Phase One Drill Results at the Trinity Silver Deposit, Pershing County, Nevada
White Rock, British Columbia CANADA, July 11, 2012 /FSC/ - Renaissance Gold Inc. (REN - TSX), is pleased to announce the phase one drill results provided by partner Liberty Silver Corp. (TSX: LSL, OTCBB: LBSV) ("Liberty Silver") at the Trinity Silver Property in Pershing County Nevada. This drilling program includes the initial holes designed to upgrade and expand the NI 43-101 compliant resource in the immediate pit area released in the technical report on February 15th, 2011. The program also includes significant step out tests that indicate the potential for expansion of the economic mineralization, particularly to the south and west where the main mineralization located to date is plunging to the SW.
Eighteen vertical reverse circulation drill holes were completed to depths of up to 1500 feet. All holes had reportable intercepts with a
minimum criteria of 10 feet of 0.5 opt Ag.
Richard Bedell President & CEO comments: "This drilling represents the growth of a valuable asset for the company. Further work in 2012 is going to focus on upgrading the resource. Also Liberty has started a program to assess going into production and to begin drilling on their 10 exploration targets. The geophysics recently reported (RenGold Press Release May 22, 2012) in conjunction with the drill holes reported here represent potential for significant long term growth. Renaissance will control 30% of the project and no additional funds are required until after bankable feasibility."
Exploration Highlights
Holes drilled outside of the defined resource include:
Hole A12-17 intersected 2 intervals in visually dominant oxide material: 40 feet of 1.96 opt Ag from 10 to 50 feet and 35 feet of 4.37 opt Ag from 130-165 feet including 20 feet of 7.05 opt Ag, which also includes 2 adjacent 5 foot intervals of 9.9 and 15.66 opt Ag.
Hole A12-10 intersected 15 feet of 4.48 opt Ag from 640-655 feet in visually dominant sulfide material. This includes 5 feet of 11.9 opt Ag.
Drilling indicates that the mineralization is dominantly oxide down to 165 feet expanding the potential for significant growth of oxide mineralization. Oxide mineralization results from all drill holes are on Appendix A to this press release.
Deeper in the system mineralization is dominantly sulfide and contains base metals of interest. Sulfide mineralization results from all drill holes are on Appendix B to this press release.
Confirmation Drilling
The NI 43-101 resource area (RenGold Press release February 28, 2011) is defined within the existing shallow open pit and its immediate vicinity based on a silver price of $17/oz.
The classified oxide mineral resource estimate is quoted at a cutoff grade of 0.65 oz/ton silver and consists of an inferred resource of 2,605,000 ounces silver at an average grade of 1.37 oz/ton (1,901,000 tons).
The classified sulfide mineral resource estimate is quoted at a cutoff grade of 1.30 oz/ton silver consists of an inferred resource of 9,036,000 ounces silver at an average grade of 1.69 oz/ton (5,336,000 tons).
Holes within the defined inferred resource area include A12-4 and A12-5 which contain multiple intervals of sulfide and each hole has a long run of oxide including 65 feet of 1.15 opt Ag oxide (including 15 feet of 1.86 opt Ag) in A12-4 and 85 feet of 0.99 opt Ag oxide (including 25 feet of 1.46 opt Ag) in A12-5.
QAQC
All drill hole samples were analyzed by ICP-MS by American Assay Laboratories, Reno, Nevada. Analytical precision and accuracy were monitored by Minerals Exploration and Environmental Quality, Reno, Nevada. Drill hole sample collection by the driller, Boart Longyear, Elko, Nevada, was supervised by a senior Liberty Silver geologist and chain of custody throughout the program was unbroken. Drill hole deviation surveys were done by IDS, Elko, Nevada.
Trinity Mining District History
In addition to 18 holes described above, approximately 395 holes were drilled during the period from 1982-2007 mainly by US Borax. While approximately 50 of these holes are widely spaced throughout the joint venture's 13 square-mile area of interest, the large majority are located within an approximate one square mile area centered on the Trinity open pit silver mine. Based on historical and current assays, all holes contain anomalous silver throughout.
