Replay available

Atlas Copco AB (ATCO_A) Q3 2026 Earnings Call

Atlas Copco AB (STO: ATCO_A) Q3 2026 earnings call, held 2026-10-22. Watch the replay and read the transcript on 6ix.

Thu, October 22, 2026 at 8:00 AMendedReplay
Atlas Copco AB (ATCO_A) Q3 2026 Earnings Call
Period
Q3 2026 earnings call
Date
Thu, Oct 22, 2026, 8:00 AM ET
Replay
Watch the replay on this page · 56 min

On 6ix: 6ix.com/event/atlas-copco-ab-atcoa-q3-2026-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Welcome to the Atlas Copco Q3 2026 report presentation. For the first part of the presentation, participants will be in listen-only mode. During the questions and answers session, participants are able to ask questions by dialing hash 5 on their telephone keypad. Now, I will hand the conference over to CFO Peter Kinnart. Please go ahead.

0:25 Thank you, operator, and to all of you on the call, a very warm welcome to this Q3 2026 earnings call for Atlas Copco Group. Before I hand over to Wagner to start with the short presentation, I will already now remind you to only ask one question at a time during the question and answer session, just to make sure that all participants in the call have the opportunity to raise at least their one most important question. Should we, of course, go to the queue, we, of course, create the opportunity to ask a second question afterwards. But without no further ado, I will hand over to Wager to present the quarter results. Thank you, Peter, and welcome to this conference call where we will present the Q3 results.

1:15 And we are also quite happy to announce the result. I think we are quite pleased to see the development in orders received with a very strong order intake, driven by several product lines, several divisions, and the four business areas delivering organic growth, and three of them with double digit organic growth. It was really good to see. Of course, vacuum is outstanding, very nice development there. But basically, most of our divisions are doing quite well with good organic growth. We also see continued growth in service, which is part of our strategy for several quarters. We have positive development in our service divisions.

2:05 Also very happy to see that. And also the activity level was strong, the order intake strong. We had record revenues, quite happy to see the level we managed to reach, driven mainly by vacuum technique, as we are going to speak later on. But we are quite happy with that development as well. So profit margins, I think what I'm happy about is to see the sequential improvement. I think that was good. And also the fact that we are ramping up, we are now delivering record levels in revenues, and we also managed to deliver a solid operating cash flow. We are also quite happy with that development.

2:56 And in the quarter, we closed four acquisitions. So then looking more into the numbers, 52.3 billion Swedish krona in orders received, which is an absolute value, also a record level, but we have some currency help there, which ended up in a 25% organic growth, quite solid. like I mentioned before record revenues 47.9 billion Swedish krona organic growth of 11% was also good to see in vacuum technique they managed to have a very good output and very good organic growth in revenues as well Profit margins at 20.8, but here we had some items affecting comparability. In this quarter, mainly the main item was restructuring that we have done in industrial technique, specifically related to our German product companies. that we had to do an adjustment in industrial technique due to low activity, lower volume, but the underlying margin was 21.3%.

4:27 And the operating profit at 7.7 billion Swedish Krona, also very solid. Increased in basic earnings for sure. Very solid cash flow, like I mentioned. Year on year, you see a drop in the return on capital employed, but sequentially, we see an improvement in our return on capital employed. Then if we go to the regional split, also quite happy to see growth in all the continents. If I started in Asia, very strong development, 39% growth. mainly driven by vacuum technique, but also the other BAs developed quite well. We have a little bit more challenging in industrial technique, but most of the other three BAs, they had good development in Asia.

5:28 So when I go to Europe, them 8%, it was a bit more flattish in compressor technique. business area, but very solid in vacuum technique, good in industrial technique, and also very good in power technique. But considering the situation that we see in Europe, we are quite pleased with 8% growth, because the environment is a little bit more challenging, but we still manage to grow our business in Europe. then North America very solid as well 39% growth again mainly driven by vacuum technique but all the business areas have developed quite nicely in North America this quarter power technique super solid industrial technique as well driven by both automotive and general industry very strong and compressor technique also very solid growth in in North America so In South America, 4% growth, good to see, developing well. The major country in South America is going through election, a little bit of challenge, but still.

6:55 good growth and also we see a recuperation in Africa and Middle East with plus 21 percent after a couple of quarters a little bit more challenging is also good to see a good development there where our main businesses are growing quite nicely so quite good to see the regional spread and the development of our orders in the different continents. And that is translated then to a 25% order increase organically in our orders received. 3% is structural, coming from our acquisitions.

