Redmoor - Update to Historical Tin Results

About this update from Strategic Minerals Plc

  The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 ('MAR') which has been incorporated into UK law by the European Union (Withdrawal) Act 2018.     7 May 2026   Strategic Minerals plc ("Strategic Minerals" or the "Company") Redmoor - Update to Historical Tin Results Update to Previously Underreported Tin Assay Results Following Reanalysis; and Results from Additional Sampling of CRD040   Strategic Minerals (AIM: SML; USOTC: SMCDF), an international mineral exploration and production company, is pleased to provide an update on: analytical testworks focused on tin mineralisation following the completion of reanalysis of historical drill core pulp samples; and analysis from new drill core samples of historical and recent drill core from its Redmoor Tungsten-Tin-Copper Project ("Redmoor"), located in Cornwall, UK. Redmoor is being developed by the Company's wholly owned subsidiary, Cornwall Resources Limited ("CRL").   Highlights - Historical Sample Pulp Reanalysis   ·      428 samples collected as part of the relogging and sampling programme of historical CRL drillholes (2017-2018) and previously analysed using the analytical method ME-MS61 were reanalysed for tin ("Sn") using method ME-MS85h, following the change in analysis methodology for tin in cassiterite form reported during the 2025 drilling programme ( see RNS 10 November 2025), which showed method ME-MS85h was more appropriate for accurate reporting results for tin in cassiterite form . ·      These samples represent previously unrecognised mineralised zones identified through relogging and reanalysis, but primarily unmineralised and minor mineralised infill sections between historic sample intersections, and samples from more tungsten-dominant mineralised zones. ·      Re-analysis shows that 78% of the ME-MS85h results reported an increase in previously reported tin grades, including: o  An average increase of 280 parts per million ("ppm") in tin grade, representing moderate increases in most cases. o  Samples that originally assayed >500ppm report an average increase in tin grade of 15%. o  The 27 highest grading samples, which originally reported tin grades >0.14% Sn, report an average increase of 0.32% Sn, highlighting increases due to the improved digestion of cassiterite within more mineralised samples. ·      A smaller number of r esults highlighted new high grade tin intersections within and outside of the Redmoor Sheeted Vein System ("SVS"), including: 1.65 m @ 1.52% Sn from 273.1 m in CRD027 and; o  1.06 m @ 1.00% Sn from 235.00 m in CRD027 (previously reported as 0.01% Sn) o  1.75 m @ 0.49% Sn from 352.35 m in CRD027 (previously reported as 0.01% Sn) o  1.80 m @ 0.78% Sn from 163.10 m in CRD024 (previously reported as 0.02% Sn) o  1.10 m @ 0.78% Sn from 244.75 m in CRD029 (previously reported as 0.01% Sn) ·      Results include two wide and continuous intervals of tin mineralisation intercepted in 2018 drillholes, representing previously unrecognised intersections based on updated analytical methods: o  8.10 m @ 0.49% Sn from 269.45 m in CRD027 (not previously reported) o  10.85 m @ 0.33% Sn from 235.00 m in CRD029 (not previously reported) These results are not considered material to the recently published Mineral Resource Estimate ("MRE"). Highlights - Additional Sampling of CRD040 ·      Additional samples from CRD040 were selected, uphole of the SVS, for analysis following the previous identification of non-SVS mineralisation. Results indicate the potential extension of mineralisation associated with the intersection of the North Tin Zone and highlighting the presence of additional tin mineralisation between the SVS and North Tin Zone in CRD040, including: o  1.51 m @ 0.51% Sn from 286.49 m in sample CRL007079 o  1.00 m @ 0.33% Sn from 311.00 m in sample CRL007097 o  0.96 m @ 0.11% Sn and 0.16% WO3 from 252.00 m in CRL007054 Dennis Rowland, CRL