Replay available

Hero Motors (NSE:HEROMOTORS) Q2 2027 Earnings Call

Hero Motors (NSE:HEROMOTORS) Q2 2027 earnings call, held 2026-11-16. Watch the replay and read the transcript on 6ix.

Mon, November 16, 2026 at 11:09 AMendedReplay
Hero Motors (NSE:HEROMOTORS) Q2 2027 Earnings Call
Company
Hero Motors Limited (NSE:HEROMOTORS)
Period
Q2 2027 earnings call
Date
Mon, Nov 16, 2026, 11:09 AM ET
Replay
Watch the replay on this page · 60 min

On 6ix: 6ix.com/event/hero-motors-limited-heromotors-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Ladies and gentlemen, good day, and welcome to the HEROMOTORS Q2 FY 'twenty seven Results Conference Call. As a reminder, all participant lines will be in the listen only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Should you need assistance during the conference call, please signal operator by pressing star then 0 on your touch tone phone. Please note that this conference is being recorded. I now hand the conference over to mister Ronald Mehta from ICIC Securities. Thank you, and over to you, sir. Good evening, everyone. On behalf of ICICI Securities, we would like to welcome you all to HEROMOTORS q two f y twenty seven earnings conference call. Today, we have with us from the management team, mister Amit Gupta, managing director and CEO mister Utkash Tambi, CFO, and the IR team. So we'll start the call with a brief opening remarks from the management team about the quarter gone by, and then we'll proceed to the q and a session. Thank you, and over to you, sir.

1:04 Hello, everyone. My name is Amit Gupta, and thank you for joining this call. This is really a special event for us, first earning conference call for us. Thank you very much for the support in the IPO. The promoter, I think, Munjal family, some of you know that Munjal family is the promoter of the company. And we started this business long back about more than two decades back. And that time, this company, just to give you the background, this company was a sheet metal component company. And this company was the division of HEROTORS Limited, which was our flagship company, which is our flagship company. In 2010 onwards, after the separation of the family in the business, this company started focusing in power train solutions.

1:51 And Mr. Pankaj Munjal, our Chairman, he's really... He's the board member since the beginning incorporation of the company, and he helped guide the company evolution from sheet metal components to powertrain solutions. We made the complete systems, complete transmissions and the ADU system, electronic drive unit now, and we designed to cost. We designed these complex systems and the manufacturing also. Our Board and the management, we will discuss in upcoming slides. So we thought that in the first call, it's important that we share a little bit about the company, what we do, where we have locations, what customers, what kind of systems we make. So we are you can say that we are the design to cost company and globally competitive company, few companies in the world. And we make the CVT systems also for electric mobility for the European market that doing two wheeler industry.

2:49 Maybe we are the only company making that. We have two business divisions, AS and transmission, powertrain solutions and alloy and metallics. Alloy and metallics is our legacy business, which we started more than two decades back, and we made some components, the sheet metal components, painting, machining, all those components there. Powertrain solutions business, we started in two thousand twelve, thirteen, you know, and and we started making components for the gas and transmission. So we have two two subdivisions in the power chain solutions. One is gas and transmission, and one is by power train. In ASN transmissions, we make the complete systems and it's for automotive, aviation, marine, defense, that kind of systems.

3:34 And in bike powertrain, we do for the micro mobility for two wheelers and three wheelers for the global market. In overall, we have two tech centers, one in U. K. And one in India. U. K. Tech center focused more on automotive and aerospace and Indian tech center focused more on the micro mobility in bike powertrain solutions. We have six manufacturing facilities, four manufacturing facilities in India, one in U. K. And one in Thailand. We do most of our manufacturing of components in India, and we do the final assembly closer to the customer. That is how our business model runs. We have, you know, since... When we started our business in Powertrain Solutions, it was like a component business, as we said, and it was transformed to systems, and then we found systems. We started designing also the complete system. So we now make our own design transmissions and we serve the global market, global customers.

4:31 In our system of business, we are about 56% in transmission. And if we see in transmission, about 28% of our business is in EV and hybrid solutions. In bike powertrain solutions, 100% of the business is in EV and hybrid solutions, and we make 100% of the business in systems, also a part of the system. So we don't make components there in bike powertrain solutions. If you see, you know, in acquisitions and JVs in the past few years, is the company which we acquired in UK, and this company works as our design house. So we make our design for the transmissions during UK. We have good engineering people there. We have one facility where we have the you know, engineering people, prototyping facility, and the manufacturing facility, and one facility we have for the testing and validation.

5:28 Is a joint venture with a Japanese company, Yamaha Motors, and here we make the motor for the micro mobility for the two wheels and three wheels. The Munjan STP is our recent joint venture, which is in alloying metallics division. And this joint venture is for the forging and the machining facility for the global market. About 37% of our revenue, 38% of our revenue is in is from the global market, is from the overseas market and the rest is from India. If we talk majority of our business is in motorcycles, which is premium motorcycles in the global market. Performance cars like motorsports cars, Formula one, two, these kind of vehicles.

