Steve Cantor
Senior Director of Investor Relations
Replay available
Vishay Precision Group (NYSE:VPG) Q2 2020 earnings call, held 2020-08-04. Watch the replay and read the transcript on 6ix.

On 6ix: 6ix.com/event/vishay-precision-group-inc-vpg-q2-2020-earnings-call
Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.
0:00 Good day and welcome to the VPG 2020 Q2 results conference call and webcast. All participants will be in a listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. After today's presentation, there will be an opportunity to ask a question. To ask a question, you may press star, then one on your touchtone phone. To withdraw your question, please press star, then two. Please note, this event is being recorded. I would now like to turn the conference over to Steve Cantor, Senior Director of Investor Relations. Please go ahead.
0:39 Thank you, Operator, and good morning, everyone. Welcome to VPG's 2020 Second Quarter Earnings Conference Call. Our Q2 press release and accompanying slides have been posted on our website, vpgsensors.com. An audio recording of today's call will be available on the Internet for a limited time and can also be accessed on our website. Today's remarks are governed by the safe harbor provisions of the 1995 Private Securities Litigation Reform Act. Our actual results may vary from forward-looking statements. For a discussion of the risks associated with BPG's operations, we encourage you to refer to our SEC filings, especially the Form 10-K for the year ended December 31, 2019, and our other recent SEC filings. On the call today are Ziv Shoshani, CEO and President, and Bill Clancy, CFO. I'll now turn the call to Ziv for some prepared remarks. Please refer to slide three of the quarterly presentation.
1:50 Thank you, Steve. I will begin with some commentary on VPG's consolidated financial results and sales trends for Q2 and an update on the impact of the COVID-19 pandemic on our business. Bill will provide financial details on our third quarter outlook. Moving to slide three, despite the challenges presented by the COVID-19 pandemic on our businesses, We executed well in the second quarter. We achieved sales in the mid-point of guidance with strong results in our technology product segment, driven by advances in precision quality systems.
2:41 We achieved a solid margin in EPS on a lower revenue compared to Q1, reflecting positive product commitments, cost control, and manufacturing efficiency. We generated positive adjusted free cash flow even as we continued our investment in our new advanced sensor manufacturing facility. And we adjusted our operations effectively to meet local COVID-related restrictions and continue to take precautions and measures to protect our employees during this epidemic. Moving to slide four, sales in the second quarter were 59.1 million, reflecting the impact of COVID-related closure and restrictions around the world.
3:38 Although the greatest impact was on our force sensors business, which I will discuss in more detail shortly, the majority of our operations were able to adjust and to operate effectively. In terms of sales, by N markets in Q2 compared to Q1. Sales to avionic, military, and space market continued to be driven by defense spending, and sales to the semiconductor test portion of the test and measurement market were strong. In addition, we had higher shipments of kelp products to the steel industry, and sales increases in some of our other markets such as consumer and medical equipment.
4:26 This contrasted with lower sales in industrial weighing, transportation, and general industrial markets. Yet, we saw clear signs of softer orders across several end markets, which contributed to an overall book-to-bill of 0.95. Moving to slide five, turning to our Turning to our trends by segment, for foil technology products, second quarter sales of 31.8 million grew 4.3% sequentially, driven by strength in the precision foil resistors for defense-related customers and advanced sensors in the consumer and medical markets.
5:15 We were pleased with the performance of advanced sensors which grew in sales by 36% from Q1 of 2020. This offset by a weaker sales of other FTP products used in industrial applications. Gross margin for the FTP adjusted for COVID impacts was 41.7%, which improved from 36.7% in the first quarter due to higher volume and improved manufacturing efficiency. Book to bill for FTP was 0.85 in the second quarter, reflecting a softening in orders in the test and measurement and general industrial markets, while advanced sensors recorded another consecutive quarter of significant orders.
6:10 The demand for advanced sensors products have required us to operate our current manufacturing at a near maximum capacity to meet customer commitments. This validates the traction we were seeing in the market for these products, and it underscores the need for our new FTP manufacturing site to support future growth. Given the production demand on the existing manufacturing site, as well as vendor delays in installing and qualifying new equipment due to the pandemic, we expect to be fully operational in the new facility in 2021.