Managing Director, said: "It is encouraging to see that the results from the reanalysis using the ME-MS85h method have confirmed the previous underreporting of tin values from historical drill core analysis through the use of a different analytical method. These new tin values do not materially affect the new Redmoor deposit model or 2026 MRE but will contribute towards the next model update. Results will primarily aid in the identification of narrow cassiterite-only tin veins outside of the currently defined SVS and MRE. "Reanalysis results continue to highlight the value add from our relogging and sampling programme. The programme continues with several aims, including a review of drillhole datasets, relogging and resampling remaining holes from CRL's 2017 programme, and infill sampling of highlighted sections of all CRL drillholes following the development of the new Redmoor deposit model. Additional samples from CRD040 highlight the potential for new mineralised zones to be generated or the potential for expansion of previously identified mineralised intersections. "While Redmoor is predominantly a tungsten project, tin is a valuable co-product and a vital mineral that underpins modern industry. "Further new samples and reanalysis samples from CRL's drill core have been shipped to ALS laboratories, Loughrea, Ireland, with the programme expected to continue alongside the ongoing drilling programme." Mark Burnett, Strategic Minerals' Executive Director, said: "The Redmoor team continue to add value to the project across multiple workstreams. The historical relogging and sampling programme together with the additional follow-up sampling of 2025 drill core is expected to continue to provide positive outputs alongside the new drilling programme. "We will see a significant increase in activity at Redmoor in the near term, with a scheduled ramp-up of the ongoing resource infill drilling programme, and initiation of further pre-feasibility study programme activities. Further information on the programmes will be delivered in due course."   Overview of additional analytical results for tin from historical drill core samples   As reported on 10 November 2025, an improvement in analytical methodology was implemented for analysis undertaken by ALS laboratories, Loughrea, Ireland, for CRL's samples specifically to capture tin grades with dominant cassiterite mineralisation. For drillhole CRD033, this modification proved its effectiveness, and therefore the use of method ME-MS85h for tin was implemented for all subsequent drillholes and samples from the 2025 programme. In addition, 428 samples that had originally been collected as part of the relogging and sampling programme of historical CRL drillholes (2017-2018) and analysed using the previous method (ME-MS61) were then reselected for analysis using ME-MS85h. Results show that 78% of the ME-MS85h results reported an increase in previously reported tin grades , and in a small number of cases significant increases in tin grades representing improved cassiterite digestion. The new tin assay results from these historical samples more clearly reflect the known polymetallic style of mineralisation within the 90 m thick SVS, and its constituent high-grade zones, which contributed to the 2026 MRE (See RNS 26 March 2026), and also improve tin grades, and potential extensions of the new North Tin Zone discovered during the 2025 drilling programme (see RNS 26 February 2026). These updated tin results do not materially affect the tonnage, grade or classification of the 2026 MRE for Redmoor, but will be incorporated into the next planned modelling update and MRE as part of the Company's PFS plan. The results do provide more definition of newly identified zones of mineralisation, and further metal content within the SVS high grade zones. See Table 1 for highlights of the downhole composites and Appendix 1 for a full breakdown of individual sample results that contribute to the