Period ended June 30, 2011.
ST. PETER PORT, GUERNSEY, Aug. 12, 2011 /CNW/ -
Exploration
SOMIKA
PROJECT MILESTONES ACHIEVED
- Between January and June 2011, 18,472 metres of diamond drilling was completed at the Kalana Mine using two diamond drill rigs. 1,535 metres of diamond drilling was also completed at the Kalanako prospect during the second quarter 2011. One diamond drill rig was used for this program. The 2011 work program aims to complete 46,000 metres of diamond and RC drilling with a total budget of $8 million.
- In 2010, 13,164 metres of diamond drilling and 28,347 metres of reverse circulation drilling were completed at Kalana, Kalanako and Dabaran. All assay results, including re-assays from the first campaign between February and July 2010, have been received.
- Expenditure in 2009 and 2010 totalled $6.4 million. By end 2011 IAMGOLD plans to have expended approximately $14.4 million, higher than the minimum $11 million required to be spent by August 2012 in terms of the Option Agreement. Expenditure to June 2011 totalled $4.7 million.
- Termite mound sampling on the 387 sq. km Kalana permit has been completed. During 2010 approximately 21,000 samples were collected and assay results have been received. During 2011 approximately 4,000 additional samples were collected at priority targets and assay results were received during the second quarter. Interpretation of the results confirms that significant gold anomalies exist including Djirila that has been drill tested.
- The main objective is to complete lines of drill holes spaced 50m apart across the Kalana 1 North domain and Kalana 1 South Domain to enable geological cross sections to be generated and a resource study to be completed during 2012. Three diamond drill rigs are working, and a reverse circulation drill rig has been mobilised to site in July. Preliminary geological cross sections have been generated for Kalana 1 North (one cross section) and Kalana 1 South (five cross sections).
Highlights
During 2010 and 2011 diamond drilling and RC drilling has shown the potential for bulk mining at Kalana. IAMGOLD has made significant progress in constructing a detailed and predictive geologic model on the Kalana project. The Kalana Project is described below in three domains, namely Kalana 1 North, Kalana 1 South and Kalana II. These three domains are located within the total Kalana project and can be considered as one potential mine.
Mineralised packages up to 18 metres width have been confirmed by drilling and underground development in the northern area of the Kalana Mine designated as Kalana I North. Assay results from the diamond drill program shows extensive mineralised packages extending 250 metres north from No 2 shaft to a depth of 250m below surface across approximately 150m strike.
A new mineralised package of steep, thin, closely spaced veins has been exposed by diamond drilling and underground development between 100m and 250m elevations in this area. Assay results show that this mineralised package has several zones of elevated gold grades, generally associated with flat dipping quartz vein structures that crosscut the package.
North of the existing underground workings, vertical and flat dipping quartz veins have been intersected between surface and 100m elevation that may provide early access to bulk mineable ore within the saprolite zone. The results of diamond drilling and RC drilling confirm the possibility of these vein packages being a source of gold mineralisation for an open pit in Kalana 1 North domain.
The diamond drill and RC assay results continue to demonstrate the potential for an open pit in the Kalana 1 South domain, running east-west over 300m and with a strike of at least 200m to a depth of 120m. During the second half of 2011 infill reverse circulation drilling will increase the density of data to enable a mineral resource to be estimated in 2012. There is potential to extend the mineralisation to the north by 150m towards the existing mine infrastructure at No 1 Shaft. It is planned to commence RC drilling in between the existing infrastructure during the fourth quarter.
Initial results from diamond and RC drill holes at Kalana II, east of the existing mine, are providing a better understanding of the potential mineralisation than previously interpreted. Assay results from the 2010 diamond and RC drilling at Kalana II have been received and show the excellent potential for mineralised packages that may lead to a major increase in the existing Mineral Resources at Kalana II. . Diamond drilling and RC drilling during the second half of 2011 will increase the density of data and enable a geological cross section to be interpreted.
Assay results from the 2010 RC drill holes at Kalanako, a satellite prospect located 3 kilometres north east of Kalana, are very encouraging. The results indicate that at least two mineralised zones exist, striking north-west as indicated by the geochemical anomaly, artisanal workings and geophysical structures. A diamond drill program has commenced in quarter 2, 2011 to provide geological information to enable a preliminary model to be developed.