Liberty Silver Inc. Earn-in agreement
Liberty Silver Corp. is required to expend a minimum of US$5,000,000 and complete a bankable feasibility study by March 29, 2016 to earn an undivided 70% interest in the property, subject to the underlying minerals lease agreement with Newmont Mining Corporation.
Qualified Person
All data disclosed in this press release, including sampling, analytical and test data have been reviewed by the Company's qualified person Mr. Eric M. Struhsacker, M.Sc., and Certified Professional Geologist as recognized by the American Institute of Professional Geologists.
About Renaissance Gold Inc.
Renaissance Gold Inc. is a gold/silver exploration company that has a large portfolio of exploration projects in Nevada, Utah, Argentina and Spain. Many of the projects are in exploration earn-in agreements with industry partners who provide exploration funding. RenGold applies the extensive exploration experience and high-end technical skills of its founders and team members to search for and acquire new precious metal exploration projects that are then offered for joint venture.
Renaissance Gold Inc.
By: Richard L. Bedell, President and CEO
For further information, contact:
Richard L. Bedell, 775-337-1545, rbedell@rengold.com, or Eric Struhsacker, 775-337-1545, estruhsacker@rengold.com
This news release contains certain statements that may be deemed "forward-looking" statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential" and similar expressions, or that events or conditions "will", "would", "may", "could" or "should" occur. Although Renaissance Gold Inc. believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in forward looking statements. Forward looking statements are based on the beliefs, estimates and opinions of Renaissance Gold Inc's management on the date the statements are made. Except as required by law, Renaissance Gold Inc. undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.
Appendix A
The following table summarizes the oxide mineralization encountered in the drilling:
-***-
-----------------------------------------------------
Hole From To Interval Interval Ag Ag
Name (feet) (feet) (feet) (meters) opt g/t
-----------------------------------------------------
A12-1 none
-----------------------------------------------------
A12-2 80.0 90.0 10 3.0 1.02 31.72
-----------------------------------------------------
A12-3 105.0 115.0 10 3.0 0.76 23.64
-----------------------------------------------------
A12-4 30.0 95.0 65 19.8 1.15 35.77
-----------------------------------------------------
inc 60.0 90.0 30 9.1 1.45 45.10
-----------------------------------------------------
inc 75.0 90.0 15 4.6 1.86 57.85
-----------------------------------------------------
110.0 120.0 10 3.0 0.87 27.06
-----------------------------------------------------
A12-5 10.0 95.0 85 25.9 0.99 30.79
-----------------------------------------------------
inc 70.0 95.0 25 7.6 1.46 45.41
-----------------------------------------------------
A12-6 0.0 none
-----------------------------------------------------
A12-7 10.0 85.0 75 22.9 0.82 25.50
-----------------------------------------------------
inc 60.0 75.0 15 4.6 1.13 35.14
-----------------------------------------------------
A12-8 0.0 none
-----------------------------------------------------
A12-9 0.0 none
-----------------------------------------------------
A12-10 125.0 150.0 25 7.6 0.57 17.73
-----------------------------------------------------
A12-11 10.0 65.0 55 16.8 1.12 34.83
-----------------------------------------------------
inc 10.0 45.0 35 10.7 1.38 42.92
-----------------------------------------------------
140.0 150.0 10 3.0 0.62 19.28
-----------------------------------------------------
A12-12 15.0 45.0 30 9.1 0.63 19.59
-----------------------------------------------------
60.0 85.0 25 7.6 0.71 22.08
-----------------------------------------------------
125.0 145.0 20 6.1 0.9 27.99
-----------------------------------------------------
inc 125.0 135.0 10 3.0 1.22 37.94
-----------------------------------------------------
A12-13 20.0 140.0 120 36.6 0.69 21.46
-----------------------------------------------------
inc 110.0 120.0 10 3.0 1.14 35.45
-----------------------------------------------------
A12-14 15.0 75.0 60 18.3 0.71 22.08
-----------------------------------------------------
inc 15.0 25.0 10 3.0 1.26 39.19
