Miller and Jubilee Update

The assay and drill highlights are:

• Surface reverse circulation drilling

  • Focused on sampling and assaying of the granodiorite/sediment contact with drill results up to 1.5 metres at 6.0 g/t Au and 13.71 g/t Ag in hole MMRC_2514.

    The complete set of drillhole assays is shown in Table A.

  • Surface sample in drill sump (Table B)

Rock Chip Samples may not reffect the average grade of mineralisation.

The drilling and returned assays indicate mineralisation at or close to the rock contacts. There is

likely to be a high nugget affect which may not be reflected in the drilling results but is evident in the historical gold grades and historical gold observed. This is further evidenced by the sample of the veins within the surface drill sump.

"The drilling confirms the contact of the granodiorite and metasediments exists along strike and down dip," said Transatlantic CEO Bernie Sostak. This maiden drill program also uncovered vein and contact extension to the south and north of the existing mine workings. The deposit remains open

along strike and at depth resulting in future drill target programs."

The relationship of downhole width to true width of mineralisation is unknown

Holes MMRC2511, 2515 to 2522, 2524 and 2525 returned no significant intercepts.

The drilling of holes 2518 to 2524 were to test if any grade in the waste dump, though one hole returned 1.5 metres at 5.49 g/t Au and will be reviewed further in 2026 with other dumps on the property.

Tables of the full results can be found in Appendix A (assays) and B (outcrop)

2021543552

0.5 m at 270 g/t Au

MMRC 2514

1.5 m at 6 g/t Au

Transatlantic drilled down dip of the existing levels and more than 100 metres along strike ,to the north and south of the mine footprint on the principal vein/contact. Transatlantic completed 2070 metres (m) in 25 holes for the phase 1 campaign.

The hole depth range was from 10 to 160 metres. Phase 1 comprises of a total of 25 holes. Of the 25 holes completed, eight have been drilled under the existing workings in the upper target area (Figure 2), ten have explored extension to the north and south and seven shallow holes have tested an old mine waste dump. The main target and focus is the vein/s on the contact of the sediment and granodiorite.

The drilling identified and extended the granodiorite -metasediment contact 200 metres to the north with Hole MMRC2504, an intersection of 1.5 metres at 5.76 g/t Au , 21.G4 g/t Ag and 150 metres to the south where MMRC2514 is situated with 1.5 metres at 6 g/t Au and 13.71 g/t Ag

With the known workings and the latest drilling, the contact has now been intersected over a strike of 500 metres.

The planned drilling (Lower Target Drilling) on the underground has been moved to 2026 as the permit expired for the 2025 drill season. An extension application has been submitted to the government bodies for the 2026 season.

discussing the company's drill results and future plans at Miller: Click HERE to register.

Drilling at the Golden Jubilee project previously disclosed Sept 8, 2025 was postponed due to oncoming winter weather conditions. Drill contractors were unable to safely mobilize before the interim permit terminated December 1, 2025. An extension to the interim permit will be sort by the company for drilling in 2026.

The Company is waiting on the outcome and results for the muon trial at the Anvil prospect.

The Miller Gold Mine is located in the Broadwater County in the State of Montana, USA. The mine is approximately 29 miles northeast of Townsend in Montana USA. The presence of gold

mineralisation has been confirmed by previous sampling in areas of the mine where access is possible. Transatlantic is earning into the historic Miller Gold Property by means of a gold

production royalty near Helena, Montana.

A historical Report (*) on the Miller Mine notes that historically, gold bearing ore was mined on a small scale by individual owners with sporadic production between 1901 and 1948. The mine is being re accessed by Transatlantic to review existing ground conditions and infrastructure for ongoing rehabilitation.

Located at the top end of the Confederate Gulch near what is now a ghost town in Diamond City, of which once had a population of + 10,000. Placer gold was abundant and rich in this Gulch.

• Miller had an average recovered mine grade of 7.94 Oz /ton Au (248 g/t Au) and 4.65 Oz /ton Ag (145 g/t Ag) (*)

• Hole #1 was drilled 300 feet below the lowest recorded workings and recorded 14.7 Oz /ton Au (516 g/t Au)

  The Miller Mine mineralisation occurs in quartz veins within and on the contact of a quartz granodiorite stockwork. The discrete veins dip between 30 and 80 degrees whilst the stockwork has multiple veinlets that range in width from a few centimetres to 2 metres. The contact zone of alteration has been noted as over 15 m wide (50 feet). Mining has been undertaken on both an open cut and underground methodology. The mine is at an elevation of 2000 m (6650 feet)

  Highlights of previous sampling (see news release dated June 14, 2023)

  Miller Mine -Lower Level

• Opened up Lower Winze Level immediately below the Lower Level.

• First grab samples from Lower Level Winze include 27.6 g/t Au (**), visual gold has also been observed.

• Extended Lease Agreement to first renewal term with option to purchase by production royalty.

Transatlantic has access to the Upper and Lower Level of the mine. The Miller Mine is situated amongst patented and unpatented claims at an elevation of 1920 m (6,400 feet) and accessible by roads 50 miles from Helena, Montana USA. Should mining occur at any time, an 8.5 % royalty on