Replay available

Indo-Mim (NSE:INDOMIM) Q2 2027 Earnings Call

Indo-Mim (NSE:INDOMIM) Q2 2027 earnings call, held 2026-11-16. Watch the replay and read the transcript on 6ix.

Mon, November 16, 2026 at 6:26 AMendedReplay
Indo-Mim (NSE:INDOMIM) Q2 2027 Earnings Call
Company
Indo-Mim Limited (NSE:INDOMIM)
Period
Q2 2027 earnings call
Date
Mon, Nov 16, 2026, 6:26 AM ET
Replay
Watch the replay on this page · 1 h 6 min

On 6ix: 6ix.com/event/indo-mim-limited-indomim-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Ladies and gentlemen, good day, and welcome to INDO-MIM Limited result call for the quarter and half year ended 09/30/2026. INDO-MIM Limited will be represented by mister Krishna senior, chairman and managing director, Mr. Krishna Chewukala, junior, chief executive officer and Mr. Parra Siraman Bala Balasubramanian, chief financial officer. This conference call may contain forward looking statement about the company, which are based on the beliefs, opinion, and expectation of the company as of date of this call. These statements are not a guarantee of future performance and involve risks and uncertainties that are difficult to predict. As a reminder, all participant lines will be in a listen only mode, and there will be an opportunity for you to ask question after the presentation conclude.

0:47 Please note that this conference is being recorded. I now hand the conference over to Mr. From HDFC Securities. Thank you, and over to you, sir. Thank you,. So the format of the call will be that Bala will be giving a few minutes presentation on the financials, and post that, KJ and KJ will be there to take your questions. Thank you, and over to you, Bala. Thank you, Baruchit. Thank you, gentlemen. See, the presentation about the performance of the company has already been given to the stock exchanges. I'm sure you can get a copy of it. The results were published on Friday, and I'm sure all of you have had a look at it. Overall, this is a this is a quarter which is in line with the previous quarter.

1:36 We ended up with a top line of thousand 271 crores as against thousand 218 crores in the previous quarter, But this is much better than what it was in the corresponding quarter the previous year. On a half yearly basis, we have definitely grown that will cover up separately. As far as the profit numbers are concerned, the the last quarter, we had a $3,325 crores of before exceptional items. This time, we have 309 crores. The overall top line target that we gave for the current year was 5,000 crores on top line and 850 crores on bottom line. And we are poised to go to that number comfortably on the top line and perhaps marginally meet that in the bottom line. But we will give an assurance or any assurance on that only the end of q three, because then we'll have fairly good idea about where we are going.

2:23 So on a on a on yearly basis, compared to FY twenty six half year versus the current half year, now there is a growth in the business to the tune of about 263 crores on the top line. We ended up with $2,004.90 crores. It is $2.63 crores up, And EBITDA is 32%. There's about 6.3% more than what was there in the corresponding half year in the previous year. And the PAT is about 459 crores, up by about 168 crores. But if you remove the exceptional items, the profit numbers have been more or less same. So profit before the exceptional items, if you look at, numbers are more or less in line with what it is, about one one and a half percent is the additional amount that we have got. So as far as the growth drivers of the company are concerned, we continue to focus on improvement at the bottom line.

3:19 We had higher returns on lower leverage during this period. Return on capital employed was 36 and a half percent, up by about 55.7%. Return on equity was 26.3, up by about 3.4%. Debt equity ratio was point two seven, down from point five, down to point five. Then debt to EBITDA is point one nine. So overall, all the parameters of the company are much better than what it was at the start of the year. You know, as far as the, you the performance of the company for year on year is concerned, debt to equity ratio has fallen down. The total debt of the company today is at $9.41 crores as against thousand 258 crores in the corresponding period. And working capital is much better today. Inventory days are something which we are working on. Receivables days is at 64, which is very healthy.

4:13 About 80% of our business is exports. An average transit time is between fifteen and thirty days. Average credit period that they give to a customer is about forty five days. So maintaining it at 64 is an exemplary good job by our marketing team. Inventory days continue to be higher. In fact, compared to previous year, the number is higher. This year, it used to be at three forty days. Now it is at four forty one. But this is the conventional basis on which inventory is calculated. But if you segment it into raw materials, WAP and finished goods, we feel on raw material, are in a comfortable position. WAP is something we have from work, and you will see improvement in these numbers by the end of the year. As far as payable days are concerned, we are at eighty eight days. It is a heavy number. So overall, the cash conversion cycle will go down. Right now, it is at 417.

5:04 It is expected to go down as the year ends. And business wise, you see right now, about 60% of our turnover comes from NIM. Investment casting, our casting business accounts for about 19%. Machine are... Gives about 8%. And powdered gives about 1%. All other businesses gives about 11 to 12%. And similarly, you know, if you see the segment price breakup, you know, aerospace business is up by about 31.5 percentage. It contributes 9% of our business. Automotive business contributes about 25% of our business. That is up by about 19.4 percentage. And, you know, the consumer business is about 15% of our business, and that contributes about 46.5.

5:55 And VPG is about 20%, and the contribution 19.3. Medical is about... Medical business is very small. It's about 19%, and it is up by 22 and a half. So all the conventional businesses in which we are in, they're all up. Electronic component manufacturing business is down by about 40%. It is because we knew that this business contours are going to be different in the current year. It contributes 11% of our business right now, and we expect that they are... The end of the year will be in line with the budget as far as this business is concerned, which is close to about 500 crores. Right now, we are done about $2.68 crores in this business. So we feel that this will be comfortable in that for the end of the year. But it will definitely contribute a much lesser number compared to the previous year. Overall, if you see the revenue buildup, you know, on a stand alone basis, there are 2 and 2,073 crores.