6:13 In electric bicycles, we work with a company called Enviro, where we make the complete continuous variable transmissions for the European market mainly. And we have very good market share in this company. And in the automotive segment, we work with a few companies globally, and majority of the business is in EV or hybrid solutions here. As we discussed, our Wi Fi powertrain solutions, we make motors, the complete system, electronic drive unit, which includes motors, controllers, battery, sensors, all put together. We design those systems, manufacture those systems in our group companies or maybe to our suppliers. We integrate everything together, test and validate together, and then we supply to the global market.

7:04 And the same way we do for the three wheelers also in L3, L5 category. In our transmission business, we work in component category, in the ESS category and the complete solutions also for the global market. And here, we work for in automotive, in performance automotive, in performance bikes segment and the aerospace. Our majority of the customers, if we talk, let's say, in our powertrain solutions, most majority of our business is overseas, and the business is in Europe, USA, and ASEAN, and some part of the business is in India. There is an alloy in Metallics, our business is primarily in India, and now we have some customers in global market, which we started two, three years back only.

7:56 So overall, you can say that in Powertrain Solutions, about 70%, 75% business is in global market. So we focus more on providing the complete systems rather than the components, and we focus on the design to cost solutions for our customers. We make our own design, and we make the design sometimes for the customer specific, which the customer asks us to make, or sometimes we make our own design for the products we manufacture and sell in the global market. And and those products, we sell in our own brands. In some of the important thing for us is that our our relationship with the customers and our partners, like, is one of our partners where we started manufacturing the CBD first time in the country, India.

8:49 And we have a majority stake, share of business in the global market now. And here, we are planning to... We already co develop the CVTs with the customer, which are already in the market in Europe. Since last two years. Yamaha is another joint venture partner where we started doing our motor manufacturing in the micro mobility segment. And STP Germany is another joint venture partner. Same way we have a partnership with the customers where we have very long lasting relationship with very prominent customers, marquee customers in the global market. When we say long lasting relationship, approximately you can say about maybe one decade to two decade relationship with them. And important thing is that in the last ten years, we have not lost any customer.

9:35 Whenever we started any project with any of the customer, maybe the project we started with one project, we run now various projects with the same customers. If we see that in last five years or six years, the majority of the business was in aligned metal, achieved metal components earlier. And if you see now in FY 'twenty six, which has a published result, you see majority of the business is in Powertrain Solutions. So most of the profits we earn is in Powertrain Solutions. Here, the margins are good. In Gas and Transmission business, we earn more than 20 EBITDA. In some of the project specifics, earn 25% to 26 or maybe 30% also in some cases.

10:20 And our line of Atlas, our EBITDA level is 6% to 7% overall. Biopower train business, which we started about in twenty eighteen, twenty nineteen only, is also significant portion of our business now. Last year, this was about 13% of our total revenue. As we discussed now, we focus more on systems versus the component. In twenty, twenty five years back, the system portion, the complete solutions, it was only 5%, six percent or maximum 7%. Now we do approximately... Majority of our business in the power train solutions is in system solutions. And, you know, we focus on the... In the global market.

11:09 In FY 'twenty six, more than 40% of our revenue comes from the global market. And if we see the powertrain solutions, approximately 75% of the business revenue comes from the global market. If we talk, let's say, the new development few new developments of the BD initiatives we have taken or are doing, one of the major initiative is that we are setting up a new facility in Bangalore, India, and this facility will focus on the EV system manufacturing. This facility, we are planning to establish in March or April 2027, and next year, we have a good order book already. We will ramp up this facility in one year time, and 'twenty eight, 'twenty nine, we can see a good sizable business from this facility.

12:00 One very good projects which we have got is Formula two program Formula two racing program, which we are now designing the complete transmission, fixed speed transmission, integrated starter system and advanced differentials for Formula two racing cars, and we will be starting supplying this end of this year. Similar projects we have, you know, we are working on is actually transmission, which is for premium, super premium, you know, cars. We are working on. We are designing the transmissions internally in our R and D facilities in UK and planning to do this in FY 2027, 2028. Marine application is again the target. Here, we have got some projects already. We are working, designing some of these transmissions and making the prototypes and testing and development.

12:52 We focus more on the businesses where we have the design to cost solutions as we said in the beginning. We make the design, we test, make the prototype test, validate and give to our customer. If the testing and validation is done, it's well fitted, then we take the manufacturing orders, and we try to do the manufacturing orders from the low cost country. Manufacturing of the major components happens in India, and and the final assembly sometimes goes to the customer. Like in in HERO type facility, we do the manufacturing of the gas sets in India, but we need the complete transmission inside facility and serve to BMW there. Same way, we we try to do, you know, the components manufacturing in India and then the final assembly group in UK also.

