Replay available

Kulicke and Soffa Industries (NASDAQ:KLIC) Q2 2022 Earnings Call

Kulicke and Soffa Industries (NASDAQ:KLIC) Q2 2022 earnings call, held 2022-05-05. Watch the replay and read the transcript on 6ix.

Thu, May 5, 2022 at 8:00 AMendedReplay
Kulicke and Soffa Industries (NASDAQ:KLIC) Q2 2022 Earnings Call
Company
Kulicke and Soffa Industries, Inc. (NASDAQ:KLIC)
Period
Q2 2022 earnings call
Date
Thu, May 5, 2022, 8:00 AM ET
Replay
Watch the replay on this page · 53 min
Results news release
Kulicke & Soffa Reports Second Quarter 2022 Results · Wed, May 4, 2022

On 6ix: 6ix.com/event/kulicke-and-soffa-industries-inc-klic-q2-2022-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Hello, and welcome to the Kulik and Soffa second quarter results conference call. At this time, all participants are in a listen-only mode. A question and answer session will follow the formal presentation. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. As a reminder, this conference is being recorded. It's now my pleasure to turn the call over to Joseph Elgindy, Senior Director of Investor Relations for Kulik and Soffa. Please go ahead.

0:28 Thank you. Welcome everyone to Kewlick and Soffa's fiscal second quarter 2022 conference call. Joining us on today's call, we have Fusen Chen, President and Chief Executive Officer, and Lester Wong, Chief Financial Officer. For those of you who have not received a copy of today's results, the release as well as our supplemental earnings presentation are both available in the investor relations section of our website at investor.kns.com. In addition to historical statements, today's remarks will contain statements relating to future events and our future results. These statements are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Our actual results and financial condition may differ materially from what is indicated in those forward-looking statements. For complete discussion of the risks associated with Kulik and Soffa that could affect our future results and financial condition, please refer to our recent SEC filings specifically the 10K for the year ended October 2nd, 2021 and the 8K filed yesterday. With that said, I would now like to turn the call over to Fusen Chen for the business overview.

1:35 Please go ahead, Fusen.

1:38 Thank you, Joe. We continue to make significant progress toward our long-term target and remain well positioned to support significant and fundamental transition occurring within the automotive, semiconductor, and advanced discipline markets. I will provide a brief update to each shortly. In parallel, industry growth through calendar year 2022 is still anticipated to remain well above average, creating ongoing need for capacity expansion across our self-markets. We continue to be in a multi-year industry expansion period, which is consistent with the market assumptions shared at our investor day last September. Before discussing our business performance, I would like to provide our perspective on the Russia-Ukraine war and the COVID-related shutdown.

2:30 At this point in time, we do not anticipate this event will materially impact our outlook and would like to provide some additional context. First, I would like to address the humanitarian crisis and express our concern and compassion for a prompt resolution of the Russia-Ukraine war. We do not expect Canada's war to have any meaningful direct operational or demand impact due to this conflict. For the broader semiconductor industry, material and commodity costs for items such as normal gases may increase a lot. We do not anticipate this to be a major concern to our business. Secondly, we wanted to also provide an update related to Shanghai COVID lockdown. Our consumer work facility in Suzhou, China, where we produce capillary and hub blades, continues to be fully operational.

3:28 Logistics challenges increase temporarily, but our production and supply chain team proactively identify alternative routes, mitigating the impact. To iterate, we do not anticipate either of these recent events to significantly impact our outlook. and we remain focused to continue proactively managing our own supply chain risk very closely, as we have successfully demonstrated over the past two years. Overall, the industry remains very resilient and has overcome many obstacles over the past two years. We believe the prolonged state of industry supply chain challenge is shifting production strategy from a just-in-time approach to a more prudent and long-term inventory management and capital equipment planning approach.

4:25 Moving on to our March quarter performance, we continue to make meaningful progress toward a specific opportunity, all night during our investor day. Customer engagements are proceeding as anticipated, and we remain well positioned to actively support several megatrends impacting the automotive, semiconductor, and advanced display market over the coming years. Our near-term ability to develop, quantify, and recognize revenue on our growing portfolio of solutions will help solidify our long-term strategy and position within this key market. I will briefly explain each.