Results to June 30, 2011
Avnel issued press releases on January 31, 2011, February 22, 2011 and
May 26, 2011and this update should be referenced to those documents.
KALANA I NORTH
Assay results from twenty six diamond drill holes reported show that a
mineralised zone running 400m north of No 2 Shaft has significant
mineralised packages suitable for bulk mining.
Kalana 1 North has been drilled systematically over six north-south sections and two east-west sections. Forty seven diamond drill holes have intersected mineralised zones of varying width and grade. Thirty nine holes were drilled at a sixty degree angle from south to north at fifty metres between drill hole collars to intersect the predominantly north-south plunging vein structures. Eight drill holes were drilled at a sixty degree angle from east to west at approximately 100m between drill hole collars.
Assay results have been received for twenty six holes with results for 21 diamond drill holes outstanding.
KALANA I SOUTH
The diamond drill and RC assay results continue to demonstrate the
potential for an open pit in the Kalana 1 South domain, running
east-west over 300m and with a strike of at least 200m to a depth of
120m.
During the second half of 2011 infill RC drilling will increase the
density of data to enable a mineral resource to be estimated in 2012.
There is potential to extend the mineralisation to the north by 150m
towards the existing mine infrastructure at No 1 Shaft. It is planned
to commence RC drilling in between the existing infrastructure during
the fourth quarter
Kalana 1 South has been drilled systematically over five east-west sections and four north-south sections. Forty one diamond drill holes have intersected mineralised zones of varying width and grade. Thirty three holes were drilled at a sixty degree angle from east to west at fifty metres between drill hole collars to intersect the predominantly west-east plunging vein structures. Eight diamond drill holes were drilled at sixty degree angle from south to north at approximately 100m between drill hole collars.
Assay results have been received for thirty eight diamond drill holes with results for 3 diamond drill holes outstanding.
Eighteen RC drill holes have been drilled over two east-west sections
and assay results have been received for eighteen holes. The RC drill
holes are drilled at between fifty five and sixty degrees angle from
east to west to a depth of 100m along the drill hole. Drill collars are
approximately 50m between holes.
The surface area covered by the drill sections is 540m (east-west) by
250m (north-south).
Geological modelling has progressed well with 5 cross sections partially complete.
KALANA II
The results confirm the existence of an extensive mineralised zone down
to 100m below surface over a surface area of 300m by 400m. Additional
drilling planned in 2011 will enable the mineralisation to be modelled.
Kalana II has been drilled systematically over five east-west sections and five north-south sections. Nine diamond drill holes have intersected mineralised zones of varying width and grade. Five holes were drilled at a sixty degree angle from east to west at 100 metres between drill hole collars to intersect the predominantly west-east plunging vein structures. Four diamond drill holes were drilled at a sixty degree angle from south to north at approximately 100m between drill hole collars.
Assay results have been received for all nine diamond drill holes.
Thirty one RC drill holes have been drilled over five east-west sections and assay results have been received for all thirty one drill holes. The RC drill holes are drilled at between fifty five and sixty degrees angle from east to west to a depth of 100m along the drill hole. Drill collars are approximately 100m between holes. Twenty eight RC drill holes have been drilled over four north-south sections and assay results have been received for all twenty eight drill holes. The RC drill holes are drilled at between fifty five and sixty degrees angle from south to north to a depth of 100m along the drill hole. Drill collars are approximately 100m between holes.
The surface area covered by the drill sections is 300m (east-west) by 400m (north-south).
Geological interpretation and modelling is in progress. Preliminary interpretation indicates two mineralised domains (named Savanna and Superette) dipping from surface to the east. During the second half of 2011 several diamond drill holes and RC drill holes are planned to provide additional geological and assay information. Based on an increased density of data geological modelling will proceed.
All assay results have been reported in quarter 1 2011.
KALANAKO
During 2010 138 RC drill holes were completed at Kalanako. A total of
14,460m were drilled. Holes were drilled to an average of 105m hole
length at an inclination of 55 degrees. Hole collars were spaced 50m
apart. Assay results have been received for 138 holes.
