Replay available

MM Forgings (NSE:MMFL) Q2 2027 Earnings Call

MM Forgings (NSE:MMFL) Q2 2027 earnings call, held 2026-11-13. Watch the replay and read the transcript on 6ix.

Fri, November 13, 2026 at 5:40 AMendedReplay
MM Forgings (NSE:MMFL) Q2 2027 Earnings Call
Company
MM Forgings Limited (NSE:MMFL)
Period
Q2 2027 earnings call
Date
Fri, Nov 13, 2026, 5:40 AM ET
Replay
Watch the replay on this page · 56 min

On 6ix: 6ix.com/event/mm-forgings-limited-mmfl-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Ladies and gentlemen, good day, and welcome to Forgings Limited q two FY twenty seven post results earnings call hosted by three sixty one Capital Market Private Limited. As a reminder, all participant lines will be in the listen only mode, and there will be an opportunity for you to ask questions after presentation concludes. Please note that this conference is being recorded. I now hand the conference over to mister under manager Raj from three sixty one Capital Market Private Limited. Thank you, and over to you. Thank you. Welcome all the Management, we have with us today Mr. Vijay Sindhakrishnan, Chairman and Managing Director and Mr. R. R. Raghunathan, CFO.

0:56 I'll now hand over the call to the management for the opening remarks to follow the question and answer session. Over to you, sir. Thank you, Jairaj. Good afternoon, everybody. My name is Uddya Shankar Krishnan, Managing Director of the company. And I have with me Mr. Raghavanath, the CFO. I'd like to take you first through the Q2 results and then open the floor for Q and A. Very briefly, I will start with the details of our Q2 and H1 performance. Overall in H1, we have achieved a turnover of INR $9.78 crores and about 44,000 tonnes of sales as against in this 19,000 tonnes 19,700 tonnes was in the first quarter and 24,200 tonnes was in the second quarter.

1:52 Overall, the sales for the second quarter itself is INR551 crores. We have also merged DBS Industries into Forgings and the results presented are consolidated results. We have also included in our overall pack for the half year is INR64.29 crores of land sale and profit arising on that is about INR54 crores. EBITDA for Q2 stands at INR110 crores, about 20%. And this you can include about 0.5%, 0.7% of prior quarter's earnings due to price increases, etcetera. So to that extent, the EBITDA levels of the second quarter will have to be mildly corrected.

2:52 Overall EBITDA number stands at 19.7%. Finance costs have come down despite higher utilization on the working capital side due to growth numbers From 21 crores of interest, we have cut it down to 19 crores. Average sales realization stands at about two point Sorry to interrupt you, sir. We are losing on your audio. I'm speaking a bit slowly, Rasee. That... That's it. On the sales realization, we are at 2.23 lakhs per ton. Domestic sales stand at 66% and export sales at 34%.

3:44 Within geographies, Europe, India has comparing with it, F-twenty six. India has gone down to 6667% from 72%. Europe has gone up from 12% to 13% and America, The U. S. From 12.5% to 16.5%. And South America remains the same. Our automotive overall exposure is 85%, of which CV alone is 70% and PV is 14%.

4:36 Off highway has steadily moved up to 14% mark, slightly dipped this year from 15% to 14%, largely because non auto grew sorry, auto grew much faster. Over the last few years, our off highway and tractor has grown from 56%, 7.5% to the 14%, 15% level where it is today. So this year, getting down to a quick outlook for the coming for this fiscal, we are expecting about 50,000 tonnes of sales for H2, taking the overall to the region of 90,000 to 95,000 tonnes for the year.

5:25 A sales level we expect to cross INR 2,000 crores for FY 2027 and FY 2028, we expect to cross the INR 100,000 mark in terms of sales number, in terms of tonnage and also a turnover in the region of INR 2,400 crores to INR 2,500 crores. These are the brief points regarding our performance in FY in H1 of FY 2027. If you have now, I would like to throw the floor open for any further any questions. We'd be happy to take them. Please identify yourself before you make the question. Thank you. Thank you very much. We will now begin the question answer session. Anyone who wishes to ask a question may press star and 1 on the touch tone telephone.