5:11 First, within automotive, semiconductor capacity and the battery assembly needs are anticipated to continue growing above average as the transition to the electric vehicle and autonomous driving continues to accelerate. We have a dominant leadership position within the automotive segment itself. and continue to expand our offering and increase customer engagement. Currently, we are aggressively preparing our next-generation laser-based battery assembly solution for qualification and acceptance over the coming quarters. In addition to this new system, we are also very engaged in driving acceptance and modeling the base of our proven weight-bounding battery solution to a variety of new customers.

6:04 Secondly, within the semiconductor space, we continue to broaden our portfolio and further increase alignment to the market's renewed focus on assembly. The growing complexity of semiconductor assembly for both the leading edge and the high-volume market is creating several new technology-driven opportunities and enhancing our long-term growth prospects. Our primary focus is to develop a new capital equipment solution. As assembly becomes more complex, production challenges increase, driving the need for closed-loop feedback and a better process and production control. Last month, we announced a partnership with PDF Solutions to provide customers with a new analytic platform that leverages comprehensive real-time data available within our leading assembly system with artificial intelligence and machine learning capability.

7:04 Ultimately, we anticipate this partnership will directly add value to customers by enabling efficiency and throughput enhancement for both high-volume and leading-edge semiconductor production. Additionally, more complex assembly represents a significant paradigm shift for an industry that historically relied heavily on no-shrink. This shifting paradigm is increasing the technology-driven growth rate within both high-volume and leading-edge semiconductor applications. Going demand for multi-type packages, new shielding requirements, and new memory opportunities are expanding our core market prospects and creating the need for additional features and capabilities for advanced wire bonding.

7:52 In parallel, we are also gaining shares in leading-edge and optical markets. During the March quarter, we recognized revenue on seven PCB systems, supporting next-generation interconnects for mobile applications, processors, and high-performance computing. Our PCB order book continues to increase. As we highlighted last quarter, the adoption of thermal compression is occurring within both OSAT and the IDMs, and we continue to pursue both customer groups with a major focus on mobility, sensing, silicon photonics, and heterogeneous applications. We also remain very focused on our fluxless thermal compression solution and recently received a purchase order for several systems, which will ship later this year. Our capabilities of fluxless PCB are very unique and provide an efficient and capable solution for high-performance triplet integration.

8:58 This recent purchase order includes our alignment with long-term cloud spending and the triplet trend. Finally, in addition to the evolving semiconductor assembly market, our opportunity in advanced display continues to expand. We remain extremely committed and we are actively enhancing our leadership in both mini and micro LED applications. Our advanced display engagement and efforts continue to revolve around three areas. New-term capacity expansion for PISOLUX, new engagement and the qualification for our recently introduced Luminex system, and the long-term ongoing development for next-generation display assembly solution.

9:46 During the March quarter, we shipped two Luminex systems for qualification to separate customers, and recently also received two purchase orders for initial Luminex systems. These systems address different process steps at different customer sizes and represent a significant milestone in our advanced discrete business. We remain optimistic on our advanced LOD opportunities. and look forward to providing an update to our long-term target over the coming quarters. In addition to our growing market access, we continue to improve margins and drive strong operational cash flow at the current level of business.

10:31 During March quarter, we achieved $384.3 million of revenue and a non-GAAP EPS of $1.95. Within capital equipment, we generated $333.9 million of revenue. End market conditions come in largely as expected. The sequential change driven by general semiconductor was largely related to our ability to surge production aggressively in support of customers' expansion plans in September and December quarters. Additionally, we continue to see supply chain constraints and Global Logistics Challenges limiting the pace of growth throughout the electronic space.

11:16 As a reminder, we still anticipate semiconductor growth to remain above average into fiscal 2023, which is also a view shared by a major third-party forecaster. Despite 2022 still being an extremely strong semiconductor growth year, will be relatively lower than the dramatic growth experienced last year. Excess industry capacity in early 2021 provided headroom to enable last year's aggressive growth. However, at the start of 2022, this excess capacity was no longer available, which created a shortage and additional supply chain headwind, and is now extending the global chip shortage.

12:07 To highlight this relationship, the majority of high-volume systems will ship in March quarters or related to new FAP capacity that has only recently come online. This reinforces our view that broad industry supply chain challenges should begin to resolve as wafer capacity growth improves later this year. Within our business, product mix is evolving, which is reducing our reliance on industry capacity expansion and better align our business with technology and secure growth opportunities in many of our end markets. This was clearly outlined during our investor day and I will provide a few examples that highlight this transition.