-----------------------------------------------------
110.0 130.0 20 6.1 0.79 24.57
-----------------------------------------------------
155.0 205.0 50 15.2 0.75 23.33
-----------------------------------------------------
A12-15 20.0 45.0 25 7.6 0.9 27.99
-----------------------------------------------------
inc 30.0 45.0 15 4.6 1.07 33.28
-----------------------------------------------------
140.0 165.0 25 7.6 0.57 17.73
-----------------------------------------------------
A12-16 85.0 95.0 10 3.0 0.54 16.79
-----------------------------------------------------
155.0 165.0 10 3.0 0.69 21.46
-----------------------------------------------------
A12-17 10.0 50.0 40 12.2 1.96 60.96
-----------------------------------------------------
inc 10.0 30.0 20 6.1 3.27 101.70
-----------------------------------------------------
100.0 115.0 15 4.6 0.93 28.92
-----------------------------------------------------
130.0 165.0 35 10.7 4.37 135.91
-----------------------------------------------------
inc 145.0 165.0 20 6.1 7.05 219.26
-----------------------------------------------------
inc 150.0 155.0 5 1.5 9.9 308.00
-----------------------------------------------------
inc 155.0 160.0 5 1.5 15.66 487.00
-----------------------------------------------------
A12-18 15.0 30.0 15 4.6 0.56 17.42
-----------------------------------------------------
80.0 95.0 15 4.6 0.78 24.26
-----------------------------------------------------
-****-
Appendix B
The following table summarizes the sulfide mineralization encountered in the drilling:
-***-
-------------------------------------------------------------------------
Hole From To Interval Interval Ag Ag Pb Zn Cu
Name (feet) (feet) (feet) (meters) opt g/t % % %
-------------------------------------------------------------------------
A12-1 520 565 45 13.72 1.04 32.34 0.05 0.04 -
-------------------------------------------------------------------------
575 585 10 3.05 1.76 54.74 0.13 0.12 -
-------------------------------------------------------------------------
790 800 10 3.05 0.64 19.90 0.02 0.02 -
-------------------------------------------------------------------------
1000 1010 10 3.05 3.18 98.90 0.03 0.04 -
------------------------------------------------------------------------- 1010 1045 35 10.67 1.07 33.28 0.01 0.02 -
-------------------------------------------------------------------------
A12-2 475 490 15 4.57 0.76 23.64 0.04 0.03
-------------------------------------------------------------------------
635 645 10 3.05 0.71 22.08 0.02 0.03 -
-------------------------------------------------------------------------
A12-3 205 225 20 6.10 0.58 18.04 0.02 0.05 -
------------------------------------------------------------------------- 420 450 30 9.15 1.31 40.74 0.10 0.08 -
-------------------------------------------------------------------------
inc 425 435 10 3.05 2.05 63.76 0.20 0.15 -
-------------------------------------------------------------------------
A12-4 155 165 10 3.05 1.24 38.56 0.06 0.11 -
-------------------------------------------------------------------------
180 190 10 3.05 0.74 23.01 0.06 0.11 -
------------------------------------------------------------------------- 205 240 35 10.67 1.78 55.36 0.09 0.10 -
------------------------------------------------------------------------- 295 305 10 3.05 0.74 23.01 0.10 0.13 -
-------------------------------------------------------------------------
310 330 20 6.10 1.2 37.32 0.15 0.20 -
-------------------------------------------------------------------------
inc 310 320 10 3.05 1.8 55.98 0.18 0.29 -
-------------------------------------------------------------------------
345 400 55 16.77 1.57 48.83 0.17 0.15 -
-------------------------------------------------------------------------
410 435 25 7.62 0.72 22.39 0.25 0.20 -
-------------------------------------------------------------------------
inc 435 445 10 3.05 1.64 51.00 0.11 0.10 -
-------------------------------------------------------------------------
555 570 15 4.57 1.7 52.87 0.14 0.10 -
-------------------------------------------------------------------------
A12-5 95 120 25 7.62 1.68 52.25 0.08 0.15 -
------------------------------------------------------------------------- 225 240 15 4.57 0.53 16.48 0.14 0.19 -
-------------------------------------------------------------------------
280 305 25 7.62 0.6 18.66 0.43 0.33 0.01