6:55 For the four sensor segment, it was a challenging quarter. Second quarter sales of 8.9 million declined 39.3% from the first quarter of 2020 due to COVID restrictions mandated across much of India, which caused our facility there to operate as partial capacity during the second quarter. This resulted in a revenue shortfall for four sensors in Q2 of about 6 million from pre-COVID run rate. The lower revenue impacted in the second quarter, operating profit by approximately 2.5 million.
7:42 Nonetheless, as of July 1st, we received approval from the local Indian authority to operate without limitations. This has allowed us to accelerate efforts to ramp up production to pre-COVID levels, which we expect to achieve in Q4, bearing any unforeseen issues. Given the timing of ramping the India facility for the third quarter, We expect four sensors' revenues to be adversely impacted by approximately $3 million to $4 million from pre-COVID-19. We expect to be impacted by approximately $1 million to $1.5 million due to lower revenue.
8:32 Reflecting the abnormally low sales in Q2 and softer orders, Book-to-bill for four sensors was 1.58. Demand trends were mixed as strength demand for loaders used in medical applications was offset by global demand for industrial applications. and Ziv Shoshani. and shutdowns hindered some customers from receiving our systems, which contributed to lower sales.
9:48 In addition, pandemic-related shutdowns impacted our onboard weighing sales to transportation customers both in Europe and in North America in the second quarter. Software orders for WCS in the second quarter resulted in a book-to-bill of 0.82. Gross margin in the second quarter for WCS was 47.3%, adjusted for COVID impact, and declined modestly from 48.0% in the first quarter due to lower volume partially offset by our cost control measures.
10:35 Regarding our TrackWay one-way initiatives, the European Union finalized its pending overload protection regulations, with most EU member states opting for the weigh-in-motion platform rather than an on-board weighing solution. While this means the OEM opportunity for us will be less than we expected, the traction we had achieved pre-COVID in the aftermarket in the UK and France gives us confidence in opportunities for our solution. As an aftermarket sale, our truck-way, van-way solution is complementary to the way-in-motion platform since it helps fleet operators to optimize the safety and efficiency of their fleet and avoid potential regulatory fines.
11:34 Moving to slide six. Given the uncertainty regarding the arc of the pandemic in the US and around the world, we are continuing with our measures to protect our employees, including workplace distancing and enabling employees to work remotely if their jobs permitted. In terms of the impact of the P&L, In addition to the revenue impact I described earlier due to COVID-19, we incurred a net expense of approximately $443,000 related to employment costs and workplace adjustments.
12:22 Overall, beyond the short-term measures to control our costs, we are continuing our long-term strategic initiatives across the businesses. We believe that these steps will serve us well to not only contend with the COVID impact, but also to maximize our profitability and achieve the margin leverage in our target model when our markets fully recover. At the time, we are continuing to invest in the company's future The new FTP facility is an example of our strategic investment and represents a meaningful portion of our expected capital spending of approximately $30 million for 2020. We are also continuing to look for opportunities to build additional shareholders' value to attractive M&A.
13:23 Before Bill provides more details on the second quarter financials, I would like to thank the VPG employees around the world for their dedication and customer focus during these challenging times. I will now turn it over to Bill Clancy for an additional financial details. Bill?
13:47 Thank you, Ziv. Referring to page 7 of the slide deck, in the second quarter of 2020, we achieved revenues of $59.1 million, operating income of 4.0 million, or 6.7% of revenues, and net earnings per diluted share of 13 cents. On an adjusted basis, excluding 41,000 of acquisition and purchase accounting adjustments related to the DSI acquisition in November of 2019,499,000 of restructuring costs, and 443,000 of COVID-19 impacts, our adjusted gross profit was 23.7 million, were 40.1% of sales, operating income was $5.0 million, or 8.4% of sales, and adjusted net earnings for diluted share was $0.19.
