Emmanuel Lakios
President and CEO
Replay available
CVD Equipment (NASDAQ:CVV) Q2 2022 earnings call, held 2022-08-15. Watch the replay and read the transcript on 6ix.

On 6ix: 6ix.com/event/cvd-equipment-corporation-cvv-q2-2022-earnings-call
Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.
0:00 Greetings and welcome to the CVD Equipment 2022 Second Quarter Results Conference Call. At this time, all participants are in a listen-only mode. A question and answer session will follow the formal presentation. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. As a reminder, this conference is being recorded. We will begin with some prepared remarks followed by a question and answer session. Presenting on the call today will be Emmanuel Lakios, President and CEO and member of the CVD Board of Directors, and Thomas McNeil, Executive Vice President and Chief Financial Officer. We have posted our earnings press release and call replay information to the investor relations section of our website at www.cvdequipment.com.
0:54 Before I begin, I'd like to remind you that many of the comments made on today's call contain forward-looking statements, including those related to future financial performance, market growth, total available market, demand for our products, and general business conditions and outlook. These forward-looking statements are based on certain assumptions, expectations, and projections and are subject to a number of risks and uncertainties described in our press release and in our filings with the SEC, including but not limited to the risk factors section of our 10-K for the year ended December 31, 2021. Actual results may differ materially from those described during this call. In addition, all forward-looking statements are made as of today and we undertake no obligation to update any forward-looking statements based on the new circumstances or revised expectations.
1:50 Now, I would like to turn the call over to Manny.
1:55 Thank you, Diego. Welcome to our CVD Equipment Corporation's quarterly conference call. My name is Emmanuel Lakios, CEO and President, and I am pleased to be presenting to you today regarding our second quarter 2022 performance and important company developments and pertinent information related to our business. While we will be providing substantive information, your thoughts are important to us, and we look forward to your questions at the end of our conference call in the Q&A session. The first half of 2022, as we previously indicated, has been an exciting period for all the stakeholders of CBD equipment. The order rate for the first half lends support to our belief that we are on the path to future profitability and growth.
2:40 Our strategy of focusing on markets that support the electrification of everything is fueling our present growth. The market segment includes electric vehicle battery technology, as well as high-power electronics for charging and power transmission. Our Q2 2022 orders were 12.6 million compared to 5.8 million in Q1 of the prior year. In the first half of 2022, we have received orders exceeding $16 million for our CBD equipment products as compared to approximately 9.6 million for the same period in 2021. That is a 72% year-on-year increase in orders for the company. These orders primarily consisted of 21 First Nano CBD systems compared to 23 systems orders for all of 2021. Of the 21 system orders, 14 are for a recently announced PVT150 system addressing silicon carbide growth and processing.
3:50 Two were for superconducting tape applications. and the remainder of the system orders are for battery nanomaterials, both R&D and production. Advanced carbon-based capacitors and for a legacy advanced R&D first nanosystem. The systems are planned for shipment starting in the fourth quarter and into 2023. We also received orders for consumable and spare parts that serve our installed base in the aerospace market. We have taken the last year to expand our engagement with additional gas turbine engine manufacturers for systems to produce ceramic matrix composite materials. This is a sign that the aerospace market is beginning to recover.
4:37 However, we do not expect it to recover until at least 2023. Our SDC product line also had an increase in order rate in the second quarter. Supply chain issues continue to negatively impact our revenue and profitability for all the segments of the company. The COVID pandemic and geopolitical instability in Russia, Ukraine, and Eastern Europe have caused issues in the global supply chain. The negative effects have been felt by all companies with increases in commodity and product material costs, as well as in product delivery uncertainty and unpredictability. We continue to drive towards operational self-reliance.
5:23 We received and installed additional machine centers in our central ISOC facility to offset supply chain issues related to machine components. We also are working closely with our OEM supply chain to mitigate as much as possible the delays and price escalations in components and materials. I would like to now introduce our CFO, Mr. Thomas McNeil, who will provide our second quarter and year-to-date 2022 financial summary.
