Canadian Arrow Mines LtdTSXV: CRO

Kenbridge deep drilling returns 7.21% Ni over 5.5 metres

· Issued by Canadian Arrow Mines Ltd via CNW

SUDBURY, ON, Feb. 28 /CNW/ - Canadian Arrow Mines, Ltd. (CRO: TSX-V) (the "Company") reports an exceptional intersection of high grade nickel copper mineralization from drilling at the Kenbridge Nickel Project in Northwestern Ontario. Diamond drill hole KB-07-180 assayed 2.95% Ni, 0.82% Cu, 0.07% Co over a core length of 21.5 metres, including a high grade section of 7.21% Ni, 0.67% Cu, 0.19% Co over 5.5 metres. This is the deepest hole that Arrow has completed on Kenbridge to date, with the intersection situated approximately 300 metres below the surface.

Assay highlights for 11 drill holes include:

-  KB-07-180 - 2.95% Ni, 0.82% Cu, 0.07% Co over 21.5 m
   -  including 4.85% Ni, 0.84% Cu, over 11.5m
   -  including 7.2% Ni, 0.67% Cu, over 5.5 m

-  KB-07-142 - 1.01% Ni, 0.46% Cu over a core length of 16.7 m
   -  Including 2.87% Ni, 1.23% Cu, over 3.0 m

-  KB-07-155 - 1.89% Ni, 0.24% Cu over 4.5m

-  KB-07-168 - 1.16% Ni, 0.38% Cu over 6.4 m

Commenting on the results Todd Keast Vice President Exploration of the Company stated "Diamond drilling is now targeting the interval between the 160m level and the 400m level. The drill results reported here are all below the bottom of the proposed open pit portion of the deposit. Hole KB-07-180 is the best hole we've drilled on the property to date, showing excellent width and exceptionally high grades. These recent results demonstrate the excellent continuity of the deposit at depth while also highlighting zones of nickel rich mineralization. The presence of high grade nickel-copper-cobalt intersections, when combined with the existing 2,000' shaft, points to significant opportunities for mine scheduling in the early years of mining operations. While we continue to focus our efforts on the Kenbridge Nickel Deposit, we have recently commenced drilling on other prospective targets near the Kenbridge property and look forward to these results."

Assay Results:

Hole         From      To      Length      Ni%      Cu%      Co%
KB-07-137    196.0    203.0      7.0       1.04     0.64     0.03
KB-07-142    231.5    248.2     16.7       1.01     0.46     0.03
KB-07-142    231.5    241.3      9.8       1.57     0.64     0.05
KB-07-142    231.5    234.5      3.0       2.87     1.23     0.08
KB-07-148    285.7    288.4      2.7       1.50     0.50     0.04
KB-07-153    151.3    153.5      2.3       0.98     0.62     0.03
KB-07-153    185.5    188.2      2.7       1.09     0.64     0.03
KB-07-154    163.7    166.8      3.1       1.06     0.39     0.03
KB-07-155    203.4    207.9      4.5       1.89     0.24     0.05
KB-07-155    204.4    207.0      2.6       2.84     0.25     0.07
KB-07-156    243.5    246.5      3.0       1.13     0.36     0.02
KB-07-166    247.0    249.5      2.5       0.91     0.61     0.02
KB-07-167    210.5    217.0      6.5       1.15     0.40     0.03
KB-07-168    270.0    272.8      2.8       1.49     0.21     0.04
KB-07-168    285.0    289.5      4.5       1.36     0.41     0.03
KB-07-168    285.0    291.0      6.0       1.16     0.38     0.03
KB-07-180    358.0    379.5     21.5       2.95     0.82     0.07
KB-07-180    363.5    375.0     11.5       4.85     0.84     0.12
KB-07-180    364.5    370.0      5.5       7.21     0.67     0.19

Analytical Method

-----------------

Mineralized diamond drill hole intervals reported are down hole core lengths only. NQ diameter drill core samples are split in half; one half being retained in its original core box and the second half sent to an independent commercial laboratory for analysis. Samples are analyzed by ISO 17025 accredited Accurassay Laboratories in Thunder Bay, Ontario. Samples analyzed for base metals (nickel, copper, and cobalt) are digested using aqua regia with an atomic absorption finish.

The exploration program is being carried out under the direction of the Company's Vice President of Exploration, Todd Keast P. Geo., a qualified person as defined by National Instrument 43-101. The information in this release was prepared under the direction of Kim Tyler, P. Geo., President of the Company, a qualified person as defined by National Instrument 43-101.

About Canadian Arrow Mines, Ltd.

Canadian Arrow Mines, Ltd. is an established Canadian exploration and development Company committed to developing and advancing base metal deposits close to existing infrastructure through exploration, development and acquisition. Shares of Canadian Arrow Mines trade on the TSX Venture Exchange under the symbol "CRO".

If you would like to receive press releases via email please contact: sarah@chfir.com.

THIS PRESS RELEASE WAS PREPARED BY MANAGEMENT WHO TAKES FULL

RESPONSIBILITY FOR ITS CONTENTS.

THE TSX VENTURE EXCHANGE NEITHER APPROVES NOR DISAPPROVES OF THIS PRESS

RELEASE.

%SEDAR: 00008534E

Canadian Arrow Mines Ltd on 6ix

Story so far

Earlier from Canadian Arrow Mines

Later from Canadian Arrow Mines

All Canadian Arrow Mines news releases