13:39 So one of the projects which we have got already is the design project where we are working for a European company and making the last mile mobility vehicles for them and the designing of the complete vehicle. We are focusing on EXL motors and other components from our subsidiaries and our suppliers in India. This project is one of the prominent projects. It's it's more or less like health pipe category in India, but it's very prominent projects for a global company in Europe. Same way, we are working for L3 and N5 segments in the Indian market, and we have got already some customers. These transmissions are designed co designed by the Indian R and D and the U. K. R and D, the complete differentials.

14:24 And we are serving already started serving some of the Indian customers. So if we talk, let's say, about our order book, approximately, as you can say, about INR 4,000 crores are the projects which are in the lifestyle. So we have one project which range from five years to about eight years. Approximately INR 4,000 crores is the lifetime revenue of those projects, which we already got. And we are developing those projects internally. So one project takes approximately one year time to two years time to develop and start supplying to the customer. So these are the projects where we already got the purchase orders for the confirmation from the customers, and we are now developing those projects internally and starting supplies to the customer. These projects amounts approximately INR 500 crores to INR 600 crores of revenue every year, which will sit on top of what we are doing.

15:21 Some of the quality awards like Ducati Holding, they gave us the best quality awards. Like River in India, they gave us best quality awards. Harley Davidson USA, they gave us a letter of appreciation for the work we did for their one of the project, LAMOTA. And these kind of projects are maybe export award by the UP government, one of the best exporter in the state. The leadership of our Board, as we shared that Mr. Pankaj Munjyal is our Chairman, and he has been guiding and very much involved in the strategy of the company. Mister Abhishek Munjal, who joined our board in 2020, he is the full time director from the Munjal family.

16:09 Mister Andrew Palmer, he is a board member, and he is the ex CEO of SM Martin. He advises on r and d projects to be taken. We make sure we focus more on r and d. Mister Ashok Kumar Panija, he's a veteran, and he's ex CEO of Piram Business. Mister Keshav Mishra, mister Sridam Narayan, they are, you know, from the PE industry, and they understand the financials. They are, you is IS, and from the... I think she's a professor and come from the academy background. And is from the bank background. So these people really support us at the board level.

16:59 In our management, it's very important to share that in our management, the top management level, average age of the people in the management is six to seven years in the company. Mr. Chandrasekar, he comes from HERO, our joint venture company. And since last five years, he's the CEO of Gas and Transmission business. Mister is there in the group since more than fifteen years, and he is the CEO of BiTE Powertrain business. He's the person who nurtured this business from scratch, you know, from 2018 onwards. And and in the current situation, this business is one of, you know, very important business for us and growing very very fast. Mister, he comes from HEROMOTORSYCLE. He's the CFO of the company. He was the CFO of HERO CYCLE and shifted recently here in HEROMOTORS.

17:46 Mister, again, he is CEO of Align Metallic business, and he will be responsible for HERO STP, Mundial STP joint venture also. Mr. Holger, he is the CTO of My Powertrain business reporting to Mr. Anil Rathi, who is the CEO of My Powertrain. He's a German national, but overall, he's a person who is guiding us and taking the R and D in India forward. Mister Ashish Narukula, not sure if he is there in the call. He is the strategy guy. He is working currently as interim CEO of He is in class three four years. He's there in UK. Agnes Agnes is group sustainability director, and she is working at a group at a group level for the global business.

18:35 Mister Sanjay Singh Suravanshi, he's vice president, business growth in HR. He is a person who is there in the group since last fifteen years and responsible for the subsidiary companies also. Now we have some financial details, which my colleague, Mr. Kush, would like to share with you. Thank you, Amit, and good evening, everyone. Let me now brief you on our financial performance for the quarter, quarter two of the current financial year FY 'twenty seven and also for the first half of the current financial year 2027. So starting with the quarterly performance. During the quarter, the stand alone revenues from operations grew by 27% year on year to INR $3.18 crores from a number of INR $2.51 crores.

19:23 EBITDA corresponding EBITDA increased by 35% on a year on year basis to INR 47 crores, with EBITDA margin also improving by almost 99 basis points to 14.4%. Profit after tax grew by 49% year on year to INR 24 crores, while the PAT margins improved by 112 basis points to 7.3% on a stand alone basis. On the consolidated front, revenue from operations grew by 21% on a year on year to INR $3.65 crores from INR $30.01 crores during the same period last year. EBITDA increased by 23% year on year to INR 47 crores, with EBITDA margin also improving by 22 basis points and leading the EBITDA percentage to 12.8% in the current financial year for the first half.

20:23 And the corresponding percentage of EBITDA for the same period last year was 12.6% approximately. Profit after tax also registered a very strong growth of 62% on a year on year basis to INR 18 crores from an INR 11 crores in the same period last year, with PAT margins also improving by 125 basis points to 4.9%. On from a business segment perspective, all the three segments contributed to growth. Alloy and Metallics revenues increased by 24% year on year to INR174 crores, Gains and Transmission grew by 16% on an year on year basis to INR142 crores, while Bike Powertrain recorded a strong growth of 27% on an year on year basis to INR 48 crores.

