Bearclaw Capital Corp.TSXV: BRL.H

Bearclaw Reports Results of Drilling on Axe Property

· Issued by Bearclaw Capital Corp. via CNW

VANCOUVER, Jan. 26 /CNW/ - Bearclaw Capital Corp. (TSX Venture: BRL) is pleased to report the assay results from the first phase of a drilling program undertaken by Weststar Resources Ltd. on Bearclaw's Axe property near Princeton, B.C. Weststar carried out the drilling program as part of its obligations under an option agreement with Bearclaw, by which Weststar may earn up to a 66% interest in the Axe property.

The following technical information was provided to Bearclaw by Weststar:

The results of this drilling confirm the discovery of a potentially large copper-gold mineralized zone associated with the porphyry-style mineralized resource of the previously delineated West Zone.

The drill program was completed in late fall of 2006 and consisted of five diamond drill holes aggregating 683 metres.

Significant mineralization was encountered in holes A06-02, 03, and 05 as shown in the table below. In the West Zone, hole A06-02 returned a 4.5 metre intersection grading 2.22% copper and 0.72g/t gold within a broader 45 metre intercept (126-171 metres) that averages 0.53% copper and 0.15g/t gold.

According to Chris Dyakowski, President and CEO of Weststar, "This is one of the best intercepts ever reported from the Axe property and is particularly significant given the fact it is coincident with a very strong chargeability anomaly (IP anomaly) that appears to be getting stronger at depth. Equally as intriguing is the apparent increase in copper and gold grades the deeper the zone is tested by drilling."

Hole A06-02 ended in a well-mineralized 12.5 metre zone (202.5-215 metres) which graded 0.65% copper and 0.22g/t gold, while A06-03 returned a 106.5 metre intercept (18-124.5 metres) grading 0.20% copper and 0.15g/t gold. A06-05 returned 14.5 metres (11-25.5 metres) averaging 0.36% copper and 0.29g/t gold.

From 25.5-75.0 metres, the copper content in A06-05 is weakly anomalous but the gold content improves substantially to average 1.29g/t. Included within this zone is a 7.5 metre intercept averaging 4.87g/t. The last 52 metres of this hole were not sampled initially due to lack of visible mineralization. As there were significant gold values assayed earlier in the hole, these missing samples have since been collected and submitted for assay.

Hole A06-01 was drilled to test the northern extension of the West Zone at depth and terminated at 33 metres due to bad ground. A06-02 tested the central portion at depth and was drilled to target depth of 215 metres. A06-03 tested the southern extension at depth to a target depth of 198 metres. A06-05 was a re-drill of A06-01 in the northern extension and again encountered bad ground, terminating early at 127 metres.

All holes in the West Zone were anomalous to well mineralized throughout, with significant intercepts of both copper and gold. A06-04 in the north zone was only weakly mineralized. All drill core from the holes in the West Zone were in a highly altered and sheared alkalic granodiorite.

"These results are highly significant and represent an entirely new style of mineralization on the Axe property," stated Mr. Dyakowski. "This is regarded as a new discovery, classically in an old mining camp and associated with an established resource. Most importantly, not only are the copper values grading significantly higher at depth, so are the gold values - none of which had ever been reported in earlier programs."

"Chalcopyrite is the principal copper mineral of the West Zone, contributing significantly to the overall copper content, however copper also occurs as chalcocite, bornite, native copper, cuprite and malachite," he observed.

Mr. Dyakowski confirmed that there appears to be "a zonal distribution of both metals, similar in nature to the gold/copper zoning at Mount Milligan and Fish Lake, two major porphyry deposits in central British Columbia." However, Weststar has indicated that further analytical work, including petrographic studies and drilling, will be required to provide a better understanding of this relationship.