6:23 If you wish to remove yourself from the question queue, you may press star and 2. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while a question queue is assembled. The first question is from the line of from Investment. Please go ahead. Yes. Thank you. I have one question. See, given that the absolute and revenue numbers are heavily influenced by broader OEM production schedules and also macro cyclicality, which are essentially factors outside our direct control. Has the management considered training annual guidance in terms of outperformance over underlying industry growth? For example, points over the OEM growth, that would really help investors isolate and appreciate market share gains as well as wallet share expansion regardless of where we are in the cycle because we are a derivative of the OEM demand and OEM demand is also changes based on how they perceive their production, their offtake, etcetera.

7:37 So have you considered or have you also looked at giving the guidance in terms of outperformance over industry the industry growth versus absolute tonnage or revenue numbers? This is my first question. Thanks, Lakshmi for your answer to your question. That's a good point. We'll work out the tangle and compare ourselves with industry growth and see where we are in terms of wallet share gain and overall riding the wave itself. The very valid point, we'll work it out on those points. Thank you. Thank you. The next question is from the line of Ashish from LEO Capital. Please go ahead.

8:25 Congratulations on a good set of numbers, sir. I have two questions. My first question is how much revenue can the current forging and machining base support before new CapEx is needed, and where is utilizations today? We stand at about, as I said, this year, thousand to 95,000 tonnes. Our capacity, as we speak, is lakh and 30,000 tonnes. From lakh and 20,000 tonnes, we've added a 4,000 tonne press at our Vizalumilai plant. So our capacity has gone up from lakh and 20,000 to lakh and 30,000 tonnes. So this almost 95,000 tonnes should be viewed against that number. Of course, capacity has come only in Q2, but still we talk about it in an annualized manner. If you were to analyze the capacity, I would say 127,500 tonnes, if you were to split some hairs.

9:21 On that, we've achieved we'll be on target to look at 95,000 tonnes. This capacity of ours is good enough to take us to about 120,000 tonnes. And sir, we have had substantial investment on the machining. Sorry, sorry, you were saying? With the investments in machining that we have made and which we are making. Sir, but how do we see the machining wafer? Sorry? We have added around thousand crores of... There is around thousand crores of block, like mentioned in the last con call in our asset base today on the machining side. How much can that generate? Like, do we see it as a separate CapEx or, like, how how do you... How do we see that?

10:15 We do see the CapEx separately between Ford shops and machine shops, of course. And we have invested over 1,200 crores in the last five last six years, of which a significant portion, $7.50 plus would have gone into the forging side, into the machining side. Sir, on the machining side, what is our utilization? Right now, our utilization will be in the region of around 80%. 75 to 80%. Okay. Yeah. Okay. And what is the total revenue this can generate? We have also added we are also adding machining lines. It's an ongoing organization. Right? So live, we are adding machining lines as we speak.

11:08 Some are expansion of existing product lines. Some are new product lines. Some are for new customers. So all that together should be comfortable to take us to INR 2,400 crores to 2,500 crores. Provided, of course, market fits in into that specific job mix that we have planned for based on customer demand. Sir, my second question is around the heavy press. Once the press starts production in Q4 FY 'twenty seven, how long do OEM qualifications typically take for heavy parts? And what does the ramp up look like there? How much of the early volumes of existing parts moving on to the press versus new programs? And when do you expect meaningful utilization?

11:55 Yes. The heavy press, as I've been saying in most of the calls, remains largely unsold. So that is the growth driver beyond the 2,400 crore mark. And up to that level, some parts which are not producible on the INR8000 ton press would go on the INR16500 ton press. This press would be commissioned in Q4 of this year and SOP would be by Q1 of next fiscal. OEM qualifications can take anywhere from six months to two years depending upon the OEM, the depth of engagement with them and the launch of that particular part at from that OEM.