12:58 Within General Semiconductor, our thermal compression sales have doubled and our wafer-labeled bonding systems have tripled. in revenue sequentially. Within the wire bonding market, we are experiencing an ongoing increase in demand for complex multi-die wire bonded package in high volume consumer market and are also seeing an ongoing ramp in wire bonding to improve shielding requirement for 5G applications. Later this year, We anticipate customers to start wire bonding assembly for applications at 6nm technology nodes. Again, these trends are increasing the rate of future capacity and also technology needs across our semiconductor offer.

13:50 With LED, advanced display systems have remained consistent and represent 88% of LED sales in March quarter. At this point, We are already approaching our fiscal year revenue target of $80 million and expect to reach the target ahead of schedule. Within automotive, demand has increased dramatically and is expected to remain above average over the coming years due to the growing demand of electric and autonomous vehicles. In addition to high-growth markets like battery assembly, We also provide high-reliability IC and power semiconductor solutions, which are essential to this technology-driven tech change and the broader automotive industry.

14:41 Finally, within memory, we are experiencing ongoing demand for our high-performance, market-leading LAN assembly system. We are also working to develop a new cost-effective solution for stacked DRAMs, leveraging our wafer-label packaging capabilities. From an end-market standpoint, we anticipate memory, automotive, and LED to remain strong. Additionally, the 5G transition and the need for more complex assembly continue to provide long-term tailwind to our core business. We continue to anticipate wafer capacity growth will improve in the second calendar half through 2024, which will ease industry supply chain challenges and will provide additional visibility to our outlook.

15:31 In summary, our progress on new growth initiatives and customer engagement remain on track. We are expanding position across several new markets while also actively participating in a fundamental transition within our core market. With growth, long-term development engagement with industry leaders, we have developed several high competitive systems and our position to win new qualifications across the advanced packaging. Our ability to succeed near-term can provide significant upside to our long-term outlook and target. We look forward to demonstrating this progress over the coming quarters.

16:17 With that said, I will now turn the call over to Lester who will discuss our financial performance. Lester. Thank you, Fusen.

16:26 My remarks today will refer to GAAP results unless noted. As Fusen mentioned, during the March quarter, we continue to enhance our fundamentals and growth prospects by executing on internal development goals, driving external partnerships, and returning value directly to shareholders through our increased dividend and aggressive repurchase activities. We believe our business and cash generation potential have improved in a consistent and sustainable way due to our ongoing strategic execution and participation in long-term technology transitions, Fusen outlined. In addition, we continue to make progress to achieve our long-term financial targets. During the March quarter, we generated revenue of $384.3 million and very strong gross margins of 52.5%, up over 400 basis points sequentially.

17:22 This strong gross margin performance highlights our consistent operational efficiency and improving product mix, which includes an accounting true-up related to a long-term and ongoing customer project. Without this true-up, gross margin would have been just above 51% in line with our long-term targets. Non-GAAP operating expenses came in at $66.8 million during the March quarter, and some of our SG&A plans were reprioritized, delaying spending to the June quarter. Tax expense for the quarter came in at $13.7 million and we anticipate an effective tax rate of around 13% for the full fiscal year.

18:07 Non-GAAP net income came in $121.5 million, driving $1.95 of non-GAAP EPS during the March quarter. significantly above expectations due to stronger gross margins and lower expenses. Turning to the balance sheet, days of accounts receivable increased slightly from 84 to 86 days, days of inventory increased from 75 to 104 days, and days of accounts payable decreased from 56 to 49 days. During the March quarter, we generated free cash flows of $69.8 million, and ended the quarter with a net cash balance of $415.6 million. In early March, we expanded the share repurchase authorization by $400 million and extended the timing through August 2025.

18:59 Shortly after this announcement, we entered into a $150 million accelerated share repurchase program, which allowed us to immediately reduce share count by an initial 2.5 million shares equivalent to nearly 4% of shares outstanding. This accelerated program has completed in late April. At this point, we have $340 million remaining on the repurchase authorization, and we intend to resume open market purchasing opportunistically. This remaining balance equates to over 10% of the company's current market value. Our competitive dividend yield and ongoing opportunistic repurchase activity continue to provide additional paths beyond our fundamental growth prospects to create and deliver value to shareholders.