-------------------------------------------------------------------------
545 565 20 6.10 0.63 19.59 0.77 1.00 0.02
-------------------------------------------------------------------------
640 650 10 3.05 0.55 17.11 0.51 0.41 0.01
-------------------------------------------------------------------------
A12-6 695 715 20 6.10 1.56 48.52 0.12 0.08 -
-------------------------------------------------------------------------
inc 705 715 10 3.05 2.68 83.35 0.21 0.13 -
-------------------------------------------------------------------------
745 760 15 4.57 1.49 46.34 0.08 0.08 -
-------------------------------------------------------------------------
A12-7 515 545 30 9.15 0.73 22.70 0.83 0.75 0.02
-------------------------------------------------------------------------
745 775 30 9.15 0.61 18.97 0.83 0.66 0.03
-------------------------------------------------------------------------
785 795 10 3.05 1 31.10 0.34 0.29 0.01
-------------------------------------------------------------------------
A12-8 620 635 15 4.57 1.35 41.99 0.03 0.04 -
-------------------------------------------------------------------------
A12-9 630 640 10 3.05 1.1 34.21 0.08 0.06 -
-------------------------------------------------------------------------
A12-10 640 655 15 4.57 4.48 139.33 0.11 0.10 -
-------------------------------------------------------------------------
inc 640 645 5 1.52 11.9 370.00 0.28 0.23 0.01
-------------------------------------------------------------------------
A12-11 505 515 10 3.05 0.94 29.23 1.30 0.65 -
-------------------------------------------------------------------------
A12-12 0.00 none -
-------------------------------------------------------------------------
A12-13 300 315 15 4.57 4.16 129.38 0.10 0.08 -
------------------------------------------------------------------------- 440 460 20 6.10 1.15 35.77 0.11 0.11 -
-------------------------------------------------------------------------
485 495 10 3.05 0.59 18.35 0.30 0.26 -
-------------------------------------------------------------------------
510 540 30 9.15 0.98 30.48 0.53 0.32 -
-------------------------------------------------------------------------
980 990 10 3.05 1.41 43.85 0.12 0.18 -
-------------------------------------------------------------------------
A12-14 365 380 15 4.57 0.77 23.95 0.37 0.31 -
-------------------------------------------------------------------------
A12-15 305 315 10 3.05 0.54 16.79 0.41 0.34 -
-------------------------------------------------------------------------
365 375 10 3.05 0.96 29.86 0.18 0.06 -
-------------------------------------------------------------------------
390 450 60 18.29 1.06 32.97 0.16 0.09 -
-------------------------------------------------------------------------
760 780 20 6.10 0.69 21.46 0.44 0.49 0.01
-------------------------------------------------------------------------
A12-16 165 180 15 4.57 0.78 24.26 0.06 0.09 -
-------------------------------------------------------------------------
405 415 10 3.05 0.62 19.28 0.04 0.03 -
-------------------------------------------------------------------------
495 505 10 3.05 0.68 21.15 0.23 0.18 -
-------------------------------------------------------------------------
A12-17 165 180 15 4.57 1 31.10 0.33 0.26 0.01
-------------------------------------------------------------------------
A12-18 0.00 none
-------------------------------------------------------------------------
-****-
To view this release as a webpage, please click on the following link:
http://www.usetdas.com/pr/renaissancegold07112012.htm
Source: Renaissance Gold Inc. (TSX: REN) http://www.rengold.com
Maximum News Dissemination by FSCwire. http://www.fscwire.com
White Rock, British Columbia CANADA, July 11, 2012 /FSC/ - Renaissance Gold Inc. (REN - TSX), is pleased to announce the phase one drill results provided by partner Liberty Silver Corp. (TSX: LSL, OTCBB: LBSV) ("Liberty Silver") at the Trinity Silver Property in Pershing County Nevada. This drilling program includes the initial holes designed to upgrade and expand the NI 43-101 compliant resource in the immediate pit area released in the technical report on February 15th, 2011. The program also includes significant step out tests that indicate the potential for expansion of the economic mineralization, particularly to the south and west where the main mineralization located to date is plunging to the SW.
