Replay available

Pritika Auto Industries (NSE:PRITIKAUTO) Q2 2027 Earnings Call

Pritika Auto Industries (NSE:PRITIKAUTO) Q2 2027 earnings call, held 2026-11-11. Watch the replay and read the transcript on 6ix.

Wed, November 11, 2026 at 5:57 AMendedReplay
Pritika Auto Industries (NSE:PRITIKAUTO) Q2 2027 Earnings Call
Company
Pritika Auto Industries Ltd (NSE:PRITIKAUTO)
Period
Q2 2027 earnings call
Date
Wed, Nov 11, 2026, 5:57 AM ET
Replay
Watch the replay on this page · 45 min

On 6ix: 6ix.com/event/pritika-auto-industries-limited-pritikauto-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Ladies and gentlemen, good day, and welcome to Q2 and H1 FY 'twenty seven Conference Call of Pritika Auto Industries Limited. As a reminder, all participant lines will be in the listen only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Please note, this conference is being recorded. I now hand the conference over to Mr. Jay Jayne from Add Factors PR. Thank you, and over to you, sir. Thank you, Nadine. Good morning, everyone, and happy Diwali. Welcome to the q two and h one FY twenty seven earnings conference call of Pritika Auto Industries Limited.

0:48 Today, from the management side, we have with us Mr. Pritika Singh Ibar, Chairman and Managing Director Mr. Narendra Kumar Thyagi, Director Finance and Chief Financial Officer and also the IR team. We will begin the call with the opening remarks from the management, after which we shall open the forum for Q and A session. I must remind you that this conference may include forward looking statements about the company, which are based on the beliefs, opinions and expectations of the management as on the date of this call. These statements are not a guarantee of future performance and involve risks and uncertainties that are difficult to predict. I now hand over the conference to Mr. Pritika Singh Ibar for his opening remarks. Thank you, and over to you, sir.

1:37 Thank you, Jay. Good morning, everyone. Thank you for joining us today for Pritika Auto Industries Limited's Q2 and H1 Financial Year twenty seven Earnings Conference Call. First of all, on behalf of the entire Pritika Auto Industries Industries family, I would like to extend my warm wishes to all our investors, analysts and stakeholders on the occasion of Diwali. I wish you and your families a very happy Diwali and a prosperous New Year. I have with me on the call today Mr. Narendra Gumathagi, Director Finance and CFO and our Investor Relations team from AdFactors PR. We have already shared our financial results in investor presentation and media release with you. I hope you have had an opportunity to go through them. I would like to begin with a brief overview of our business and the developments during the quarter.

2:27 Pritika Auto Industries has built a strong presence in the manufacturing of machine castings and automotive components over the last five decades. Since our inception in 1974, we have steadily expanded our manufacturing capabilities and product portfolio. And today, we are among the leading manufacturers of sectoral components in India. Our manufacturing facilities across Munjab and in Maharshal Pradesh have combined a telco ratio of 72,000 metric tons per annum. We manufacture a wide range of components, including axle housings, wheel housings, hydraulic lift housings, differential carriers, brake housings, cylinder blocks and crank cases. Our integrated manufacturing capabilities from casting to machining allow us to supply ready to use components to some of the leading OEMs in the country.

3:15 Coming to our operational performance, we have maintained healthy momentum during the first half of financial year twenty twenty seven. Our production volume for Q2 FY 'twenty seven stood at 15,665 metric tons compared to 12,881 metric tons in the corresponding quarter last year, listing a growth of approximately 22%. For the first half, production volumes reached 30,000 metric tons as against 25,260 metric tons in the H1 financial year twenty twenty six, reflecting a growth of nearly 19%. This growth has been supported by healthy demand from our existing customers, better execution of ongoing programs and continued ramp up of our manufacturing operations. We have been working towards improving throughput utilization across our facilities, while maintaining quality and delivery standards expected by our customers.

4:04 On the customer front, our relationship with established OEMs continued to remain an important strength of the business. We have built a long standing association with customers such as Mahindra and Mahindra, Mahindra Savaraj, Tafe, Escorts Kubota, CNH Industrial and other leading manufacturers. During the quarter, we continue to receive repeat and incremental business from our customers, including Mahindra and Medra, Mahindra Savaraj, CNH and Escorts. These initiatives have been built over several years and reflect the confidence of our customers of the customers have in our manufacturing capabilities, product quality and execution. I would also like to highlight an important new development on the export front. Our subsidiary, Pritika Engineering Components Limited, has secured a high value export order of approximately INR 12 crores per annum from a prominent precision engineering manufacturer based in Italy. Under this hurdle, we will manufacture and supply specialized engineering components.