6:47 On a consolidated basis, we go to $2,004.90 crores. Two significant contributors among the subsidiaries to our... INDO-MIM Inc, which is a metal injection molding subsidiary that is contributing to. On the bottom line front, stand alone business is 443 crores of the tax. Overall, tax is $4.55. So INDO-MIM is contributing to 52 of course, and all of the subsidiaries are actually marginally losing money. So overall, the drag... They are draggers, but we expect that as the year ends, triads will come to near about net net zero profitability. Our losses won't be there by the end of the year.

7:32 Next year onwards, will turn the corner. That's what we believe because we are also indicated it in the earlier calls. We are seeing very good growth in the segment of business in which Mr. Krishna Junior will be talking. So overall, we expect that the fact numbers for the current year, whatever we have indicated at the start of the year can be met, maybe comfortably met. And so we would like to close by saying that we continue to focus on... Continue to do new products faster. We continue to drive productivity in the company. The price realization is going up for various reasons. We'll give you the reasons during the course of the question and answer session. And we'll do selective investment based on their growth potential is.

8:18 Because we have very deep understanding of customers' requirements, we have good engagement with the customers, we are able to assess what is required for the customer and accordingly make investments. As far as FY twenty seven is concerned, we had indicated a top line target of 5,000 crores and a bottom line target of $8.50 crores. We are just about there as far as the top line is concerned. Bottom line will be slightly ahead of what we indicated there. But we are we are not in a position to give an estimate of it right now. We'll give an estimate of that in the next quarter. That... Now we continue to be in good business segments. Now we have... We had indicated even at the time of listing that we are seeing good growth in some of the business segments such as aerospace, machining, and casting. We continue to have robust growth, and you'll see that in the business segment itself that the numbers are growing.

9:06 There's some new emerging requirements for engineered components starting from private satellite companies to humanoid robot companies. We are very well placed in those businesses, and those things will actually make a big difference for us in years to come. We can perhaps cover all these things during the question and answer session. I'll close this at this point in time so that I don't take more time in talking about what has happened. We'll discuss about your questions and answers. Thank you., we can go... Move towards q and a. Sure, sir. Ladies and gentlemen, we will now begin with a question and answer session. Anyone who wishes to ask a question may press star and one on the touch tone telephone. If you wish to remove yourself from the question queue, you may please press star and 2.

9:56 Participants are request to use handsets while asking a question. Ladies and gentlemen, we'll wait for a moment while the question is submitted. First question comes from the line of Mohit Kumar with ICIC Securities. Please go ahead. Yes. Good afternoon. And congratulations on a very strong H1. So my first question is on the H2 numbers. I think your guidance indicates a similar H2 in terms of revenue, but it seems the margin is seems to be much lower. So my question is, is the mix of revenues in H2 going to be very different than what we did in H1?

10:46 Mohit, you know, the profit margins in the company are primarily decided by the kind of components we do. Within the same segment also, the components can be different. You would see observe from the raw material consumption number that the raw material consumption on a unit basis is much higher at this time than it was in the previous time. That's because if you do heavier components, you know, the margin as a percentage of sale will look lower. So, you know, it depends on the components we do. We do about 6,000 to 6,500 SKUs quarter on every every month... Every year. And on an average, about thousand to 200 different components get made every month. So it's a thought combination with the same. That's why we always talk about two things. One is what is year to date performance. Second is what is the overall number that can be achieved for the year. Understood.

11:36 My second question is, can you talk about the medium term outlook for Tri X business given the strong demand outlook, we believe that this segment looks to be in a very strong position. And the later question is that, do you make the aerofoil blades for gas turbines as well as aerospace business? Yes. I'm going take this from Bala. Yeah. Yeah. Yes. Both Triax and our Trippancy facility in casting have a lot of exposure on the... In the IGT and in the aerospace engine application space. And yes, for the past three years, both Triax and Dripsy have been seeing a large number of IGT programs.

12:23 I think with Triax, right, as my father said, these programs have been underdeveloped coming into a production. And it looks like as long as we continue to work on throughputs and efficiency, we should be having that unit into profitability fairly soon. In terms of India, you really don't see it in the numbers yet. There's strategically, there's a huge amount of product development happening. We've won many programs over the past year and a half, but it will take time for those to translate to production. But yes, we are seeing very, very heavy demand in the IGT space, along with things like humanoid applications, satellite applications in addition to that. Does that answer your question?

13:13 It does. Thank you. Best of luck. Thank you. Thank you. Next question comes from the line of Bala Murali Krishna with Human Investment Advisors. Please go ahead. Thanks for the opportunity. I hope others can listen. Yeah. You're you're coming in very faint. Hello. Your voice isn't clear clear.

14:01 Yeah. Yes, sir. It is it fine now? Your voice is fine. Is this Bala's voice? Yeah. It's my voice. Yeah. My question is regarding this growth in the past few years. So there are numerous various acquisitions that have taken place to have a in the past few years. So how do you see this growth in the medium term so whether we can expect it from the organic point of view? And do we have any plans that are already in discussion for some other acquisition which can help us to grow or maintain the growth of the past few years? KJ will take this?

14:48 You just repeat the question for me? You said in the past year, you have kept up this is about future growth prospects. Is it going to be organic, inorganic? That's the question. Think going forward, obviously, that's a very good question, and it's always a question. Wait a minute. He has a follow-up. Yes. Please go ahead. No. I I I will ask that later. Please proceed, mister. Can I can I address that? The organic growth will be very, very satisfying. And our INDOMIM is a global company.