Eighteen vertical reverse circulation drill holes were completed to depths of up to 1500 feet. All holes had reportable intercepts with a
minimum criteria of 10 feet of 0.5 opt Ag.
Richard Bedell President & CEO comments: "This drilling represents the growth of a valuable asset for the company. Further work in 2012 is going to focus on upgrading the resource. Also Liberty has started a program to assess going into production and to begin drilling on their 10 exploration targets. The geophysics recently reported (RenGold Press Release May 22, 2012) in conjunction with the drill holes reported here represent potential for significant long term growth. Renaissance will control 30% of the project and no additional funds are required until after bankable feasibility."
Exploration Highlights
Holes drilled outside of the defined resource include:
Hole A12-17 intersected 2 intervals in visually dominant oxide material: 40 feet of 1.96 opt Ag from 10 to 50 feet and 35 feet of 4.37 opt Ag from 130-165 feet including 20 feet of 7.05 opt Ag, which also includes 2 adjacent 5 foot intervals of 9.9 and 15.66 opt Ag.
Hole A12-10 intersected 15 feet of 4.48 opt Ag from 640-655 feet in visually dominant sulfide material. This includes 5 feet of 11.9 opt Ag.
Drilling indicates that the mineralization is dominantly oxide down to 165 feet expanding the potential for significant growth of oxide mineralization. Oxide mineralization results from all drill holes are on Appendix A to this press release.
Deeper in the system mineralization is dominantly sulfide and contains base metals of interest. Sulfide mineralization results from all drill holes are on Appendix B to this press release.
Confirmation Drilling
The NI 43-101 resource area (RenGold Press release February 28, 2011) is defined within the existing shallow open pit and its immediate vicinity based on a silver price of $17/oz.
The classified oxide mineral resource estimate is quoted at a cutoff grade of 0.65 oz/ton silver and consists of an inferred resource of 2,605,000 ounces silver at an average grade of 1.37 oz/ton (1,901,000 tons).
The classified sulfide mineral resource estimate is quoted at a cutoff grade of 1.30 oz/ton silver consists of an inferred resource of 9,036,000 ounces silver at an average grade of 1.69 oz/ton (5,336,000 tons).
Holes within the defined inferred resource area include A12-4 and A12-5 which contain multiple intervals of sulfide and each hole has a long run of oxide including 65 feet of 1.15 opt Ag oxide (including 15 feet of 1.86 opt Ag) in A12-4 and 85 feet of 0.99 opt Ag oxide (including 25 feet of 1.46 opt Ag) in A12-5.
QAQC
All drill hole samples were analyzed by ICP-MS by American Assay Laboratories, Reno, Nevada. Analytical precision and accuracy were monitored by Minerals Exploration and Environmental Quality, Reno, Nevada. Drill hole sample collection by the driller, Boart Longyear, Elko, Nevada, was supervised by a senior Liberty Silver geologist and chain of custody throughout the program was unbroken. Drill hole deviation surveys were done by IDS, Elko, Nevada.
Trinity Mining District History
In addition to 18 holes described above, approximately 395 holes were drilled during the period from 1982-2007 mainly by US Borax. While approximately 50 of these holes are widely spaced throughout the joint venture's 13 square-mile area of interest, the large majority are located within an approximate one square mile area centered on the Trinity open pit silver mine. Based on historical and current assays, all holes contain anomalous silver throughout.