Two mineralised trends, one over 500m and the other over 250m, have been
detected from the drill assay results. The potential to explore below
the 100m depth may identify the source of these strong mineralised
structures.
During the second quarter four diamond drill holes were completed at Kalanako and one diamond drill hole was in progress. A total of 1,535 metres were completed in DD001, DD002, DD003 and DD004.
The diamond drill holes will provide geological information to assist the interpretation of the mineralised zones identified by the 2010 RC drill hole program. No diamond drill assay results have been received.
The depth of saprolite and saprock is between 150m and 200m, much deeper than that observed at Kalana. In fresh rock there is evidence of shearing and tight folding that is also not observed at Kalana.
Resource Study
The program to date has made significant progress in constructing a
detailed and predictive geological model. The drilling to be completed
in 2011 is designed to provide information for IAMGOLD to generate a
resource estimate. Historically diamond drilling at the Kalana Mine has
underestimated the grades of the mineralised packages actually mined.
This under evaluation is common to high grade quartz vein mines where
the nugget effect is very significant. Recent underground development
by Avnel of Vein 20 has again shown that drill hole results
underestimate gold grades mined. As part of the resource study it is
planned to study the nugget effect at the Kalana Mine using historic
data and assess what additional methodology can be applied to the
sample and assaying protocols.
Avnel continues to operate the underground mine exploiting exposed
quartz veins by narrow stope mining and gravity gold recovery. This
continues to produce data that is helpful to evaluate the nugget
effect. In addition Avnel is mining exploration raises (including
twinning diamond drill holes) and drifts (a total of 600 metres for
2011) for and at IAMGOLD's cost.
Avnel expects to release assay results from the drilling completed
between January and April 2011 as data are received and interpretation
of results allows. The results were used to generate preliminary
geological cross sections. Results of drilling between May and July
2011 will be released in September 2011.
QAQC
Sample protocol entailed the splitting of the core by diamond core saw
by IAMGOLD staff at the Kalana mine site. Half of the sample preserved
at the Kalana mine site and the other half separated by the metre and
dispatched to the SGS analytical facilities in Bamako, a well
recognized assay lab in West Africa. Each meter sample was dried,
crushed, pulverized to 85% passing 75 micron, and then split using a
cone splitter. Approximately 200 grams of the pulverised sample was
placed in sealed packets and sent to the SGS assay laboratory in Kayes,
Mali. Samples were analyzed for gold using a 50g fire assay. Rejects
are returned to the Kalana Mine site and stored by IAMGOLD staff.
As part of the QAQC program, control samples are added. These control
samples include standards, blanks and duplicates.
Fougadian Exploration Permit
On December 6, 2010 the Company announced that it had entered into a
joint venture arrangements agreement (the "Joint Venture Arrangements
Agreement") whereby IAMGOLD has the option to acquire up to an initial
51% interest in Avnel's 90% interest in the Fougadian Exploration
Permit. The Fougadian Permit held by Avnel previously comprised 150 sq.
km. to the south of and abutting the Kalana Exploitation Permit. Avnel
relinquished the southern half of its ground in accordance with the
Malian Mining Code and was granted a new exploration licence on the
northern half on March 23, 2010. IAMGOLD has applied for and received
an exploration permit in respect of the southern 75 sq. km. The
combined permits are referred to as the "Fougadian Exploration Permit".
Under the terms of the Joint Venture Arrangements Agreement, IAMGOLD
will fully fund and satisfy the expenditure requirements of the
Fougadian Exploration Permit and, upon establishing a qualifying
mineral resource of not less than 250,000 oz of gold, may earn a 51%
interest (of Avnel's 90% interest) in the permit. Upon delivery of a
pre-feasibility study, IAMGOLD will be entitled to increase its
interest to 65%. After delivery of a feasibility study, IAMGOLD will
undertake to procure or provide project financing to develop a mining
operation.
