Replay available

Automotive Axles (NSE:AUTOAXLES) Q2 2027 Earnings Call

Automotive Axles (NSE:AUTOAXLES) Q2 2027 earnings call, held 2026-11-13. Watch the replay and read the transcript on 6ix.

Fri, November 13, 2026 at 8:02 AMendedReplay
Automotive Axles (NSE:AUTOAXLES) Q2 2027 Earnings Call
Company
Automotive Axles Limited (NSE:AUTOAXLES)
Period
Q2 2027 earnings call
Date
Fri, Nov 13, 2026, 8:02 AM ET
Replay
Watch the replay on this page · 47 min

On 6ix: 6ix.com/event/automotive-axles-limited-autoaxles-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:01 Ladies and gentlemen, good day, and welcome to the Automotive Axles Limited Q2 FY 'twenty seven Post Results Earnings Conference Call hosted by three sixty one Capital Market Private Limited. As a reminder, all participant lines will be in listen only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Please note that this conference is being recorded. I now hand the conference over to Mr. Anand Darshan from three sixty one Capital Market Private Limited. Thank you, and over to you, sir. Yeah. Thanks, Sharia. Good morning, and thank you everyone for joining Automotive Axles q two FY twenty twenty seven earnings conference call.

0:52 From the management side, we have with us mister, president and whole time director, Automotive Axles Limited, mister, chief financial officer, and mister, whole time director, Emeritus HPS India. Now I will ask Mr. Nagaraja for his opening remarks, post which we will open for Q and A. Over to you, sir. Thank you. Good morning, all. This is Nagaraja Gargeshwari. I warmly welcome all of you to this investor call. Firstly, I would like to congratulate Mr. Raman on being appointed as full time CFO for Automotive Axles. We had a very good quarter. We were able to grow both our top line and bottom line. Our investment in capacity is kind of getting realized now, more work to do there.

1:43 However, we also have headwinds with respect to certain commodity supply chain constraints, which we are addressing as we speak. I firstly request Kishan Kumar, Director MHVASL, to give a quick market update and followed by Raman sharing the financial results for the quarter. Over to you, Pishan. Thanks, Nagaraja. Good morning, and I hope all of you had a good Diwali. To start with, I think all of us are experiencing probably all the right things happening in the country with respect to the overall economy. So the Q1 was a very strong performance in terms of GDP with a very high 7.8% and followed by Q2, even though it was slightly downward from the earlier, but started with a strong base. So it was at 7.35% estimated.

2:46 Even though the inflation was slightly higher in August, I think overall resilient market and domestic consumption actually is helping the economy. And to add to that all the infrastructure projects, the high industrial production rate, freight activities and the surprise factor was monsoon. It was probably better than what it was forecasted earlier. So all these things are actually helping the overall economy and also our industry. And in addition, specific to our industry, what we should notice is the replacement cycle for the vehicles, there is a large volume of vehicle which was sold between 2018 and 2020, which are now six to nine years old.

3:32 And if you remember, that was the BS VI launch. So there was a lot of pre buys that happened. All those vehicles now are getting old and the replacement has kicked in. I would say the GST 2.0 started the momentum. It carried forward with all of the positive sentiment. The replacements are happening. As a result, I would the result is very clear. The Q1 was record high compared to the previous year. The Q2 also had a pretty high volume based on the previous similar quarters, previous years. So with all that, the industry volume compared to the last quarter was also the highest ever. And we see this momentum going forward as well. So the replacement is still happening. There are certain regulation changes expected.

4:19 There are certain pre buys that we expect to go until April of next year. Overall, the sentiments and all the right things that I mentioned happening is giving us a very confident market outlook. And how this will pan out beyond April up to September, that is a little bit of a watch right now. But we are confident that overall the market would pan for this year plus 500, which is again a record because the previous highest was in 2018, four hundred eighty thousand, which we already did last year. So this year crossing 500 is very much in the horizon and we are confident the market will put a very strong performance.

5:05 So with that, I'm here to take any questions later. Nagaraj, over to Raman. Thanks, Sanji, for your. And thank you all, gentlemen, for joining. I'm happy to present the Q results for Automotive Axles. So our revenue from operations was $600,625,000,000, which is up 28% quarter over quarter and 43% year over year. This has been our strongest ever q two revenue, thanks to the market, you know, being very favorable, as Christian mentioned. And overall, our total income stood at 6,709 million compared to previous quarter, which was at 5,271.