5:03 This is an encouraging development for us as it demonstrates our ability to meet the requirements of international customers for high precision components. Our capabilities in metallurgies, advanced CNC and HMC machining, along with specialized quality processes such as three d precision scanning have played an important role in supporting this opportunity. We see this arrangement as a step towards building a stronger presence in international supply chain and developing opportunities for repeat business. Another development worth mentioning is the progress of our earlier announced order from KEON USA. We are pleased to inform you that the product has now received customer approval and regular production is expected to commence in year twenty seventwenty eight. This is an important milestone in our efforts to strengthen our international customer base.

5:52 Alongside these developments, we continue to work on new product opportunities and deeper engagement with existing customers, which we believe will support our growth over the coming years. On the broader business front, we are also working towards increasing the contribution of exports and expanding our presence in segments beyond our traditional tractor business. Our manufacturing infrastructure and engineering capabilities provide us with an opportunity to address requirements across commercial vehicles and industrial applications. At present, approximately 77% of our business are contributed from CV segment, and we see an opportunity to gradually increase our presence there. We are also continuing to evaluate opportunities for geographical diversification and new product development while remaining focused on our core customer relationships.

6:42 I would also like to share an important development to Sanniga's sustainability and cost efficiency initiatives. In August 2026, Pritika Engineering Components Limited, on behalf of Pritika Group signed a memorandum of understanding with Spark Grid Private Limited for supply of solar power at a competitive tariff period for over twenty five years. This arrangement is expected to generate savings of approximately INR 110 crore for the group over the tenure of the agreement. Pritika Engineering Components Limited and Vitacasting Limited are expected to benefit from approximately INR 70 crore of these savings, while Pritika Auto Industries Limited is expected to benefit from the balance. As part of the proposed arrangement, a special purpose vehicle will be severed for solar power projects in which Pritika Engineering Components Limited is expected to hold 26% equity stake on behalf of the group subject to applicable approvals and documentation.

7:37 We believe this initiative will provide better long term visibility on energy costs, improve competitiveness and support our broader sustainability objectives. Looking ahead, our focus remains on building a larger and more efficient manufacturing platform. We continue to work towards our long term target of achieving installed capacity of one lakh metric tonnes by 2028. Our approach to expansion will remain disciplined with investment directed towards capacity creation, new product development and improving manufacturing efficiency. We will also continue to focus on value added products, export opportunities and increasing our share of business with existing and new customers. From an industry perspective, we remain constructive on the medium to long term outlook for the tractor and automotive components industry.

8:25 Demand for tractor continues to be supported by agriculture mechanization, government initiatives and underlying rural demand. At the same time, infrastructure development and increasing requirements in the commercial vehicle segment provide opportunities for the broader casting industry. We are conscious of the changes taking place across conventional electric and hybrid mobility platform, and we believe that our engineering and manufacturing capabilities will allow us to address evolving customer requirements over time. As we move into second half of financial year twenty twenty seven, our priorities will be to sustain the momentum in the production volumes, improve capacity utilization, strengthen our export business and work towards gradual improvement in margins. Cost optimization, operational efficiencies and disciplined working capital management will continue to receive management attention.

9:13 We will also remain selective in pursuing new opportunities with a clear focus on sustainable growth and returns from the investments we've made. With our established customer relationships, integrated manufacturing capabilities and expanding opportunities in domestic and international markets, we believe Pritika Auto is well positioned to take next step in the growth journey. With that, I would now like to hand over the call to Mr. Narinder Kumar Thagi, our CFO, to take you through the financial performance for the quarter and half year ended 09/30/2026. Thank you. Thank you, sir, and a very good day to everyone. Coming to our financial performance for the quarter ended 09/30/2026.

9:58 On a consolidated basis, the company reported net revenue from operations of INR153.19 crore compared to INR 116.45 crore in Q2 FY 'twenty six, resisting a year on year growth of 31.55. This growth was primarily supported by higher production volumes, healthy demand from our key OEM customers and continued execution of existing programs. EBITDA for the quarter stood at INR21.21 crore compared to INR18.61 crore in corresponding quarter last year, reflecting a growth of 13.97.

