Leanne Seavers
President, Shelton Group Investor Relations
Replay available
Diodes (NASDAQ:DIOD) Q1 2020 earnings call, held 2020-05-11. Watch the replay and read the transcript on 6ix.

On 6ix: 6ix.com/event/diodes-incorporated-diod-q1-2020-earnings-call
Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.
0:00 Good afternoon and welcome to Diodes Incorporated First Quarter 2020 Financial Results Conference Call. At this time, all participants are in listen-only mode. At the conclusion of today's conference call, instructions will be given for the question and answer session. If anybody needs assistance at any time during the conference call, please press star followed by zero on your touchtone telephone. As a reminder, this conference call is being recorded today, Monday, May 11, 2020. I would now like to turn the call over to Leanne Seavers of Shelton Group Investor Relations. Leanne, please go ahead.
0:35 Good afternoon and welcome to DIODE's first quarter 2020 financial results conference call. I'm Leanne Seavers, president of Shelton Group, DIODE's investor relations firm. Joining us today are DIODE's president and CEO, Dr. Kei-Shu Liu, chief financial officer, Brett Whitmire, vice president of worldwide sales and marketing, Emily Yang, and director of investor relations, Laura Merle. Before I turn the call over to Dr. Liu, I'd like to remind our listeners that the results announced today are preliminary as they are subject to the company finalizing its closing procedures and customary quarterly review by the company's independent registered public accounting firm. As such, these results are unaudited and subject to revision until the company files its Form 10-Q for its first quarter, 2020. In addition, management's prepared remarks contain forward-looking statements which are subject to risks and uncertainties and management may make additional forward-looking statements in response to your questions. Therefore, the company claims the protection of the safe harbor for forward-looking statements that is contained in the Private Securities Litigation Reform Act of 1995. Actual results may differ from those discussed today, and therefore we refer you to a more detailed discussion of the risks and uncertainties in the company's filings with the SEC, including Forms 10-K and 10-Q.
1:47 In addition, any projections as to the company's future performance represent management's estimates as of today, May 11, 2020. DAOs assumes no obligation to update these projections in the future as market conditions may or may not change, except to the extent required by applicable law. Additionally, the company's press release and management statements during this conference call will include discussion of certain measures and financial information in GAAP and non-GAAP terms. Included in the company's press release are definitions and reconciliations of GAAP to non-GAAP items, which provide additional details. Thank you, Deanne. Welcome, everyone.
2:47 and thank you for joining us today. I want to start by saying that I hope everyone and their family are staying safe in those unprecedented times for our economy and the world. Our top priority demands our people and DIOS has taken proactive measures to protect the safety, health and Will Means of our global associates. Our employees are successfully working remotely and remain in close contact with our suppliers, customers and partners.
3:35 Our first quarter's results were in line with our original expectation and included the today star of our manufacturing productions following the extended Chinese New Year holiday. Our result further reflected the temporary closure of our UK wafer fabs in the Nepal March in response to the global COVID-19 pandemic. Our operation in China has since gradually returned to full production, with our UK facility also receiving full production as of today.
4:29 Combined North America and Europe revenue grew more than 12% from 4Q to 1Q, while Asia revenue reclined 12% sequentially. because of certain expected customer manufacturing manpower recovery due to COVID-19. With revenue mean only slightly below typical seasonality and then limited only by customer demands. Our first quarter results serve as further testament to our long tracking record of successfully managing through challenging environments.
5:20 Highlighting the quarter was our continued growth in the automotive end market. In switch, revenue grew sequentially and year-over-year to 11% of revenue. As a result, our increased content gains across our expanded customer base, including are significant new design wins in Asia. Additionally, our Pelcom IC products have the second-highest revenue quotas since the 2015 acquisition. Due to strong demand in the computing and market for our products used in high-end servers, storage, data centers, and notebooks, Our close engagement with customers has enabled us to benefit from the increasing demand for roads and equipment applications.