5:53 This is... This represents close to about 27 percent growth quarter over quarter. Year over year, the growth stood at 42.6%. The reason why revenue to this... There is margin difference is because of the other income because our treasury income was slightly on the softer side this time. Last quarter, we had some one offs that we had realized because of a very poor q four. So that kind of kind of flattened out in q two. So I think that's a very small impact. So overall, 2027% q o q and 42% year over year on the on the income side as a growth. Now to the cost, I think we were we were very efficient in managing our costs. So there are lot of headwinds that are happening in the market with respect to the conversion cost increases on account of fuel as well as some of the raw materials that are coming from the other global markets.

6:54 We are very we are very watchful, and we were able to kind of, you know, get the best out of what is available in the market. And overall, our metal cost for the quarter stood at 66.2 percent, and all our other overheads are slightly lower in terms of percentages, thanks to the higher top line of 28%. So we did get a lot of absorption benefits. So that leaves us with the EBITDA of close to about $910,000,000... 910,000,000 at 13.7%. So last quarter, we reported 13.6% EBITDA. This time, we are slightly above that. Instead of the higher raw material costs quarter on quarter, which is on account of some mix and also some escalations that are there. Our EBIT stands at 812,000,000 at 12.3%.

7:43 As compared to last quarter, we are about 31 bps more. And our PBT stood at 807,000,000, and again, close to 30 bps more quarter on quarter. And our EPS for the quarter stood at 39.8 rupees. Again, that also represents a similar 30% kind of a growth when compared to last quarter, and year over year, it's 67% jump. Also, moving on, this being half year ended, we also have the half year results. So our revenue was about $1,100,793,000,000 and a total income of $9,009.81, and which is kind of year over year growth of 23.6%.

8:29 Our metal costs, again, you know, remain more flattish year over year as well. So I think in line with the top line growth, our metal cost has also, you know, moved on the same lines. Nothing significant there. And we were able to get some efficiencies on the cost. So thereby leaving EBITDA of thousand 613,000,000, which is at about 13.7% as against 12% last year. So close to about 165 bps expansion year over year. And and our PAT for the half year overall is at thousand 57,000,000 at 9%, up again one one forty three bps year over year, which was 7.5% last year. So there's one forty three bps expansion.

9:16 So hedge fund EPS, we are ending out at 69.9 rupees. Again, up close to 47% year over year. So I think those are the financial set of numbers. I'll be happy to take any questions that you may have later in the call. I'll hand over it to Nagaraj for any comments. No. Thanks, Simon. Thanks, Kishan. So probably we'll take up the call, you know, any questions now. Thank you very much. We will now begin with the question and answer session. Anyone who wish to ask a question, may press star and one on the touch tone telephone. If you wish to remove yourself from the question queue, you may press star and 2.

10:03 Participants are requested to use handsets while asking a question. The first question is from the line of Saket Kapoor from Kapoor and Co. Please go ahead. Mister Kapoor, kindly unmute your line and proceed. Mister Kapoor? As there is no response, we move on to the next participant. The next question is from the line of Samad from Janak Merchant Securities. Samar, please go ahead with your question, please.

10:59 Do you have any issues on the bridge? No, sir. I think the participants are not responding., sir? Are you able to hear me? Yes, sir. Please go ahead with the question. Yes. Am I audible? Yes, sir. Please go ahead. Yes, sir. You're audible. Please go ahead. So sir, three questions from my side. First is, is there any change in product mix for this quarter, which has resulted on the resulted in the margins being on higher side? Second is, have we got any traction on the export business?

11:44 And third and the third question is, your largest customer is now moving in they have started accepting air suspensions. Globally, we have this product. So any plans to get in this? Okay. So I'll take the first two questions and then probably Kishan will talk about the product suspension. So our product, whatever the product we introduced about two or three quarters ago, those volumes are going up, which kind of helping us. But generally, this is the product mix we have been telling the market that what customer wants and what we have already developed and then supplying.