highlighted intersections. Reported widths are downhole and true widths are not yet known. (a) Redmoor SVS Mineralised Intercepts DH I.D Sample Start From ( m) To ( m) Interval ( m) WO3 % Cu % Sn % WO3 eq. % CRD021 CRL004624-26 460.11 464.25 4.14 0.01 0.17 0.03 0.06 CRL004656-57 594.00 596.75 2.75 0.02 0.07 0.02 0.23 CRL004677 632.70 633.70 1.00 0.19 0.19 0.05 0.25 CRD022 CRL004604-06 384.00 388.00 6.00 0.03 0.24 0.26 0.18    incl. CRL004604 382.00 384.00 2.00 0.02 0.04 0.34 0.16    and CRL004606 386.00 388.00 2.00 0.01 0.42 0.38 0.24 CRD023 CRL004579-81 569.00 571.70 2.70 0.05 0.21 0.10 0.15 CRD024 CRL004536 326.90 328.15 1.25 0.00 0.42 0.00 0.22 CRL004548 429.44 430.62 1.18 0.19 0.33 0.08 0.28 CRL004559 619.20 620.30 1.10 0.19 0.02 0.00 0.20 CRL004570-73 639.25 645.00 5.75 0.18 0.13 0.04 0.22    incl. CRL004570 639.25 640.50 1.25 0.43 0.18 0.02 0.46    and CRL003193* 642.03 643.03 1.00 0.39 0.33 0.00 0.44 CRD025 CRL004517-19 391.50 394.50 3.00 0.13 0.20 0.02 0.17 CRL004523 440.95 441.95 1.00 0.30 0.05 0.00 0.31 (b) Non-SVS Mineralised Intercepts CRD024 CRL004531 163.10 164.90 1.80 0.07 0.06 0.78 0.39 CRD027 CRL004388-94 269.45 277.55 8.10 0.03 0.04 0.49 0.24    incl. CRL004392-93 273.10 276.27 3.17 0.05 0.05 0.94 0.43 CRL004395-97 297.00 300.50 3.50 0.00 0.07 0.15 0.08 CRL004512 352.35 354.10 1.75 0.00 0.01 0.49 0.20 CRD028 CRL004378-79 241.50 245.00 3.50 0.04 0.05 0.28 0.16 CRD029 CRL004302-11 235.00 245.85 10.85 0.00 0.14 0.33 0.16    incl. CRL004305-06 238.00 241.10 3.10 0.00 0.33 0.32 0.19 Table 1: Highlights of downhole composite sample intervals returned from recently received results from historical drill core samples, now including updated Sn results, and calculated WO 3 % Eq. Composited values use a downhole length weighted average of grades. The above intersections update those previously reported for tungsten (WO 3 ) and copper (Cu) (see RNS 7 May 2025) from historical drillholes with the addition of tin (Sn) values , coupled with the identification of new tin mineralised zones based on standout tin assays. The tin grades within the SVS intersections are consistent with those previously reported at Redmoor from the tungsten-dominant zones of the deposit. Sampling followed CRL's standard protocols, implementing the addition of analytical method ME-MS85h for Sn with XRF verification for samples reporting ≥0.14% on all previously analysed historical samples. All assays were performed by ALS Loughrea (ISO 17025). Snowden Optiro reviewed QA/QC; tin (Sn) results have passed QA/QC checks with no material issues identified and are reported following verification. The selected samples are considered representative of the mineralisation styles present and do not introduce material sampling bias. Overview of additional analytical results from drillhole CRD040   Following the publication of the Redmoor 2026 MRE, CRL has completed a review of the resource and new geological model to identify and select priority zones within existing CRL drill core with the potential to contain mineralisation. These zones will be logged and, where appropriate, sampled for analysis. Results are aimed at confirming extensions of mineralisation, such as the North Tin Zone, identifying further mineralisation, and further improving geological certainty. Through this process, 46 new samples from CRD040 were selected for analysis, with results highlighting additional tin-rich structures identified up-hole from the Redmoor SVS and downhole of the North Tin Zone in CRD040, coupled with extending the previously reported North Tin Zone intersection. Highlights from these results include: o  1.51 m @ 0.51% Sn from 286.49 m in sample CRL007079 o  1.00 m @ 0.33% Sn from 311.00 m in sample CRL007097 o  0.96 m @ 0.11% Sn and 0.16% WO 3 from 252.00 m in CRL007054 See Table 2 for highlights of the downhole composites and Appendix 2 for a full breakdown of individual sample results that contribute to the highlighted intersections. Reported widths