5:57 Thank you, Matty, and good afternoon. CVD's revenue for the second quarter of 2022 was $5.8 million as compared to $4 million for the second quarter of 2021, an increase of $1.8 million, or 44%. Net loss for the second quarter of 2022 was $0.8 million, or $0.12 per diluted share, as compared to net income of $1.5 million, or $0.22 per diluted share in the second quarter of 2021. However, that quarter included a $2.4 million gain on debt extinguishment from the forgiveness of CBD's PPP loan.
6:42 CBD's operating loss for the second quarter of 2022 decreased by $0.2 million to $0.9 million for the second quarter of 2022 as compared to an operating loss of $1.1 million for the second quarter of 2021. This decrease was a result of increased revenue of $1.8 million and the resultant improvement of gross profit margins of $0.4 million offset by increased operating expenses of $0.2 million. The increase in gross profit and gross profit margins was primarily the result of leveraging fixed costs on higher sales levels and our improved product mix, which offset certain component cost increases and compensation costs.
7:35 In addition, operating expenses increased due to higher employee-related costs to support our greater demand and Mark Schroeder. For the six months ended June 30, 2022, revenue was $10.5 million as compared to $7.4 million in the same period in 2021, an increase of $3.1 million or 41.4%. Net loss for the six months ended June 30, 2022 was $1.8 million or 27.4% for the six months ended June 30, 2022. and others. CVD's operating loss decreased by 0.8 million to 1.9 million as compared to an operating loss of 2.7 million for the same period in 2021.
8:54 This improvement was the result of increased revenue of 3.1 million and the resultant improvement of gross profit margins of 0.8 million and decreased operating expenses of 0.1 million. The increase in Gross Profit and Gross Profit Margins was primarily the result of leveraging fixed costs on higher sales levels and improved product mix, which more than offset certain component cost increases and compensation costs. Beginning in Q3 2021 and continuing to date, CVD has been impacted by increased costs on certain manufacturing material components as well as delays in supply chain deliveries. These increases in delays may also impact CVD's ability to recognize revenue and result in reduced gross profit margins in future quarters, extended manufacturing lead times, and reduced manufacturing efficiencies.
9:54 CVD is also seeing inflationary effects that have resulted in increased costs for labor materials. We have placed orders with increased lead times to attempt to mitigate the manufacturing delays and continue to assess other material suppliers in an effort to alleviate the potential cost impacts. In addition, CVD is utilizing its flexible in-house manufacturing to further mitigate potential delivery delays and material cost increases. Now turning to our backlog. Our backlog at June 30, 2022 was $16.7 million. as compared to $10.4 million at December 31, 2021, an increase of $6.3 million, or 60.5%.
10:49 This increase is due to the timing of the receipt of new orders for the six months ended June 30, 2022 of $16.7 million, reduced by recognized revenue of $10.5 million. While the negative effects of the COVID-19 pandemic continue to impact the aerospace industry, generally in the form of reduced long-distance travel and reduction of turbine engine sales, industry reports indicate improvement may begin to occur in the late 2022-2023 timeframe. I'll turn to our liquidity. Our cash and cash equivalents at June 30, 2022 was $12.2 million as compared to $16.7 million at December 31, 2021.
11:43 This decrease of $4.5 million is primarily the result of the satisfaction of our mortgage debt on our 555 facility in the amount of $1.7 million, as well as our net loss adjusted for non-cash items of $1.3 million during the six months and to June 30th, and our capital expenses of 0.5 million to improve our manufacturing to further mitigate potential delivery delays and reduce costs. Our working capital was 15 million at June 30th as compared to 16.7 million at December 31st, 2021, a decrease of 1.7 million or 10%. The longer term impacts from the COVID-19 outbreak are highly uncertain and cannot be predicted, especially now with the impacts on a supply chain as we previously discussed. While we have initiated actions to mitigate the potential negative impacts to our revenue and profitability, there could be no assurance of the ultimate impact in the length of time period that the supply chain factors may impact our business.