12:30 So on the export front, right now the capacities have been stretched to even meet the domestic market. While we're still exploring the potential export opportunities. We continue to serve the current business, whatever is there. But we'll continue to explore additional opportunity now that we are putting in additional capacities. And Kishan, can you take up the last question? Yes, sure. So specific to the air suspension, we are not into that category of suspension, even in India and also globally. But our products are very well proven because in the Western world, the axles that we sell in India, they all go with the air suspension mostly. So our products are very well proven and those vehicles which you mentioned, they already have our axles and the required customization for that type of a suspension is already done.

13:27 So we are well protected. That changeover, shiftover will not impact us in terms of our share of business. Thank you. Thank you, sir. Thank you. The next question is from the line of Saket Kapoor from Kapoor and Co. Please go ahead. Hello? Yes, sir. You're audible. Please go ahead. Yeah. Yeah. Yeah. Thank thank you for the opportunity. Namaskar to the team, and it should be probably to everybody. Sir, firstly, if if you could just give us an understanding of how are we prepared for our capacity augmentation exercise. And I think so the closing capital work in progress is closer to twenty seven crore.

14:17 So going into the second half, what kind of additional capacity are we coming up and what's the road map ahead for us? And I think so. In our earlier conversation, we have spoken about 5,000 crore of top line closer to $20.30 a year. So if you could just give us some more color, how are these numbers indicating to the trajectory that we have articulated earlier? Thanks for your questions. So let me take the first part, and then Raman can address the other one. Yeah, like I mentioned, capacity what we have put to what we anticipated, even though there was a bit delay in realizing those capacities, now they are in place.

15:08 We are still fine tuning everything and putting it in place because as we're trying to meet the customer demand and manage the supply chain constraints, so we are working on that. So, with this phase one capacity expansion, we should be good with the current market demands. So, we are also kind of exploring how the future scenario, whether this particular market is a short term spike or it is going to sustain. So, do continue to evaluate that and then we are working on our Phase two strategy when it comes to capacity. So, with respect to top line, probably, Raman, do you want to take that or Just to sir, just to add. So we have not added no... Unknown, but new capacity has been augmented as of for the first half.

16:05 And for the second half also, do we have plan to... For any incremental capacity that gets capitalized? Because we have yes, yes, please. Yes. See, right now, if we had not invested in the capacity, we would have been having a big challenge in meeting the customer demand and then achieving this kind of a top line growth. So, we started investing in our capacity to enhance it by at least 20% to 30%, which we are getting realized now. Not completely, but we will be completing it by next quarter. So, we are going to have the required capacity in place for a market of this size. And from there, whether we need to add the capacity in what specific areas we need to add it, that we are working on the strategy. So once we get a confirmation from the board, then we'll be sharing with you.

17:03 Over to you, Raman. Yeah. So so you touched upon the 26 crores work in progress. Right? As Nagarash mentioned, so this this this represents the final phase of the last previous one 20 crores that we had committed. So which is which is more towards the the final stages of implementation. So... And there is... As he mentioned that, you know, that is to meet the current demands. So, yes, we have we have a line of sight of sorry, rather what we presented was a 5,000 pro top line by 2030. So we are looking at areas where we need to invest and and what sort of product line, you know, that is going to fetch us there and what sort of technology that we need to invest. So that is a strategy as Nagarad mentioned that we will be working with the board and taking their con... You know, consensus, and then we'll be investing over the over the next two years.

18:00 So just to conclude, so we are currently prepared with a five lakh tonnage market in the MSTV segment. So as as you mentioned earlier that we have aligned our product profile in a way that we can service market up to that that that, Tenet. So there are five five, like, numbers. So that that understanding is correct that we are fully geared up with our portfolio to cater to to what the market of... Current market opportunities are. Yes. Like I said, yeah, go ahead. So, yes, your understanding is correct. This capacity, what we are there, we should be able to manage these peaks. But like what Raman mentioned, we are also looking forward.

18:49 And to the earlier question, exploring more and more export opportunities. So as we kind of finalize that road map, we'll be going and looking at adding additional capacity where it is required. Two small points, sir. Firstly, how are you seeing currently H2 looking up? Although you gave some color of how the current entering quarter is shaping up in the demand scenario, but how do you see H2 shaping up in terms of the EBITDA margin trajectory and also the incremental volume, if any. And secondly, sir, there were some state regulation pending for some some floor meter height for the buses for which our XL were developed, and we were in the process of the... Even the OEMs were were preparing themselves for the launches.