14:40 Our second quarter of 2020 revenues declined 12.6% compared to $67.7 million in the first quarter, and we're down 16.5% as compared to $70.9 million in the second quarter a year ago. Barney Exchange for the second quarter of 2020 negatively affected revenues by $700,000 compared to a year ago and $500,000 as compared to the first quarter of 2020. Our gross margin in the second quarter was 39.1%. Our gross margin on an adjusted basis was 40.1%, which improved from 37.8% in the first quarter of 2020. Our operating margin was 6.7% for the second quarter of 2020.
15:30 Excluding the above-mentioned purchase accounting adjustments, restructuring charges, and COVID-19 impacts, our second quarter adjusted operating margin was 8.4%, which increased from the 7.8% we recorded in the first quarter of 2020. Selling general and administrative expenses for the second quarter of 2020 were $18.6 million or 31.5% of revenues. This compared to $19.9 million or 28.1% for the second quarter last year and $20.3 million or 30% in the first quarter. The decrease in SG&A expense of $1.3 million as compared to the prior year period related to less travel costs of $1.0 million Reduction of bonus reserves of $500,000 and other fees of $600,000 partially offset by the inclusion of a full quarter of SG&A expense for DSI.
16:34 The sequential decrease in SG&A of $1.7 million relates to reduction in travel of $600,000, bonus reserves of $300,000, bed debt expense of $300,000, exchange rate impact of $300,000, and other fees of $200,000. The adjusted net earnings for the second quarter of 2020 were $2.6 million, or 19 cents per diluted share, compared to $4 million, or 29 cents per diluted share, in the first quarter of 2020. Foreign currency exchange rates for the second quarter of 2020 decreased net income by $1.2 million, or 9 cents per diluted share, relative to the prior year period.
17:23 We generated adjusted free cash flow of $3.1 million for the second quarter of 2020 as compared to $6.7 million for the second quarter of 2019. We defined adjusted free cash flow as cash from operating activities, less capital expenditures, plus sale of fixed assets. The GAAP tax rate in the second quarter was 28.1%. We are assuming an operational tax rate in the range of 27% to 29% for 2020 planning purposes. Moving to slide eight, we ended the second quarter with $87.2 million of cash and cash equivalents and total long-term debt of $40.7 million.
18:09 We believe that we have a strong balance sheet and ample liquidity to support our business requirements and to fund additional M&A opportunities. Regarding the outlook, given our order rate and the ongoing uncertainties and economic impacts of the global pandemic, we expect net revenues to grow sequentially and be in the range of $59 million to $65 million for the third fiscal quarter of 2020 at constant second fiscal quarter 2020 exchange rates. In summary, we executed well despite the challenges of COVID-19. We delivered solid Q2 margin performance on lower revenue.
18:55 And we continue to move forward with our growth initiatives and investments and to be ready to maximize our performance as conditions return to normal. With that, let's open the lines for questions. Thank you. Thank you. We will now begin the question and answer session. To ask a question, you may press star, then 1 on your touchtone phone. If you are using a speakerphone, please pick up your handset before pressing the keys. If at any time your question has been addressed and you would like to withdraw your question, please press star, then two. First question today will come from Sarkis Shobeshung with BRally FBR. Please go ahead.
19:41 Hey, good morning, and thanks for taking my question here. So sequentially lower top line, you guys generated much better than anticipated gross margin and clearly the profit flow through was nice. Can you maybe help us understand the drivers relative to the target operating model you guys had described in a recent investor presentation?
20:04 Yes, Sarkis, this is an excellent question. The target model that we have provided was based on a and Ziv Shoshani. which would be considered deviation from the model would be considered as we have $800,000 of favorable product mix.
20:51 Then we are speaking about close to $1 million of manufacturing efficiencies. And then we have another $500,000 of cost control measures as travel restrictions, utilities, repairs and maintenance, and so on and so forth. Those would be the main items that we did not account in the model in respect to this quarter.
21:22 That's helpful. Thanks for that. And then just kind of looking at the segment book to bill ratios, if you can maybe help us understand how the orders have been progressing in each of the three segments in maybe July and so far in August. So is the activity in the order book improving relative to What we saw exiting 2Q?