12:55 Our return to profitability is dependent upon, among other things, the substantial completion and delivery of existing orders, which include the significant first half of 2022 orders of approximately 16.7 million, the ongoing receipt of new equipment orders and others, the lessening of the ongoing effects of the COVID-19 pandemic on our business and the aerospace market, managing through the supply chain issues discussed, and improvement of operational efficiencies as well as managing planned capital expenditures and operating expenses. Based upon all of these factors, we believe that our cash and cash equivalent positions and projected cash flow from operations will be sufficient to meet our working capital and capital expenditure requirements for the next 12 to 18 months of the filing of our Form 10-Q should the current environment continue longer or worsen We will continue to assess our operations and take actions anticipated to maintain our operating cash to support the working capital needs.
14:03 I'll now turn the call back over to Matt.
14:07 Tom, thank you for your presentation. In summary, the second quarter and first half of 2022 have built on our efforts of 2021, which were and which was a year of transition, reorganization and focus on everything we do and those who we serve. Our focus remains on our customers, markets, employees, shareholders and the pursuit of growth and return to profitability. We look forward to the second half of 2022 and continue to be cautiously optimistic. Your comments and questions are important to us With the close of our presentation, I'd like to open up the floor to your questions.
14:54 Diego. Thank you. And if you'd like to ask a question at this time, press star 1 on your telephone keypad. A confirmation tone will indicate that your line is in the question queue. You may press the star key followed by the number 2 if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. Once again, to ask a question, press star 1 on your telephone keypad. We'll pause for a moment to poll for questions.
15:30 Thank you. And our first question comes from Brett Rice with Jannie Montgomery Scott. Please go ahead.
15:48 Hi, Manny. Hi, Tom.
15:51 Good afternoon. Hi, Brett. How are you?
15:54 Good, good. Just a headcount question, you know, in the amount of employees this quarter versus last quarter, and are you looking to hire more? More people or is your headcount pretty much where you want it to be?
16:15 Clearly with the order rate as strong as it's been, we've added additional capacity in our manufacturing floor. We've gone to a second shift in our machine shop. Again, that's part of this self-reliance. So we've added folks in the machine shop, in inspection, in welding, assembly, wiring. Those have occurred during this year. As you remember, in 2021, we went through a pruning exercise and right-sizing the organization for the business level. We continue to right-size the business. We've increased our staffing approximately 15 to 18 personnel there and about during this year.
17:04 and were you able to find the people with the proper skill sets, you know, at the right, you know, labor costs or is that challenging?
17:15 The right labor costs, I mean, that is, you know, I would say there's a lot under that watermark. We are finding we're able to attract talent both in our engineering and also operations. We're very pleased with this that we brought on board this year. And it is in line with our ongoing labor costs here on the island. So I would say, yes, it's been positive for us. You know, it's not a slam dunk, but we've also brought on, one of our hires was a new HR director, and she's just done a wonderful job being able to do and conduct talent acquisition over the last several months.
18:06 Right, right.
18:08 Now that's good to hear.
18:10 Now the things you're doing in-house, to mitigate supply chain issues. If the supply chain issues receded and abated, would you still continue to make the things you've taken in-house and would that going forward improve margins?
18:35 So the company has, interesting that you say that, yes, it will improve margins because obviously we don't pay somebody else's gross margins. and the company has historically been a very vertically integrated house primarily because it was doing many one-offs and it was more cost effective to do that. What we found is our investment in some capital equipment this year has allowed us to elevate our level of excellence in machining So that's capability. Couple that with going to a second shift has allowed us to do additional capacity.
19:21 I would anticipate that we will continue doing that in that it does greatly support our competitiveness in this marketplace. Do I see the effect of the supply chain going away in the next three, six, nine months? My Crystal Ball is as good as anybody else's. I think we've wisely invested. The equipment is installed and all of it will be operational and producing value by the end of this month. So yes, there is a gross margin benefit. Yes, there is a competitive advantage. We can deliver product in much shorter periods of time. I would say that one example is our PVT-150.
20:10 We received orders back, if you remember, in December, late December. We have already shipped several of those in approximately six months. That's world class, and I compliment the entire team, both engineering and manufacturing, for that. So, yes, there's an advantage. Yes, we'll continue to do that.