10:44 EBITDA margin for Q2 financial twenty seven stood at 13.85% compared to 15.99% in Q2 FY twenty twenty six. While margins continue to be impacted by elevated input costs and the evolving product mix, we have seen an improvement on sequential basis with EBITDA margin increasing from 13.45% in Q1 FY 'twenty seven to 13.85% in Q2 FY 'twenty seven. Profit before tax for the quarter stood at INR9.55 crore compared to INR8.62 crore in Q2 FY 'twenty six. Profit after tax increased to INR7.43 crore as against INR 6.61 crore in corresponding quarter last year, registering a growth of 12.41%.

11:40 Basic earnings per share for the quarter stood at 0.39%. Coming to the half year performance. Consolidated net revenue from operations for H1 FY 'twenty seven stood at INR 298.16 crore compared to INR 231.06 crore in H1 FY twenty twenty six, representing a growth of 29.04%. EBITDA increased by 12.93 to INR 40.72 crore compared to INR 36.05 crore in the corresponding period last year. EBITDA margin stood at 13.66% as against 15.60% in H1 FY 'twenty six.

12:34 Profit before tax for the first half was INR 17.80 crore compared to INR 16.46 crore in the corresponding period last year. Profit after tax increased by 14.52% to INR 14.55 crore compared to INR 12.70 crore in H1 FY 'twenty six. Basic EPS for half year stood at INR77. Overall, we have delivered healthy growth in revenue and profitability during the first half of the FY 'twenty seven. Going forward, our focus will remain on cost management, improving operational efficiencies, maintaining financial discipline and ensuring that our investment contribute meaningfully to company long term performance.

13:33 That's all from my side. We can now open the floor for questions and answers. Thank you. Thank you very much. We will now begin the question and answer session. Anyone who wishes to ask a question may press star and one on the touch tone telephone. If you wish to remove yourself from the question queue, you may press star and two. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while the question queue assembles. The first question is from the line of Amit Mehta from Mehta Investments.

14:23 Go ahead. Hi, sir. Good morning. Am I audible? Yes. Yes. You're audible. Okay, sir. First of all, thank you for this opportunity. So my first question is on the growth potential. So how does the management view the growth potential of the export business over the next two to three years? And what target contribution on export does the company aim to achieve as a percentage of the overall revenue in the medium term? See, exports has a lot of potential, especially in Europe and USA. Now recently, we have got a very good order from Europe, Italy. And it's I mean, it's just a first step.

15:08 And we expect that this INR 12 crore which is a proposed order for 12 crore per annum, which we can easily make it in next three years, it can easily go to around INR 40 crores to 50 crores. That is the potential. That is the size of the inquiry. And that I mean, we what we expect in next three to five years, export should contribute minimum 10% to 15% of our sale. Okay, sir. My second question will be on the presence in the tractor components. So how is the company progressing with its diversification strategy across the automotive and the industrial applicant? And which segments are expected to emerge as a key contributor to the incremental growth of the company?

15:58 See, at present, we are primarily to tractors. And tractors also, we are now diversifying. We are early into small and medium castings. Now we are diversifying into large castings. So that is one. Then other areas, which we are trying to diversify to go into the construction equipment. We are already going to give into ACE, then we have added recently added Q1 India and then we are adding there are a few more new customers, which we are under discussion to add construction and material handling equipment to our portfolio. Okay, sir. So on that on a follow-up question, so what specific initiatives, product offering and the customer acquisition opportunities is are you all pursuing to increase the contribution?

16:46 Since recently around three years back, we added a new technology, lost form casting. So that has given a lot of advantage in large castings and some critical castings, I mean, which are still being imported from China. So recently, last year, we developed I mean, rather this year only we developed one large casting around five thirty kgs as the iron casting, which was being imported from China only. Only China was manufacturing that. So we were the first one in India to develop that casting. And now for the similar components, we have got very good inquiry from other potential customers for those kind of products. So that is so LSC was a new technology for us, for India also, for us also.