12:42 So this is a very broad number, I know, but that's the range that we are working with right now. Some products which are existing can move directly over there, qualification is almost pre done you can say. We would be able to use about crores to INR100 crores out of that in the at a run rate on an annualized basis to start with and ultimately move it to around INR250 crores to INR400 crores range for which we may have to invest in additional machining setup and also look at parts. But up to this INR2500 crores projection, the orders are available with the company. Beyond, we are looking we have to get new orders and growth will come out of those new orders, which also includes 15,500.

13:35 I hope I've made myself broadly clear. Yes, sir. Yes, sir. Thank you and good luck. Thank you. Thank you. A reminder to all the participants to press star and 1 to ask a question. Ladies and gentlemen, if you wish to ask a question, you may press star and 1. The next question is from the line of from Precision Capital. Please go ahead. Sir, congrats on a great set of numbers. So my first question is if you could explain, like, what is driving the strong growth in Europe and U. S. That will be very helpful. The Class eight thank you, Anubhav.

14:25 The Class eight market in The U. S. Is running pretty strong. So that is driving numbers over there. Somehow that coincided with a drop in the customs duty, the tariffs in The U. S. From April onwards. The coincidence is very amazing, the increase in demand plus the drop in tariff, but all the same. We are none of our customers have balked from buying because of the tariff. So I would assume that both are independent. Europe has been moving along at a sedentary pace and that continues. Of course, we are deepening our engagement with many European OEMs that continues to give growth for the organization.

15:14 As we move forward beyond FY 2028, since we are looking at market side, some of the points which I have not covered in my opening remarks, We are also engaging with several OEMs MMCs and we expect our export revenue to double or triple from current levels. So possibly reach INR750 crore mark or even sorry, INR1000 crore mark over the next few years. We would expect a significant portion of growth to come from export markets beyond from FY 2028 and beyond.

16:03 And sir, this North American Class eight truck market, the growth that you are witnessing, is it because of the imminent like emission norm changes which are on the horizon? And how sustainable do you think that is like this strong growth? Sorry, can you repeat your question again, please? Sir, I was saying that the strong growth in North American truck market, is it being driven by like emission norm changes, which are supposed to like happen next year, I think? So and how sustainable do you think this growth will be over like next year Yes, or valid point. The emission norms do play an impact in terms of a pre buy. But also what has happened is that last few years, North American buy truck buy has been moribund, very stuck in a rut. And ultimately, their replacement is a huge driver of growth. There are two drivers of growth for the truck markets, particularly in North America.

17:22 One is norm changes that leads to pre buy and the second is replacement demand. The replacement demand, I would expect it has been pretty stuck for the last couple of years. So, basic level of replacement demand would be there. Over and above that, we have the emission norm changes and therefore some amount of pre buy. The pre buy will disappear by Q1 of next fiscal. And thereafter, the base load norms the base load demand will be there. Overall, I would like to conclude that the North American truck market is pretty cyclic in its nature. No doubt about it.

18:17 It's an inescapable fact. But do you think that like, obviously, the P buy will go, but over the next at least two, three years, do you see it in a sort of up cycle because of the replacement demand? I wouldn't say up cycle, but at least the fall will not be hard. Yes, sir. This is my... And sir, even in Europe, is there a like replacement cycle that we are witnessing? Because what we gather is that even in Europe, the CV cycle got elongated like the replacement cycle.

19:08 So is that happening in Europe as well? In Europe, it's largely replacement driven, largely replacement. Over the last decade or two decades, we haven't seen any pre buy surging in Europe at any point of time. Of course, our penetration in the European and U. S. Markets at CV level could improve quite a bit at global level itself would improve quite a bit with our foray into heavier parts. See, the parts that come out of our HF heavy folings as we call, hardly any is exported at this point of time. Most of it is 99% of it is domestic market.