15:34 It is headquartered in India, has operations in Europe and The United States and quite possibly in Vietnam and in Singapore in the future. A lot of that will be organic growth, which will be very strong because we have a big platform all over the world. But at the end of the day, there's a lot of opportunities that will come up, and we'll be very opportunistic, in terms of, inorganic growth possibilities where we acquired companies abroad and bring the technologies back home to India. So as the Indian economy grows, we constantly have exposure to the most advanced technologies being developed in Europe and in The United States.

16:25 And our presence globally is very unique in terms of future opportunities and the position in North America. That's my answer. Yeah. Yeah. Thanks for that. Is it clear? Yeah. Yeah. Yeah. It's clear. Another CapEx CapEx plans for this year, I think we have some backward integration to produce raw material in our facility itself. So other than that, do we have any CapEx plans? And how does this CapEx in the shape of the growth or margins? I'll take that question. Sure. I think generally, we have put on our primary processes, right, we have, plenty of capacity, you know, whether that's in metal injection molding or in casting.

17:20 But, you know, investments will be targeted at things like secondary operations, machining to finished parts. Right? We have some very significant programs developing, which will require investment over the financial year. Numbers exactly are coming in now. So but again, no real major CapEx investments in our primary processes. Most the capital expenditures will be for secondary processes to support existing programs that are ramping over Q3 and Q4. Thank you.

18:16 Next question comes from the line of Deepa Krishnan with Kotak Institutional Equities. Please go ahead. Hi, sir. Am I audible? Can you hear me fine? Yeah, Deepak. Very well. Yeah. Maybe just wanted to understand on growth prospects. Essentially, you've touched upon a bit on the humanoid robots. As far as some of the initiatives you were looking in consumer electronics, any progress there? And maybe just both, you've sort of broadly indicated triads, but if you could sort of give a growth number, maybe this year, next year outlook for both Triax as well as the aerospace machining. In that context, wanted to understand how big is this deal signed with Safran Aircraft Engines last month? And what is the purpose of this new subsidiary setup in Vietnam?

19:02 You know, when do you start seeing revenue coming from it? You know, what are sort of the prospects over there? If you could sort of answer that, I'll come back with the second questions. Yeah. I'll start with I'll start with Vietnam. So, yes, you... Yeah. You've seen the expansion into Vietnam. That is related to our electronic component manufacturing segment. We should be expecting that to start generating revenue in fiscal twenty eight. Now what was the other question in terms of the general electronic component manufacturing? The numbers for that, in terms of both growth, it's a little bit slower so far in Q1, Q2, but we do expect to be, once again, achieving budget in this segment.

19:52 And we also expect growth in the future. Obviously, we can't talk numbers at this point, but it is an strategic focus. And we do expect the Vietnam operation to be generating revenue in fiscal twenty twenty eight. KJ, the question was on Safran, what we signed up. We can give you an idea. Safran. Yes. Safran, it's a long term contract. We can't I don't think we can really talk about the the numbers quite yet. Do we talk about numbers, Bob, or no? I'm I'm Yeah. No. Not numbers. Actually, they are asking what is objective. How does it... How do you think about this business? Because we have signed up something. Do you see a very positive trajectory on that? Yes. I think the... Yes. Overall, I think it's very, very positive. I mean, the saffron business, in my opinion, what you're seeing now is the European OEMs start making room for capacity for basically other programs which are military related, generally due to the increases in defense spending.

20:52 So companies like Safran and many others that we're in discussions with, right, have very, very significant business that they wish to source overseas across the civilian aerospace and the drone space as well. We're seeing a big increase in the number of IGT programs, in the civilian aerospace programs, along with very, very significant activity in the drone component space, which is emerging right now. But everyone realizes, I think, that these those types of programs come to very high volumes. So where where the business with Saffron can go next, don't know. We first have to execute on these contracts, you know, obviously, do do do well in product development.

21:38 But, you know, it will... Saffron, once you prove with them, I'm I'm very confident that it will result in the initial business, but we have to execute on what we have first. Deepak short inputs to more. As far as Vietnam is concerned, what we are going to do is development work will be done in Vietnam. It'll actually push up the business in India, ultimately. As far as Safran is the same, Safran is not the only OEM with whom we have signed. Basically, every one of these agreements signed opens up the door for more and more components to be manufactured for them. Aerospace business growth is going to be dependent on adding new parts all the time, And we are really getting the speed right now. As we sign new agreements, actually, more and more parts open up for us. We had indicated earlier roughly about 200 components we do for the aerospace business right now. Our job is to increase at least the 400 components in the current year is what we had indicated earlier. We are on the way. I think all these things will help us to do that.

22:31 Yep. Sure. Maybe just one follow on on rate, ma'am. Can you sort of integrate who the client is with the accordion major or American major? Any any other details that you can sort of share there? We can't do that. You know that. We can't do that, but we can't do that. Sure. And maybe just sort of, even you wanted to, you know, broadly check on, you know, last year seasonality wise, we saw, you know, 3Q, 4Q to be slightly weaker than this. Is that the case that December quarter because of U. S. Holidays is relatively softer and then Q4 picks up? Is that a similar seasonality we expect this year as well? Or it's more of just product mix in every quarter? Actually, last year was slightly different. We had electronic component business from India, which actually added significantly in the first quarter, which was not very less in the second quarter. This year, that thing is not there. So we expect it to be more even quarters in this current year.

23:29 Sure. Sure. Okay. I'll just get back on the queue for follow-up questions. Thank you. Thank you. Our next question comes from the line of Manojain with Warri Family Office. Please go ahead. Yes. Hi. Hello. Hello. Am I audible? Yes, Manojain. I'm speaking. Can you hear me? Please go ahead. Yes. Just wanted to understand on the gross margin level, what was the reason of the expansion? Was it RM prices? Was it a component mix or sector mix FX? What was the reason of the gross margin expansion? The entirely on account of combination of parts, there has been no increase in the RM prices during this period. The ForEx has been more or less stable. So it's basically Component mix.

