBR

Kimber cuts 22 metres of 11.13 g/t gold-equivalent

· Issued by Kimber Res Inc via CNW
Kimber Resources Inc. (TSX:KBR)

VANCOUVER, Nov. 28 /CNW/ - Results are reported below from a further
eleven reverse circulation holes on the Carmen deposit between September 18
and October 26, 2005.
The DFR holes were drilled towards the south to test the intersections
contributed by the major east-west structures. The MTR holes were drilled
towards the southeast, the direction of most holes into the Carmen deposit.
All holes appear to fit the current understanding of controls to
mineralization. Some of the holes stepped out into undrilled areas, others
served to tighten the spacing between previous holes, thereby increasing
confidence in the interpretation.
The notable intersection in MTR-282, 22 metres of 11.13 g/t gold-
equivalent, (5.82 g/t Au and 452 g/t Ag) extends an intercept partially
developed by previous drilling.

<<
                                                                Gold
Drill Hole      From      To    Interval      Gold   Silver   Equivalent
----------      ----     ---    --------     -----   ------   ----------
                 (m)     (m)         (m)     (g/t)    (g/t)     (g/t)(x)

DFR- 14           82      86           4     4.915       40         5.39
  and             96     102           6     0.339       53         0.96
  and            126     130           4     0.632      272         3.83
  and            166     170           4     0.536       33         0.92
  and            184     188           4     1.416       12         1.55
  and            226     236          10     2.855      208         5.30
  and            240     270          30     1.110       11         1.24
DFR- 15          160     170          10     0.534       49         1.11
  and            174     188          14     0.234       58         0.98
  and            188     200          12     0.856       28         1.19
DFR- 16           54      72          18     1.326       64         2.08
  and             72      84          12     0.114       49         0.68
  and             96     130          34     0.266       51         0.86
  and            138     146           8     0.243       42         0.73
  and            204     218          14     1.115       24         1.40
DFR- 17            6      16          10     0.844       95         1.96
  and             30      86          56     0.490       71         1.33
  and            194     202           8     0.671       28         1.00
DFR- 18           68      74           6     0.819       53         1.44
  and             96     134          38     0.191       55         0.83
  and            144     150           6     0.662       38         1.11
  and            156     162           6     1.601       79         2.53
DFR- 19           66      70           4     2.032       62         2.76
  and             88     146          58     0.193       67         0.98
  and            156     186          30     0.731       87         1.75
MTC- 19          132     146          14     0.387       65         1.16
  and            152     156           4     0.362       45         0.89
  and            206     216          10     2.079       49         2.66
MTR-281           62      94          32     0.289       54         0.92
MTR-282          112     142          30     0.479       71         1.31
  and            166     188          22     5.814      452        11.13
  incl           166     170           4    26.525    2,108        51.32
  and            228     232           4     0.151       50         0.73
  and            252     268          16     3.566       66         4.35
  and            274     280           6     4.280       58         4.96
MTR-283           72      76           4     3.747      142         5.42
  and            114     130          16     0.421       52         1.03
  incl           124     128           4     1.119       73         1.98
  and            274     284          10     2.430       22         2.68
MTR-284           68      82          14     0.044       55         0.69
  and             98     112          14     0.229       48         0.80
  and            176     202          26     1.365       57         2.04
MTR-285            6      14           8     0.549       43         1.06
  and             86      96          10     0.212       51         0.81
  and            118     138          20     0.729       58         1.41
  and            172     176           4    19.598      882        29.97
  and            216     220           4     1.480       35         1.89
MTR-285           42      48           6     0.026       69         0.84
                 140     144           4     2.096        6         2.17
                 156     168          12     1.364       30         1.71
MTR-287          168     172           4     1.024        5         1.09

(x) Gold equivalent grade assumes equivalence of 85 grams of silver to
    one gram of gold.

True widths are expected to range between 65% and 85% of the intervals
reported on the table above.
With the recently-announced first resource estimate on the Carotare
target, Kimber is now reporting 1.6 million gold-equivalent resource ounces
(1.12 million ounces of Measured & Indicated, 499,000 ounces of Inferred) in
two deposits approximately two kilometres apart. With drill sites now
prepared, the first exploration holes on the El Orito Norte target, midway
between Carmen and Carotare, are expected to be completed during December.
Drilling on the Carotare target will resume in the New Year.

Robert Longe, P.Eng.
President & CEO

About Kimber

Kimber Resources Inc., which holds a 100% interest in the Monterde
property in the Sierra Madre of northern Mexico, is advancing the Carmen gold-
silver deposit towards feasibility, while drilling neighbouring epithermal
systems for additional resources. The Carmen deposit, an underground mine in
the 1930's, is a typical epithermal system: low sulphidation, oxidized, and
believed to be suitable for open pit mining. The adjacent epithermal systems
now being drilled, appear to be similar. For more information on the company
please visit SEDAR or our website at www.kimberresources.com.

Cautionary Statement
Mr. Alan Hitchborn, B.Sc., Vice President Development, manages the field
program of drilling and trenching on the Monterde project. Mr. J.B. Richards,
P.Eng., Vice President Engineering, and designated Qualified Person (Q.P.) for
the project is responsible for quality control and has verified the data
disclosed. He has determined that the laboratory reports matched the drill
sample logs and that the quality control assays fall within reasonable limits.
QA./QC procedures incorporate blanks and duplicates inserted at the drill site
and standards inserted after sample preparation. Drilling is by reverse
circulation. A one eighth split of each two-metre section of the drill hole,
weighing approximately 6 kg is processed by ALS Chemex at its preparation
laboratory in Hermosillo, Mexico. Pulps are analysed by ALS Chemex at its
laboratory in North Vancouver, British Columbia, using 50 gram subsamples,
fire assay with an AA finish for gold and four-acid digestion and ICP finish
for silver from a 0.4 gram subsample. Highgrade gold or silver intervals are
re-assayed by fire assay with gravimetric finish.

Statements in this release may be viewed as forward-looking statements.
Such statements involve risks and uncertainties that could cause actual
results to differ materially from those projected. There are no assurances the
Company can fulfill such forward-looking statements and the Company undertakes
no obligation to update such statements. Such forward-looking statements are
only predictions; actual events or results may differ materially as a result
of risks facing the Company, some of which are beyond the Company's control.

>>

Kimber Res Inc on 6ix

Earlier from Kimber Res

Later from Kimber Res

All Kimber Res news releases