7:40 so total and a little bit of currency help in the top line total growth 29 percent which is which we are like I said before quite happy to see that development then if we go to the different business areas compressor technique had like we have mentioned organic growth but six percent vacuum technique 82% quite outstanding development in vacuum technique but also power technique 13% double digit industrial technique 12% solid growth and it's also good to see the contribution of vacuum technique growing in 12 months rolling then if we go now more in details talking about the business areas organic growth of six percent in compressor technique we are quite happy to see solid demand of our compressors a little bit more challenging in Europe like I mentioned before not a drama but it's good to see six percent notable growth on our gas and process compressors there the development

9:11 keeps on going quite well we see LNG continues to be a good contributor especially coming from the US but not only also this quarter we saw good development in market segments like heat pumps for district heating in Europe as one example of markets that performed well this quarter for gas and process. Service continues to grow and that has happened for quite some time. Quite happy to see as well 5% organic growth on compressor technique when it comes to revenue.

9:57 Good to see. We also need to further increase output because of the organic growth and operating margin at 23.6, negatively impacted by currency sales mix from different products and geographies and higher supply chain cost. So lower than last year, but it's fair to say as well, it's the highest profitability that is still the highest profitability that we have in the group. We know we can perform better over time, but the most important for compressor technique is to continue to grow. And we continue to invest in technologies to achieve that. One example is this innovation on the cooling side.

10:51 that we can integrate this cooling or work together cooling and compressors, for instance, that could give quite a nice saving for our customers. Not only that, we also closed an acquisition this quarter, Euriclimat, that we have added in the report as well. It's a quite important acquisition because it will allow us to step into new markets. There will be more cooling, but not only. I think they also have low temperature heat pumps. And we are going to work now at the beginning of this acquisition to unlock this value. Of course, when you do that, there are quite a lot of integration items.

11:40 at the beginning but I think compressor technique keeps on building technologies that will allow them to have sustainable profitable growth and that's what we have achieved over the years and we will continue so when it comes to vacuum technique 82% organic growth is really good to see that development for sure and this is for vacuum technique was fantastic development on the semiconductor market but not only I think we are quite happy as well to see the development in industrial and scientific vacuum so there are market segments doing quite well that we see quite a lot of investments in segments like space R&D company countries investing more in R&D that is increasing the demand of our products in industrial vacuum we see metal metallurgy that has a very important segment battery production as well are important segments.

12:54 Service business continues and revenue was really good to see 28% organic growth in the revenues. And all that has translated in improved profit and profitability. So reaching 22.2% profit, mainly driven by increased volume. And we had an impact coming from the currency. Also good to see return on capital employed going up. And we keep on doing innovation. This product now is for industrial vacuum, a new vacuum pump. That was one of the first products that we developed when we started to step into vacuum. And now we have come with a new design with better energy efficiency. And we continue our journey on innovation as well in vacuum technique.

13:58 So when it comes to industrial technique, also pleased with 12% organic growth, really notable growth, very good growth on general industry. I think there we managed to focus on growing market segments like electronics, aerospace, defense, and some other segments where we can find good growth. Our products have been very well perceived. Some of these market segments, they need to do a fast rampart. ramp up and we have the right products to support them with that. But not only, and secondly, solid growth in automotive equipment, mainly driven by the US.

14:50 And there is because our customers, they need flexible production lines. There is a lot of reorganization going on in the US that requires flexible production line. And we have the right products for that. But not only, we also see good focus on automation. And like we have said in previous occasions, our focus on automation, we have done some acquisitions to further unlock this automation journey is now bringing quite good results, especially in the US. where we see good activity level revenues two percent organically profit improved but 18.7 is not where we want to be and and this time we have done the the and adjustments like I mentioned at the beginning some of our German operations were not at the level we would like and then we decided to adjust the underlying profitability is 20.6 so stable return on return on capital employed and here in the bottom you can also see a nice innovation now for boating application or or hard high torque application, often improved safety, repeatability.

16:17 And the good thing about this, normally you can do this hydraulically, but when you add some measurement equipment, you can really offer much better solution for our customers with process control. And that part of the business is also growing quite nicely, I must say. going to the left business area power technique also solid growth 13 we see improved demand overall all the divisions performing well of course the development in the us it's super strong because organically is very good on top of that we have done an acquisition of MTE that is also performing well.

17:10 But in many geographies, power technique is performing. Well, good growth as well in specialty rental and continued growth as well in our service business. Also good to see that they can catch up on revenues. So very solid revenues. And also I improved profitability. That was also nice to see that they managed since Q1 to bend the trend and to improve profitability. That was also quite good to see. And they continue to invest in innovation. This case is a new generator to empower. We have two generators inside of that canopy or container.