24:23 Component mix. Okay. I'm sorry. Component mix and better operational leverage. Okay. Got it. And how much FY twenty seven revenue are you expecting from The US? And what is the realized tariff impact? And are you guys absorbing it or the customers absorbing on that? Asked about tariffs, Manas? Yeah. Yeah. Yeah. Tariff is actually... I'm so sorry. Can you repeat? We export the components on DDU basis. The impact is on the customer. It's not on there. As far as the business from US is concerned, we expect it to be more or less at the same lines, about 55% or so was from US last year. It continues to be around the same level. There has been no big change.

25:16 Yeah. Yeah. I think that's all from my side. Yeah. Thank you. Our next question comes from the line of Raj Shah with Inom Asset Management Company. Please go ahead. Hello, am I audible? Yes. Thank you very much, sir. Sir, my first question was on the smartphone business. So just wanted to know, is there any progress for the proposed supply of MIM parts in smartphone value chain? How do we stand over there? Hey, Jay.

26:02 I think it's a transition which is happening. We're seeing definitely an uptick in the number of development programs, but it still hasn't translated into numbers yet, but it's definitely something that we'll be updating out in the future as it matures. Okay. Can we hear something in this financial year? Or you expect this is a much longer term project? Raj, actually, we'll come in. We'll know by the end of Q4, right, what the numbers will be in this segment for the current financial year. Last year, what happened is most of the sales were front loaded into the first two quarters, right? But we see this year in that space is a little bit more even. So, I mean, I think, you know, we should be on budget for a little bit below for that segment, but it will also set up a very strong fiscal twenty eight.

26:56 Raj, your question was on NIM components. We will get a fairly good idea about it by q four because the NIM components, when it starts, we'll get the tool orders first. We'll let you know. Right now, there is a delay from the customer side for sure for start of NIM components in India. So we'll get to know in days to come. Okay. Lot of discussions and nothing that we can announce at this point in time. Understood. Understood. Sir, second question was on the industrial gas turbines business. I'm not sure if we are in the value chain of GE. But recently, we read the news of a software and canceling orders with few gigawatts the GE order book. So now do we... Are we impacted in this by this trend? And what are the prospects in that business?

27:51 You know, with regards to GE, I don't... And and that trend, I think what you're saying is GE canceled some orders with suppliers. Is that what you're saying? And you're asking about do we see that in any of their places? Yes. Yes. So SoftBank canceled some orders from GE. So Right. So one thing is, strategically, when we approach this business, you got to approach it through two lines. One is the technical capability required to execute these components, the one with the quality systems, which is very significant and difficult. And the other, obviously, is your penetration in The States, and the third is where the market is headed. Now in terms of what we see and what we've done over the past two or three years as we've as our presence in this space has started to mature and run programs is, one, we're penetrating across the board when it comes to OEMs, whether that's aerospace or IGT.

28:54 Aerospace obviously takes longer to mature, but also has very, very significant growth penciled in over the next ten years due to the increase in number of engines sold to Southeast Asia. And IGT is going to be booming, it looks like at least for the next decade to fifteen years as the generation requirements associated with data centers continue to mount. In terms of any market pullout, we don't like GE or we don't see any of that, right? What we see is OEMs that need capacity and they're willing to do and if you have the technical capabilities, they'll come to you, right? They're willing to work at this point in time because there's a huge amount of demand and they don't have the ability to solve all of it.

29:40 So that means airfoils and casings and housings, all of the standard IGT components have very, very strong demand right now. And there's a lot of very, very active product development going on across the group in this area. Raj, to answer your question, have you seen can't talk about any one customer, but we can generally tell you, we have not faced any cancellations till now on this segment. Yes, zero cancellations. Excuse me. Should have just said that correctly. Okay. Got it. Thank But the opposite, customers seem to be pulling in things and customers, as soon as you demonstrate capability on the first program, they're generally willing to start discussions on the next package. So it's it's very favorable market as long as you have the technical capabilities to execute on the program, you know, which which we do.

30:33 I think one of the comments I would like to make, GE GE is not the only supplier to industrial gas in the market. There are other players in the market, OEMs, like, energy, so on and so forth. And we've seen a very good order book from this other OEMs of gas companies. For example, the South Korean companies, the American companies. Yeah. I was saying good stuff from there. GE is more vertically integrated. So except for the in the hot zones and stuff like that. The rest of it, you know, GE is pretty self sufficient.

31:22 They just bought some companies in the in the food chain. So... But it's a big market. I mean, GE is not the only tech. That's the main point I wanna make. There are several others, and we're actually. Okay. Okay. Thank you, sir. It's definitely a growing market. Definitely a growing market. There's lot of potential. We are in there solidly. Thank you so much, sir. Right. Course. Ladies and gentlemen, in order to ensure that the management will be able to address all the question from the participant, we kindly request you to please restrict your question to two question only per participant.

32:14 If you have a follow-up question, please rejoin the queue. Our next question comes from the line of Praveen with. Please go ahead. Yeah. Thanks for the opportunity, sir. I just wanted to kindly repeat the segmental revenue breakup and the one. I'm getting in the presentation from the stock exchange. We already given it. No. So the aerospace and automobile segment. Can you repeat it? The aerospace and automobile are consumer part. Those are not the No. The numbers are there. Do you have any specific questions about the numbers, sir?

