Completion of Diamond Drilling on Colt's Penedono Concession, Portugal
Richmond, British Columbia CANADA, September 10, 2008 /FSC/ - Colt Resources Inc. (COLT - CNQ), is pleased to announce that an 8 hole diamond drilling program has been completed on the Santo Antonio vein system, which is located in the Company's Penedono Concession in Northern Portugal. A total of 702.90 metres were drilled in 8 holes, targeting Veins 11 and 13.
Preliminary assay results have been received for the first hole completed (PPE 08-03 on Vein 11) with the following intercepts:
-***-
From To Length Au WO3
metres g/t ppm
48.99 61.79 12.80 4.62 143
including
55.05 61.79 6.74 8.34 214
including
55.05 56.92 1.87 24.05 747
-****-
The tungsten results are reported in ppm (747 ppm equals 0.07%) but additional assaying is underway to arrive at a more accurate tungsten result as these preliminary numbers are derived from ICP analysis which is only a partial digestion for tungsten. It is anticipated that actual tungsten values when received will be higher.
Additional assays results are expected within the next 10 weeks.
The company has also received gold and tungsten results from the Marofa area which is adjacent to the west from the Santo Antonio vein system. The preliminary results are from a series of grab and channel samples taken from areas exhibiting greisen alteration and exposures of veins that have been opened up by shallow cuts and trenches from previous local small scale mining activity.
-***-
Marofa-Castain o Rock Samples, May - June 2008
tag # UTM East UTM North type occurrence description Au WO3 As
g/t ppm ppm
134465 632309 4541766 grab float qz w aspy & greisen 0.84 6 13633
134466 632291 4541747 grab float qz rich in aspy, in old
diggings 0.94 8 46209
134467 632334 4541790 grab float qz w aspy (& greisen),
between 2 old diggings 13.44 <5 29737
134468 632349 4541796 grab float 3-5cm qz vein w aspy 96.00 55 100056
134469 632349 4541796 grab float greisen (w aspy) 3.32 8 4011
134470 632425 4542118 grab float greisen (w aspy) 0.94 <5 2492
134471 632405 4542088 grab float greisen (w aspy) 2.84 413 8076
134472 632343 4542033 grab float qz w aspy & greisen 24.16 24 57164
134473 632405 4542088 grab float qz w aspy 13.44 673 35119
134474 632391 4542043 chip outcrop thin qz(-fsp) vein w
aspy, in wall of old
diggings 29.44 546 224674
134475 632391 4542043 grab float qz w aspy (& py), in old
diggings 14.08 656 38432
134476 632431 4542062 grab float qz w aspy 6.72 67 22375
134477 632425 4542118 grab float qz w aspy 18.72 19 45500
134478 632431 4542062 grab float greisen w aspy & qz 1.79 <5 9978
134479 632397 4542058 grab float qz w aspy 9.36 402 44174
134480 631373 4539676 grab float granite/greisen & qz w
aspy & py, in large old
diggings 25.28 23 85560
134481 631442 4541047 grab outcrop greisen veins w aspy 13.60 13 136673
134482 631647 4540875 grab outcrop qz & granite/greisen
(coarse pegmatitic) w
dissem py & aspy, in
old diggings 2.92 32 49008
134483 631488 4541205 grab float greisen w aspy, in
quarry wall 10.24 608 53003
134484 631872 4540922 grab float qz w aspy, in old
diggings 13.60 50 84495
134485 631872 4540922 grab float greisen w aspy, in old
diggings 5.64 48 21619
134486 631876 4540925 grab float qz w wolframite, in old
diggings 0.15 242 1012
134487 632111 4541012 grab outcrop greisen & thin qz veins
w aspy, in old diggings 12.00 259 57900
134488 632043 4540970 grab float qz vein w aspy, py, cpy;
in old diggings 9.16 85 54354
134489 632551 4541561 grab float qz w aspy & cpy, in old
diggings 0.86 350 7045
134490 631950 4541050 chip outcrop greisen w qz & aspy 4.56 61 15558
134491 632540 4541484 chip outcrop qz & greisen w aspy
(thin vein) 3.48 7 41640
134492 632552 4541638 chip outcrop qz w aspy, vein>20cm,
in quarry for aggregate 43.52 429 130663
134493 631900 4540986 chip outcrop qz w aspy (& wolf?), in
old diggings 10.76 6 77009
134494 631958 4541020 chip outcrop greisen w qz & aspy 10.36 486 16662
134495 631591 4540912 grab float greisen & qz w aspy 4.52 454 89189
-****-
The results above are very encouraging for the company as they indicate a strong tungsten gold potential for this area close to the Santo Antonio veins. The gold values, while taken in many cases from float samples, were all in close proximity to old vein indications from previous work by local miners. The tungsten results are reported as ppm due to the ICP analytical technique which has only a partial digestion for tungsten and further assay analysis is expected to increase the tungsten values.
ARMAMAR MEDA CONCESSION
On the Armamar Meda Concession, located to the north of the Penedono concession, the company has successfully completed negotiations with the local land owners to allow access to the Tabuaco property and initiate an exploration program of geological mapping and sampling over the indicated tungsten mineralization previously defined by others.
The Armamar Meda concession hosts several tungsten occurrences which were discovered in the middle 1970's and were partially explored in the 1980's by a joint venture of a Portuguese company SPE with a French government group BRGM.
The Tabuaco occurrence has had 6 widely spaced diamond drill holes completed on the mineralized skarn horizon and these holes indicated varying thicknesses of up to 19 metres grading approximately 1 % WO3. A very preliminary resource calculation which is not NI 43-101 compliant and which has not been confirmed by Colt, indicated 1,000,000 tonnes with an approximate grade of 0.9% WO3. This mineralization indicated in the 6 diamond drill holes appears to be open to depth and along strike.
Other tungsten occurrences in the area that were referred to in old reports are being evaluated and sampled with results expected within the next 2 months. The company is very encouraged by its preliminary investigations.
The Company's diamond drilling and exploration programs are under the supervision of J.W. Murton, P. Eng., a qualified person as defined by National Instrument 43-101. Mr. J.W. Murton is a director of Colt and is also responsible for the technical information presented in this news release.
For more information contact:
Colt Resources Inc.
Bedo H. Kalpakian, President & CEO
Tel: (604) 278-4400 ext 203
Fax: (604) 278-4430
bedo@coltresources.com
www.coltresources.com.
Statements made in this news release that relate to future plans, events or performances are forward-looking statements. Any statement in this release containing words such as "believes", "anticipates", "plans", "expects" or "intends" and other statements that are not historical facts are forward-looking, and these statements involve risks and uncertainties and are based on current expectations. Consequently, actual results could differ materially from the expectations expressed in those forward-looking statements. The CNQ has not reviewed and does not accept responsibility for the adequacy or accuracy of this news release.
Source: Colt Resources Inc. (CNQ: COLT) - http://www.coltresources.com
Maximum News Dissemination by Filing Services Canada Inc.
Ph: (403) 717-3898 Fx: (403) 717-3896 www.usetdas.com