Liberty Silver Inc. Earn-in agreement
Liberty Silver Corp. is required to expend a minimum of US$5,000,000 and complete a bankable feasibility study by March 29, 2016 to earn an undivided 70% interest in the property, subject to the underlying minerals lease agreement with Newmont Mining Corporation.
Qualified Person
All data disclosed in this press release, including sampling, analytical and test data have been reviewed by the Company's qualified person Mr. Eric M. Struhsacker, M.Sc., and Certified Professional Geologist as recognized by the American Institute of Professional Geologists.
About Renaissance Gold Inc.
Renaissance Gold Inc. is a gold/silver exploration company that has a large portfolio of exploration projects in Nevada, Utah, Argentina and Spain. Many of the projects are in exploration earn-in agreements with industry partners who provide exploration funding. RenGold applies the extensive exploration experience and high-end technical skills of its founders and team members to search for and acquire new precious metal exploration projects that are then offered for joint venture.
Renaissance Gold Inc.
By: Richard L. Bedell, President and CEO
For further information, contact:
Richard L. Bedell, 775-337-1545, rbedell@rengold.com, or Eric Struhsacker, 775-337-1545, estruhsacker@rengold.com
This news release contains certain statements that may be deemed "forward-looking" statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential" and similar expressions, or that events or conditions "will", "would", "may", "could" or "should" occur. Although Renaissance Gold Inc. believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in forward looking statements. Forward looking statements are based on the beliefs, estimates and opinions of Renaissance Gold Inc's management on the date the statements are made. Except as required by law, Renaissance Gold Inc. undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.
Appendix A
The following table summarizes the oxide mineralization encountered in the drilling:
-***-
-----------------------------------------------------
Hole From To Interval Interval Ag Ag
Name (feet) (feet) (feet) (meters) opt g/t
-----------------------------------------------------
A12-1 none
-----------------------------------------------------
A12-2 80.0 90.0 10 3.0 1.02 31.72
-----------------------------------------------------
A12-3 105.0 115.0 10 3.0 0.76 23.64
-----------------------------------------------------
A12-4 30.0 95.0 65 19.8 1.15 35.77
-----------------------------------------------------
inc 60.0 90.0 30 9.1 1.45 45.10
-----------------------------------------------------
inc 75.0 90.0 15 4.6 1.86 57.85
-----------------------------------------------------
110.0 120.0 10 3.0 0.87 27.06
-----------------------------------------------------
A12-5 10.0 95.0 85 25.9 0.99 30.79
-----------------------------------------------------
inc 70.0 95.0 25 7.6 1.46 45.41
-----------------------------------------------------
A12-6 0.0 none
-----------------------------------------------------
A12-7 10.0 85.0 75 22.9 0.82 25.50
-----------------------------------------------------
inc 60.0 75.0 15 4.6 1.13 35.14
-----------------------------------------------------
A12-8 0.0 none
-----------------------------------------------------
A12-9 0.0 none
-----------------------------------------------------
A12-10 125.0 150.0 25 7.6 0.57 17.73
-----------------------------------------------------
A12-11 10.0 65.0 55 16.8 1.12 34.83
-----------------------------------------------------
inc 10.0 45.0 35 10.7 1.38 42.92
-----------------------------------------------------
140.0 150.0 10 3.0 0.62 19.28
-----------------------------------------------------
A12-12 15.0 45.0 30 9.1 0.63 19.59
-----------------------------------------------------
60.0 85.0 25 7.6 0.71 22.08
-----------------------------------------------------
125.0 145.0 20 6.1 0.9 27.99
-----------------------------------------------------
inc 125.0 135.0 10 3.0 1.22 37.94
-----------------------------------------------------
A12-13 20.0 140.0 120 36.6 0.69 21.46