33:04 In the presentation, uploaded is there in the... Just as a missionary. Right? The revenue segment. You say it will be uploaded right now? Yeah. It has been uploaded in the stock exchange. I'm sure you will get the numbers. Okay. You can see the numbers. It's available. Okay. And one more thing on the Eastern manufacturing whether we will be expecting the same revenue what we have generated in FY 'twenty six as overall FY 'twenty seven? Sir, actually, we had if you remember, we had indicated about INR 40 crores less than we have in the current year. Correct. Right now, we have completed more than 268 crores in the first half. Roughly, the same number will come. And what we need is about 480 to 500 crores. That is the target for us. So, yes, we will be there.

33:51 Okay. Okay. Thanks. Thank you. Our next question comes from the line of Abhinav with ICICI Securities. Please go ahead. Yes. Hi, sir. Thanks for the opportunity. My question is you can stop on humanoid application as well as active applications. Can you elaborate on this? What are the volumes currently? How much can this scale up to? And what is the in terms of value, what is the revenue expected? We can't talk numbers at this point, but we have active programs under development. And we will we're very active in the space across multiple customers. And we'll have you'll see there'll be an update on that once the numbers start coming in probably in January.

34:40 So we think about forward. But we're very active in the space across multiple customers. And we're very positive about its future prospects. But until actual numbers come in, you know, I think it's better for us to be a little bit... You know, we have to... We got we got to get the numbers before we can report the numbers. So this is across multiple customers. Right? Not not focused on just one custom. I can give you one idea. KJ, no. I can give you one idea. You read what is being spoken by the topmost guy and what is the number that they are being spoken. The numbers are very high. Understood. We are... We have to be right there in that space. And even if the number that they are talking about 10% is missing, that is going to be a super late year for most of the guys who are supplying to this industry.

35:27 INDOMIM is not going to be any different. So we are not talking about 100%. We are talking about just 10%. Okay? Got it. And I'm sure in all of our technical days are there. You can see for yourself. You know what it is. Understood, sir. Yeah. So my second question is on backward integration. Just wanted to understand what are the plans here? What is the total powder melting capacity? And how much of this powder you intend to use for captive? How much for external sales? And, you know, what benefit at EBITDA level one can expect from this backward integration? Actually, this is something which we have done basically for... Primarily for supply chain security. But once we start doing it, we get advantages on account of the fact that we are there at the right place and the emerging demands come. Right now, what we are putting up is an iron ore manufacturing facility.

36:16 Roughly about 3,000 tonnes per annum is what we'll be producing out of that. We will need about 500 to 2,000 tonnes for our expanded requirements. Maybe about thousand to 500 tons will be available for sale. There are some very interesting applications which we are talking with the customers, potential customers right now. We can't name the customers. We can't talk about the applications. But, you know, we feel that, know, you this capacity that we have in addition to whatever we need can be comfortably, you know, disposed off for a much higher value addition than what we are doing right now at this point in time when we are buying the product from outside. As far as margin assumptions are concerned, right now, we don't assume You about the stainless you thought about the stainless steel bottle. As far as the stainless steel powder is concerned, you know, that is already there, KJ. That's why I didn't speak. So we have already done the backward integration where for our own use, we have already done whatever is required.

37:09 Now there also, we have a very large customer who is looking for additional from us. We are in the process of, you setting know, up the facility for them, evaluating the facility requirements, and probably we'll have some surprise on that segment also in days to come. But, you know, the... So in most of the times when you are putting up capacity, you do it primarily to take care of your supply chain, and then it keeps adding additional businesses, additional lines of opportunities for you. Like, when we put up stainless steel facility, we were initially thinking that we'll actually ensure something changed, then we got into additive manufacturing coders became big. There are some newer applications earlier. Due to confidentiality reasons, we are not able to talk with these applications right now. But in days to come, you will automatically see the impact on the, you know, the top line as well as the bottom line on account of this.

37:55 But right now, we are not assuming any advantage that will come out of this capacity in calculating our profitability. That is because the capacity to be fully used will take some time. So during that period of time, you will not get the advantage of the reduction in the cost. When we... When the capacity comes reasonably used, about 70 or 80% is used, that is when you'll realize the value of operating leverage. We'll talk about it in days to come. Thank you, Savi, for all the best. Thank you. Our next question comes from the line of Omkar Selgowkar with ITI AMC. Please go ahead. Yes. I audible? Yes, sir.

38:42 Yeah. Yeah. What do we attribute the increase in inventory days? Inventory days is a product of two things. One is what what do we do as a company for the... Some of the customers who want just in time delivery? Point number two, know, yeah, I think our company h one also h one. K. So the the second thing is there there is always some lumpy increase in raw material storage because we have to order minimum quantity. And then the usage actually comes over a period of time, especially for two businesses, our casting business and machine business. The raw material orders are lumpy because we have to take the entire heat and we have to consume over a period of time. As far as the double AEP increase is concerned, it has something to do with the order book. Sometimes the customers schedule orders in such a way that they'll have to build up a bit more so that we are able to deliver to their requirements.

39:34 So these are conscious decisions that have been taken, but we are definitely working on reduction in the inventory by the end of the year. That's our target for the current year for the balance three months. Okay. Which segment was this in? Any specific segment? Typically, aerospace, machining and IGT business will need higher raw material holding. And as far as the inventory in AAP is concerned, it is in the main segment you will have higher double... WAP inventory because we undertake components which involves substantial amount of finishing. MIM is a very efficient process. It is faster, whereas the machining operations are a bit slower. So you end up with slightly more amount of WAP so that we can ensure just in time delivery of a large quantity. Okay.