19:43 So where are we in terms of the the regulatory part? And are we supplying those excess currently? And if you would just give some color on the same. I'll take the first question and Kishan will probably answer the preceding questions. So while we don't make the forward looking statement, we feel that the market is going to hold at least for the next couple of quarters. And as we have demonstrated in Q1 and Q2, when there is a market demand, we'll be able to convert it very strongly. But having said that, I already mentioned that there are quite a bit of headwinds out there, both in terms of the price increase and the supply chain constraints, while we are working, engaging with them and trying make the best out of it. We feel confident that we should be able to convert any of the potential demand market opportunities, we should be able to convert it very positively.

20:54 Kishan, can you take the other question? There are there are Mister Kishan, we're not able to hear you. Hello? Am I audible now? Yes, sir. Please go ahead. Yeah. Sorry. So I was mentioning there are... There were two axles specifically to the bus market. One was the coach axle, which we have already launched for the thirteen point five and fifteen meter two quarters ago. That is in production. The second one, which you specifically are referring to the regulation related. The regulation as such doesn't impact our axle. It was more of how the OEMs want to take that regulation and configure their configure their vehicle.

21:40 So that development of that new action, that is still in progress. We have slightly slowed down for the reason that the current demand that we see is is is forcing us to develop alternate supplier, and all these alternate suppliers have to go through certain validation. So we are freeing up our lab capacity to support that, which is the need of the hour. And when the time is right, we will launch the the bus action, which is almost today, I would say 90, 95% on the validation is done. We are just looking at how the product... The overall market is behaving, where the demand is. And right now, the demand is in the heavy duty segment, heavy duty truck segment. That is where our focus is to ramp up that product, which we launched a couple of years ago. And the second product, which we launched for the heavy duty segment, the tandem axle, which will get into production, and we will get into a ramp up by q four of this year.

22:31 Right, sir. And last point is on the income tax paid part in the cash flow. We see 31 crore being the amount paid, but it is mentioned as net of refund. So can you quantify what has been our payment towards the advanced taxes for the first half? So so it is it is as per our estimated profits for the year. So as per the statutory limits, you know, we have paid 45% of what was... Is supposed to be paid. Actually, Anurag is... Yeah. Okay. I I just It kind of represents... It represents, you know, there thereabouts. Anyway, we have a limit of minimum 80%. Right? So I think we have... We are we are well within that limit.

23:17 Okay. And, sir, can investors look forward for plant visit at our Mysore unit? Are we entertaining any request? We, as investors, can Yeah. Think you can... Yes. You can do that. Please reach out to our Company secretary. Okay. Company secretary, and then he'll be able to arrange for it. You're welcome to visit our plant anytime. Okay? Right, sir. Sir, I'm joining the queue, and these are really very encouraging set of numbers after... I think the q on q to twice quarter on quarter, we are delivering on the expected line, sir. All the best cases. Okay. Thank you very much. Thank you. Thank you. The next question is from the line of Lakshmi Narayanan from Tonga Investments. Please go ahead.

24:06 Yes. Thank you. A few questions. In the first half, can you just help me understand what is your product mix in terms of domestic and exports? And second, what is the mix of different type of vehicle category? And the third is what's the type of product per se, and product mix in terms of Axles and various other things? Don't think don't think that's... Yep. Sorry. Go ahead. Yeah. And this... Sorry. Mister, for the question. So other export has remained, you know, consistent in in the same levels as what we had last year. So... And the main focus is, as Krishna, as well as Angie mentioned, is the the domestic market where there is a lot of traction happening, so we are servicing that. But at this point, you know, we are not... We are maintaining our share of business on our exports.

25:09 Yeah. I I think, you know, we don't... It's very difficult for us to change, you know, share those things, you know, in terms of product mix. But generally, Kishan mentioned that, you know, there is a big demand in the heavy duty segment. So there are a lot of tractors and cheaper volumes are coming along with some air suspension models. I think that is the product mix, has been kind of predominant in the last couple of quarters. But again, it is very difficult for us to kind of predict what kind of product mix going forward. But we are ready to sell the customer depending upon what they need. So, right now, we don't have any major concerns with respect to the product mix.