are downhole. Sample Start   From (m) To (m) Interval (m) WO3 % Cu % Sn % Ag g/t WO3 eq. % CRL007054 252.00 252.96 0.96 0.16 0.11 0.11 1.62 0.23 CRL007079-81 286.49 289.00 2.51 0.02 0.09 0.34 1.59 0.18    incl. CRL007079 286.49 288.00 1.51 0.01 0.07 0.51 1.60 0.23 CRL007096-6668* 309.00 326.11 17.11 0.02 0.04 0.33 0.34 0.16    incl. CRL007097 311.00 312.00 1.00 0.01 0.05 0.33 0.53 0.15    incl. CRL006663-6665 317.23 322.00 4.77 0.06 0.06 0.74 0.47 0.37      cont. CRL006664 318.28 320.00 1.72 0.13 0.09 1.15 0.70 0.61    and CRL006668 325.30 326.11 0.81 0.04 0.04 0.26 0.36 0.16 Table 2: Highlights of downhole composite sample intervals returned from recently received results from CRD040, updated composites and calculated WO3% Eq. Composited values use a downhole length weighted average of grades. * Contains results previously reported in RNS dated 5 February 2026. These additional samples have also extended a previously reported North Tin Zone mineralised interval in CRD040 (see RNS 5 February 2026), with an originally reported interval showing 14.11 m @ 0.35% Sn, 0.03% WO 3 and 0.03% Cu from 312.00 m, now returning 17.11 m @ 0.33% Sn, 0.02% WO 3 and 0.04% Cu from 309.00 m. Additional tin-bearing structures were identified within the North Tin Zone, with a newly identified interval producing 2.51 m @ 0.34% Sn, 0.02% WO 3 and 0.09% Cu from 286.49 m. These results will be incorporated into any new Mineral Resource in the future and will instruct further sampling on historical drillcore and other recently drilled drillholes. Additional sampling of historical drillcore and programme updates   Through the purchase of a new CoreWise rotary diamond blade core saw, CRL has been able to accelerate its sampling of historical drillcore following the relogging process, with geological structures containing visible mineralisation sent to ALS Laboratories, Loughrea for analysis. Currently, CRL has 119 samples from historical drillcore awaiting analysis at ALS Loughrea, along with an additional 201 samples from CRD041, drilled during the 2025 drilling campaign, awaiting analysis. Additional samples from historical drillcore (CRD013 and CRD002) are currently being prepared for shipment to ALS for analysis. CRL has also sent samples to ALS Loughrea for analysis which were used in the recent ore sorting amenability study undertaken by TOMRA in Germany. The results from this analysis will inform CRL as to the effectiveness of ore sorting technology on any future potential ore from Redmoor and will form the basis for more comprehensive studies as part of the prefeasibility study programme.   Competent Person Statement: The information in this announcement that relates to Sampling Techniques and Data and Exploration Results has been reviewed and approved by Mr Laurie Hassall, MSci (Geology), FIMMM, QMR, FGS, who is a full-time employee of Snowden Optiro. Mr Hassall holds a Master of Science degree in Geology from the University of Southampton and is a Fellow of the Institute of Materials, Minerals and Mining (FIMMM), through which he is also accredited as Qualified for Minerals Reporting (QMR). He is also a Fellow of the Geological Society of London (FGS). Snowden Optiro has been engaged by Cornwall Resources Limited to provide independent technical advice. Mr Hassall, a full-time employee of Snowden Optiro, is acting as the Competent Person and is independent of Cornwall Resources Limited. He has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code), and under the AIM Rules. Mr Hassall consents to the inclusion in this announcement of the matters based on his information, in the form and context in which it appears. He confirms that, to the best of his knowledge, there is no new information or data that materially affects the information contained in previous market announcements, and that the form and context in which the information is presented has not been materially modified. For further information, please contact:   