40:21 Got it. Got it. Secondly, how do we see the defense segment growing? And is that the highest margin segment for us? Medical is the highest margin segment because it is lifestyle business. See, different segment, we are expecting it to grow in India significantly in the next two years because a lot of companies have been licensed. See, we are into small arms components. We are not into large arms. Small arms components business is opening up in India. About 30 companies or so have got licensed of manufacture of small arms. But more or less, most of the company, we are the components of players, and we are giving the first set of samples to them. They are waiting for government order to start with so that they can go out and sell in the world. So we expect a good growth in defense business in India in general.

41:06 Being a company manufacturing company, we get the additions of this business only when they get the orders. As far as the overseas business is concerned, you know, we expect the growth in this year total even during prior to IPO also. We're expecting that NATO spending on defense is actually going to make a significant difference for defense, you know, business in European area. US continues to be robust and growing. So overall, we see that defense business is going to be a growth driver for us. I'd also add that when it comes to the European market, right, we're only just now seeing the big increases starting to flow through. So it still will take a couple of years for that market to mature in the defense space, but it's clearly going to happen. Got it. Thanks.

41:58 Thank you. Ladies and gentlemen, in order to ensure that the management will be able to address all the questions from the participant, we request you to please limit your question to one question only per participant. If you have a follow-up question, please rejoin the queue. Our next question comes from the line of Deepak Krishnan with Kotak Institutional Equities. Please go ahead. Hi, sir. Thanks for the follow-up. Just wanted to understand what drove the 46% growth in consumer segment in 1H? Anything particular that you would want to call out? And how does this momentum sustain to 2H as well? The small business because for a percentage of growth should not be read too much. There is healthy growth of parts in this business. So things are growing. It's... Yeah. The number goes up, but we had to worry about it. Right now, growth is there because parts are coming.

42:51 Sure. And maybe just one question on your other income. Is sort of the true to a correct run rate, or was there something favorable last year and, you know, this year, you sort of seen a y y did one h to one h? We expect the numbers to be slightly lower than last year. See, last year, we had other income on account of, you know, somebody, you know, one is, of course, the fact that somebody create refunds which are due from government agencies came in. Then there are also foreign exchange differences. But we don't expect that to be very significantly different in the current year. Whatever is there at the end of q two, probably, we'll have just double of that number by the end of it. Sure. And maybe just try to EBITDA margins currently and and on steady state, if you could sort of highlight that.

43:38 You're talking about triads? Yes. Triads. The triads, had indicated that we'll be doing about 32 to $35,000,000 of top line in the current year, and at that time, we'll be at EBITDA neutral. That's what we had indicated. We are heading towards 32. So we expect that by the end of the year, we may be close to the neutral number. That's what we see. We want it to be first cash flow positive. Thereafter, we'll be able to talk more about it. Sure. Thank you. Thank you. Our next question comes from the line of Kishore Kumar with Genife Capital. Please go ahead. Sir, I have a question on the new business opportunities that we are looking at, the private satellite application and the humanoid robots.

44:31 Can you give us a brief on what is the addressable market for the MIM components? And for the private satellite application, is it gonna be a LIM component or the casting component that we are looking at? Okay. Ajay? Yeah. You know, like, we can't give an exact number, right, for the humanoid. But you can see, you know, we have many, many components, right, that we're... That are that are being developed across the entire space with, you know, all... With what would basically be all major players that, you know, are in the space. And, you know, if you believe their numbers, then the volume... It's it's gonna be very, very significant in terms of its impact. You know? But I think Bala already mentioned that even if 10% of these volumes come through, it will... It's going to move the dial in terms of top line for, you know, basically all of the suppliers participating.

45:24 And, you know, we're not just doing MIM parts in that space. We're also we're also be... We're also doing MIM parts plus machining. There's additional machining discussions that are happening. We can't really talk about them, but they're all very significant and the volumes are quite large, but we'll have a better update in January on its impact in fiscal twenty twenty eight. When it comes to the space based applications, what we're seeing there is it's not just MIM, it's across the group. So it's MIM, it's castings and it's machining. And the volumes across all three segments are very significant. But Got it, sir. Like I said like I said before, we'll be able to say more on this in terms of its impact on numbers in January.

46:15 Thank you. Question comes from the line of very strong. Thank you. Next question comes from the line of Norman with Family Office. Please go ahead. Hi. Hope I'm audible. Yep. Loud and clear. Yes. I can hear you. Great. So congrats on a good set of numbers. Actually, just wanted to understand more from a broader perspective, you know, over the next two, three years, there are a lot of emerging opportunities coming in. So, you know, does that help us to be confident that, you know, what the past growth rates would happen, you know, like, on the team? We could surpass those over, you know, the next two, three years considering that there are so many things that seem to be of broader in... Interest and, you know, our capabilities have also expanded. So how does the next two, three year look?

47:12 If you could highlight on that, that would be great. I mean, everybody lives You on wanna go, Baba? You wanna take it? Yeah. I'll say that. Man, no man lives on host. Yes. We are definitely looking at many interesting opportunities. But generally, you would have seen even during IPO, we have told that we only count those those checks which are hatched. So we look at the numbers when they come and present in front of us saying that, know, at least the sample is developed and order is placed in front of us. That is when we start counting. But generally, the industries in which we are operating today, they're all going through some explosive growth. At least that's the public indication in all these industries. So a company which is... Must... A company which can develop solutions and deliver quality products on a timely basis will always try to gain an situation.

48:02 But, you know, it will be very tough for us to say, for example, if somebody comes and says that I'm going to do 10,000,000 rubles, I can't directly assume 10,000,000 rubles multiplied by my bond value and say that that at least 50% of that will come to me or 80% of that will come to me. So definitely, the numbers look... In some of the industries, the numbers really look great. It's a good kind of situation to be in, where the customers are chasing the suppliers. And we will... As a opportunity, I'm not just... You know, we normally give our guidance for the following year in the month of February when we draw the budget. And then during the year, we try to, you know, see whether if there is any negative development, we talk about it. If there are positive developments, we generally don't talk about it. So we can only tell you these things. We are into aerospace machining, which is a growth industry.