19:49 For the June quarter, we expect demand to remain stable and anticipate approximately $365 million of revenue, plus or minus $20 million, which includes a risk adjustment that considers our current view on COVID-related closures For the June quarter, we anticipate gross margins to remain strong at 49% plus or minus 50 basis points due to product mix and absence of the one-time true-up. Non-GAAP operating expenses is anticipated to be approximately $74 million plus or minus 2% and non-GAAP EPS to be $1.53 plus or minus 10%. We are very focused on supporting this ongoing period of industry expansion and are extremely focused to drive new engagements, qualifications, and ultimately ramp production of our new advanced packaging, automotive, and advanced display solutions.

20:50 Execution on our development and qualification goals throughout fiscal 2022 can potentially drive upside to the long-term targets shared during our investor day. This continues to be a very exciting period in the company's history. Over the past few years, our core business and growth prospects have fundamentally improved, and we are aggressively executing on the multifaceted growth strategy outlined last September. We look forward to sharing additional information regarding these new opportunities over the coming quarters. This concludes our prepared comments. Operator, please open the call for questions. Thank you. We'll now be conducting a question and answer session. If you'd like to be placed into question queue, Please press star 1 on your telephone keypad. A confirmation tone will indicate your line is in the question queue.

21:40 You may press star 2 if you'd like to remove your question from the queue. The participants using speaker equipment may be necessary to pick up your handset before pressing star 1. One moment, please, while we poll for questions. Our first question today is coming from Craig Ellis from B. Reilly. Your line is now live.

22:00 Yeah, thanks for taking the question, and guys, congratulations on the very strong strategic initiative execution. First, two product-related questions. First, on the Lumilex side, can you give us some color on whether the orders you're receiving are for R&D-related use, or are those production tools, and can you give us some indication on order size? And then on the NAND side, is it your sense that the demand for NAND is additional layer count work that customers are doing, or is it capacity, or both?

22:34 So, Craig, our first generation is Luminex, is a piece of locks, and Luminex is a second system, is a laser base, and provide much higher productivity. So I think this is really a huge market. In the meantime, customers need to have a higher productivity. That's why we introduced this system. So to answer your first questions, We actually ship, you know, we're already in a three-side for qualification. Normally, qualification will take about six to nine months to finish it, or sometimes take a little bit longer, really depends on complication in the customer side. So after that, I think if we're successful, it will be a high-volume order.

23:19 So actually, luminance are at the initial stage for qualification. We have a three-qualification side, and the order actually... probably is also actually will be shipped and also need to be qualified. So at this stage, I think many customers are waiting for our system for qualification. And hopefully, after qualification, we will see higher growth of our revenue related to Luminex, probably second half of 23. So that's our view. So if I missed any other questions? No.

23:59 Yeah. So one, following up in the NAND drivers for strength is that layer account work for customers or capacity ads. And then on the financial side, Lester, can you just comment on two items? One, what drove the upside to gross margin, excluding that true up that you mentioned? And in the past, I think the company identified potential for 1.58 billion in revenues this year. What's the company's view on revenue potential this year versus what it expressed three months ago? Thanks, team.

24:36 So I think your question about NAND, right? Stack NAND? Yeah. Okay. So actually my, you know, Stack NAND, we have absolutely, you know, leadership position, you know, dominant position. and we see actually NAND grows nicely. In my script, actually I mentioned about StackDRAM. So the StackDRAM actually, the process for connection between a StackDRAM was to use a TSV, right? So in this case, we are working with a leading customer, try to actually replace a TSV by vertical wire provided by our actually, you know, process waiver label packaging stop bumping process. So to reduce the cost and also footprint, you know, all the form factor of TSV. So that was my remark in this question. Oh, got it. Okay, thank you.

25:39 Hi, Craig. So as far as the gross margin upside, yeah, besides the one-time accounting true-up, I think the upside was... Again, as we talked about many times before, it's a lot depending on product mix. So I think both in the ball bonder business unit, we sold less LED bonders and more higher power computing bonders, which gave us better margins. That's also true in wedge bonder. We also sold the higher margin product in wedge bonder for power management. and then also for this quarter, the split between capital and equipment APS. APS actually was a little bit higher percentage this quarter and APS, as you know, has a higher margin. And finally, besides product mix, what affects the gross margin is customer mix.

26:29 So our customer mix shifted a little bit more to the IDMs versus the OSATs, which generally also give us a slightly higher margin. So all those factors together in addition to the one-time accounting true-up gave us a very strong over 52% gross margin.