21:21 In terms of the revenue contribution, Alloy and Mechanics contributed to 48%, Gears and Transmission, 39% of the total revenues and Bike Powertrain contributed to 13% of our total revenues. So thereby, taking the total contribution in terms of revenue from the powertrain to more than 50%, approximately 52%. This similar percentage five years back was five, six years back was 8zero 20 between alloying metallics and powertrain. So powertrain being the more profitable division segment and our focus being more on powertrain solutions has improved from 20% to 52% as we speak.

22:07 From a product application perspective, EV and hybrid applications increased their contribution to a total from in the total revenues to 26% in Q2 FY 'twenty seven compared to 20% in the corresponding quarter last year, while ICE applications accounted to the remaining 74%. This increasing contribution reflects the expanding scale of our electric and hybrid powertrain business alongside our established ICE portfolio. Moving on to the half yearly performance. The performance for the first half of the financial year 2027, stand alone revenues from operations grew by 28% year on year to INR $5.96 crores.

22:56 EBITDA increased by 57% year on year to INR 92 crores, with EBITDA margins improving by two ninety two basis points to 15.2%. Profit after tax grew by 92% year on year to 47 crores for the first half of the current financial year, while TAC margins improved by two sixty one basis points to 7.8% on a stand alone basis. On the consolidated front, the revenue from operations grew by 23% year on year to INR $6.84 crores. EBITDA for the same period increased by 32% year on year to INR 87 crores, while EBITDA margin improving by 103 basis points to 12.5%.

23:49 Profit after tax also registered a strong growth of 84% year on year to INR 28 crores with PAT margin also improving by 136 basis points to 4%. From the product application perspective, the contribution of EV and hybrid solutions increased to 24% of the revenues in H1 FY 'twenty seven compared to 20% in H1 FY 'twenty six, while ICE application accounted for the remaining 76%. This reflects again, the growing contribution from our electric and hybrid powertrain business alongside our established presence in the conventional ICE applications. On a segment level, the gas and transmission grew by 15% year on year to INR $2.65 crores.

24:41 Bike powertrain grew by 37% in the first half of the current financial year to INR 89 crores. Alloying Metallics also registered a growth of 26% in the current first half of the current financial year to INR $3.30 crores. Moving on to the balance sheet. So on the balance sheet front, also, we have registered and strengthened our financial position with our debt to equity ratio improving significantly from 0.89x in FY 'twenty six to 0.21x in H1 FY 'twenty seven. This provides a greater financial flexibility to support our planned investments and future growth initiatives.

25:28 With this, broadly, I conclude my remarks. We remain focused on building our on our operational progress, strengthening our financial performance and creating sustainable value for all our stakeholders. Thank you, and we now open the floor for question and answer session. Thank you very much. We will now begin the question and answer session. If you wish to remove yourself from the question queue, you may press star and two. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while the question queue is assembled. The first question is from the line of from ICICI Securities.

26:19 You may proceed. Thank you. Thank you, team, for the detailed commentary. So my first question is on the. So in the slide, you highlighted that the total business pipeline is about INR 4,000 crores, which would get split over five to eight years and average annual revenue is about INR $5.50 crores to INR $6.50 crores. This is this order book. Wanted to get a sense on what is the... Are these orders confirmed or these are still under development? And if they are still under development, what would be the confirmed order book? And by when can we see the full ramp up on an annual basis? So roughly about INR $5.50 crores, 600 crores revenue. By when can we see that ramp up?

27:10 Yes. That would be my first question. See, when we say the product under development for INR 4,000 crores, it means that the product's orders are under I mean, confirmed or we have a high visibility of these orders. These products are under development at our end already for the confirmed orders. When we say five to eight years of the life cycle of any product we do and sometimes it's more also up to twelve years. It means that as and when the product is done, the complete development is done at our end. It's it's going for testing at customer end or at our end and then the final SOP start. It normally, you know, one year to two year time cycle. So out of this five hundred, six hundred crores of orders every year, you can see that partially will start anytime from now onwards.

28:01 Some of the orders, if we talk, let's say, very specifically, it could be about INR 100 to 150 crores of orders, which will start within this year. And some of the orders will start next year. But overall, annual size will be about and when it's a ramp up, it's approximately INR 500 crores INR 600 crores. Am I in position to finish information? Yeah. So so is it fair to assume that the full ramp up will happen or at least it will reflect from FY '29, if not later, either FY '28 or FY '29? FY 'twenty eight, we can see that more or less 100% of ramp up. In next year itself, in this year itself, there will be some ramp up, some orders which will be starting to execute.