20:36 Great. Now, one last one. In the virtual annual meeting, you listed three types of different devices that you manufacture with respect to battery technology. A carbon 300 machine, a powder code 1100, and then the PBT 150, which It seems to have become the crown jewel. Can you just briefly, to this layperson who's not an engineer, tell me what each of these devices do, and that's part of the $300 million total addressable market you mentioned at the annual meeting?
21:34 Yes. So it is, and it's the electrification of everything. It's not entirely due to, it's not battery material per se, all three of those applications. The Carbon 300 was launched early in the year and we've gotten multiple orders for that. It was launched the latter part of 2021. And we launched being delivered to customer, and we've had multiple orders for those. And that is for advanced carbon technology used in the battery, carbon nanotubes per se, exactly. The Powder Coat 1100 is a coating system that this one specifically was for growing silicon nanowires on carbon powder in an evolutionary enhancement of the carbon material used in the anode of batteries.
22:37 And the PVT-150 is a product utilized to grow silicon carbide rules for silicon carbide wafers used in power electronics, both charging and also for transmission switching. It's referred to as high power electronics. So each of those are different products, different technologies. Some are carbon based, some are silicon nanowire based and very large production systems. Others are silicon carbide growth systems using different techniques. But all those, and I appreciate you asking the question, all three of those are products that we've launched or standard products that we hope to become standard in the marketplace that we've launched over the last several quarters.
23:34 Now, how proprietary in nature are these three products and what are the barriers to entry to competition and is your major competitor Your customer who might want to do these things in-house?
23:57 Our customers manufacture them in-house. The world has really gone away from that. When you look at the competitive nature of our products, there is the element of the process capability, the ability to reach temperature, control the temperature, to be able to deposit at certain rates, be able to have a certain capacity. to be able to do that in a safe environment and in a safe manner and way, which goes into much of our environmental health and management elements that go into the design of our products, the control aspects, the production worthiness. And then that's really from the technical performance of the tool set. On the flip side, you also have cost of ownership.
24:45 The capital cost, the ability to manufacture these more, and that's your previous question, more efficiently and have a proper gross margin to invest in future products and return for our investors, as well as providing the right value to our customers. That's where we couple all those elements together. That's how we create our barrier to entry against our competition.
25:15 Great. Thank you for answering my questions, and both of you enjoy the rest of the summer.
25:22 Thank you, Brett. You as well. Thank you. And just a reminder to everyone, if you'd like to ask a question at this time, simply press star 1 on your telephone keypad. To remove yourself from the queue, press star 2. We'll pause for a moment while we pull for questions. Thank you. And next question comes from Shai Dadashti. Please go ahead.
25:58 Hi, good afternoon. First, a comment. Thank you for hosting this call. Thank you for your transparency and your candor. It all very much is very much appreciated. So thank you above all else.
26:08 Appreciate
26:10 it. You're welcome. Thank you. And I have a few questions just to better understand what I think I'm seeing. could you comment if the growth has been market share gains or it's been industry growth in general?
26:30 It's quite honestly, it's both. It's demand on new technology for both carbon, for silicon nanowires, for the battery material that is, and also for for Silicon Carbide. So from that perspective, it's market expansion. But there are other competitors in the marketplace that we won these orders from. So there is a, we did carve out more market presence and market share in the last few quarters. So it shines a bit of both.
27:20 and I've been looking at the 10, please don't comment. Are there any competitors who you can name as being peers or being benchmarks for their growth rates and their margins?
27:33 Well, there are companies that we would say are, we want to target our performance, but they're not competitors of ours. They're much larger companies. As far as our direct competitors, who you likely would not want to advertise who those are on this call.
28:00 And just I hope this is sort of in a different direction, but I noticed an article in the Wall Street Journal published October 24th, 2016. Germany withdraws approval of Chinese takeover of Ekstron or Ekstron. I'm wondering if this Thank you very much.
28:43 Going back to 2016 and the whole Axtron issue there that they had, sometimes I can, I'm not sure I remember what I had for breakfast, so I can't comment on that one, but I can say that there is clearly an initiative for both battery manufacturing and also for associated electric vehicle and electrification of everything and many, many, many, many, many, many, many, many, Supply chain issues.