19:57 So there's a good potential for us to focus on the exports, which is why I'm pretty bullish on export revenue. Good. And sir, my final question is that sequentially, I think there has been almost a 9%, 10% realization improvement, the sales per tonne. So is it because of like pass on of higher steel prices? Or is it because of better product mix? Some color on that will be useful. The increase is on two counts. One, higher value addition. Our machining mix has gone up significantly to 65% from 56 odd percent.

20:50 And our we also have price increase on account of steel and conversion increases that contribute some factors. So both together have contributed a realization per tonne increase. Overall, from $20.08 lakhs per ton, it has gone up to 2.15 lakhs per ton. And sir, what would be our total machining capacity now? Machining capacity is very gated. Last call, I made a commitment to look at the machining capacity in terms of an overall number.

21:39 I'm not able to pin it down yet. But if we look at overall numbers and say 65% of sales is from machining and we are at 807570% to 80% on capacity there. So we still have a headroom of around 25% to 30% in terms of machining capacity. But we are also creating capacity as we speak. So that's really a moving number. I should have looked at this number in the last few months, and we've been very busy with customer side and focusing on deliveries quite a bit. I'll... I comment next time, I'll have that number pinned down, machining capacity and utilization. The next question is from the line of from Nomura Capital.

22:40 Please go ahead. Hi. Thanks for the opportunity. So I have just two questions. So, sir, my first question is, could you please walk us through how you see the margin profile of the business evolving over the next three to five years? And what do you think will drive this? Very deep question, Dhruv. Over the next few years, I would expect Forgings margins to be positive. The bias is positive. First, we moved out of a rut that we were in the last couple of years. So from Q1, we have started moving surging forward a little bit. Margin expectation is positive. Bias is very much positive on the back of better utilization.

23:29 Now even then, in Q1 and Q2, we have been driven either and together by huge increase in input costs, steel, no doubt, also our other manufacturing costs have gone up. And most of much of management bandwidth was spent in negotiating and arriving at and securing supplies. Once the dust has settled as it has now, we are now turning our minds back to cost reduction and focusing on more efficient buying as well as efficient utilization. So all these, I would expect Forgings internally at least, we have a huge scope on cost reduction ranging anywhere from INR30 crores to about INR100 crores. It's a big number and you can imagine INR100 crores on a INR2000 crores base is a 4%, is a 5% margin expansion possibility.

24:31 So while I would not like to hazard a guess or get committed on these numbers, there is a good scope for cost reduction. Let's put it that way. Next call, please don't pin me to that INR100 crore number. I'm just giving you our see, we are all there to dream. And from that, we move on how we can cut costs or improve margins or improve sales. So we are dreaming about not dreaming in a sense, simply dreaming. We are consistently thinking about and qualifying how we can improve our margins. There is scope for margin expansion. That was really helpful, sir. Thanks for the color. My next question We are is yes, on the business side, I should also say a lot of growth beyond 28% will come from export markets.

25:22 With our bigger press, we will be having access to bigger truck truck OEs all over the world. We can supply them any part, so that doesn't restrict them from coming to us for only a set of parts. And the response that we are receiving from customers as we discuss with them about opening up our new press, the responses have been very positive. So FY 2028 and beyond, we should see a lot of growth from exports. How much of this new CapEx will be required, all that will have to be worked out. Maybe we can sacrifice a little bit of domestic capacity and divert it to export. Those are numbers that would have to be evolved over time. But all I can say at this point of time is that we have subject to macroeconomic conditions, we have order visibility for about INR2400 crores, INR2500 crores in FY twenty twenty eight. Of course, this does depend on an assumed cyclicality of the CV markets globally.