25:55 Sir, I understand there is a movement towards higher tonnage and also there is a movement towards tractor trailer, right? Now and and the third, there is also a change in various regulations like electronic suspension or ADAS and all those things. Right? So as these things, all of them come in. Right? One is regulation driven, safety driven, and also there's a tonnage increase and way in which the haulage is done is also changing. How our product mix would actually would change and how fast we can actually maneuver ourselves to kind of capitalize on all these underlying opportunities. Can you just help me understand that?

26:41 Nishan, will you take it? Yeah. I can. So I don't want to downplay what's happening in the Indian regulatory system. I think we are probably the only country right now catching up very fast. We see every year there are multiple regulations coming in the TV industry. All are in the good with the good intention and the right direction. But what we have to remind ourselves is specifically for a company like us, where we have a very large footprint outside India. And these Western countries have already gone through most of these regulations, barring BS7 or Euro seven that is still pending. But all the others what we are talking about right now in terms of safety, ABS, EBS, suspension, these are already done in rest of the world and they have been there for last twenty years. And the products that we have in India, they're already proven for those. And there are next generation access, which are yet to come to India, which will be focusing on efficiency.

27:40 We are already talking to some of the customers and OEMs here, how do we get into the market as a first player. So mostly we are ahead of the curve in terms of technology and product availability, thanks to our global portfolio. And when the Indian domestic market catches up, we are ready with that. The best example is the 185 where it is getting into high numbers now, but the product was available with us three, four years ago. And we anticipated the high tonnage, high power HP shipped to tractor trailer will happen in India with all the right indicators of better infrastructure, better roads and the regulation. So we are very closely monitoring and our product portfolio for the next three to four years is protected for that. Got it. And two things, and I also hear that the planning cycle, you know, at least among the Indian OEMs are very, very volatile because they themselves are unable to really predict down demand.

28:39 And how you are looking at it to ensure that there is no whiplash effect on us either in terms of we are running out of capacity or we are actually have, I mean, have more materials and we are unable to... I mean, the demand suddenly goes down. How that is... How you're improving the predictability of your business? And second, in the last six months or so, steel prices have actually gone up in high double digits. So if you look at your business, how much of the revenues have been accounted by sheer metal price increase? And if you can just help me on these two things. Okay. So first of all, you are right, sometimes the forecast is kind of a volatile.

29:30 And also, we been very we are having quite a lot of variance to cater to the customer requirements. So, we have been very prudent in terms of planning our material. So, again, ABSOLAS since it's always a challenge, but we also have a very good understanding and agreement with the customer where we do not inventorize slow moving or non moving material. So, it's a challenge. So, that is where we are also kind of finding some constraints because some of the materials like gates, they may have anywhere between six to eight weeks of lead time from getting the metal steel all the way to finishing those parts.

30:25 So, challenging, it's but I think we have a very capable team and also we continuously engage with the customer to ensure that how the product mix changes and how we can react to that. The capacity is one thing that we knew that and we wanted to put in for this kind of a market. So, we will try to bring in as much as productivity so that we can not only turn around in a a good time, but also optimize our inventory. Got it, sir. And in terms of the metal price increase in terms of contribution to revenues in the first half? Yes. It is like again, those are all too much of details based on the product mix, a lot of things can change. What I would say that we always have the any material or commodity increase back to back with the customer. That arrangement is there, which is pretty much standard in the industry.

31:25 So that way, unless and otherwise, if something else is happening, are covered for that because it's back to back with both customers and suppliers. So for us, the impact is neutral. The next question is from the line of Akash from ADT Capital Group. Please go ahead. Hi, sir. Am I audible? Yes. Please go ahead. Yeah. So firstly, congrats on a good set of numbers.

32:13 Just wanted to be double sure on one thing that we have capacity in play to be able to to onboard 20% higher volumes than what we handled last year in h two. Just wanted to be sure on that. Again, it's a little bit tricky question. So I think when I look at it, the overall things, there are two things which will impact our performance or deliveries. The first one is the in house capacity. Like I mentioned, we are putting in we have been putting in the capacity. A portion of that we are already getting realized. And like I said, by early next quarter, we will be having the required capacity in house.

33:02 But having said that, there is also you must have heard in the market, the scarcity of availability of steel and then also the capacity constraints at the supply chain. And just now the other gentleman asked about a sudden product mix change. All those things can have an impact on overall performance, but we have been very positive in engaging in each one of these both the challenges and opportunities to make the best use of it. So the rest assured, we are having capacity for this kind of a market. And like I said, as we continue to work on the, you know, the constraints, we should be able to convert or we should be able to meet all the customer demands.