28:47 And when you say that the visibility... Basis of visibility that you have, does that also mean that your customers have also invested in some of these pipeline business projects, and, hence, there is a good visibility? Is it fair to assume that that there would be a high probability that these orders will get confirmed? The timeline may vary, but it will get confirmed. Yeah. Yeah. Yeah. These orders are already confirmed by the customers, most of these orders. So definitely customer final products is under the NPD product development phase. And these products are some products are under launch stage, some products are undergoing to be launched, some products you know, shifting of the suppliers. So these kind of situations overall. But these all the orders are confirmed from the customer side.

29:38 Perfect. Okay. My second question is on the marine application order that you highlighted in one of the slides. Can you put some light on how critical is that component of the product? And what is the size of the order, who the customer given that you highlighted that this is a first supply contract in marine sector? So how significant or what is the overall addressable market for this? So how significant this can become more for the medium term? So see, we already started designing some of the transmissions or part of the transmissions for some of the customers in the marine sector. In fact, this is our second or third order in the marine application. This order is not that very big order. It will be approximately INR 5 crore to 6 crore of design fee, which we will charge for designing of this transmission.

30:32 But the order confirmed after the designing. If in some of the orders we have seen in the past that when we do the designing, we do very strategic projects. And if this order converts to the manufacturing order, the size becomes very For one of the orders, the size is very big already. So this kind of orders, the designing fees to the range of about INR 5 crores to INR 20 crores only. But later on, the size could be very big once we have the serial production order from these customers. Understood. And you would already be in engagement for manufacturing some of these components or products from India? Yes. Perfect. Okay. And my third question is on the facility.

31:17 So you've highlighted that you've leased this facility and for some of the customers, can you throw some more light on what would be the overall CapEx for this plant by what is the revenue potential of this plant and who would be the key comfort... Customers to whom you'll cater to from this time? Yeah. So next year, we are planning. We already have the orders, confirmed orders from the customer for this facility. And next year in 'twenty seven, 'twenty eight, we can say that approximately INR 60 crores to INR 80 crores of revenue we may do from this facility. And the INR 28 crores, 29 crores, we have very good visibility. Approximately, we can say about INR 200 crores plusminus 10% overall. And these are the confirmed orders from the customer as per the schedule given by them. A major customer is going to be a river where we are 100% supplier for the transmission systems they use for the electric bike, electric scooter, and we are going to make the chassis also for the electric scooters in this facility.

32:21 Okay. My next question is on the overall CapEx and debt. So what would be the CapEx outlook for this year and next year, total CapEx? And even for the debt and how should we think about the interest cost in the second half given that you have planned to pay off some of the debt through the IPO proceeds? Yes. So starting with the CapEx. So in terms of CapEx, we have been historically investing to the tune of almost like INR 125 crores to INR 150 crores in our growth business. Our gas and transmission segment is a CapEx heavy segment and also the most profitable one and also the highest royalty generating business.

33:11 So we continue to invest in that business. Our objects of the IPO, as per the objects of the IPO, we are using INR 200 crores of the IPO proceeds in the CapEx investments over the next two years this year, plus next two years. Other than that, there would be approximately 150 crores of CapEx more of maintaining the same average. And this mostly goes into the gates and transmission, the setting up of the new facility of STP. And the some of it would be in the pipe powertrain segment. These are the growing segments that we have. Moving on to the interest cost. So current interest costs are at a level of INR 8 crores to 9 crores per quarter, which has been the historical thing. We have repaid INR 190 crores of our loan, which was at approximately INR $4.10 crores. Now the loan stand at about INR $2.20 crores.

34:17 As per the August, we have repaid INR 190 crores. So we will save interest to that extent. And the existing now going forward, the interest rate will the interest cost will come significantly down to between INR 1.5 to 2 crores per quarter. Perfect. So one last question from my side before I fall back in the queue. Can you also highlight give an update on the STB facility by when can we expect that to commence? And what is the order book? And what could be the revenue potential of that facility over the next two to three years? So this is a new joint venture, which we started last year only. And we see that the manufacturing of this facility may start next year in 2027 calendar year.

35:11 And as of now, there are a few customers we are already in touch. This is for the global market. We foresee that approximately 70% revenue will go to the global market from global market and 30% from the Indian market. So our existing customers, mainly in Europe, like BMW and others, they are very keen to explore the facility and see the feasibility. But as of now, we are focusing more on the execution, machine ordering, construction, all those things. But I think overall, this company, FTP, if you see the customer portfolio of FTP, they are supplier to global OEMs and mainly Europe. And and this business is shifting for forging and the precise machining business is shifting to other countries, including India.

35:59 So that is, I think, a good opportunity for us to work on. Of now, order book is quite difficult to share. But overall, we are... You are investing about INR $3.50 crores, right, for this project? No, not only on this project. $3.50 crores is what is expected to be spent on CapEx in the growth business overall. This facility... But for this facility? Yes. In this facility, it would be in the range of around probably 50% of this amount, maybe 50% slightly lower also. Okay. And is it fair to assume that the asset turns will be somewhere around 1.5x, typically what we see in case of other four gs companies? Yes. Yes, that's right.