During the first half 2011 approximately 12,300 termite mound samples were collected and submitted for sample preparation at the Kalana SGS sample preparation laboratory. The prepared samples were submitted to SGS fire assay laboratory in Kayes. 7,000 assay results have been received and validated. The gold values obtained on the "Avnel 1" anomaly are the highest seen on both Fougadian and SOMIKA permits. IAMGOLD believes the anomaly is linked with a rooted geological structure. Avnel completed limited drilling over the Avnel 1 anomaly in 2008 as reported above.
The establishment of an exploration camp commenced during the quarter and will be operational in the fourth quarter after the rainy season. Expenditure totaled $483,000 during 2011.
Results of Operations
Revenue decreased slightly to $3,918,000 in the second quarter of 2011
from $4,001,000 in the second quarter of 2010. This was as a result of
a decrease in gold ounces sold from 3,338 ounces in the second quarter
of 2010 to 2,605 ounces in the second quarter of 2011 offset by the
increase in the realised average sales price of gold from $1,196 per
ounce in 2010 to $1,499 per ounce in 2011.
Avnel recorded a net loss of $193,000 ($0.000 loss per share) for the quarter ended June 30, 2011 compared to a net loss of $1,718,000 ($0.007 loss per share) in the comparative period in 2010. The main contributing factor to the reduced loss in the period was a reduced exchange loss of $285,000 compared to an exchange loss of $2,106,000 in the comparative period in 2010.
As compared to the balance sheet as at December 31, 2010, Avnel's cash and cash equivalents as at June 30, 2011 increased by $7,731,000 from $2,106,000 to $9,837,000. On March 31, 2011 a private placement closed, the net proceeds of which $9,621,000 were received in April 2011.
There was a working capital surplus of $12,516,000 as at June 30, 2011 compared to working capital deficit of $14,262,000 as at June 30, 2010. The increase mainly resulted from the debt equitisation and private placement in August 2010 and the March 31, 2011 private placement.
Total assets increased from $23,438,000 as at December 31, 2010 to $31,990,000 at June 30, 2011 due to the private placement on March 31, 2011.
Stockholders' equity also increased to $32,996,000 as at June 30, 2011 from $24,580,000 at December 31, 2010. This was due to the private placement in March 31, 2011. The retained deficit increased by $1,191,000 as a result of the net loss made in the first half of 2011.
Mining Operations
The following table shows the production from the Kalana Gold Mine:
| Three months ended June 30 | Six months ended June 30 | |||||||
| 2011 | 2010 | 2011 | 2010 | |||||
| Tonnes milled: | ||||||||
| Underground ore | 12,922 | 12,280 | 24,048 | 25,853 | ||||
| Gold grade - grams per tonne (g/t): | ||||||||
| Underground ore | 8.29 | 8.06 | 7.28 | 8.24 | ||||
| Recovery rate - % | 86.0 | 86.7 | 84.6 | 83.1 | ||||
| Gold production - ounces | 2,960 | 2,760 | 4,913 | 5,920 | ||||
| Cost per tonne milled | $246 | $225 | $257 | $227 | ||||
| Operating cost per ounce of gold sold | $1,009 | $742 | $1,254 | $947 | ||||
| Operating cost per ounce of gold produced | $1,075 | $1,000 | $1,260 | $989 | ||||
Tonnes milled in the second quarter of 2011 were 5% higher than achieved in the second quarter of 2010. Gold production at 2,960 ounces in the second quarter of 2011 was 7% higher than the second quarter of 2010 resulting from the higher tonnes milled together with the higher head grade which increased 3% from 8.06g/t to 8.29g/t. Gold grade of 8.28g/t was higher than the planned grade of 6.37g/t, mainly due to higher grades from Vein 18 and Vein 20 stopes.
Gold recovery in the second quarter of 2011 decreased slightly to 86.0% from 86.7%.
Mine development totalled 326 metres in quarter 2 2011 compared to 232 metres in 2010 and 227 metres ahead of the mine plan. Ore development increased to 195 metres in 2011 from 99 metres in 2010 as new mining areas were opened below 180m level. Exploration development advanced 112 metres as raises were mined to expose the mineralised package above Vein 17. The raises are adjacent to diamond drill holes recently completed by IAMGOLD.
Development results have been positive resulting in a forecast increase in potential mining areas as discussed in the outlook section.