33:58 Thanks, sir. And second, my question will be on the margin spend, sir. This time, we see both our gross margins and EBITDA margins going sequentially as well as Y o Y business going up. Do we expect EBITDA margins could increase even further from here given our execution rates and capacity, everything has increased? So I'll take that question. So, currently, at these revenue levels, right, so you also have a lot of absorption benefits where you build inefficiency. So that's where you're seeing the margin expansion. So, like, again, so it is all linked to how the market performs in in in pitch two and and and going forward. But, you know, our our endeavor is to ensure that, you know, we we we we are... We remain lean and ensure that, you know, we we protect the margins. Margins.

34:56 Sorry, sir. I actually did not... I'm not sure whether my question got interested. If could repeat your answer. Yeah. No. I was... No. I was saying, like, see, the margins... The expansion of margins is also... There are there are there are two key reasons. Right? One, how our product mix works. Second, you know, how how efficiently we are, you know, able to convert the the higher revenues. That would also give us a margin expansion. Correct. As I said, right, if the if the market remains consistent, we'll be, you know, in a position to to to to deliver similar margin levels. But, again, it is all subjective to how the market performs over next month. So given the current market... Sorry to interrupt. Given the current market conditions, if the trade is more in favor of the heavy duty side, does it... Is it favorable for our margin as well?

35:53 Again, as as as Andy mentioned, right, there is there is quite a few of product mix that we have even even within the within the heavy heavy duty axles. So, yeah, that that will determine, you know, how our margins will be there in upcoming quarters. Okay, sir. Do you have any follow-up questions? Actually, I I generally do not understand my answer to the earlier question itself. Just wanted to be sure that, you know, if the tilt is more on the heavier side, heavier axis, I... My understanding is that the margins, it should be favorable for our margins. But, sir, I mean, I...

36:44 So, again, we don't want to dwell too much upon the margins based on a particular product. But I... Yeah. I think, you know, probably it makes sense because Axles, you know, not just the margin, but also how efficient we are in converting it. So, like I said, there are commodity headwinds out there and our overall performance, inventory management, everything will contribute for it. What I can say that is, as we are putting in our capacity, as the market demands are very strong, we should be able to perform pretty well, convert more efficiently wherever the opportunity is there. So that's how I would like to summarize.

37:31 Got it, sir. That's it from my side. Thank you. All the best. Thank you. Thank you. The next question is from the line of Lakshmi Narayanan from Tonga Investments. Please go ahead. The question is that as there is movement towards electric buses and electric commercial vehicles, etcetera, and also there's emission change now that is coming in, How those things would actually increase the value of components which we actually supply? And also, is there something like the smart axles where there are there is some kind of information that actually flows from the axles to the control systems? Is it something which is prototyped in India?

38:19 Or is it something which we can work as and when the demand comes? Thank you. I'll take that question. This is Kishan. I will answer the later part first, which is the SmartAXL. So globally, there are projects, and even in India, we have done certain projects on telematics, which will provide data to the or the vehicle system, vehicle level system in terms of the axle health. But as a feature, even though it is available, this is not something the OEMs are focusing today. I think there is a lot more that is happening in the safety and the engine itself, right, emission systems. So the entire focus is there. And in globally also, these are the last probably the last piece of technology that would be on the vehicle depending on what the end customer will see or perceive it as a value. So yes, the answer is yes, there are solutions available, but whether they are marketable and commercialized today, probably no, even in the Western world that's not happening. But there are multiple solutions available and smart axle is a very large area of many different things that we can do within the Axles architecture.

39:34 Now the first question, which is more specific to the regulations or in general what is happening in India. Emissions per se, we do not have any impact on both the axles and brakes. It is more towards the engine only. But what will happen, which we are already seeing is with higher HP, our engine our vehicle platform or axle platform will change. Like we have already shifted to the largest axle available in the portfolio today. There are next two levels or three levels of products available, which we will evaluate and get in. What actually will be a game changer in terms of technology or need in the market is Axle efficiency. Today, there is no real normal regulation that is asking OEMs to demonstrate.