26:45 Excellent. And then finally, on the full-year revenue view, Lester?

26:49 Yes. So, Craig, you know, at this moment, actually, although we still see some shortage, some a little bit headwind for industry, Like a shortage in the material, mainly as a component, IC and the wafer capacity. Also COVID related challenge caused some logistics and a shutdown in the customer side. But we also still seen a wafer capacity or increase in the second half of 2022, you know, this year. So at this moment, the end market demand remains very strong. So it's our view, we still think 1.58 actually is achievable, attainable at this moment.

27:38 Thanks, guys. Thank you. Our next question is coming from Tom Diffley from D.A. Davis City. Your line is now live.

27:46 Yes, good morning. Thanks for the question. So, Fusen, just following up on your last comment, what is your expectation for industry unit growth and perhaps if you can quantify the way for capacity growth you see for this year as well? and how it compares to a normal or typical year.

28:06 This year, actually, I think it's less than last year. So we actually already put into our forecast. So it's our view probably waiver capacity will increase a little bit more because we only have, our year actually finished in September, right? So we probably only have initial three months to probably enjoy if it comes up additional wafer capacity. So actually, our view of unit count does not change from beginning of the year. But it's significantly lower than last year. I think last year was much higher than 10%. So this year is no more years.

28:54 Okay, and I think you made a comment earlier that you thought that the wafer growth, you could see it going through 2024. Does that portend, I guess, then for a pretty strong unit growth over the next couple years as well?

29:11 Yeah, I think that's a third-party view also. I think the next few years, the unit count, I think normal for us probably is above 6%, maybe 6% to 8%.

29:25 Okay, great. And then a lot of the equipment guys are seeing fairly mixed business between the leading edge wafer growth capacity and the trailing edge. From your point of view, is there one of those that's a particularly better driver? I know historically the trailing edge has been a better driver of wire bonding, but since you have so many projects now near the leading edge, I was curious if that also is going to be a fairly nice driver for you for the next few years.

29:57 Well, I think in my remark, I mentioned, you know, this quarter, the majority of our bundle actually go to the fab, just, you know, finish, you know, our construction, right? So I think both, you know, leading edge and, you know, no more like IoT, you know, all these devices, both capacity will expand. Of course, at this moment, I think, you know, because front-end capacity need to take a much longer time to prepare, right? So I think probably investment a little bit heavy, but at this moment, I think both the backend and the front-end wafer advance and the normal wafer, actually both capacity will increase in a second half.

30:49 Okay, great. And then finally, Can you talk a little bit about your partnership with PDF Solutions and the creation of the closed-loop assembly solution? How does that, do you think, impact revenue going forward? Are you going to be able to create some recurring revenue streams just from the data flow, or how do you view that longer term?

31:10 Right. So I think at this moment, the real-time monitoring, you know, all the information convert, you know, become a closed-loop is very important because of the process and everything getting more complex. So a partnership, we do believe, is to add value to our customers in terms of efficiency, throughput, and the year analysis. So I think at the first one or two years, later on, after we get enough experience, we probably will have our APS revenue. That's our view.

31:45 Okay. Thank you for your time today. Thank you. Thank you. Next question is coming from Krish Sankar from Cowan & Company. Your line is now live.

31:54 Hi. Thanks for taking my question. I have a few of them. First one, can you guys tell what the wire bonder lead times are today?

32:04 Yeah. So, Krish, I think wire bonder lead time is about four and a half months.

32:11 Four and a half months. Got it. Got it. Okay. And then I think if I remember right, I think Fusen, you kind of I understand there's a lot of capacity constraints, etc., but you feel okay with the $1.58 billion number for this year. I'm just kind of curious, at what point do you think some of these growth initiatives like the auto, advanced, etc., will start offsetting your legacy wire border, or is that way down the road?

32:45 Okay, so question, maybe I answer, maybe not from a Lama point of view, right? As you know, Bo Bangda actually is a big business and used to be very cyclical. But in my view, actually, I think what we try to do is make sure the Bo Bangda, we have leadership position and also ensure Bo Bangda grow on top of a new initiative we have, right? So actually, overall, I am quite bullish about the future of the ball-bounder. So let me give you an example. I think the whole world, the ball-bounder represents about 65% of the market share for total IC packaging solutions.