-----------------------------------------------------
inc 110.0 120.0 10 3.0 1.14 35.45
-----------------------------------------------------
A12-14 15.0 75.0 60 18.3 0.71 22.08
-----------------------------------------------------
inc 15.0 25.0 10 3.0 1.26 39.19
-----------------------------------------------------
110.0 130.0 20 6.1 0.79 24.57
-----------------------------------------------------
155.0 205.0 50 15.2 0.75 23.33
-----------------------------------------------------
A12-15 20.0 45.0 25 7.6 0.9 27.99
-----------------------------------------------------
inc 30.0 45.0 15 4.6 1.07 33.28
-----------------------------------------------------
140.0 165.0 25 7.6 0.57 17.73
-----------------------------------------------------
A12-16 85.0 95.0 10 3.0 0.54 16.79
-----------------------------------------------------
155.0 165.0 10 3.0 0.69 21.46
-----------------------------------------------------
A12-17 10.0 50.0 40 12.2 1.96 60.96
-----------------------------------------------------
inc 10.0 30.0 20 6.1 3.27 101.70
-----------------------------------------------------
100.0 115.0 15 4.6 0.93 28.92
-----------------------------------------------------
130.0 165.0 35 10.7 4.37 135.91
-----------------------------------------------------
inc 145.0 165.0 20 6.1 7.05 219.26
-----------------------------------------------------
inc 150.0 155.0 5 1.5 9.9 308.00
-----------------------------------------------------
inc 155.0 160.0 5 1.5 15.66 487.00
-----------------------------------------------------
A12-18 15.0 30.0 15 4.6 0.56 17.42
-----------------------------------------------------
80.0 95.0 15 4.6 0.78 24.26
-----------------------------------------------------
-****-
Appendix B
The following table summarizes the sulfide mineralization encountered in the drilling:
-***-
-------------------------------------------------------------------------
Hole From To Interval Interval Ag Ag Pb Zn Cu
Name (feet) (feet) (feet) (meters) opt g/t % % %
-------------------------------------------------------------------------
A12-1 520 565 45 13.72 1.04 32.34 0.05 0.04 -
-------------------------------------------------------------------------
575 585 10 3.05 1.76 54.74 0.13 0.12 -
-------------------------------------------------------------------------
790 800 10 3.05 0.64 19.90 0.02 0.02 -
-------------------------------------------------------------------------
1000 1010 10 3.05 3.18 98.90 0.03 0.04 -
------------------------------------------------------------------------- 1010 1045 35 10.67 1.07 33.28 0.01 0.02 -
-------------------------------------------------------------------------
A12-2 475 490 15 4.57 0.76 23.64 0.04 0.03
-------------------------------------------------------------------------
635 645 10 3.05 0.71 22.08 0.02 0.03 -
-------------------------------------------------------------------------
A12-3 205 225 20 6.10 0.58 18.04 0.02 0.05 -
------------------------------------------------------------------------- 420 450 30 9.15 1.31 40.74 0.10 0.08 -
-------------------------------------------------------------------------
inc 425 435 10 3.05 2.05 63.76 0.20 0.15 -
-------------------------------------------------------------------------
A12-4 155 165 10 3.05 1.24 38.56 0.06 0.11 -
-------------------------------------------------------------------------
180 190 10 3.05 0.74 23.01 0.06 0.11 -
------------------------------------------------------------------------- 205 240 35 10.67 1.78 55.36 0.09 0.10 -
------------------------------------------------------------------------- 295 305 10 3.05 0.74 23.01 0.10 0.13 -
-------------------------------------------------------------------------
310 330 20 6.10 1.2 37.32 0.15 0.20 -
-------------------------------------------------------------------------
inc 310 320 10 3.05 1.8 55.98 0.18 0.29 -
-------------------------------------------------------------------------
345 400 55 16.77 1.57 48.83 0.17 0.15 -
-------------------------------------------------------------------------
410 435 25 7.62 0.72 22.39 0.25 0.20 -
-------------------------------------------------------------------------
inc 435 445 10 3.05 1.64 51.00 0.11 0.10 -