18:04 And the benefit of that is variable load applications can really save a lot of fuel consumption. so keep on investing and you see that they are also running at the record levels revenue also in power technique reached record levels so and then when we look to our if we exclude the depreciation of intangible for the acquired entities we reach 22.2 which is a good development I must say but perhaps with that I can pass to you Peter you can continue on the income statement okay thank you Wagner so yeah I think operating profit 9.95 close to 10 billion unadjusted compared to 8.5

19:01 Net financial items were slightly higher than last year, mostly due to the fact that we have a bit of a lower cash position and of course the interest rates tend to be a bit higher. So that's the explanation for that. Likely this is going to be on a similar level going forward next quarter. Then the income tax expense was just above 2 billion compared to 1.8 last year. I think very strong effective tax rate of 21% we benefited quite a lot from a few tax credits that we managed to acquire and that helped us to lower the effective tax rates significantly a bit better than we had actually initially anticipated before the quarter started so very pleased with that but of course that being said For next quarter, we would rather expect the effective tax rate to be slightly higher.

19:53 We think maybe somewhere around the lines of 22.5%. And that brings us then to the profit for the period of 7.7 billion compared to 6.7 billion a year ago, an increase of roughly 1 billion Swedish krona. If I then move to slide number 12, Then we can talk briefly about the profit bridge for the Q3 compared to last year. As you can see, the shared based LTI programs have basically no impact. There is an impact in the quarter, but it's exactly the same almost than last year. So therefore, no net impact on the margin. the items affecting comparability as we already said last year we had some restructuring costs both in vacuum technique as well as in industrial technique we talked for 206 million Swedish krona this year we have this one-time cost related to industrial technique of 132 million sec leading to this net 73 which then has a kind of positive impact to the margin or small one at least Also, the acquisitions are slightly dilutive, as you can see. The currency had also a bit negative effect.

21:07 And I would say basically the main reason for that is the operating exchange differences. And specifically, if I want to isolate one particular currency that has a significant contribution to that total number, then it was the Korean won that strengthened quite substantially across the third quarter. and affected us considering the different types of operation we have, for example, in vacuum, in compressors, et cetera. So that is the explanation for that effect. And then last but not least, we have the organic development of the margin with a good drop through and a good impact positive impact on the margin mostly driven by the organic revenue volumes the combination of volumes price etc leading to that improved margin but then to give you a little bit more color we can go division or business area by business area on slide number 13 starting with compressed compressor technique as Wagner already mentioned robust operating profits with a strong focus on continued growth for the future but then acquisitions also here slightly dilutive the currency also negative but basically for the same reason as I just explained operating exchange differences within the most important currency in that effect being the Korean won amidst many others of course as always but Korean Wong being the most important

22:38 detractor let's say for that particular point and then organically a little bit of a dilution you could say partly because of mix a mix that consists of many different components but let's say highlighting I would say the product mix as well as a geographic mix that plays into that And then, as we already explained also in the text of the report, we see, of course, an increased cost pressure from the supply chain. And I think we are all aware, given the hot environment that we are all in with the data centers being built all over the place. there's a high demand for many different types of commodities and that of course has a bit of an impact in the short term at least on the on the product cost thinking about things like in the oil prices not to be forgotten of course aluminum castings desiccant electrical and electronic components etc So I think that is explaining a little bit what's going on. But as Wagner already said, still the highest margin across all the four business areas in the group. And I think overall, still very solid within the industrial space. And again, we have always indicated that even if we had 25% margin and more at some point in time, that this was not necessarily going to stay like that all the time.

23:56 And that our main focus is growth of the business with a good value creation for the shareholders in absolute terms, even if we need to sacrifice due to investments we need to make in the relative margin. Moving on to vacuum technique, of course, very strong development in the margin. or in the results for the vacuum technique driven by the volumes as you can imagine we have also indicated last quarter and that still continues to be the case that the ramp-up cost is still affecting the margin to some extent aside from the negative currency that we already mentioned and a slight dilutive effect from the acquisitions and of course a positive impact from the fact that we can see the restructuring costs from last year coming back into the margin so to say but again I think we see sequentially a continued improved operating margin in vacuum technique and for that we are extremely pleased that we can continue to harvest from the volume increase that we are generating and most importantly that we are able to deliver to our customers according to the expectations of the customers that continues to be the key issue and if that requires a little bit of higher ramp up costs and also more agility for the future then we are quite fine with that we still see margin expansion going on On industrial technique, I would say pleased

25:27 with the fact that we see a very strong margin development. Of course, there is, of course, now the effect of the restructuring cost, but this is a one off. And I think it's, of course, to make sure that we adjust ourselves specifically around the automotive area in Europe to the current situation. Then the currency effect is not really relevant, even though slightly negative. but then on the margin very strong improvement to be fair we need to say that on the one hand volume price mix is contributing to that on the other hand decreased cost level of the of the tariffs compared to last year last year were exceptionally high I would say in the early stages today they are a bit more normalized and that is one thing that you also see coming back in Q3 here which might not necessarily come back in the coming quarters and then last but not least power technique also here both in industrial technique and power technique we've over the last one and a half two years we've done several restructuring activities and of course that is also paying off in the margin but also the fact that we have a strong volume price mix development within power technique contributes to this margin improvement to 18.3 percent the currency also here slightly negative acquisitions mainly due to the MTE acquisition as well as CRIMAN having a positive