26:24 Thanks for the color, sir. My second question was with Happy Bharat Forg and Ramakrishna also adding or running heavy presses, How do you see pricing in heavy beams and crankshafts evolving? And where does MMFL have the right to win? Is it by customer? Is it by geography or any part type? We have been there seven years back. We were zero on the heavy forging side. Today, we have joined the fray. We were number three. And now there is a fourth player also added. Of course, they were happiest been significant in the crankshaft space. They are also into the other two parts, axle arm and beam. I see no issues. I see a lot of work coming India's way.

27:12 There is enough and more for the top four to do in terms of handling growth. A lot of work will come our way and our own truck industry, which has also been running slow over the last few years is coming to its own. There is also a replacement demand that comes in India. And as wage costs here go up, truckers will find the necessity to keep their fleets young and healthy rather than old and dilapidated. Of course, there'll always be people who will use sluggish trucks, but generally, the long distance market will be with and the age of engines, the cleanliness of these new vehicles in terms of emissions, plus their mileage, operating costs. When I talk to even our people who provide buses for our plants, all of them are saying that it's cheaper to if you have the wherewithal, it's much cheaper to buy a new vehicle and to operate a new vehicle than an old one.

28:18 So that mindset will slowly change and the scrappage policy coming in nudged here and there by the government, self imposed scrappage from government bodies, all that will move in a positive direction and the truck industry in India will be should be on a strong ticket. Thank you, sir. That was all from my side. All the best for the next one. One more thank you. Thank you so much. One more point is that Forgings non auto sales stands at about 15 odd percent. There again, there is a huge scope for improvement in the non auto space. So that itself is a significant will be a significant driver globally for MMFL.

29:08 This roughly we are headed for about INR600 crores of exports on an annualized basis. I would say there is a by end of the decade, yes, we should be looking at 1,200 crores to 1,500 crores of exports. There is a huge potential in the export market and while we've been caught up with the domestic market, there is a we have to get our act in the export market, which we will and we are doing. So exports will offer exports of heavy forgings exports of overall forgings will constitute a driver in the months to come. Yes. And next question, please.

29:59 Thank you. The next question is from the line of Igneesh Ayar from Sequent Investments. Please go ahead. Hello. Hi. Am I audible? Hello. Yeah. You are. Hi. Yeah. Just one data point that wanted to know, how how much CapEx have we spent on the regular plus maintenance CapEx in the first half, h one, and what is the amount that we plan to spend in second half? We spent 70 INR 65 crores in the first half, and we are planning another INR 75 crores to 80 crores in the second half.

30:53 So taking the total to about INR 150 crores. Okay. Okay. And so just considering around INR 150 crores that had spent into CapEx and the higher working capital requirement that we may have with higher you know, volumes that we are targeting for the second half, what would be, like, the peak that we are looking at on closing level of net net we can, you know, see for the company by end of this year? Overall, debt levels should be at the same level as current, which is about INR 1,200 odd crores overall.

31:40 And if you remove cash on hand, somewhere in the region of INR1000 crores to INR70 crores our overall debt level, INR1020 crores to INR1070 crores, it should remain in those things. Because also what will happen is internal accruals will be there, right, higher internal accruals because of higher volume. Whereas we are pegging our CapEx and whatever we spend mostly will come out of term loans, but we'll repay the same extent. So on long term use, it will be neutral. Okay. And what is our... And what is our average cost on debt as of now? Sorry, can you repeat?

32:26 What is our average cost of debt? I mean, 9%, 8.5%, 9%? Six point something, 6.3%. One second, guess, 6.3%. Is 6.3% or cost of 5.42% is our average cost of debt. Okay. Okay. Okay. Okay. That sounds good. Come down from eight and a half percent. Right. Okay. Right. Right. Thank you. Thank you. The next question is from the line of Lakshmi Narayan from Tunga Investments.