21:43 Let me maybe start by saying about the second quarter. If you see the book to bill, well, except for sensor, naturally given the limited capacity and the restrictions in India, FTP as well as WCS are below one. The dynamics for the orders in the second quarter was mixed. We are seeing weaker than normal demand. in our traditional industrial markets, such as general industrial, industrial wing, transportation, and steel, mainly for WCS, as well as low down in oil and gas, and general industrial for FTP, however, sustained strength in AMS, medical, and consumer.
22:33 It's important to state that the drop in in the FTP order intake really represents two effects. One effect is the semiannual orders that has been placed in Q1 and has not been placed in the second quarter, which is around 50% of the gap. And the other 50% really represents the COVID effect. All in all, we do feel that we We did hit the bottom in a way, and we are more optimistic regarding the second half. Nevertheless, we don't provide guidance. But so far, I see that the order intake is meeting our expectation in respect to the Q3 guidance that we have provided.
23:33 Yeah, that's super helpful. So that's exactly what I wanted to understand was looking at the book-to-bill ratios for the segments in relation to the guidance. And it looks like you guys are anticipating a better sequential top line. And we can maybe play with the model to understand what happens with the operating profits as that happens. And kind of moving to the SG&A expenses for the quarter, $18.6 million. You know, maybe remind us how much of that was a variable, maybe cost action, you know, just trying to get a sense for what the SG&A run rate looks like going forward.
24:11 That's our case. It's a very good question. The $18.6 million, I believe, you know, going forward is a good number. I mean, obviously, we went through and analyzed, like Ziv mentioned, less travel. We had some bonus reserve adjustments. But we... continue to believe that that 18.6 to 18.8 would be a good number to use going forward.
24:39 Thank you. One more from me and I'll hop back in the queue. So you mentioned, Ziv, for the capital projects, kind of ongoing You know, especially for FTP, it's good news. And just wanted to understand how we're tracking against that $30 million budget, you know, maybe what the cadence looks like for the balance of spending and the time to completion.
24:59 Sure, sure. As you can recall, Sarkis, initially it was sometimes during the Q4 earnings of last year. We have indicated that our projected budget for this year would be around low $30 million level. Given the COVID situation, we did indicate in the last quarter in Q1 earnings that we are going to cut back our capital spending by around 30% to the low 20 level. What has changed since then is, as I indicated during the call, we are running at close to, if not at 100% capacity for advanced sensors. And at this point in time, since we wanted to build the buffer stock for transitioning advanced sensor from the legacy manufacturing facility to the new facility, running at 100% capacity will not allow us, on one hand, to transition the manufacturing because we cannot build any buffer stock. In addition to that, given the demand, we may foresee even further expansion from a capacity standpoint. Therefore, the gap was an additional spending
26:29 for advanced sensor equipment capacity which will be installed in the new facility which would allow us, on one hand, to increase revenues as demand goes up, and secondly, to allow us to move from the current location to the new location. So the gap is really further equipment for advanced sensors. This is how we get back to the $30 million.
26:56 Thank you. That's super helpful. I'll go back in the queue. and the next question will come from John Franzen with Sidoti and Company. Please go ahead.
27:10 Good morning, Ziv and Bill. Ziv, I wonder if you could talk about the India restart. How long do you think it will take to get there and how easy is it to bring the employees back as India is still having a second wave, a third wave at this point?
27:30 Okay, that's a great question, John. So if you can recall, in the last earning calls, we did indicate that India imposed a shutdown. Well, in fact, it was for most of the countries, but also where we are located, this was considered as a red zone in the country. So, in fact, we have been a few weeks under a complete shutdown. while later we have received the permission to operate just for product delivering for medical application. And I would say that during all the quarter we were operating partially.
28:17 During these times we did try to reach out to many people as we can and even to accommodate. The people that are not allowed to go back to their homes due to the red zone situation. And given July lifting the restrictions, we are now currently running at around 80 to 85 percent capacity. So the fact is that we will see an improvement in revenues in the third quarter, but please bear in mind that given The ramp-up time and the logistics time, because there is a significant amount of goods that goes deeper from India to our distribution centers in Europe and to the United States, we would see the full recovery in Q4. But currently we are running at around 85%.