17:33 And that has given us a very good advantage over our competitors. Okay, sir. Understood. One last question from my side. One of our subsidiaries, Pritika Engineering Components, has secured a significant order from Italian precision engineering manufacturer. Yeah. Could you please throw some light on it? See, We were in discussion with this customer for last almost seven, eight months. So they had visited us in January. Then we went and met them in March, then we were in discussion with them. So this is a heavy casting component for application in tractors in Italy. And this initially is a I mean, a small order of INR 12 crores this which has a potential to grow up to INR 40 crores to 50 crores in next three years.

18:29 Okay, sir. Understood. Thanks for answering my question and all the best for the future. Thank you. Thank you. Thank you. Next question is from the line of, an individual investor. Please go ahead. Hello. Hello. Yes. So I just have questions. So first question is the company has highlighted various opportunity arising from high LXL load capacity for commercial vehicles in production spending and railway modernization. How does the company position to capitalize on this opportunity? And what is the time line, expected timeline for this segment to continue Yes. To grow As far as the railways are concerned, we are very seriously working on that last one point five years. So our whatever CapEx was required, it is almost complete.

19:21 We have start we are developing two or three components for railways, which we plan to give for trials to railways. We are going through the RDSO route by say by January or February. And then after trial and testing, we expect that to give some start supplying something from H2 of financial year next year from say September, October of next year from 2728. So that is our target for railways. For heavy commercial vehicles, so we are already supplying to a show client. And we are increasing our product portfolio over there and increasing the volume of our existing products also in that. That is our basic target for Target.

20:13 Okay, great. And also the company has invested in lost foam casting technology through Meta Casting. So what advantage does this technology offer in terms of product complexity or customer acquisition or manufacturing efficiency? This this casting is... See normally if you understand casting is greensand molding, whatever is being used in India presently for large castings in greensand India is greensand molding. But this is a different technology. I mean this is not a new technology for globally. It was technology which was developed in late 1970s in Europe for critical castings. But then 1980s and 1990s, they developed it. Then 1990s, foundry started closing down. Then 1990s, this technology was adopted by China.

21:02 Then China mastered this technology and as was second foundry with this technology in India. This technology is new to as of now, it is new to India. There are very few, I mean, foundries working on this and not none is at our scale. And we and this gives advantage that you can whatever you can green sand is a very large CapEx. So this at a lesser CapEx, you can produce same quality of castings at a cheaper cost. So my follow-up question is, are there any opportunity to expand the contribution of the same to overall business? Yes. Not to worry, is this technology is suitable only for critical castings and large castings, not for normal products, for low value products.

21:53 Okay. Thank you. That answers my questions. Thank you. Thank you, Punad. Thank you. Next question is from the line of Janisha from SK Investments. Please go ahead. Hello. Good morning. So I had a couple of questions. First is, what is the expected utilization and return profile of the investments being made towards the capacity expansion and manufacturing infra? Pardon? I didn't get your question. What is that? Hello? I wanted to know... Hello? Am I audible? Yeah. Yeah. You're audible. Yeah. I just wanted to know the expected capacity utilization and the return profile of the investments that have been made.

22:39 See, capacity utilization as far as we are concerned today, for our greensand, we are working almost at 90% capacity. And for our LFC, we are at 50% capacity. So that is our capacity. In Greensand, we are making an investment. We are increasing our capacity by six fifty tonnes per month. So that is what our expansion is presently going on. That is a fee we will get. Okay. Around the 1,800 tonnes to our existing capacity, which will be ready by, say, end of this month. Okay. And Pritika Engineering Components Limited has secured the Italian export order and received product approval from Kyon USA.

23:32 So how significant is the subsidiary expected to become in the overall consolidated business? See, at present, we say it is almost if we see capacity wise, it is almost I mean, if I say subsidiary, Pritika Engineering is roughly at present capacity is 1,400 divided by 6,000 is roughly 23%, 2523%. It is as we are expected to grow, engineering should grow to around 30%, 35% in coming one, one point five years. Okay. And lastly, it is on the balance sheet front, like the consolidated net debt to equity ratio is at 0.67 in FY 'twenty six. So with the planned capacity expansion and increasing production requirements, how is it going to be further?