29:45 Supply chain issues. Our, you know, we, simple answer. It's having a, and most equipment companies, if not all equipment companies, are suffering with the same.
30:09 Wonderful. Thank you so much. Thank you. You're welcome. Thanks for your questions. And our next question comes from Morton Howard. Please go ahead.
30:21 Hi. Thank you. I remember asking before about the health product in Stony Brook, and you said it wasn't that big a deal. It may come, and I don't get excited about it. I thank you for downplaying it. Has it gotten any closer to being a potential commercial product?
30:41 Martin, thank you again for your question, and I greatly appreciate it. Let me say that even though we are not a medical device company, we are an equipment and carbon technology and other process technology company, we do continue to have... and applications development, such as the device that you're referring to now. When we say downplay, we don't emphasize it. We try not to downplay much, but we don't emphasize certain things that are not part of our business. But we have received some government funding to continue our carbon technology development, our carbon carbon, that is, technology development, for such devices.
31:40 So in the background, we continue to do R&D. I want to just really underscore a lot of research. It's not a development. It's not a product. But we are continuing and we have gotten some external funding for that specific and the rest of the world. So, I think that's a really good application to use our carbon-carbon technology in.
32:08 Well, I thank you for giving us realistic expectations. So, I asked you before, what is the dream? And it sounds to me like the dream is what you're using this new phrase, the electrification of America. It sounds a little like something Trump might come up with, but be that as it may. So, that sounds, is that sort of the area, more of, go ahead, I'm sorry.
32:33 It's an expanding – yes, thank you again. It's an expanding marketplace. It's a large market. It's an expanding market. It's somewhere where we can clearly carve ourselves a good position, a good market share. We also have – I mean, we have not – we still support aerospace, as I mentioned, but and I do believe aerospace will come back. I do like the ASPs on the aerospace products. Multi-million dollar tools and different complexity of course. Solid recurring revenue on the production consumables and spare parts as we add value to them in that area.
33:27 I believe having our hands in multiple growth markets and large markets is the future of the company.
33:37 Well, as a stockholder of 15 years, I've had various amounts of stock, and I appreciate the fact that you're not BSing us. You're being realistic and optimistic both, and I appreciate it. So I thank you for your thoughts. I appreciate it. Bye. Thank you. We have another question coming from Shai Dardashti. Please go ahead.
34:06 Hi. At a high level, as a company becomes profitable at some point going forward, I'd love to appreciate how the company thinks about capital allocation. Do you have any thoughts about repurchasing shares at a price that's compelling versus doing strategic M&A just how you think about those different buckets from your point of view.
34:30 I can't say we've spent a lot of time thinking about repurchasing shares. We spent quite a bit of time looking at both organic and inorganic growth for the company. As you clearly stated, as we continue down the path of getting to profitability, I think those become more frequent discussions on how do we grow the company long term, medium to long term. But for the moment in time, we have our organic products and we've just launched these products. They're in what I would term the alpha-beta phase and we still have work to do there and we are, for the first half of this year, excited about The booking rate of $16 million compared to last year, if I remember correctly, which I do, we did approximately $21 million.
35:32 So far, our strategy of focusing on internal growth and profitability works. And I think I answered the question on the capital nature and repurchase and M&A. We have nothing to really report on right now. Thank you. Thanks, Sean. Good questions. Thank you. There are no further questions at this time. I'll hand the floor back over to Mr. Lakios for closing remarks.
36:12 Well, I appreciate all the questions. In summary, the second quarter and first half 2022 have built on our, again, on our efforts of 21. We greatly appreciate the support of our shareholders, our employees, of course, our board of directors and suppliers, and of course, value our customers. We thank you for your attendance today. and we look forward to giving you further updates in the next period of time. Thank you. Thank you. That concludes today's conference. All parties may disconnect. Have a great evening.
Follow CVD Equipment Corporation into a list and get an email when it puts out news.
President and CEO
Executive Vice President and CFO
Analyst, Janney Montgomery Scott
Investor
Long-term Shareholder