29:23 This is correct. There was a certain turnover, but I think that the team in India and the divisional team did a great job, and we were able to hire people, and we are ramping up fairly quickly.
29:39 Okay, so we should allow for some inefficiencies, not only on the production, but on the labor force as you get into the fourth quarter, right?
29:49 Yes, but I would consider that as... At this point in time, it's a second-order effect because they really manage the situation in a professional manner. We see very, very insignificant inefficiencies, which means they are running very good.
30:13 And the steel market was strong, despite the overall general industrial economy being weak. Could you just talk to that and what drove that?
30:23 So when we, please bear in mind that when we spoke about steel, we were saying about revenues, not necessarily book to build. The book to build for steel in the last two quarters was quite modest. For example, in the second quarter, the book to build for steel was 0.64, which means we have seen in the last two quarters an order intake which is much lower than our revenue run rate. So we have been delivering mainly from backlog. We do feel that steel is also one of the end markets that is affected from a border intake and from a business climate. It is affected by the COVID.
31:13 So you're shipping from backlog and it's a high margin, very high margin business for you. When does that backlog kind of run out and you hit equilibrium with the bookings and the shippings?
31:27 I would expect that we will see the bigger effects coming into 2021. Unless we will see much higher order intake in the coming months.
31:48 Got it, got it. And you mentioned something in answering one of the previous questions about semi-annual orders that have not been renewed or issued. Could you just talk a little bit about that? I mean, do you fully expect them to come? Is it a customer confidence issue? You know, just elaborate a little bit on that comment.
32:13 Yeah, sure, sure. This is a pathway in. Okay, for some of our products, we are working with distributors and with, you know, contact manufacturers. And the practices that they do play based on their contact with the OEM allow semi-annual orders. So they did play semi-annual orders in Q1, but we would expect to see the... The orders coming into the third quarter again covering for the rest of the year. For example, one of those end markets is test and measurement for precision resistors.
33:03 Got it, got it. And I guess one last question and just clarify on whether it sounds like you're going to build inventory in the advanced sensors business and then Do the transition. Did I understand that properly? And what's your expected timeline on that?
33:20 So, John, let me clarify. Originally, the plan was to build a buffer stock in order to allow us to transition the equipment from the current premises to the new facility. Due to the fact that we are running a Thank you very much. I'll get back into queue. And the next question will come from Patrick Ho with Spiegel. Please go ahead.
34:12 Thank you very much, and nice work on the execution. Ziv, maybe first off, in terms of the advanced sensors, you just mentioned about building some buffer inventory. You saw significant orders in the first quarter. Can you give a little bit of color what's driving the demand for advanced sensors?
34:31 Yes. Patrick, for advanced sensors, as I said, we have two end markets which are fairly strong. One is medical, and the other one is consumer. They are the driving force behind advanced sensors or a strong order intake for the first quarter, but I have to say also for the second quarter.
34:54 Great. And maybe as a follow-up to that question on the consumer end, obviously on the technology side of things, there are some mixed data points clearly, especially as it relates to consumer electronics. Can you just give a little more color of where on the consumer side of things you're seeing the strength on the advanced sensors market?
35:18 Well, Patrick, unfortunately, and we have discussed that in the past, we have very strict NDAs, and we are not allowed to divulge any information regarding those specific applications, especially on the consumer electronics. On the other consumer applications, we have some bicycle-related, high-end bicycle-related applications, which are also doing much better. We see a much more favorable environment. But regarding the consumer electronics, unfortunately, we will not be able to provide more color regarding the applications.
36:06 Fair enough. And final question from me. You talked about building, quote, buffer inventory as you transition to the advanced sensors, and that makes complete sense. But maybe for Bill, across your entire product portfolio, given the disruptions that are still out there, you know, both in terms of your manufacturing supply chain and even at customer sites, how are you evaluating, quote, your internal inventory building across all your products, to ensure that you'll be able to meet your different customers' demands over the next couple of quarters.