33:32 So whatever capacity increases in the world, it can be high-end, can be mid-end, can be low-end devices. The ball-bounder actually represents 65% of the market share to packaging, you know, you know, overall of all these ICs. And so, I think broadband demand will continue to grow. Actually, because of, in addition to yearly semiconductor unit growth, we see the broadband continue to find new applications to grow. I'll give you a few examples. I think we talk about the multi-die. This multi-die, actually provide interconnect, not only between a dye to substrate, but also between a dye to dye.

34:20 So because of this, it's also kind of advanced packaging. You put a different kind of tube lab. Maybe it's not advanced tube lab. But actually, increase actually transistor density. So increase actually also the capital intensity. So we really see the growth of this multi-die. The second application I am telling you is we are entering 5G erode. And they are multi-die actually in a package. Between a die-to-die, there may be a different kind of bandwidth, different kind of noise will interfere to each other. So, you know, industries start to use our ball bounder actually to build a vertical wire.

35:10 become friends along the die and to prevent interference and also reduce noise between each other. So we see this area also growing and Bo Wangde received this application. The third one I think we just mentioned, the TSV alone is very mature but very high cost and we are working with an industry leader in DRAM and try to use our stop-bombing solution. The vertical wire actually connects are between stagnant instead of TLCV. And later this year, people start to use a bow-bounder for 600 nanometer. So what I try to say is a low, the bow-bounder is cyclical, and so is industry. And what we believe is bow-bounder will continue to grow, and every cycle, high and low, will become higher for the next cycle.

36:07 So in the meantime, we try to speed up Our new initiative, as soon as possible, to push your Luminex and also grow advanced packaging. And APS, every year we grow it. So I think to answer your question, bottom line, we are seeing maybe second of half or 23. All these new initiatives will become much meaningful to offset the cyclical of Bo Bangde. But in the meantime, I think we are bullish on Bo Bangde. I think the cycle will take longer right now. because industry is more mature, and the bull bounder starts to still continue other than the unit grows, you know, need additional capacity, also have additional growth in the area, like I mentioned, you know, the multi-die and also shielding requirement and also other application in the memory.

37:00 Got it, got it. Very helpful, Susan. Then the last question, in the past you mentioned TCB, thermal compression bonded revenues, could be around 40 million and 522 and 80 million at 522. Is that still a good number to use?

37:14 Yeah, yeah. Yeah, yeah, yeah. Actually, we are quite bullish on our TCB. And TCB, actually, we have a full market, right? We focus on mobile. We also focus on, you know, heterogeneous integration. And also, I think in the CMOS imaging sensor, and also heterogeneous integration. And all these four applications actually will grow nicely. So I think our goal right now is higher than originally we showed during our investor day. I think also fractalase, maybe I mentioned a little bit about fractalase.

37:59 We believe that TCV will continue to grow strongly. But one of our concern about TCV is the flux, coastal contamination. that will not be able to extend to very fine pitch like below 20 microns. But all fluxless capability is a very unique process. Can actually provide very clean copper to copper surface. And we believe it's extendable almost to like a 15 micron space. So we actually already have a customer in the mobile, also in a CMOS imaging sensor, silicon photonics, for optical transceiver and also heterogeneity integration. So I think 2023, next year, we actually aiming close to $100 million.

38:55 I think the numbers should be what we show to investors today, right? But we do believe TCB provide very significant growth opportunity for us, for convenience. Got it, got it.

39:07 Thank you very much, Fusen. Thanks, Lester. Thank you. As a reminder, that's star one to be placed into question Q. Our next question is coming from Christian Schwab from Craig Hallam. Your line is now live.

39:23 Hey, good morning, guys. Great quarter. Just a couple quick questions that haven't been asked. As we ramp the Luminix, should we expect that gross margins to be in line with the corporate average, or is that going to be slightly better or slightly worse?

39:41 Hi, Christian. It's Lester. We expect Luminix, again, as we said previously, because it is an advanced display, one of our more advanced products, we believe that it will be higher than Luminix. In terms of a little bit higher than the corporate margin, we think it's going to be one of our higher margin products because we believe it's going to be one of the leading products in the space. And also, I think there's great demand for the product in mini and micro LED.

40:09 Perfect. And then can you remind us, I know you guys talked about this being a substantial market opportunity years ago by your bonding business. Given the acceleration and adoption of video micro LED and your dialogue, can you give us a three to four year path about how big you think that business could be again?