Operating cost of sales for the second quarter of 2011 increased 8% to $3,843,000 compared with $3,571,000 in the second quarter of 2010 due to higher maintenance and labour costs, and a 5% weakening of the US dollar against the CFA. Cash operating cost of $246 per tonne milled in the second quarter of 2011 increased by 9% from the cost in the second quarter of 2010 of $225 per tonne. Cash operating cost per ounce produced of $1,075 per ounce in the second quarter of 2011 increased from $1,000 per ounce in the second quarter of 2010 due to lower gold production.
Liquidity and going concern
On March 31, 2011 the Company completed a private placement (the "2011
Private Placement") of 25,000,000 units of Avnel (the "Units") at a
price of Cdn. $0.40 per Unit (the "Issue Price"). Each Unit consisted
of one ordinary share of Avnel and one-half of one ordinary share
purchase warrant (each whole warrant a "Warrant"). Each Warrant
entitled the holder to purchase one ordinary share of Avnel at a price
of C$0.70, at any time for a period of 18 months from the date of issue
of the Warrants. Dundee Securities Ltd. was the lead agent and the
gross proceeds of the Private Placement were C$10,000,000. Avnel
intends to use these proceeds for general corporate purposes. The
Company is debt free and has sufficient funds to meet its liabilities
for the next 12 months.
The Company's cash flow is dependent on the volume of production, gold prices, operating costs, interest rates on borrowings and investments and discretionary expenditure levels including exploration, resource development and general and administrative costs as well as obtaining new sources of finance. With the world economy moving slowly out of recession, sources of finance are still difficult to obtain and are expensive.
The Company is currently in the middle of a significant exploration programme being performed by IAMGOLD under the terms of the August 2009 Option Agreement. The Company intends to sustain the current underground operation as long as economically feasible, without spending significant capital expenditure, until such time as the results of this exploration are completed and assessed to enable the Company to better evaluate future development options for the mine. Until this work is completed and a suitable development plan is identified, output from the mine will continue to be constrained.
The Annual Financial Statements and Annual Information Form are available on Sedar (www.sedar.com) and the Avnel Gold website (www.avnelgold.com).
ABOUT THE COMPANY
Avnel is a producing gold mining company operating the Kalana Mine in
south-west Mali and is engaged in the exploration of the 30-year Kalana
Exploitation Permit encompassing 387.4 sq km around and to the south of
the Kalana Mine.
Avnel's principal asset is an 80% interest in Société d'Exploitation des
Mines d'Or de Kalana ("SOMIKA") which is the holder of the Kalana
Exploitation Permit. The Kalana Project is situate in south west
Mali. The 387.4 sq km exploitation permit has a NI-43-101 compliant
resource of 1,020,000 oz (at an average grade of 10.4 g/t) in the
measured and indicated category, and 249,000 oz (at an average grade of
3.4 g/t) in the inferred category. Avnel also holds the Fougadian
Exploration Permit covering an area of 75 sq. km. to the south of the
main Kalana Exploitation Permit area and abutting it. Avnel and
IAMGOLD Corporation have entered into a joint venture arrangements
agreement whereby IAMGOLD has the option to acquire up to an initial
51% interest in Avnel's interest in the Fougadian Exploration Permit
and in an additional 75 sq. kms to the south of Avnel's Fougadian
Exploration Permit area for which IAMGOLD has applied for an
exploration permit.
Technical Information and Qualified Person/Quality Control Notes
Information in this release arising subsequent to the date of the 2005 Snowden Technical Report regarding the Kalana Gold Mine and exploration activity is provided by Avnel management under the supervision of Roy Meade (a director of the Company) who is a non-independent "Qualified Person" as such term is defined in National Instrument 43-101. Portions of the information are based on assumptions, qualifications and procedures which are not fully described herein.
Forward-Looking Information
This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts are forward-looking statements. Although Avnel believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward looking statements include market prices, continued availability of capital and financing and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and actual results or developments may differ materially from those projected in the forward-looking statements. Avnel does not assume any obligation to update or revise its forward-looking statements, whether as a result of new information, future events or otherwise.