36:50 Thank you. Thank you. You. Before we take the next question, we would like to remind participants that you may press star and one to ask a question. The next question is from the line of Smith, an investor. Please proceed. Yeah. Hi, sir. Am I audible? Yes. Yes. Sir, congratulations on a good set of numbers. So my question is regarding the growth outlook. So we have grown at healthy double digits for H1. So what would be the outlook for the full year? And secondly, on margins, we have delivered well on margin front as well despite the commodity inflation. So how is the pass through arrangement for us with our customers? Is it quarterly, monthly? How does that work?

37:41 See, on the numbers from the growth part, we foresee more or less the same kind of growth. And the year, we have been thinking that we should be 20% plus in terms of revenue and EBITDA percentage will definitely be higher than the last year. It's very important to note here that the holding company, Hero Motors, which I think also highlighted, it's approximately we have earned approximately 15% EBITDA in H1 and that of about 8%. Whereas when we go to consolidation levels, EBITDA is 13%. It means the investment in the subsidiary companies, those are getting realized, and we are slowly, slowly moving up in those companies. The overall the losses in those companies are getting clubbed.

38:26 But overall, these companies some of these companies are getting converted into EBITDA positive in the next six months' time, which is very positive time for the company. And we see that once that happens, then overall, the profitability, you know, it looks very different, lucrative. So that is how how we see this as investment in the subsidiary company. And the next question was on the margins. I think the margins are going to be at EBITDA margins, we can say approximately 14%. Yes. So margins would definitely be following the trajectory that they have been following. And as of now, we can say that we have been in line with our internal targets.

39:13 We have kind of achieved, and we expect to be in line with our internal targets going forward as well. Okay. So my next question is regarding the gas transmission business by powertrain and alloy metals business. Which of these from these segments, which is that one segment that you are in your assessment as the highest opportunity to outpace the other segments in terms of growth? And are there more product developments or component developments that you are doing in each of these segments? These businesses, see, it's very difficult to say that, okay, which of these segments is doing better.

39:58 But if you see the gas and transmission business, the CAGR of this business over last five years is more than 30%. In the Bi Powertrain business, this is the newest business, but we already have about 13% revenue coming from there. In gas and transmission business, the thing is that we are already having good market customers globally. And we are growing consistently 20%, 30%, sometimes 40% also year on year, which is a good sign. And we are continue we have good order book in place already. And at the same time, we are also working on some new projects, which are not already in hand, but we are working on them as a strategy and which includes very high volume potential with some global customers or with some global partners.

40:45 So that is something which we are doing in gas and transmission. In BiPovocaine, it's a business which we established. Now we are already in our product lines, selling in Indian market and European market. Here, the capital output is not that high, like in case in transmission business. But here, actually, it's more the designing, R and D, which plays a very good role. So here also, we are working very good. In fact, last year in 2026, we have grown almost 50% in this business segment. And this year, again, we are in that line. So overall, we are doing good in these two segments, Powertrain Solutions. Alloying Metallics, our strategy is to go more into premium segment. So it may not be too much in revenue, but with the STP joint ventures coming it may increase the margins of what we are having in this business. Today, are having 6%, 7% EBITDA margin. And internally, we are aligning much higher than that.

41:49 Also to answer specific question, we are expecting the highest growth is in the Bi Powertrain segment because that's a newly established segment. This is in line with the EV segment, 100% of the product goes into EVs, which is a growing segment for us. Gas and transmission continues to be a very, very profitable segment, but it is a much established segment. And the bike powertrain segment is a growing segment. So highest CAGR is expected in the five power train segment. Okay. Okay. Thank you. I'll call back in the queue. Thank you. Before we take the next question, we would like to remind participants that you may press star and one to ask a question.

42:37 The next question is from the line of from TAM Capital. Please proceed. Hi. Congratulations on the good set of numbers, and thank you for the opportunity. I wanted to know that our new business of HERO Thailand and the EDU business, how it's going to get scale up in coming quarters? And any time lines and revenue potential of that businesses? So, you HERO, Thailand is a facility which we established for our anchor customer, BMW. We are in Thailand. And we are starting a new project. In fact, there is a customer team already in place this month. So we are starting that project maybe from January or February, this financial year itself.

43:30 And we are up to now, we were doing the sale from HERO, Thailand to BMW, Thailand. Now we are planning to do it in BMW, Germany also from Thailand facility. So that will scale up. It's a very one of the very good projects. We are also expecting some new orders in Thailand facility, which are not yet confirmed from the customers, which are European customers and American customers in Thailand. So we see good growth in this. Overall, next year, we see good profit in this Euro Thailand facility. In EDU, it's a new, as I think Utkash also shared, it's a new segment for us. The EDO systems, we started making from 2024, 2025 only. And then this year, we are doing good. In fact, we have already crossed the sales, which we did last year in the whole year, in the six month time.