40:36 So if you remember, I think 2021 is the first year we entered this high-volume production. In 2021, we got $80 million. We achieved it. This year, we also got about $80 million, $80 million to $100 million. We believe this year we will end close to a high end, close to between $80 million to $100 million, plus close to a high sign. And next year, I think we will have both revenue from Peaceloft and Luminex, But our goal is that Luminex, I think, should be much higher in the future. But because we are still in a qualification stage, the qualification can take a long time.

41:27 But we are quite bullish. Qualification should do very well. So second half of 2023, we should have some meaningful revenue from Luminex. So we expect 100 and more. And after that, I think it can grow much, much faster. So we will probably share more detail in the next few quarters when we have more detailed information.

41:53 Okay, great. Thank you for that clarity. And then as it relates to the aggressive buyback plan and then a slight follow-up to the partnership with PDF Solutions, do you think we're at a stage where there's limited M&A opportunities to create greater scale for the business through M&A versus just, you know, repurchasing stock? Or do you think the best way is, you know, doing what you're doing, invest aggressively in what you know and understand in a stock that's undervalued, as well as, you know, expand opportunities through partnerships, but like a PDF solution versus, you know, maybe more consolidation in the back end, if you will?

42:40 So, Christian, I think we look at all three of the areas you talked about. I mean, as we've shown, you know, for capital return, we have a very attractive dividend, which we increase every year, right? In addition to that, you know, on the share buyback, you know, we did a very, on an optimistic basis, the open market repurchase, which, you know, we've also been pretty aggressive on. And then, obviously, we did do the ASR of $150 million, right? So we do believe that the stock is undervalued currently and definitely undervalued considering all the exciting growth factors that Fusen talked about. As far as partnerships, we're always open to partnerships, whether it's PDF, other people, in terms of providing better solutions to our customers and also monetizing these solutions and hopefully these will become more sustainable.

43:30 But we don't actually think that M&A is not something we would look at. We've always looked at it. and, you know, I'm not sure whether we look at it from a consolidation standpoint in the back end. I think what we look at is to basically adjacency, particularly in things that, again, we think there's a lot of opportunity in automotive and advanced display along the supply chain for mini and micro LED. I think we're looking at a lot of different things there as well as, you know, things that will enhance our Thank you very much.

44:24 Great. Thank you for that clarity. No other questions. Congrats on a great quarter and a great outlook. Thank you. Thank you, Christian. Thank you. Our next question is coming from David Dewey from Steelhead. Your line is now live. Yes. Thanks for taking my question.

44:42 Lester, I was wondering, you know, I think it was at your analyst day you talked about having gross margins improved by about 500 basis points from, I believe, a 47% rate. and we just saw that you achieve that gross margin target or rate in this current quarter. But it was mainly driven by mix, as you mentioned, a one-time true-up. I think when you were referring to the 500 basis points improvement of gross margins before, it was going to be driven by lower cost and new products, particularly I think a new wirebonder product. I was wondering if you could give us an update where you are with the new product initiatives and if the new products continue to come out in the future, will gross margins perhaps grow higher than the 50 or 52% range?

45:27 Well, Dave, I think we said 51 to 52, and you're correct. You have a great memory. We did talk about the core business. I mean, Fusen's really driven cost reduction over the last couple of years. We're continuing to drive cost reduction down, which will help our margins. I think also we do have new products in our core business, both in ballbonder as well as wirebonder. And these new generation products actually will have very attractive ASPs because with their UPH as well as their accuracy, the cost of ownership to our customers actually are falling. So therefore, we can maintain... Thank you very much. you know, the gross margin in the 51-52% range.

46:27 And that's both from our very strong core business through cost reduction and new products as well as the new vectors in automotive advanced display and advanced packaging.

46:40 Okay, and a clarification question. What should the share count be? Maybe you mentioned this, but I might have missed it. What's the share count going to be in Q2 and going forward?

46:52 Dave, you should use 60.1. Million, sorry. Okay.

47:00 Excuse me.

47:01 And Fusen, you mentioned, you know, we've talked about this in the past. There's a higher capital or wirebonder intensity with some of these heterogeneous packages and multi-chip modules. I'm wondering if you could, you know, maybe update us on what you think versus just a standard dye. How much more capital intensive you're seeing some of these newer advanced packages are than just standard parts?