36:51 Ziddi, do you want to handle that one?
36:55 Absolutely. Patrick, we have identified all the key materials that we would require in order to assure our supply chain You may have seen that we have a certain increase in inventory quarter over quarter, second quarter in respect to Q1. We have identified the key material which we believe could be under shortage in all our reporting segments, and we are trying to issue contracts, safety stock, and consignment stock with all key suppliers. In addition to that, we have seen, for an example, for one specific product line, that we had some situations where our supplier for sub-assemblies of electronic equipment were in a shutdown situation, as well as limited capacity.
37:54 For example, this is a Pacific Instruments in California. While we have all their subcontractors are California-based, So in that case, we are trying to build as much inventory as we can. But from a general standpoint, we did every business, every product line, identify all the key material to assure business continuity. And we put the contract in place.
38:27 Great. Thank you very much. As a reminder, if you would like to ask a question, please press star, then one. Our next question will come from Bill Diddlem from Titan Capital. Please go ahead.
38:46 Thank you. I was hoping that you would talk a little more about the truck and van weight market, the rule changes, and more details behind the implications for your business, please.
39:01 Yes, it seems that in July, the European Union finalized its pending overload protection regulation with most EU member states opting for way-in-motion platform. We believe that at this point, if we look at the main considerations for them to pick or to select way-in-motion in respect to onboard weighing, It was really cost. This was the main consideration due to the fact that they will have to install certain weighing motion or weigh bridges installation at certain highways or certain roads in respect to install this onboard weighing on every truck and every van over three and a half tons.
39:57 Given the fact that we are already selling Most of our revenues of trackway and vanway is to the aftermarket. We do believe that given the regulation that will be effective as of May 2021, the aftermarket represents an opportunity for us, still a multi-million dollar opportunity, which will be driven by the new regulation in the next few years. Our solution is complementary to the Wayne Motion platform since it offers the truck fleet operators key value in terms of avoiding possible penalties before the detection by the Wayne Motion.
40:49 In addition to it, they increase safety and efficiency. So at this point in time, the revenue expectations are not as high as we have hoped but we still believe there is quite a significant upside as the regulation kicks in that we would enjoy an aftermarket if we look at the same round of penetration level as we did initially in the UK and France.
41:24 Thank you, Ziv. I'm going to make sure that I understand this, if I may, that had the rules come out most favorable for you than all new trucks and existing trucks. So all new trucks would have equipment on them to weigh them going down the road just as they come off the manufacturing line, and the existing fleet would be retrofitted. But instead... There will be bridges that will be put in place, and so none of the operators will be required to have the weighing equipment on their trucks and vans, but you believe that many of them will since you've already been seeing that happen so that they know exactly what their weight is before they come across the weighing bridges. Is that the right way to think about this?
42:25 This is correct given the fact that there will be penalties involved if you cross the way in motion and you will be fined overweight. But on the other hand, in terms of efficiency, if somebody just wants to be on the safe side and he will not load the truck or van over three and a half tons properly, he will have an embedded inefficiency Just to be on the safe side. So we believe that our systems will enable the truck operators and the van operators to optimize their loading before going to the way in motion. And we have seen this trend in France and the UK, and this is where most of our current revenues goes to.
43:18 But this is correct.
43:22 Thank you for the clarification. This will conclude today's question and answer session. I would now like to turn the conference back over to Steve Cantor for any closing remarks.
43:37 Thank you all for joining our call. Before closing, I do want to remind investors that we are participating tomorrow in the Jefferies Virtual Industrials Investor Conference, as well as another virtual conference being held by Sudoti in September. Again, thank you all and have a great day. The conference has now concluded. Thank you for attending today's presentation, and you may now disconnect.
Follow Vishay Precision Group, Inc. into a list and get an email when it puts out news.
Senior Director of Investor Relations
CEO and President
CFO
Analyst, B. Riley FBR
Analyst, Sidoti & Company
Analyst, Spiegel
Analyst, Titan Capital