6:28 The diversification and strength of our business and the long-standing relationship with customers continue to serve us well. as we focus on carefully managing those factors that are within our control. We currently expect to deliver second quarter revenue and margin slightly better than first quarter at the midpoint, which is notable given the increasing market uncertainty resulting from COVID-19. and the significant softness in the automotive market.
7:18 Before turning the call over to Brett, I would like to provide a brief update on our proposed acquisition of Dion Semiconductor. Since our last earning call, at the end of March, we received all required regulatory approval. from Taiwan Authority, including Taiwan Fair Trade Commission, and the Foreign Investment Approval from the Investment Commission of the Ministry of Economic Affairs. We also extend the outside date, including in the seal swap agreement from May 31, 2020 to December 31, 2020 to accommodate the diffuse schedule for the relevant Chinese authorities and associate operation process that would need to be completed.
8:28 The remains consistent with the previously communicated expected close date. With that, let me now turn the call over to Brett to discuss our first quarter financial result and our second quarter 2020 guidance in more detail.
8:56 Thanks, Dr. Liu, and good afternoon, everyone. As part of my financial review today, I will focus my comments on the sequential change. for each of the online items and we'll refer you to our press release for a more detailed review of our results as well as the year-over-year comparisons. Revenue for the first quarter of 2020 was $280.7 million as compared to $301.2 million in the fourth quarter of 2019. Gross profit for the first quarter was $95.8 million or 34.1% of revenue compared to the fourth quarter 2019 of $109.4 million or 36.3% of revenue.
9:42 GAAP operating expenses for the first quarter 2020 were $70 million or 24.9% of revenue and on a non-GAAP basis were $65.4 million or 23.3% of revenue which excluded $4.2 million of amortization of acquisition-related intangible asset expenses and $400,000 of acquisition-related costs. This compares to non-GAAP operating expenses in the prior quarter of $65.2 million or 22% of revenue.
10:29 Total other expense amounted to approximately $896,000 for the quarter. including $1.2 million of interest expense partially offset by $273,000 of interest income and $76,000 of other income. Income before taxes and non-controlling interest in the first quarter of 2020 was $25 million compared to $59.6 million in the previous quarter. Turning to income taxes, our effective income tax rate for the first quarter was approximately 18.3%. GAAP net income for the first quarter 2020 was $20.2 million or 38 cents per diluted share compared to GAAP net income of $47.2 million or 90 cents per diluted share in the fourth quarter of 2019.
11:26 The share count used to compute GAAP diluted EPS for the first quarter 2020 was 52.4 million shares. Non-GAAP adjusted net income in the first quarter was $23.9 million, or 46 cents per diluted share, which excluded net of tax 3.5 million of non-cash acquisition-related intangible asset amortization costs and approximately $300,000 of acquisition-related costs. This compares to non-GAAP adjusted net income of $33.8 million, or 65 cents per diluted share, in the fourth quarter 2019.
12:12 EBITDA for the first quarter was $52.9 million, or 18.9% of revenue, compared to $88.3 million, or 29.3% of revenue in the prior quarter 2019. We have included in our earnings release a reconciliation of GAAP net income to non-GAAP adjusted net income and GAAP net income to EBITDA, which provides additional details. Cash flow generated from operations was $53.7 million for the first quarter 2020. Free cash flow was $39.5 million for the first quarter, which included $14.2 million For capital expenditures, net cash flow in the first quarter was a positive $11.4 million, which includes a paydown of $16.6 million of long-term debt in the first quarter.
13:14 Turning to the balance sheet, at the end of the first quarter, cash and cash equivalents plus short-term investments totaled approximately $272 million. Working capital was $525 million, and long-term debt, including the current portion, was $80.7 million. In terms of inventory, at the end of the first quarter, total inventory dollars decreased $4.3 million to approximately $232.2 million, which reflects a $9.2 million decrease in finished goods and a $6.4 million decrease in work and process and an $11.3 million increase in raw materials.
14:00 finished goods inventory days was flat at 29 compared to fourth quarter 2019. Total inventory days increased slightly to 115 in the quarter compared to 112 last quarter. Capital expenditures on a cash basis for the first quarter 2020 were $14.2 million, or 5.1% of revenue, which is at the low end of our target model of 5 to 9%. For the full year 2020, we expect to remain at the low end of our target model. Now turning to our outlook, for the second quarter of 2020, we expect revenue to be approximately $283 million, plus or minus 3%.