48:48 We are into IGT business, which is growth industry. Is a growth industry. Private satellite business seems to be a growth industry from what is indicated in the marketplace. Defense in general is growing. So we are in growth industry, and we are we are a company which is hungry, willing to deliver. So rest is something we can. Medical, of course, we are just cracking the surface because it's about ten year old industry or fifteen year old industry as far as NIM is concerned. We're just cracking the surface. So overall, the... We are we are in a very positive kind of situation, and then you can make your calculations if you are in a growth industry, what all you can do. Thank you.

49:35 Our next question comes from the line of, an individual investor. Please go ahead. Hello, sir. Am I audible? Loud and clear. Sir, am I audible? Loud and clear, sir. Yeah. Hello. Hello. Yeah. We hear you. Good. Yes. So, sir, I was asking that currently, major of our revenues come from automotive segment, as I can see, 25%, then defense and medical. Going forward, say, down the line two, three years, how can the mix change of the segments? Like, in aerospace, also, we are seeing a lot of opportunities coming in. Defense, you talked new sectors like humanoids and satellite programs are emerging. So how can the mix change going, I'd say, two, three years?

50:29 I'll I'll take that. You know, one, you know, we can only re... We only report numbers, right, once we have confirmed tooling POs or confirmed program POs if it's machining or casting. Casting is also a tooling PO. So, you know, being able to say how the mix will change is gonna depend on, basically, over the next three years, what are the parts that are developed in fiscal twenty eight, fiscal twenty seven, and fiscal twenty nine. Right? So we only have some of that. Right? We don't know exactly, right, what's gonna be going on in fiscal twenty eight in terms of new business development. But what I can say is that there's a tremendous amount of activity and tremendous amount of commercial discussions revolving around electronic component manufacturing, in a land based gas turbines, IGT, civilian aerospace jet engine applications, you know, a lot going on in medical.

51:25 In terms of the aerospace machining, across the entire group, there's a lot of activity. Now how that shapes up in terms of the relative mix over the next three years, while we can't predict that that, we we do know that, you know, as Bala just mentioned, in all of those segments, there... There's either a boom going on, right, but that would be IGT, or a huge amount of products being launched and ramped that would be humanoid and aerospace. And in that environment, right, we... While we may not be able to predict, we know that we're gonna be able to win a lot. And, you know, ultimately, the product mix is gonna depend on what we win. Sir, so have the talks been very encouraging with the end users that we are doing talks with?

52:15 I'm sorry. Could you please repeat that question? Sir, how have their talks been? Like, are they very encouraging, or are they going at a slower pace with our prospective customers in the new age technologies? I think, you know, in terms of, like, how quickly our customers adopting or sending in orders, right, you know, across, like, the machining, casting, metal injection molding, powder, ceramics, what we see is, you know, let's take let's take civilian aerospace. The way these programs work is your first pro... Your first package may only be, like, four or five parts. Right? Historically, you'd have to finish the whole package, demonstrate some... Maybe six months to a year of shipments before getting the next package.

53:02 What we're seeing right now in aerospace, IGT, space based applications, humanoid applications is that the... Either the product launches or the future anticipated demand for which they gotta compare today. Right? Because the lead time in IGT is very long, right, on getting on getting that equipment. So, you know, the moves that suppliers are making today are really about demand in 2029, 2030, you know, which works. They better get parts and suppliers onboarded right now. So... But across that entire suite, we see strong growth. Now what... How does the product mix end up over the next three years? That's gonna depend on what we win. Thank you, mister Gupta. May please rejoin the queue for more questions. Our next question comes from the line of Rajat Kataria with Share India Securities. Please go ahead.

53:52 Hi, sir. Congrats on a good set of numbers. So I just wanted to understand the, segment level margin mix. So can we get a Q o Q segment mix in terms of revenue for the quarter one and quarter two to get a better understanding of the margins? We'll give you half yearly segment wise, but we'll not be giving you margin numbers because these are there are a lot of approximations when it comes to margin calculation. We can just take the direct variable cost alone, but that will not be a good indication for you because, ultimately, the products become profitable because of combination of these. So there is definitely an approximation as to what are the allocations. So it'll be Can we get that q one to q two comparison for the segment mix so that we can get a better sense of what the margins are on the segment basis?

54:48 Yes. It won't help you. I'll tell you why. In the same medical business, I may have components which are high profit margin and comparatively lower profit margin. It depends on the complexity in that particular component. So it... You know, it is not that segment is not the only driver, though segment is a driver. There are segments like automotive, which are price sensitive where the numbers could be under pressure. But, yeah, in high margin businesses, like, let's say, in... Even in defense components, all the components have... Don't have the same kind of margin. So it is one of the variables. We have, you know, we have seen this earlier too. That is the reason why we don't make a generalization saying that always medical business will be more profitable. Broadly, I can say that. But just because the medical business has gone up during the quarter, that doesn't mean my margin will go up significantly.

55:33 It may be heavier components that I'm doing because of which the margin may be at the same level as it was in the previous year or lower also. So that may be not a good way of modeling the margin. I think you should take the weighted average number as it is and then work. That's what I would suggest. Got it. Got it. And for the Yeah. I'll I'll I'll go back to margin guidance if you could tell that. We will definitely give you in January what is going to be the number. But broadly, we... Yeah. I I would like to make one comment here. We compete in many verticals all over the world, and we have one single sales organization for all the verticals.