40:21 But in the Western world, this is already there. So we have to declare our actual efficiency to the OEMs and in some cases, OEMs also declare the actual efficiency and vehicle efficiency together. That regulation norm is not yet in India. When that norm comes, the overall look of the axle may not change, but how we design some of the aspects, for example, the gears and bearings, they will be different. They will be high efficient or more lightweight. So there are a lot of other technology that we already have demonstrated in the global market that is available to us. When the Indian market is ready, we'll be ready to launch them. It's not that the Indian OEMs are not interested. Right now, I think the focus is elsewhere, which is where the entire industry OEMs are focusing on in terms of how to address those regulation changes and ensure that we have a long term product strategy or, you know, overall vehicle strategy available with us to align with the regulations when and whenever they come into place.

41:20 I hope that has answered your question. Yeah. Yeah. Just one follow-up question on that. You know, as an organization, you know, I understand that we we do a lot of innovations in r and d. And I want to understand the... You know, what is your... Do you benchmark or how do you measure your innovation either by new product development or so? And if so, what has been the number for whichever whichever way you track for the last six months? And also, you know, we go deeper in the existing relationship and give more products, and we also identify new customers in general. So what is the... Our, you know, tilt in terms of... Or the measure towards existing products with existing customers, existing product with new customers, and and new customers with new products. Some kind of picture would be helpful.

42:14 Sure. I think I missed one of the one part of your earlier question, the EV. You mentioned about EV. Yes. We are as we speak, the EV space, the architecture is central motor or remote motor and regular powertrain. So our current product portfolio and also the next generation product portfolio within the mechanical traditional axle is protected. So I just wanted to answer that as well. Now moving on to your next question in terms of innovation, some facts, Cummins Meritor or Meritor assets globally, we are the number one independent drive axle manufacturers globally I'm talking about. Even in India, being here for last forty plus years, we still hold that position. It's not just because of the innovative products, it's also our ability to cater to the market what it actually needs. Like Nagaraja mentioned earlier, in India, we like varieties.

43:07 So the for one OEM, we may be having under one axle platform 20 to 30 varieties, variations. So that is what is helping us to cater to the dynamic requirement of the market and ensure that we have slicing of products available across seven to 60, 70 ton of know GVW. That is probably I would say is currently more important for India. Next is innovation where as I mentioned giving some of the examples, we already have these innovation or technology available. And usually in every region we are the first one to introduce a new product. We talked about SmartAxle. We had introduced SmartAxle twenty years ago. Right? But the market readiness and acceptance, that is different in each region. It is Europe is totally different, North America is different, India is different. India is more inclined towards following the Europe regulation, but then at the same time very cost sensitive. So our innovations are addressing both.

44:06 So I can't put a number to that, but we know from the track record what we have, we are usually ahead of the competition when it comes to medium and heavy duty vehicles. Got it. So is it... I mean, from our new products, which are the new... I mean, the units traveling from six... Sorry, from seven gross weight to higher, is it almost like onefive of the products which you have in the market right now didn't exist in our portfolio a couple of years back or some kind of a number would be helpful? Probably, I'll take around 2020 as the time frame. So 2020 to now, we have launched four products, which were not there before, And they are all addressing the shift that we are seeing in the market.

44:52 And even for the EV, which I mentioned, which are remote mount, there are specific design changes in the previous generation of product, which we are now refining. So 2020 onwards, there are four to five new products, which were not there earlier because the market has also shifted. There are other factors that influence these changes. But all these four, five years ahead, the competition is now catching up. Okay. Thank you. Thank you, sir. Thank you. As there are no further questions from the participants, I now hand the conference over to the management for closing comments.

45:42 Okay. Once again, thanks, everyone, for joining this conference. As I mentioned, the team at Automotive Axles is fully prepared to meet the customer demands. Just to summarize, as we kind of realizing the capacities where we have made an investment and the market demand being strong, we should be able to continue to cater to the all the customer requirements. And hopefully, the H2 will be as strong as H1 and we should be able to convert additional opportunity, if any, with a higher margin. Once again, thanks for having confidence in Automotive Axles.

46:29 Have a great day. Thank you. Behalf of three sixty Capital Market Private Limited, that concludes this conference. Thank you for joining us, and you may now disconnect your lines. Thank you. Thank you very much. Appreciate it. Thank you all. Thank you. Thank you.

Follow Automotive Axles Limited into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from Automotive Axles Limited