14:47 We expect GAAP gross margin to be 35%, plus or minus 1%. Non-GAAP operating expenses, which are gap operating expenses adjusted for amortization of acquisition-related intangible assets are expected to be approximately 23% of revenue, plus or minus 1%. We expect net interest expense to be approximately $1.5 million. Our income tax rate is expected to be 18%, plus or minus 3%, and shares used to calculate diluted EPS for the second quarter are anticipated to be approximately $52.8 million. Please note that purchasing accounting adjustments of $3.2 million after tax for Paracom and previous acquisitions are not included in these non-GAAP estimates.
15:39 With that said, I now turn the call over to Emily Yang.
15:43 Thank you, Brett, and good afternoon. In the first quarter, revenue decreased 6.8% sequentially. POS revenue in Asia was down due to the impact of coronavirus in January and February, followed by a strong recovery in March. POS in both North America and Europe was up in the quarter. Distributor inventory in terms of weeks was slightly above our targeted range of 11 to 14 weeks. Both Europe and North America inventory days decreased in first quarter, and Asia inventory days increased due to the slower than expected in-customer manufacturing capacity recovery. Looking at the global sales in the first quarter, Asia declined 12% sequentially to 75% of the total revenue, and Europe and North America combined increased 12% over the prior quarter to represent 17% and 8% of the revenue respectively.
16:36 In terms of our end market, the industrial end market represented 26% of revenue, communications 23%, consumer also 23%, computing 17%, and automotive 11% of revenue. Now let me review the end market in greater detail. Starting with automotive, Bayou continued to gain market share in this end market, growing both sequentially and year-over-year to 11% of the total revenue. This accomplishment is even more noteworthy in the current backdrop of the market time decrease related to the COVID-19 pandemic. Our consistent growth in this market is a direct result of our content expansion focus and new design in design effort over the last few years, which most recently resulted in a significant new design in Asia during the quarter.
17:27 We also secured design in across a number of new products, including various MOSFETs, SASP, automotive-grade TVS, in motor controls, lighting, powertrain, and connected driving, including ADAS, infotainment, and telematic applications. With a rapid increase of electronics in today's highly connected cars, robust ESD protection is becoming increasingly more important. Our growing family of protection products offers high reliability and high-performance ESD protection for connected driving applications. Our portfolio includes CAN bus, line bus, Ethernet, and high-speed data line protectors that covers the full spectrum of connected driving.
18:12 Similar to last quarter, DIOS once again saw continued success with our proprietary SDR technology, suitable for a wide range of applications, including e-bikes. We also continue to build momentum over the last two quarters in our sensor business for broad applications, including deck-like open control, Side door control, proximity, and position detection. We also have success with sensors and switches for hands-free calling interface and powertrain control systems. Additionally, new design was secured for 5-volt LDO in ADAS camera CMOS image sensing applications. And for our newly released linear LED drivers used for automotive tail lighting applications. In the industrial end market, we continue to gain traction for MOS product with key applications like brushless DC motor and LED lighting using diodes SGT MOS technology for low power loss and normal density trench MOS technology for better safe operating area. Sales of our switching diodes also grow in the quarter, supporting numerous applications including light dimmer systems, industrial printers, and security systems.
19:26 Similarly, our rectifier being used in broad range of application systems assemblies to ensure strong luminous intensity of halogen lighting system to drive demanding mechanical automation system and heat pumps. With a rapid adoption of high speed interface across multiple industrial IoT and applications, ESC protections also becoming more important for this type of data links. BIOS data line platform features ultra low capacitance with the industrial-leading surge handling and ESD protection characteristics. This platform offers BASIC-class ESD clamping voltage performance while minimizing capacitance loading on the data lines. Also in the industrial market, design-wing activity for our newly released linear LED driver aimed at a straight lighting market was strong.