24:29 It will mostly be a combination of debt and equity. Debt position is comfortable, debt equity is comfortable. So some I mean, major part would be debt only and some part would be equity. So the net debt to equity is expected to increase in future? Yes, yes. Okay. Okay. Thank you. Thank you. Thank you. Next question is from the line of Vikram from RK Advisory. Please go ahead. Thank you for the opportunity. Am I audible? Yeah. Yeah. You're audible. So my first question is, sir, are other expenses increased from 28 crore in Q2 FY twenty six to roughly around 34 crores in Q2 FY twenty seven. So could management provide a breakdown of the key cost components driving this increase and indicate whether these expenses are expected to moderate in the coming quarters?

25:27 The other expenses, what they have increased is it is in line with the percentage wise, it is okay. I think it's same. It is in line with the increase in sales. Okay. Got it. And another question is on the interest expense side, that expense expenses increased to INR 6.33 crores in Q2 FY 'twenty seven, which was around INR 5.60 crores in Q2 FY 'twenty six. So what are the key factors contributing to this increase? You are saying that interest has increased, percentage wise, it is same, Migrant. Percentage wise, is roughly around the same percentage what it was in the last quarter and it has gone 25%, it has reduced.

26:13 Provided it has reduced as a percentage. Got it. Understood, sir. Understood. Thank you. Yes. It is in line with the growth only. Understood. Understood. Next question is from the line of Poonam Jain from Jain Investments. Am I audible? Yeah. Yeah. You're audible, Pritika. Yeah. So the company has highlighted its advanced CNC machining infrastructure radiography and three d precision scanning capabilities as key differentiators for international customers. So how do these capabilities position Pritika against established global component manufacturers?

27:06 And what opportunities are being explored to secure similar engagements? See, now the facilities, we have, we have a very right mix of Indian and Japanese machines, so that we can cater to both the domestic and international market. And infra wise, we are in line with all the I mean established manufacturers, all global manufacturers, whatever we have seen the supplier base of big customers in Italy also, in Germany also. So our infrastructure is almost at par with them. And with the balance of users of Indian and Japanese machines, we make the manufacturing very, very cost effective for our customers. And with our I mean backward integration for foundry, so we've become a single source for casting and machining, which are very, very less in Europe and U. S. A. Both. I mean there are hardly any manufacturers which have both casting and machining at one place.

28:11 So for that, that gives us a lot of advantage over I mean our competitors in maybe Europe or U. S. A. And whatever orders we are getting, we are getting because of that only, because one, we are a single source for casting and machining. Okay. Okay. Got it. So my next question is with the QIAON USA product approval, now we received and regular production is expected to commence in FY 'twenty seven. So what are the next milestones before commercial supplies begin? Next milestone is I mean, once this product, this is new platform for them, so which goes into production next year. And as and when we I mean, it is recognized, we will get the orders for that.

29:02 And we hope in next two to three years, this becomes one of our K1 USA becomes one of our major customers And it becomes also becomes a stepping blockers for The U. Market, which itself is a very huge market for machine castings. Got it. Got it. So then and the last question from my side would be that the company continues to receive repeat and incremental business from established OEM customers, including M and M Swaraj and CNH Industrial. So are these relationships translating into additional product programs or higher wallet share? Yes, So I mean, we are still process of developing new components for our existing customers also, whether it is whether it is Mahindra, whether it is CNH, whether it is Scott's.

30:00 So I mean, we have very, very strong relations with our customers. You see with M and M, it is almost twenty two years, more than twenty two years. With escorts, it's almost 50 more than fifty years. With the tap rate is twenty eight years. So we have a very, very strong relation with our customers. And I mean, they ensure that we grow with them. So that is our basic strength of our company, our long standing relations with our OE customers. Okay, okay. Got it. Thank you for answering and all the best for the future. Thank you, Punav. Thank you.

30:47 Next question is from the line of Mayurish Rawat from Invest for Adio. Please go ahead. Hello. Good afternoon, sir. Thanks for the opportunity. Sir, the company has Yes. So this company has outlined a target of increasing the installed capacity around one lakh metric tons by around 2028. Right? Yeah. Yeah. Could you please provide an update on the expansion road map, including the proposed phasing and everything? The expansion road map is that we plan, I mean, another we are adding another 8,000 tonnes, 7,800 tonnes immediately, which capacity would be ready by end of this month. This will take our capacity to 80,000.