44:21 Good order book from different customers. We are also developing some good products for the customers. So overall, this segment is expected to grow much higher than the other segments in terms of percentage of the growth. A good overall, we see approximately, you can say in EDU only approximately 80%, 90% growth like we did last year from three to 30 or 25 and this year approximately 70, 80? So again, to answer in terms of numbers, EDU started in FY 'twenty five when we did in late FY 'twenty five and we did approximately INR 2.5 crores of business in there. Last year FY 'twenty six, this business was INR 27 crores, so you can see the growth number.

45:09 This year, as Amit also mentioned, we have kind of already crossed the number that we did for the entire last year, so the growth is there. And this is in line with our internal plans as well. So that's the growth that we are projecting for this year. Okay. And my second question was that in the alloys and metals, our alloys and metallics segment, we saw very high growth of 24% year on year. So is there any one off or how should because the it is much higher than the industry growth rate. So how should we look into that? In alloy and metrics business, it was more or less the business for the domestic customers earlier three years back. And we added some new customers, new products in this segment.

46:01 And we also started some sale to European market. So that is the reason that we are growing in this segment. But overall, we see this kind of growth. Again, with SDP coming into this segment, the growth will definitely be higher and in line with what was there. Till the time SDP starts their production, the growth might we are not saying that the growth would be 24% every quarter on quarter. But yes, there will be growth, but the major growth will come once the FCC facility starts the production, the commercial production. Okay. And are we on track to commence the facility from Q1 FY 'twenty eight onwards? Or it will be any guidance on that?

46:50 This would slightly vary because when we had projected, we did not foresee the whole situation that was there in Q1 entirely. So it got slightly impacted, but we are committed to at least the time line, maybe slightly there, but we are there to see. Okay. Okay. Thank you. Thank you for your guidance. Thank you. You. Before we take the next question, we would like to remind participants that you may press star and one to ask a question. The next question is from the line of, an investor. Please proceed. Hi. Thank you for taking this opportunity.

47:37 I have couple of questions. First, on the margins front, your stand alone margins, EBITDA margins have improved significantly from 12.3% in H1 to almost roughly 15% in H1 FY 'twenty seven. And the consolidated margin remains at a similar level of 12, 12.5%. What are the key differences in the profitability margins between the stand alone and its subsidiary? And separately, are there any specific factors that affect the console margins as compared to your stand alone margins? So see, the stand alone margins, as the name suggests, have are margins of HEROMOTORS Limited, which is a steady state business for us, comprising of primarily latest in transmission, our legacy alloy and metallics and the CVT systems business, all those are established businesses.

48:38 While the subsidiaries on the consolidated front, there are subsidiaries, which have got newly established as we were discussing, the E Sync facility, the the HYM, they have recently come up. So they are in the growth phase. Amit also mentioned that we are on the path of making them breakeven. Maybe some of them would be breakeven probably in this year itself, while the others, we expect to achieve a breakeven mark in the next year. And there from the growth journey begins for the subsidiaries as well. So steady state, our stand alone margins, H1 FY 'twenty seven, even at FAT levels, we are close to 8%, 7.8% of FAT margins.

49:24 Yes, the margins on a consolidated basis are slightly lower due to these subsidiaries growing businesses. And they are witnessing the growth, and they are broadly in line with our, again, internal plans and estimates. Got it. Another question I had was on the manufacturing capacities and utilization levels on... Across the divisions, so G and T, PVT, A and M. Could you be able to provide me a breakup of the installed manufacturing capacities and utilization levels, current utilization levels? And what are the anticipated utilization levels or expect optimum utilization levels you would want to reach in these specific businesses? Yes. So broadly speaking, the gates and transmission, they operate at about close to 70% to 75% capacity utilization level.

50:24 Bike power train, there is a lot of room. We have done the CapEx. Now is the time to reap the benefits. So they are at fairly low capacity utilization levels, and that's how we are able to achieve the kind of growth that we have been achieving for the past two years and the first half of this year in BiTE Powertrain. Alloy and Metallics, again, operates at about 70%, 75%, maybe slightly more in one of our facilities at capacity utilization. This would, again, be slightly lower due to the STP coming in, in the next year initial phase. And once it ramps up, the capacity utilization would be at a similar level. Got One last question I have on the realization levels.

51:13 So I just wanted to understand what are the margins difference between system level product as compared to your individual components, if you could elaborate on that? See, the most important point is that when you supply the system, size of business is very different. Example, let's say, if you are buying a component, it is $10 component or $20 component. When you supply a system, it's raised from approximately $250 to, let's say, £50,000. You know? So that that is... It makes very, you know, big difference. And if you are designing the system also, it adds lot of margins in designing also. So it depends on project to project, but you can see that the margins are pretty higher in systems.