20:18 Additionally, we saw increasing demand for our newly introduced AC Offline dimmable product in LED bulbs for industrial and commercial applications. In the consumer market, we've seen growth for our DC-DC products, high-current 1M LDO family, protection products, an LED driver in the display, OLED TV, LED monitors, and TV backlight applications. Our protection products continue to expand our footprint with small size, innovative, super high surge performance protection platforms in applications like earphones, wearables, portable devices, TVs, and smart speakers. Also during the quarter, we continue to maintain our leadership position for USB Type-C solutions that are widely deployed in consumer applications, including tablets and gaming consoles. Our low switches are also gaining traction in mobile devices Notebooks and tablet applications. In addition, we have seen design info hall sensors in medical applications that cause oximeter as well as demand for zener diodes and rectify in home devices like consumer smoke and fire alarms, home irrigation, and garage door openers.
21:32 In communications, we are seeing new design wings for voltage reference products in power modules for telecommunication applications. including top-tier brands for 5G mobile communications. 5G continues to drive demand for PMOS and NMOS products to protect 5G RF amplifiers and large boost power in 5G-based power stations in order to save power consumption. We also continue to launch new MOS products leveraging our high-density process combined with miniature DFN and CSP packaging to meet the challenging space and power density requirements for this market. Similarly, our SBR and Schottky product continue to increase penetration of mobile and smartphone market by offering a thinner profile and compact dimension to enable significant space saving. Mobile phone functions such as conference calls, audio, VBUS, VBAT, and wireless charging continue to be key growth area for protection products.
22:30 For SASP, within the mobile handset market, We supported strong customer demand for our variety of products including our tiny DFM1006 package switching diodes and our ultra-low leakage diodes. We also supported numerous applications for fast and ultra-fast recovery rectifiers including those in the SOD123F package as well as our power diode 123 rectifiers. Lastly, in the computing market, we continue to gain increasing traction across our broad product portfolio. including for our Paracom IC products, which, as Dr. Liu mentioned, achieve its second highest revenue quarter as a result of strong demand for our products in high-end server storage, data center, and notebooks.
23:18 Specifically, we are seeing increasing demand for our use as the Type-C general switching protection product and signal integrity solutions for high-end tablets, laptops, and commercial docking stations. Our newly released family of clock generators and clock buffers that meet PCI Express 5.0 specifications are designed in major surfer and data center OEM worldwide. Additionally, our SBR rectifier Schottky product continue to be in high demand for DC fancy surfers and surfer power where diodes offer cost performance in high temperature operating environment. Our Schottky rectifier technology also continue to win new design in applications such as adopters, USB power delivery, and ATX power. These offerings are also being secured for higher breakdown voltage products for applications such as power over Ethernet, surfer power, data center, and power applications.
24:17 In summary, our first quarter results and second quarter guidance serve as a further testament to DIA's ability to manage through challenging environments. This quarter also further highlighted the success of our past design re-momentum and new product initiative over the past several years in the automotive market, specifically as well as our total solution sales approach with the addition of our Paracom IC product. With that, we now open the floor to questions. Operator. Certainly. Ladies and gentlemen, if you have a question at this time, please press star then 1 on your touchtone telephone. If your question has been answered and you'd like to remove yourself from the queue, please press the pound key.
25:02 Our first question comes from the line of Gary Mobley from Wells Fargo. Your question, please.
25:08 Good afternoon, everybody. Thanks for taking my question. Hope everybody's staying safe. I want to start out by asking about the linearity of bookings during the quarter and as well through the first half here of the second quarter. I appreciate the fact there's been a lot of moving parts and a lot of things you've had to navigate over the last four months. But have you seen any sort of recovery in your end markets here in the early part of the second quarter or are we waiting for some North American or European manufacturing facilities to open more fully? Any call you can give there would be helpful.
25:52 Okay. Hi, Gary. This is Emily. So let me address your question. So in the beginning of April, we definitely see strong backlog across all regions, including Europe and North America and Asia. I would say the second week of April, we definitely start seeing a change from the backlog situation and the booking situation for Europe and North America. We still see Asia pretty strong carry through the momentum. but definitely there's a slowdown for North America and Europe. I would say second half of April and also May. And this is exactly like what you mentioned. This is really due to some of the factory shutdown, you know, in North America and Europe that we've seen.