33:25 Please go ahead. Sir, thanks again. I have couple of questions. See, as you scale, I mean, I believe the execution in this on four pillars. One is expanding the leadership bandwidth. Second, fortifying the core. Third, deepening your competitive moats. And fourth, enhancing earnings predictability. I'd like to understand what have been the tangible progress across these four vectors over the last few years because you made a point that you have changed certain parts of the business, and that's where the flywheel growth is taking place. So want to understand on these four things, I just repeat leadership bandwidth, strengthening the core, deepening the competitive modes and enhancing earnings predictability or revenue predictability.

34:18 What steps have the management taken in the last few years on this? Management, ma'am, we cannot hear you cannot hear you. Oh, sorry. Sorry. I was on mute. My bad. Let me... The question that requires a long answer, but let me try to run it run it through in in a in a gist. So leadership, we have added quite a few people at the at the top level within the organization. We have promoted them in charge of business heads as business heads responsible for various aspects such as forging, concentrated machine shops, which are large or a bunch of machine shops.

35:17 So these leaders are emerging. They're finding their place and moving things. We've also strengthened our finance team. We are looking to expand our internal audit as we move on, so that newer and existing processes will be the adherence will improve and sustain. So strengthening the core internal audit plus a considerable focus on TPM will strengthen the core. Competitive advantage will improve by looking at costs overall, driving numbers, utilization of assets, which we have done significantly in the last six months. We've looked at every line mapped out what is it that we are missing, where is it that we are not growing, why aren't we not fulfilling our capacities there, what is our bottleneck and we're driving those numbers, those factors that result in better numbers.

36:20 Enhancing predictability is a long term task relative to the first three MMFLings because we are quite CV dependent. We will have to wean ourselves away from CV over a period of time, not wean away, but at least strengthen our non CV percent, I put it that way, which we have started, which is why I'm saying that a significant amount of growth will come in exports. One other way to look at the CV market is also this. We are predominantly we are overall 85% dependent on auto, 70 odd percent... Yeah. 70% on CVs globally. Give or take a percentage or two between India and rest of the world. But if we diversify our CV presence across geographies and grow the CV presence in especially heavy parts outside of India, that would also mean a certain amount of enhancing the predictability of the business. So we are not stuck to the cycle of one economy.

37:23 We'll be stuck to three or four geographies, which will be pretty diversified. Of course, each of these cycles come together or dim together at the same time, that is there for any organization. So one thing is to look at non CV, non auto, which we are, we have started. The other is to diversify CV across geographies. So increase our heavy forgings across particularly outside of India. Both of these actions have been commenced. It will take some time to pan out, but not infinite time. Over the next two to three years, we should see results in improving our predictability. Basically, predictability means flattening out and saying that, you know, if one geography performs less, I should be able to compensate for it with other geographies or other industries, other segments, So we've embarked on these two journeys on this journey. It will yield results in the next two years.

38:27 Got it. Sir, and we have multiple manufacturing locations and we also acquired DBS in a couple of years back. Have the managed... Manufacturing systems are homogenized across all your locations that they track the same thing, way in which they they vocabulary things are all same or still, you will be blunt, brutal answer. Okay. Thank you. And two questions more. I just want to understand a couple of quarters back you talked about there is a movement towards tractor trailer that is leading to a pressure in growth because we were tuned to multi axle trucks?

39:21 And how that has passed or how that trend is shaping up? And the second question is related to Abhinavar as well. And what has been the traction and growth outside the core Forgings? If you can just elaborate on these two, you take. Yes. We move towards multi axle vehicles. Kind of shall I say, hit the sink and we are seeing multi axle vehicles back in the game, kind of a block, and we are seeing an increase in multi axle vehicles coming in. The front axle numbers to vehicles at most OEs has gone up.

40:13 That's number one. Abhinavar Aizal, I'm happy to say, actually I should have said that in the opening remarks itself, we missed it out, has opened its account. We started selling 300,400 motors a month from July onwards. Again, you should have added it in our opening remarks. So there, thank you, Rishini, for pointing it out, very important facet of our organization. This, we expect to grow to about 3,000 to 4,000 motors over the next few years on a monthly basis. And good news is it has opened its account.