47:35 Actually, we don't have this on hand right now. But roughly, I think we continue to see this multi-dye. Actually, all the growth maturity focus on a new area. I mentioned three new areas. You know, you need to, like a multi-die, not only die to substrate, you also need to connect die to die. So therefore, increase capital intensity. And this is a new shear environment, you know, after you bond, connect to a substrate. And you also need to build a fence or cage along, you know, the die to make sure it's not interfere, you know, to next die. This also increase capital intensity, right?

48:20 and continue to find applications. So I think before, say two or three years ago, our wirebender may be dealing with 1,000 wire. And right now, we are doing about 2,000 wire. So actually, if you count it, capital intensity without productivity increase probably almost double.

48:47 OK. Could you just remind us of the mix in the wirebonder business between OSATs and IDMs, and what would you expect that mix to look like in the back half of this calendar year?

49:05 Well, Dave, I mean, the mix between IDM and OSAT does shift from quarter to quarter, right? So, I mean, it's been running for ballbonders, sorry, the core business. I think in the core business, in the last couple of quarters, because of the huge ramp in capacity, and as you know, when things ramp based on capacity, the OSAT tends to be more active because they are generally where customers go when they need immediate capacity, right? So that was close to probably to, I would say, almost 90% OSAT, 10% IDMs. In the most recent quarter, Q2, it shifted a bit. I think it's closer now to about 75-25 in terms of OSAT and IDM.

49:50 The IDMs now have become much more active, particularly, again, as the automotive business is very strong, as you know, and our automotive business actually is quite focused on the IDMs.

50:04 Also, David, I have to add, I think we have a very diversified customers in both OSAT and IDM. and sometimes I think some offset probably have enough capacity. Not necessarily all the offset has full capacity, right? So I think we have a pretty good relationship with all the customers and we work with the customers and especially I think a bull bound in my opinion is reaching to another cycle. I think our next cycle we believe will be longer and Bo Bonder on TABO unit growth, I think will also grow with a special application I mentioned, like a multi-die, the new shear requirement and potentially can be used for the memory, not only for the NAND, which we have very, very high market shares. I think DRAM will still have much room to go to get the market shares.

51:04 Okay, final question from me is you talked about I think I see unit volumes getting a bit better in the back half of the calendar year. I was kind of curious how you might be looking at this. I guess it was my understanding in the middle of this year, you kind of have the five nanometer transition at the big foundry in Taiwan, and that's definitely going to drive higher units. But I was under the impression a lot of this trailing at capacity wasn't going to come online until early next year. What's your view of both the front end from the advanced capacity and the trailing capacity and when it will come online. And I'm imagining that the trailing edge capacity is more relevant for you as far as a wirebonder opportunity, but maybe not. So if you could elaborate.

51:52 That's correct.

51:53 I think, David, I think you are right. I just try to, I think, give an example. I think broadband continues to be extended. Even a 6-millimeter, I think a new application is going to be a big application in the mobile space. and so I think a lot of people believe ball bounder actually is a very old technology but I can just tell you there's a lot of very sophisticated technology over there and it continues to extend because ball bounder, wire bounder is the most effective for interconnect. So we believe, a lot of people believe 20 nanometer but will be more free chip but actually continue to extend and people, is actively working on the six nanometer.

52:41 Might not be high volume production by end of this year, but for sure, the volume will come quickly.

52:50 Thank you. Thank you. We've reached the end of our question and answer session. I'd like to turn the floor back over to Joe for any further closing comments.

53:00 No, no, no. Thank you, Kevin. Thank you all for joining today's call. Over the coming months, we will be presenting at several virtual and in-person investor conferences in New York and San Francisco. As always, please feel free to follow up directly with any additional questions. Have a great day, everyone. Thank you. That does conclude today's teleconference and webcast. Have a wonderful day. We thank you for your participation today.

Follow Kulicke and Soffa Industries, Inc. into a list and get an email when it puts out news.

Latest news releases

Companies on this call

Speakers

Craig Ellis

Analyst, B. Riley Securities

Fusen Chen

President and Chief Executive Officer

Lester Wong

Chief Financial Officer

Joseph Elgindy

Senior Director of Investor Relations

Krish Sankar

Analyst, Cowen & Company

Tom Diffley

Analyst, D.A. Davidson

David Dewey

Analyst, Steelhead Partners

Christian Schwab

Analyst, Craig-Hallam & Co.

More from Kulicke and Soffa Industries, Inc.