26:41 There are some schedule for the factory to resume, whether it's going to be, you know, what is the percentage and by when. that still we have to wait and see. But overall, you know, Asia we've seen the strength, but Europe and North America definitely are weaker than we expected.
27:03 Okay. And, Brett, I'm curious to know how much of an impact to gross margin underutilization and COVID-19-related inefficiencies, you know, How much did that influence course margin in the first quarter? And as well, how much of that is influencing your guidance for the second quarter?
27:25 Well, the biggest thing that impacted us in the first quarter was you had basically the time off for Chinese New Year, which is usually a week, ended up being more like two weeks. And so that was the biggest impact we had in the first quarter. And I think we'll see that recover consistent with –
27:44 Well, the first quarter, not just the Chinese New Year today. And actually, another problem is the people return to work slower than the previous several years. You know, previous several years, when the Chinese New Year people returned to work, The first week we probably get 50% of people come back. Then, you know, probably 60, 70. In about one month, you almost get back to normal productions.
28:30 But this year, due to the quarantine of the people, so when they started in February 10, other than people from If they return to work, they cannot really report work. They need to quarantine for 14 days before they can report work. So when people take as long as possible, after February 10, they cannot report work. And then all the workers we have from Wuhan or Hubei province, they cannot even return to work. Therefore, when we start in February 10, in the first week, only like 30% instead of 50% of the workers come back. It takes almost until end of March to get all the people we supposedly have to fully report to work.
29:41 So this is Much worse than the previous several years of the first quarters. And therefore, our capacity utilization, or I should say our negative PV due to unloading is much worse than before. That's why our GP is lower than before.
30:16 Okay. And Dr. Liu, I didn't quite catch everything you said about the Penny Lino acquisition. Correct me if I'm wrong, but we're just waiting for final approval from China. And so did you comment that you expect the acquisition to close at the very end of calendar year 2020 or within... Your previously disclosed window of the second half of this calendar year.
30:44 What we expect is during the second half of 2020 to close in the light on acquisition, Gary.
30:50 Yeah. There are two days. One is called the outside day. And typically, outside day means if you bypass that, no deals. Okay, so we set it outside that originally is in May. We now set it to end of December. But that's not what we expect to the closing date. The closing date we believe now is somewhere in the 4Q or, you know, we set it now is the, you know, 4Q. Okay, so that's Thank you. Our next question comes from the line of Tristan Guerra from Baird.
31:49 Your question, please.
31:51 Hi, good afternoon. What is your expectation? Hi, can you hear me? Yeah. Great. What is your expectation for point of sale in Q2, and how do you see inventory levels changing at this stage? Do you expect the trailers to reduce inventory levels, and as such, the POS will be actually above the POP for which you just guided? And what also will be the implications for Q3 if there is some inventory deleveraging in Q2?
32:28 Well, I'll let Emily to answer you the POS questions.
32:34 Right. So, Tristan, I think overall we still expect Asia would have a good momentum for Q2 because we actually see the strength both from the backlog in Burkina as well as the POS point of view. The big question is really North America and Europe. We're definitely seeing some slowdown. It really depends on how soon the end customer factory recoveries. would happen. And so I think, you know, we definitely included everything that we know already into our guidance. And so, you know, our guidance is actually better than, I think, most of our peers, as you can see. So that's really based on the knowledge that we have. But inventory days that we definitely continue to monitor closely, and our ideal range is 11 to 14 weeks, and that is still continue to be Our goal, you know, a lot of times the last few days of the quarter kind of dynamically changed the situation, but that still remained a goal.
33:38 I think, you know, it really depends on the recovery of the market and a little bit higher inventory, you know, definitely can help us with faster lead time and, you know, short delivery, quick turns as well. So we've seen benefit of that. I think for Q3, you know, it's kind of difficult to estimate at this moment and we are not in the position to provide the guidance. But in general, we definitely hope the market will start seeing some recovery in Q3.