-------------------------------------------------------------------------
555 570 15 4.57 1.7 52.87 0.14 0.10 -
-------------------------------------------------------------------------
A12-5 95 120 25 7.62 1.68 52.25 0.08 0.15 -
------------------------------------------------------------------------- 225 240 15 4.57 0.53 16.48 0.14 0.19 -
-------------------------------------------------------------------------
280 305 25 7.62 0.6 18.66 0.43 0.33 0.01
-------------------------------------------------------------------------
545 565 20 6.10 0.63 19.59 0.77 1.00 0.02
-------------------------------------------------------------------------
640 650 10 3.05 0.55 17.11 0.51 0.41 0.01
-------------------------------------------------------------------------
A12-6 695 715 20 6.10 1.56 48.52 0.12 0.08 -
-------------------------------------------------------------------------
inc 705 715 10 3.05 2.68 83.35 0.21 0.13 -
-------------------------------------------------------------------------
745 760 15 4.57 1.49 46.34 0.08 0.08 -
-------------------------------------------------------------------------
A12-7 515 545 30 9.15 0.73 22.70 0.83 0.75 0.02
-------------------------------------------------------------------------
745 775 30 9.15 0.61 18.97 0.83 0.66 0.03
-------------------------------------------------------------------------
785 795 10 3.05 1 31.10 0.34 0.29 0.01
-------------------------------------------------------------------------
A12-8 620 635 15 4.57 1.35 41.99 0.03 0.04 -
-------------------------------------------------------------------------
A12-9 630 640 10 3.05 1.1 34.21 0.08 0.06 -
-------------------------------------------------------------------------
A12-10 640 655 15 4.57 4.48 139.33 0.11 0.10 -
-------------------------------------------------------------------------
inc 640 645 5 1.52 11.9 370.00 0.28 0.23 0.01
-------------------------------------------------------------------------
A12-11 505 515 10 3.05 0.94 29.23 1.30 0.65 -
-------------------------------------------------------------------------
A12-12 0.00 none -
-------------------------------------------------------------------------
A12-13 300 315 15 4.57 4.16 129.38 0.10 0.08 -
------------------------------------------------------------------------- 440 460 20 6.10 1.15 35.77 0.11 0.11 -
-------------------------------------------------------------------------
485 495 10 3.05 0.59 18.35 0.30 0.26 -
-------------------------------------------------------------------------
510 540 30 9.15 0.98 30.48 0.53 0.32 -
-------------------------------------------------------------------------
980 990 10 3.05 1.41 43.85 0.12 0.18 -
-------------------------------------------------------------------------
A12-14 365 380 15 4.57 0.77 23.95 0.37 0.31 -
-------------------------------------------------------------------------
A12-15 305 315 10 3.05 0.54 16.79 0.41 0.34 -
-------------------------------------------------------------------------
365 375 10 3.05 0.96 29.86 0.18 0.06 -
-------------------------------------------------------------------------
390 450 60 18.29 1.06 32.97 0.16 0.09 -
-------------------------------------------------------------------------
760 780 20 6.10 0.69 21.46 0.44 0.49 0.01
-------------------------------------------------------------------------
A12-16 165 180 15 4.57 0.78 24.26 0.06 0.09 -
-------------------------------------------------------------------------
405 415 10 3.05 0.62 19.28 0.04 0.03 -
-------------------------------------------------------------------------
495 505 10 3.05 0.68 21.15 0.23 0.18 -
-------------------------------------------------------------------------
A12-17 165 180 15 4.57 1 31.10 0.33 0.26 0.01
-------------------------------------------------------------------------
A12-18 0.00 none
-------------------------------------------------------------------------
-****-
To view this release as a webpage, please click on the following link:
http://www.usetdas.com/pr/renaissancegold07112012.htm
Source: Renaissance Gold Inc. (TSX: REN) http://www.rengold.com
Maximum News Dissemination by FSCwire. http://www.fscwire.com