40:59 Meaning, same. Okay. And what kind of investments you think would need more towards this particular business? If you were doing some, for lack of better words, some trial and error because certain things were not finding its way to the market. Now that is strengthened, now that is approved that it is actually there's an offtake, do you intend to add capacity or add capital to this? And if so, what is the plan you have the company has for the next couple of years? To realize between 2,000 to 4,000 motors per month is our first visible tangible goal with existing technology.

41:53 That would require about INR 15 crores to 20 crores at best here and there over the next few months. We have started the journey. We are investing. We are chip chopping in terms of wherever there are capacity bottlenecks and process improvements. Maybe about INR 10 crores, maybe itself enough, I'm saying INR 20 crores at best. The next jump for AR would come, we are looking actively at an international at some international partnership, discussing with quite a few players. Those come in, then ARPL could go into the big league of making three in one, five in one, seven in one systems for largely the pass car market.

42:41 Those brakes can be huge brakes. The revenue from each of those could be running into hundreds of crores, at least a couple of 100 crores. We are working on that side as well. So one is homegrown tech, the other is bought out tech, if I can use the word. Because the Chinese, as far as pass cars are concerned, are miles ahead of the rest of the world. And their electronics manufacturing is well known. So we are looking at a few sources there. We need to make things happen. The line for the participant has dropped. The next question is from the line of from CD Research.

43:38 Please go ahead. Hi, sir. Good afternoon. Why has the company been so slow to capitalize assets? And why has there been a delay of 16,500 tonnes? And how much is the cost escalation, if any? I'm happy to say first, there are no cost escalations other than possibly interest. This is also a significant cost itself, first thing first. Second, the delay of about six to eight months is because the foundation required big plates that needed to be welded and brought in. The execution of that from the vendor took more time than anticipated.

44:30 These are the two reasons why the reason why the press commissioning and installation got shifted out a little bit. Mhmm. So why why didn't we take any short term division capital project when there were so much pressures on, you know, our return on capital and leverage, which is now close to one. Sorry. I didn't understand the question. So I I said that you could have taken some short short duration capital project because there's so much pressure on our return on capital and leverage, which is now close to one. See, most of our products require validation at customer end. Customers have come up with with requirements.

45:16 So all those things, we have been working with customers. Some places we missed out on installation itself. In some places having installed on time and sampled and approved on time, customer projects got shifted out. One PV customer is a case in point. So we are working with customers across all these fronts and these delays have been largely out of our hands. One or two projects company is also internal reasons alone were there. Good news is that we are... It's now behind us, but the learning stays that we need to be far more nimbler in execution, and we are focused a lot on it. Okay. Okay. And how much, like, can you afford to build any capitalization of assets at a time when your balance sheet is not in a good shape with mounting that can even pressure on ROC?

46:18 If you see current numbers, I would not say that our numbers are balance sheet is not in good shape. And we are capitalizing assets as we speak. Yeah. But I see in the past three years, if I take the past three years figures, we have close to spent almost close to INR800 crores, but we have capitalized only INR380 crores. And in the... So there's a lot... There's a big amount that is still sitting in the Yeah. Correct. The the the... 3,510 crores itself is 240 crores, That line itself. So that remains as a big chunk. Okay. No. Because the... Because we have we have taken pressure on the ROT. Right? It's, like, the average of the past three years have been close to 10%.

47:07 So don't you think that it's a reason to worry? I would have been concerned had we stayed put at previous levels this year also. But now that we've come out of the so called rut that we were two years back, and we started delivering across all sectors, I would say that that concern is largely non extent. Okay. Understood. Understood. Thank you. Thank you, sir. The next question is from the line of Lakshmi Narayan from Tonga Investments. Sorry, my line got disconnected earlier.