56:20 So our SG and A and even the debt levels and the interest that we pay, they are sort of combined. And our competition does not have an idea where we're making the real money, and we'd like to keep it that way. You really can go down... But for for us to accommodate your request, we are go down to the contribution margin, gross margin level, and allocate overheads for each vertical, which is not only a difficult task, it's a unrealistic task for us and also competitively puts us in a disadvantage from my point of view. I run the whole company, all the verticals, all over the world.

57:18 From my point of view, certainly, the opaque lens, the competition is important. So we prefer not to double that publicly. I hope you understand. Hello? Yeah. Yeah. Sir, you are answered. Yep. Your participant has left the queue. Our next question comes from the line of with Clear Investments Private Limited. Please go ahead. Very good afternoon, sir. Thank you for the opportunity. So my question is regarding the inventory days, which has, like, significantly increased to forty one days as of h one, FY twenty seven.

58:05 So I wanted to know, okay, what could this number be by end of FY twenty seven and FY twenty eight ahead? Actually, the inventory days in reality will be lower than what is indicated here because there is a conventional. No. We we expect that we should be able to compress it by about seventy five days by the end of the year in the method in which we are calculating now. Okay. So seventy five, like, drastic reduction. So so I think it will be At some point, it will come down by seventy five days. That's what I'm saying. At a by seventy five days. Okay. Okay. And then, like, my second follow-up is, like, can we expect this year to close at the bottom line of around INR900 crores?

59:00 We have given a grade on the grade. Okay. Let you know that in the January. Exactly. We'll get into the guidance from the beginning of the year. That will be updated in January. Okay. Thank you. Thank you. Ladies and gentlemen, that was the last question for today. I now hand the conference over to the management for closing remarks. Thank you. I now to you too. I would like to give an idea about what all inorganic opportunities you see after the last question. Yeah. This is the last question, Mala, so can we start off with his comments. We're done with the question. What are things you are looking at on the industrial scenario?

59:52 What what are the opportunities you are evaluating? Casey, sir? In terms of inorganic acquisition, we have several companies that we are looking at right now. We started our M and A activity four years ago. It takes a lot of time for m and a activity to come to come to fruition, if you will. Because the company you want is not available for sale, and the company is available for sale that you don't. That's typically what happens all over the world. The target areas for us in Europe, we want to make a strong entry into Europe with boots on the ground in the next twelve to eighteen months.

1:00:50 Boots on the ground means manufacturing in Europe for Europe because that's the way the whole world wants. They want mainly India for India, mainly America for America, mainly Europe for Europe. That's what I expect to happen in the future. Of course, we'll we'll export from India also. So we're looking at companies in Europe in the supply chain for the gas turbine industry, for the vacuum gas business, both plants as well as in Dirupati in India to add to our business in this... In Europe. We're looking at a few companies to buy.

1:01:38 They're not huge companies in the range of maybe 20,000,000, 30,000,000, 40,000,000, $50,000,000. If we cannot buy, there's every chance we may not be able to buy. JJ is already preparing the plan to go organic in Europe. We can do a start up in Europe for Europe, and we're strong enough to do that, not just financially, but operationally as well. We are one of the strongest engineering teams in the whole world, in India as well as in San Antonio and in Arizona. So the acquisition program is kind of focused towards buying an INDOMIM company in New York or buying a vacuum casting company in New York or buying vacuum The supplier of vacuum castings companies in Europe, etcetera, etcetera, etcetera.

1:02:40 So that's one area we're looking at very actively. We are looking at companies actively. We are speaking to them as we speak to you right now. I... But I can't give you a time frame, you know, as to when they're gonna close or they're not gonna close. If they don't close, we are gonna do greenfield in Europe. And we have the capacity to do it. We have the market presence to do it. We're the leader in the world. Nobody can even come close. So I have to plan for Europe. In America, yes. We are looking at some companies. We have not spoken with them yet. Our initial bankers are looking at them.

1:03:28 And maybe in the middle of next year, early next year, I may be able to give some more guidance for both Europe as well as for United States. In India, we're not planning on any acquisitions because we're there already. We're looking at Singapore as well for MIM acquisitions because we want to consolidate the market and gain some pricing efficiencies down the road in the future. So I think this is the best I can say at this point. Dara, any addition, Vijay? No, nothing, sir. That's okay. Do you expect inorganic opportunities to play a very significant role in the company's growth? That's the question for me.

1:04:21 Well, given that given that organic growth will be excellent in the next three, four, five years, our goal is to compound that value by doing inorganic growth acquisitions. And I think there's a whole concept of arbitrage as well in the future in terms of our strength financially, operationally playing a good role in terms of our ability to buy companies abroad. I think the whole idea here is there is a lot of grown technology in Europe and in The United States that would need to come to India for India to become my channel in the future.

1:05:20 And just like we brought an INDOMIM technology when it was zero to India, and now it's become a great technology. We brought it to an ANCA. And similarly, in the future, we don't have to reinvent the wheel in India. We can buy a nice big company in Europe or America, take the technology, bring it to India, and grow it in India. Grow the company in India as well. That way, it really become a global global company. Does that answer the question, sir? Yes, sir. Thank you, sir. From my side, okay. Yes. Thank you. Thank you, Bala. Anything else? I will close the call now. Yes, I think so. Thanks, Varishit. Okay.

1:06:06 Okay, Ramesh. I mean, we can close the call. Everyone, have a nice day. Thank you so much. Ladies and gentlemen, on behalf so much, everyone. Thank you so much, sir. Well, thank you all. I hope it was helpful. Thank you. Ladies and gentlemen, on behalf of INDO-MIM Limited, that concludes today's call. Thank you for joining us, and you may now disconnect your lines.

Follow Indo-Mim Limited into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from Indo-Mim Limited