31:33 And we plan to add another 24,000 tonnes by, say, March 2028. For that, we are, I mean, cross of acquiring a land. And maybe so next year would be the construction period for that. And that our target. By end of twenty twenty eight, we should have one lakh tonnes of installed capacity. Calendar year 2028, right? Yes, twenty twenty twenty eight. Okay. And sir, as production volumes are scaling up, so what do you like, what operational efficiency and economic scales are contributing to margin improvement if any specific automation or mechanism or cost optimization initiatives are underway?

32:21 Yes. See, we I mean, you know, foundry is a labor intensive industry. So we have now started the mechanization of in our foundry also and fattling was one of is one of the bottleneck areas. And we are procuring some machines for fattling automation, that is one. Then secondly, in machine shop, we are going for robotics and gantry, wherever it is possible, wherever it is high volume, we are going from we are going for robotics and gantry application to reduce the manpower cost. Okay, okay. And across our five manufacturing facilities, are you planning any capacity increase in the existing facility? Or are we going to start this in new manufacturing? So we are in the process of expanding our facility in Pritika Engineering, which is under expansion and which I told you will be ready by this month end.

33:23 And then other than this expansion would be a greenfield, where it will be a new location and a new plant. Okay. That is from my side, I'll join back the queue. Thank you. Thank you. Next question is from the line of Janel Patel from Avi Advisors. Please go ahead. Hi. Am I audible to you, sir? Hello? Yes. Hi. Am I audible to you? Your voice is very low. Can you hear Hello. So my first question is, like our revenue is grown by around 31% in Q2, but our EBITDA grew by almost 14%.

34:16 So what are the factors which is responsible for this lower growth rate in EBITDA, sir? Basically, that is a raw material prices. In Q2, there was a lot of increase in raw material prices, which normally are passed on by next month, next quarter. That was one of the reasons. That was the reason. Okay. Okay. And our EBITDA margin has also been decreased from by almost 200 bps in Q2. If you compare the Y o Y basis. That is the main reason, raw material prices. Raw material prices, is lot of volatility in raw material prices. Okay. So what are the major raw material, sir? Probably scrap, scrap is our and pig iron are major raw materials.

35:03 Pig iron and scrap are our major raw materials. Okay. And what is the pass through period, Like how like what are the time line for this cost pass through? This is one quarter on quarter. Okay. Quarter on quarter basis. Yes, yes. Okay. So next quarter we can assume like a better EBITDA margin from this? Yes, yes, yes. Okay. Any guidance that you wanted to give for Q3, sir? Q3, I mean, as of now, I mean, normally Q3 for us is for tractor industry, for Indian general industry also is, I mean, lower than Q2 sale wise. As Okay. All planned maintenance is taken December and all after Diwali sales of all products dropped in India, whether it is commercial vehicle, whether it is passenger vehicles, two wheelers or tractors.

35:57 So Q3 is normally down, but last year, it was up. So let's see how the market goes. Another one week, ten days, the numbers will be out for the season. Let us see how things go. But we as far as October retail sales are concerned, the market seems to be good. Market seems to be open. I mean it is October was as good as last October. So we hope this momentum will continue. Okay. Okay. Okay. And in terms of our revenue trajectory sir, what is our expectation in terms of for our revenue for let's say couple of years, two or three? See, I mean we project to be our target is to grow by anything between 15% to 20% year on year. 15% to 20%?

36:46 15% to 20% year on year. Okay. Okay. With like and what will be the margin assumption, Margin, we I mean, number one is the same healthy margin of roughly 14% to 15% EBITDA. But with LFC coming in, once the LFC is streamlined, it goes around above 50%, 60%, then our EBITDA margin should increase slightly. And sir, one thing I have noticed like our ROE ratios is quite fluctuating like it's not in a one line, like not in an increasing, it keeps on fluctuating. So what are the reasons like if you see your ROE, it is keep on fluctuating from eight to six, then eight then six. So what are the key reasons for this sir?

37:38 ROE. Yes, ROE. Any ratios like ROA, ROE. So it's keep on fluctuating and our net debt to equity is also increasing sir. So what are the reasons for this? Debt to equity is 0.67 only. So it is not increasing. Yes, because whatever growth we are doing, I mean last year also we took debt. So that is one reason for that. And for is See, this is ROE is in line as per last year only, not much fluctuating. But because of expansion, have raising capital as well as the debt. So therefore, the mix of debt and equity, it changes on a risk.