48:05 One question I had is that while we track the overall strip across machine components and end markets, could you help us understand which product specific product families such as front axle beams or knuckles or crankshafts, where which form your core leadership stronghold? And roughly, what percentage of revenue that contribute today from your strong product segments? And what levers you are pulling to deepen this competitive edge on those products where either from the product acceptability or cost competitiveness or capability, we are pretty heads and shoulders above the rest of the market. We sell those products and what percentage of revenues broadly contributes, and what are we doing to continuously enhance our competitiveness in those products.

49:08 The bulk of our production comes from five product groups. What we used to call three as ABC, Axle Arm, Beam and Crank. And then we've added two more, Conrod and Spindle. These constitute a good portion of our revenues. So these we are pushing across all sectors, all customers, mapping out our capacities versus demand and debottlenecking the capacities wherever required with very, very minor CapEx or process tweaks, sometimes even mining machines, all those gaps have been identified and they are being plugged.

50:00 These parts constitute more than 50%, I would say close to 6055% of the revenue of the company. The first three constitute 44% of our sales and the latter two would easily be in the region of around 10% more. So these parts together will be more than 55% of MMFL. We are focused on these are not and also many other product families are there. But these five today are the biggest families. Got it. What are we doing to ensure that we continue to expand our leadership in these products? Because I believe we are also much better than the rest of the other industry players, right? So while they are dominant for you and these are these, I believe, may also be something where Forgings is way above the rest.

51:04 So what are you doing to ensure this company? We're investing crankshaft lines to take our crankshaft capacities up. We're investing in beamlines and also knuckles. So across the board, we are doing a significant amount of activity across these major platforms. Plus, the intended growth or planned growth in export markets across the ABC parts export markets particularly, that also will add to competencies will also result in realization of competencies that have been created in the last five, seven years. The next question is from the line of Ashish from LEO Capital.

52:13 Ashish, we cannot hear you. Hi. Sorry. In one of the old phone calls, had alluded to a HPP Genset order, which we might be receiving. Is the heavy press a gating capability for that? It is also one of the factors there. What is the other factors which helped us win this order? There are also parts that go into smaller equipment. So the parts are not just restricted to the heavy... Heavier process. Parts are are also across smaller presses as well. But would it be correct to understand that heavy presses opens up a new non auto segment for us? Absolutely right.

52:59 But why is this, sir? Is non auto have have higher weight classes of ABCs? I mean, products? No. Non... It opens up a new class of non auto. Fine. That's the correct and I said yes to that question. Whether it has a higher concentration of ABC parts, I would say no. The volumes there are not comparable to auto volumes, CV or PV by any stretch. But however, it does open up a new avenue because the parts that can be produced in the heavier press do not find use in the auto parts... Auto sector in touch or car.

53:51 So I'm asking the reason. Like, what is difference between a non auto part and an auto part? Parts are similar, but the non auto has applications which are much heavier than auto. That's the point I'm trying to make. I don't think I was clear. Your question is clarified a little bit. So non auto has one component or one portion of it is within the weight range and capability of auto parts similar. The other is beyond the weight range. That market gets addressed with bigger equipment. Got it. Got it. Thank you so much, sir, and best of luck.

54:38 Thank you. Thank you. Ladies and gentlemen, that was the last question for the day. I would now like to hand the conference over to the management for the closing comments. Thank you all for the interesting questions as always. Every time I'm really surprised by the quality of questions, which have gone up over the last few years. And within the previous call and one too, I see a total difference in the qualitative nature of the questions, which are more insensitive. And I would honestly admit that I do get insights, more insights into the business. At least it's exciting for me to see that being challenged to look at the business from various angles.

55:27 It does provide a better view of the business as we go back and do our homework. So thank you all for your answers and questions. We at Forgings are pretty strong of looking at INR 2,000 crore mark this year and challenging the INR 2,500 crore mark in the next fiscal. On behalf of three sixty one Capital Markets Limited, that concludes this conference. Thank you for joining us, and now you may disconnect your lines.

Follow MM Forgings Limited into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from MM Forgings Limited