The Axe property was developed in the early 1970's and early 1980's by Amax and Cominco. From this work, an indicated resource of 39MT (million tons) grading 0.38% copper at a cut-off of 0.25% copper is indicated in four zones, as documented in the July 14, 2006 report "Summary Report on the Axe Project", prepared by John R. Kerr, P.Eng., and filed by Weststar. The property contains an additional inferred resource of 32 MT grading 0.38%. The West Zone contains indicated resources of 9.1MT at 0.37% copper (included in the above total). Gold was not detected or analyzed for in previous programs. The resource of the West Zone is located to a depth of only 100 metres (deepest drill hole), and Weststar has stated that it anticipates that all three new holes will add significantly to this existing resource.

Weststar has indicated that follow-up exploration plans for the Axe property have not been firmly established, but it has indicated that it expects that these plans will involve a major drill program. Weststar has reported that it has sufficient funds to complete a comprehensive quality control and assay assurance program, and to input all historical and current drill data into a resource modeling computer program.

"IP results indicate significant targets in down-dip extensions of both the Adit Zone and the South Zone. The current results renew optimism that drilling these targets will result in similar discoveries," said Mr. Dyakowski.

The Axe project is located in southern BC close to the mining centres of Merritt and Princeton. The geologic environment is in the north/south trending belt of Triassic Nicola Group of volcanic rocks between the Similco Mine and the prolific Afton/Highland Valley Mine area. The property consists of 21 mining claims (119 claim units) totaling 2,900 hectares. The area has been logged, and there do not appear to be any major permitting obstacles that would restrict a large open-pit mining operation in this area.

Analytical analyses of samples from the current program were completed at Acme Analytical Laboratories Ltd. in Vancouver, BC. Quoted intercepts are based on fire assays for gold and full assays for copper. Weststar is currently completing a comprehensive quality assurance/quality control program including duplicate samples that formed part of the sampling protocol in addition to the laboratory's own quality assurance program. The field program was supervised by John R. Kerr, P. Eng., who is an independent qualified person under the definition of National Instrument 43-101.

Weststar has stated that the technical information in this news release was reviewed by Weststar's qualified persons (as defined for National Instrument 43-101), John R. Kerr, P. Eng. and Chris Dyakowski, P.Geo., the President and CEO of Weststar. William R. Gilmour, P.Geo., a director of Bearclaw and a qualified person (as defined for National Instrument 43-101), has reviewed the technical information in this news release.

The TSX Venture Exchange does not accept responsibility for the adequacy

or accuracy of this press release.

                         2006 Drill Results
                             Axe Property

                             Core
                             ----
Hole      From       To     Length   Copper          Gold      Comments
----      ----       --     ------   ------          ----      --------
Number  (metres)  (metres) (metres)    (%)          (g/t)
------  --------  -------- --------    ---          -----

A06-01    5.0       33.0     28.0   Anomalous        Nil      terminated
                                      to 0.20                at 33 m due
                                                           to stuck rods


A06-02    9.5       15.0      5.5   anomalous        Nil
         15.0       37.5     22.5        0.21       0.14
         37.5       78.0     40.5   anomalous  anomalous
         78.0       87.0      9.0        0.27       0.07
         87.0       91.5      4.5   anomalous  anomalous
         91.5      108.0     16.5        0.18       0.10
        108.0      126.0     18.0   anomalous  anomalous
        126.0      171.0     45.0        0.53       0.15
        171.0      177.0      6.0   anomalous  anomalous
        177.0      186.0      9.0        0.18  anomalous
        186.0      202.5     16.5   anomalous  anomalous
        202.5      215.0     12.5        0.65       0.22     end of hole

A06-03   18.0      124.5    106.5        0.20       0.15
        124.5      198.0     73.5   anomalous  anomalous     end of hole


A06-04   10.0      110.0    100.0   no significant            terminated
                                    intersections           at 110 m due
                                                           to stuck rods

A06-05   11.0       25.5     14.5        0.36       0.29
         25.5       75.0     49.5   anomalous       1.29
         75.0      127.0     52.0   assays incomplete      terminated at
                                                            127 m due to
                                                              bad ground

%SEDAR: 00013834E

Bearclaw Capital Corp. on 6ix

Earlier from Bearclaw Capital

Later from Bearclaw Capital

All Bearclaw Capital news releases