34:14 Okay, great. And then given the continued market share gains that you've experienced in automotive, Would you say that the automotive end market in China, which I think may be around 40% of your total automotive exposure, has that stabilized quarter on quarter, or is it still declining sequentially from a unit standpoint, so not your dollar content, but actual automotive units in China?
34:47 Right, I think overall automotive unit definitely declined, not only in China, right? That's overall the market. So we've definitely seen that as well. So our automotive game market share, like I mentioned, is really focusing on the contact extension and also past few years on the demand, design-in, design-win effort, and we started seeing some results. So Mark is one thing, our content is the other thing. So that has been the philosophy and focus for DIOS is really continue to expand on the demand creation, continue to expand the sockets, right? So yes, you're right. We overall are seeing the demand decrease from the unit point of view, not related to DIOS, and that's really how we've been focusing on is really, like I said, content expansion.
35:41 and also releasing quite a number of new product targeting in this area continue to drive the technology improvement as well.
35:49 So even in automotive market, you know, slow down a week quite a lot, but we still year over year and quarter over quarter our revenue still grow. That's really very good compared with our peers because we are able to accomplish that due to the past design win, past customer engagement.
36:20 Great. Thank you. Very useful. Thank you. Once again, ladies and gentlemen, as a reminder, if you'd like to ask a question at this time, please press star then 1. Our next question comes in the line. Tianyan Golner from Sudoti. Your question, please.
36:37 Yeah, thank you for taking my question. So first one, just on the clarification, well, a little bit color on OPEX. So it looks like R&D and SG&A also came a little bit higher, you know, percentage of revenue compared to the most recent quarters. So I'm wondering how much of those increase was driven by the, you know, just the coronavirus increase. What else drove the increase and how should we think in the near future?
37:08 I think our IMD and SG&A actually in the fourth quarter last year compared with third quarter last year actually dropped 5 or 6 percent, right? So 5 or 6 percent. And that's because 4Q... is the holiday in US and Europe the Christmas holidays and then you go to 1Q we are almost in a flat between 4Q and 1Q and that 4Q and 1Q is in Chinese New Year so Asia expenditure for R&D SG&A is slow down but US, Europe is up so they are They are about totally 4Q to 1Q is above that.
38:05 And therefore, we don't really expect that go to 4Q, we think it will slightly going down because all the traveling, retraction, normal, and most of people working in U.S. and Europe, most of the people working from home, but Asia, they can travel, but we don't encourage them to travel. Okay, so we believe the traveling expense will go down some, but we don't expect a major reduction on operational expense, R&D and STMA.
38:56 Okay, thank you. and probably the next one, just some color on the industrial. Emily, if you can help me to understand. It looks like industrial really, I know the general market is weak, but can we just talk about how should I think about for 2020 and just some color would be very appreciated.
39:22 Okay. Okay. So I think overall, just like you said, right, industrial overall segment is actually a down segment. So it's similar to our automotive segment. Overall market is down, but we have been continuing to focus on demand creation, driving the compact expansion, design in, design when effort is actually in the past few years helping us to continue to increase the revenue in this market. So I think there's definitely different segments within industrial. I think the key is really continue to focus on the expansion of the content. If we have more parts selling to the same customer on the same application, and that's really where we actually gain the revenue improvement.
40:10 Okay, thank you. That's for me here. Thank you. This does include the question and answer session of today's program. I'd like to hand the program back to Dr. Keshulu for any further remarks.
40:24 Thank you for your participation on today's call. Operator, you may now disconnect. Thank you. And thank you, ladies and gentlemen, for your participation in today's conference. This does include the program. Everyone have a great day.
Follow Diodes Incorporated into a list and get an email when it puts out news.
President, Shelton Group Investor Relations
President and CEO, Diodes Incorporated
Chief Financial Officer, Diodes Incorporated
Vice President, Worldwide Sales and Marketing, Diodes Incorporated
Analyst, Wells Fargo Securities
Analyst, Robert W. Baird & Co.
Analyst, Sudoti