Strategic Minerals plc +44 (0) 207 389 7067 Mark Burnett Executive Director Website: www.strategicminerals.net Email: [email protected]     Follow Strategic Minerals on: X: @StrategicMnrls LinkedIn: https://www.linkedin.com/company/strategic-minerals-plc   SP Angel Corporate Finance LLP   +44 (0) 20 3470 0470 Nominated Adviser and Broker Matthew Johnson/ Charlie Bouverat/Grant Barker   Zeus Capital Limited Joint Broker Harry Ansell/Katy Mitchell +44 (0) 203 829 5000     Vigo Consulting +44 (0) 207 390 0234 Investor Relations Ben Simons/Seb Weller/Anna Sutton Email: [email protected]     Notes to Editors About Strategic Minerals plc and Cornwall Resources Limited Strategic Minerals plc (AIM: SML; USOTC: SMCDY) is an AIM-quoted, producing minerals company, actively developing strategic projects in the UK, United States and Australia. In 2019, the Company completed the 100% acquisition of Cornwall Resources Limited and the Redmoor Tungsten-Tin-Copper Project. The Redmoor Project is situated within the historically significant Tamar Valley Mining District in Cornwall, United Kingdom, with a JORC (2012) Compliant Inferred Mineral Resource Estimate published 26 March 2026: Resource category Domain Tonnage (Mt) NSR (US$/t) WO 3 Eq grade (%) WO 3 grade (%) Sn grade (%) Cu grade (%) Ag grade (g/t) Inferred Tungsten HGDs 7.30 499 0.98 0.83 0.12 0.53 7.0 Tin HGDs 1.95 208 0.44 0.14 0.50 0.50 7.6 Cu Domain SVS 8.02 196 0.40 0.28 0.13 0.34 4.3 Low Grade SVS 0.12 125 0.25 0.17 0.10 0.16 2.7 Total Inferred 17.40 324 0.65 0.49 0.17 0.44 5.8 Total Mineral Resources 17.40 324 0.65 0.49 0.17 0.44 5.8 The preceding statement of Mineral Resources conforms to the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code) 2012 Edition. All tonnages reported are dry metric tonnes. Minor discrepancies may occur due to rounding to appropriate significant figures.   More information on Cornwall Resources can be found at: https://www.cornwallresources.com In September 2011, Strategic Minerals acquired the distribution rights to the Cobre magnetite project in New Mexico, USA, through its wholly owned subsidiary Southern Minerals Group.  Cobre has been in production since 2012 and continues to provide a sustainable revenue stream for the Company. In March 2018, the Company completed the acquisition of the Leigh Creek Copper Mine situated in the copper rich belt of South Australia.  The Company has entered into an exclusive Call Option with South Pacific Mineral Investments Pty Ltd trading as Cuprum Metals to acquire 100% of the project. Appendix 1: Individual Sample Results Table for Composites Individual Laboratory Results Per Sample used to form highlighted composite intervals from tin pulp re-analyses Sample ranges and numbers in bold represent those listed in Table 1, above. Sample details include sample number, intersected depths and interval length. Results are reported for WO₃, Cu, Sn and Ag values, with a calculation to represent total metal on a WO₃ Equivalent (WO₃.Eq) basis. Sample Start From (m) To (m) Interval (m) WO 3 % Cu % Sn % Original Sn % New Ag g/t WO 3 eq. % CRL004302-11          CRL004302 235.00 236.06 1.06 0.00 0.02 0.01 1.00 0.40 0.41      CRL004303 236.06 237.16 1.10 0.00 0.00 0.00 0.01 0.26 0.01      CRL004304 237.16 238.00 0.84 0.00 0.41 0.01 0.11 3.43 0.12      CRL004305 238.00 239.70 1.70 0.00 0.59 0.03 0.36 5.37 0.25      CRL004306 239.70 241.10 1.40 0.00 0.02 0.01 0.29 0.37 0.12      CRL004307 241.10 242.10 1.00 0.00 0.01 0.01 0.14 0.18 0.06      CRL004308 242.10 243.85 1.75 0.00 0.01 0.00 0.03 0.09 0.02      CRL004309 243.85 244.75 0.90 0.00 0.03 0.02 0.42 0.54 0.18      CRL004311 244.75 245.85 1.10 0.01 0.03 0.01 0.78 0.44 0.32 CRL004375 237.50 239.00 1.50 0.03 0.03 0.03 0.35 0.31 0.18 CRL004378-79          CRL004378 241.50 243.00 1.50 0.02 0.04 0.03 0.21 0.24 0.11      CRL003293 243.00 243.98 0.98 0.09 0.05 0.18 0.49 0.00 0.29      CRL004379 243.98 245.00 1.02 0.02 0.06 0.02 0.19 0.71 0.11 CRL004388-94          