38:26 Okay, okay sir. And one last thing on the industry side, sir. How do you see the current industry, which is going on and like in terms keeping in the mind of all the geopolitical issues which is going on, so how do you see industry going ahead, sir? Industry is primarily domestic industry. Mean, Indian doesn't hold much of the tech tractors. That industry is domestic. And I mean, agriculture is a I mean, mother industry, mother kind of thing. People have to eat farmers have to grow, people have to weather the war or anything. Tractor industry, from it is slightly insulated from geopolitical kind of thing. I mean, normally though sometimes like during Ukraine war or other wars, tractor industry benefited, agriculture industry benefited because I mean the grains became costly, so farmers got a good pricing for export opportunity was there.

39:27 So I mean this industry is I mean geopolitically it is isolated, 90% is isolated. There are major geopolitical politics doesn't have major effect on the tractor industry. Okay. Okay. Fine, fine, sir. Great, sir. Thank you for detailed explanation, and best of luck for the future. Thank you. Thank you. Next question is from the line of Manaswini Mukherjee from Oracle Investments. Please go ahead. Hello. Hope I'm audible, sir. Go I have a few questions. The first thing being that the company has a diversified product portfolio. We cover axle housing, differential cases, crank cases, etcetera, etcetera. So are there any plans to introduce higher value or say more technically complex products that could then help us improve overall realization per ton?

40:24 Yes, yes. We're already process of that like crank cases was crank cases one cylinder block is other. And now we are moving to high I mean, large castings, where even the competition is less and the valuation is better. Like differential I mean differential carrier, differential housings, those kind of product, transmission cases are there, big transmission cases are there. So for those products where the valuation is higher, we are moving to large casting where the number of players is less, value addition is higher. I mean, get better profitability. So we are moving into those product portfolios now. Okay. That makes sense. And gaining our market competitiveness and the market share in small and medium castings medium castings, we are slowly and steadily moving into large castings.

41:13 Okay. That makes sense. Another question that I had was that our presentation mentioned that approximately 60% of India's tractors are actually manufactured in the region where our company facilities are located. So then how do we take advantage of this geographical benefit? And how does that then translate into logistical efficiencies, customer responsiveness? Ma'am, I mean, if you see us where we have played and all, we are now the largest manufacturer of machine castings in North India. We are the largest manufacturer of machine castings in North India. And that is the advantage we are getting. We are getting repeat orders, new orders from all our customers. Is the advantage we are having and we are taking advantage of that also.

42:01 Is there also like competitive pricing advantage that we get? Yes, we do that. I mean, if you see around five years back or ten years, most of the critical costing used to come from Western Region or Southern regions. Now since we have started, we have diversified into that. So we are getting advantage of that. Okay. One last question that I had is the companies of both tractor and commercial vehicle OEMs. So are there any seasonal demand patterns that we should be mindful of while assessing these quarterly performance or product volumes? The seasonal I mean, tractor industry, if you see, it is seasonal industry. I mean, almost actual sale is for seven, eight months from same from one Navrat for hours, which are in March and or April to next this Diwali season. So rest of the season is basically stock building.

42:58 And same is for others also. I mean India, everything is revolves around Diwali, whether it is commercial vehicles, whether it is passenger vehicles, two wheelers, maximum sale is around festival seasons only. Yes, volatility is there, volatility is there, that is part and parcel of the business. Okay. Okay. That makes sense. Thank you, sir. Thank you, and good luck for the future. Thank you. Thank you. That was the last question for today. I now hand the conference over to Mr. Harpreet Singh sir for closing comments. Thank you, everyone. Before we close, I would like to reiterate that our focus is not just on growing the business, but on building a stronger and more sustainable organization for the years ahead.

43:51 We have a clear direction for the company and efforts we are making today are aimed at creating the capabilities and customer relationships that will support that journey. I would like to thank our employees for their dedication, our customers for continuing to place their confidence in us and all our shareholders and investors for their continued interest and support. Thank you once again for joining us today. We look forward to interacting with you in the coming quarters. Have a good day. Thank you very much, everyone. Thank you. On behalf of Pritika Auto Industries Limited, that concludes this conference. Thank you for joining us, and you may now disconnect your lines. Thank you, Amit and team. Thank you.

Follow Pritika Auto Industries Ltd into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from Pritika Auto Industries Ltd