52:01 And overall, the capital output when you make the ROCE calculation, this is much, much higher. For the components, you need to set up all the facilities, everything, whereas for the systems, need a lot of value add is from the suppliers. The capacities are diverse. And overall, you are responsible for the final solution. Right. I know it depends on your different system level as for the designs and components, but is there any range if you could give between as compared to individual components as compared to to your system level products? Some difference in realization of We can compare here the alloying metallic business, where the margins are 67%, 8%. Whereas when we make the systems, the margins are to the tune of about 18% to 25%, that range approximately.

52:53 The next question is from the line of Dhruv Patel, an investor. Hello. Hello? Yes. Yes. You are. Thank you so much for the opportunity. I just had two questions. So as you are improving your product mix within the alloys and metallics business, so I just wanted to if you could elaborate on the investment and capacity expansion plans in the lightweight alloys and high precision forging? And what kind of margin improvement can these initiatives deliver? See, in Alliant Metallics, the capital output is good. And this forging facility, what we are establishing, the CapEx plan is over a period of three to five years. So initially, we are planning a CapEx of about $10,000,000 and it will ramp up slowly, slowly, in line with the business, the revenue we will generate. But overall, you can say that the margins in the forging business and the machining business is to the tune of about 15% to 20% EBITDA versus the alloying and metallics business currently at about 7%.

54:07 So it's pretty high, and it's more global business, and this business is more domestic business currently. Okay. Got it, And the second one is, could you share some light on what could be the long term sustainable EBITDA margin going forward? So talking about EBITDA margins, we have to look at EBITDA margins segment by segment. Alloy and Metallics, as Amit also said, is operates has been historically operating at around 6% to 7% EBITDA margin. However, now we are taking steps to improve the margin profile of this segment as well by bringing in the high precision forging into this business, which is typically a booking 15% EBITDA margin business broadly.

54:59 The gauge in transmission operates at about 23% to 25% EBITDA margin, and that also depends. If you're doing components, you'll get slightly lower margin. Our endeavor and our initiative has always been, and we have done that also from component level to a system level to design to bus. So that also improves the margin profile. So let's say we operated at about 2223% last year, and we expect with the design to cost solutions going in more and the systems level going in more, so steady state could be at around 24%, 25%. The bike powertrain is in a nascent stage. The PVT systems is established business for us, which we do with Enviolo, which is at about 17%, 18% margin EBITDA margin. Bike powertrain is yet to come up, but steady state, again, it would be similar kind of a margin in bike powertrain. So overall margin profile, we expect them to go up maybe by 100,200 basis points in future, not on immediate basis, but yes. And with the Powertrain Solutions business taking a higher pie in the overall revenue pie, the margin profile, the sales mix also comes into picture and the margin profile goes up.

56:19 Okay, sir. Got it. Got it. That's it from my side. Thank you so much, and all the best for the future. Thank you. Thank you. The next question is from the line of Rohit from Investments Insight. Please proceed. Hello? Can you hear me? Yes, please. So my question is, given the strong growth in scooter volume but relatively low market penetrations, what concrete state is your company should taking to increase its scooter market share from the current levels of 7.1% something?

57:05 And what is the medium term target for your company? We have not understood maybe your question very clearly. What we are understanding is maybe you... You're saying that why two wheeler business is having low margins. Right? Yes, sir. Yes. See, the two wheeler business for us, in different categories, in our powertrain solutions, what we do in two wheelers is mostly in the premium category for the European customers and American customers. And that business has really good margins for us overall. For the two wheeler business in India, we are primarily in alloy and metric business. And there, have some challenges, and we are working on this, how we improve that. And I think we shared also that we are making the strategy to, yeah, to do, you know, more global business, more reliant, you know, centric business, more, you know, the overall way we can have the better value add in the overall scenario. So that is what we are planning to do, and we are thinking that the margins will go up.

58:12 And if you see the last year versus this year itself, the margin has gone up in this particular segment. Have we been able to answer your question? Because, see, you have to not look at it only from a two wheeler or a three wheeler kind of a perspective. You have to bifurcate into segment. Gates and transmission segment, even the two wheelers in the case and transmission segment give us very good margins because we operate in the premium category there. Alloys and metallics, as the name suggests, is the machining and the painting and all of that business. So that's the nature of the business. It's not that we are running a lower margin. It's a low margin business.

58:58 But we are trying to improve the margin of this segment by bringing in the value added categories like the high precision forgings where the margins are higher. Thank you. That was the last question for today. I now hand the conference over to the management for the closing comments. Over to you, sir. Thank you. Thank you very much. So on behalf of Hero Motors, I thank you all for participating in this earnings conference call. I hope we were able to address your questions and provide you with useful insights into our business and financial performance at the same time. If you have any further questions or you would like to know more about the company, please reach out to us through our Investor Relations team at Valorum Advisors.

59:46 Thank you very much, and have a good day. Thank you. On behalf of ICICI Securities Limited, that concludes this conference. Thank you for joining us, and you may now disconnect your lines.

Follow Hero Motors Limited into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from Hero Motors Limited