CRL004388 269.45 270.70 1.25 0.02 0.07 0.04 0.19 0.34 0.11      CRL004389 270.70 272.00 1.30 0.05 0.05 0.36 0.37 0.30 0.21      CRL004391 272.00 273.10 1.10 0.02 0.02 0.02 0.22 0.09 0.11      CRL004392 273.10 274.75 1.65 0.06 0.06 0.03 1.52 0.36 0.68      CRL004393 274.75 276.27 1.52 0.04 0.05 0.02 0.30 0.30 0.17      CRL004394 276.27 277.55 1.28 0.00 0.00 0.01 0.03 0.03 0.01 CRL004395-97          CRL004395 297.00 298.00 1.00 0.00 0.13 0.01 0.15 1.70 0.09      CRL004396 298.00 299.00 1.00 0.00 0.00 0.01 0.01 0.19 0.01      CRL004397 299.00 300.50 1.50 0.00 0.07 0.01 0.24 1.43 0.11 CRL004512 352.35 354.10 1.75 0.00 0.01 0.01 0.49 0.39 0.20 CRL004517-19          CRL004517 391.50 392.50 1.00 0.02 0.16 0.00 0.02 1.81 0.05      CRL004518 392.50 393.50 1.00 0.03 0.42 0.01 0.03 3.57 0.12      CRL004519 393.50 394.50 1.00 0.33 0.03 0.01 0.01 0.53 0.34 CRL004523 440.95 441.95 1.00 0.30 0.05 0.00 0.00 0.23 0.31 CRL004531 163.10 164.90 1.80 0.07 0.06 0.02 0.78 0.52 0.39 CRL004536 326.90 328.15 1.25 0.00 0.42 0.00 0.00 36.40 0.22 CRL004548 429.44 430.62 1.18 0.19 0.33 0.02 0.08 2.90 0.28 CRL004559 619.20 620.30 1.10 0.19 0.02 0.00 0.00 0.13 0.20 CRL004570-73          CRL004570 639.25 640.50 1.25 0.43 0.18 0.02 0.02 0.99 0.46      CRL004571 640.50 642.03 1.53 0.02 0.03 0.11 0.11 0.11 0.07      CRL003193 642.03 643.03 1.00 0.39 0.33 0.00 0.00 0.00 0.44      CRL004572 643.03 644.00 0.97 0.09 0.11 0.01 0.00 1.38 0.12      CRL004573 644.00 645.00 1.00 0.02 0.06 0.00 0.00 1.23 0.03 CRL004579-81          CRL004579 569.00 570.50 1.50 0.06 0.16 0.11 0.10 6.20 0.15      CRL004581 570.50 571.70 1.20 0.04 0.28 0.13 0.11 5.22 0.15 CRL004604-06          CRL004604 382.00 384.00 2.00 0.02 0.04 0.03 0.34 0.53 0.16      CRL004605 384.00 386.00 2.00 0.06 0.27 0.02 0.07 3.46 0.14      CRL004606 386.00 388.00 2.00 0.01 0.42 0.02 0.38 4.60 0.24 CRL004624-26          CRL004624 460.11 461.45 1.34 0.01 0.14 0.01 0.02 2.44 0.05      CRL004625 461.45 463 1.55 0.01 0.10 0.01 0.02 1.78 0.04      CRL004626 463.00 464.25 1.25 0.00 0.30 0.01 0.04 4.40 0.08 CRL004656-57            CRL004656 594.00 595.75 1.75 0.23 0.08 0.02 0.02 2.47 0.26      CRL004657 595.75 596.75 1.00 0.14 0.06 0.00 0.00 9.27 0.19 CRL004677 632.70 633.70 1.00 0.19 0.19 0.06 0.05 2.89 0.25 Note: WO₃ is calculated from W results by applying a factor of 1.26 to the result) Note: WO 3 Eq has been calculated using the following formula: WO 3 _%+(Sn_%*0.403)+(Cu_%*0.133)+(Ag_ppm*0.0046)) Metal equivalence assumptions are consistent with those used in the 2026 MRE   Appendix 2: Individual Sample Results Table for Composites Individual Laboratory Results Per Sample used to form highlighted composite intervals in results from CRD040. Sample ranges and numbers in bold represent those listed in Table 1, above. Sample details include sample number, intersected depths and interval length. Results are reported for WO₃, Cu, Sn and Ag values, with a calculation to represent total metal on a WO₃ Equivalent (WO₃.Eq) basis. Sample Start From (m) To (m) Interval (m) WO3 % Cu % Sn % Ag (g/t) WO3 eq. % CRL007054 252.00 252.96 0.96 0.16 0.11 0.11 1.62 0.23 CRL007079-81        CRL007079 286.49 288.00 1.51 0.01 0.07 0.51 1.60 0.23      CRL007081 288.00 289.00 1.00 0.03 0.12 0.09 1.58 0.09 CRL007096-6668*      CRL007096 309.00 311.00 2.00 0.01 0.04 0.19 0.45 0.09      CRL007097 311.00 312.00 1.00 0.01 0.05 0.33 0.53 0.15      CRL006659 312.00 313.40 1.40 0.01 0.02 0.27 0.27 0.12      CRL006661 313.40 315.40 2.00 0.00 0.02 0.36 0.21 0.15      CRL006662 315.40 317.23 1.83 0.01 0.01 0.02 0.25 0.02      CRL006663 317.23 318.28 1.05 0.02 0.10 0.36 0.75 0.18      CRL006664 318.28 320.00 1.72 0.13 0.09 1.15 0.70 0.61      CRL006665 320.00 322.00 2.00 0.01 0.02 0.60 0.12 0.25      CRL006666 322.00 324.00 2.00 0.01 0.01 0.00 0.11 0.01      CRL006667 324.00 325.30 1.30 0.01 0.03 0.09 0.29 0.06      CRL006668 325.30 326.11 0.81 0.04 0.04 0.26 0.36 0.16  

View stock analysis, news, and events for Strategic Minerals Plc