26:57 impact even on the margin given the good development there if we think about the foreign exchange effect in the quarter looking forward for Q4 We do believe that all things being equal, of course, I'm not the Oracle of Delphi, so I can't predict the exchange rates, but all things being equal, we do expect that the bottom line in absolute numbers will turn slightly positive. Somewhere around half a billion Swedish kronor, we assume, is likely to become the currency affecting Q4. With that, I will move then to slide number 14 on the balance sheet.

27:42 To be honest, not much news to be told here. So I think the main thing I would like to mention is that the dividend is being paid as we speak. Actually, tomorrow, the dividend will be officially paid out. We already went ex-dividend a few days ago. So that is the main impact I would say that is going to happen. Otherwise, I think a relative normal development. Of course, in context of the cash flow on slide number 15, I would like to highlight the development of the inventories, the receivables and the payables. Because besides the fact that we've had quite a nice improvement in the operating cash surplus linked to the business development we've seen over the quarter, the strong revenues and the operating profit coming out of that. We also saw probably less than one would expect change in the working capital. I mean, with the growth that we are going through, the ramp up we need to do, one would expect higher inventories.

28:36 Of course, more invoicing means more receivables. Yet if we look at the cash flow, we don't really see that effect rising in a material way, minus 87 million. So as a result, I would say we are very pleased with the cash flow. It is not a record level that we are glad to admit. But at the same time, in the current growth environment, we believe that the cash flow is super solid for the third quarter. And then with that, I would like to hand over back to Wagner for some conclusions and explanation about the near term outlook. Thank you, Peter. And I would like to repeat that our forward-looking statement is a sequential guidance for the next quarter.

29:24 and refers to our customer activity, excluding large orders, potential FX swings, and seasonality. And I would like to emphasize here between Q3 and Q4, we have seen over the last years that we do have seasonality. We do have that impact. So, and of course, we don't know what is the level of the seasonality, especially if you consider we have record levels of orders received, especially in the semiconductor. We saw quite nice order development, so it's hard to predict. what is going to happen in the in the semi but we continue to be very positive about the semi market so a lot of opportunities so we are quite positive we just don't know how it's going to play out between q3 and q4 and how big is this seasonality but for most of of of the other segments, we believe the activity will remain at the current level. And again, how all that will be translated into orders, it's hard to say.

30:43 You just need to make sure you consider there is seasonality between Q3 and Q4.

30:55 Thank you, Wagen. With that, we have come to the end of the presentation and the comments that we wanted to share with you. And we would like to open up for questions now. So please, operator, if you can guide us through the list. Thank you. If you wish to ask a question, please dial pound key five on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial pound key six on your telephone keypad. The next question comes from Daniela Costa from Goldman Sachs. Please go ahead.

31:30 hi good afternoon I just wanted to focus my question on the compressor technique division if you could provide a little bit more color on what in industrial compressors have driven that slight sequential deceleration whether that is temporary and what's the impact of the supply chain headwinds that you've seen both on the top line and on the margin if you can give any color about how this should evolve going forward as well Yeah, hey Daniela, thank you for the question. Yeah, perhaps you should not read too much on this sequential development because we said somewhat lower. and is mainly about Europe. I think we remain quite positive that we can continue to grow the industrial compressor market.

32:20 There are even positive signs in certain areas. We gain market share, which I mean, if I can be very specific, China this quarter, we were quite happy with the development because we did gain market share there. So I would not read too much on the margins. Perhaps, Peter, you can complement.

32:44 I think the margin development, the cost pressure that we see, of course, like I said, I think it's a bit linked to a hot market in terms of delivering a lot of industrial equipment. I indicated, of course, the data centers as being kind of very much in the news but there's a lot of other things ongoing at the same time and as a result electronic components for example are definitely under pressure in terms of pricing i think we all know that if you want to buy a laptop nowadays you're going to pay a lot more than just nine months ago And that is of course also valid for us at this moment in time, even if we have taken some precautions to try to stock up a little bit in a smart way to avoid as much as possible.

33:31 Also, the oil crisis and the effect of the Middle East, of course, is also playing a part into the supply chain generally. And I think it's just part of the inflationary pressures that we see popping up all around us in different areas. And we, of course, need to work with that and see how we can handle that from a pricing point of view and from a costing point of view as well, looking for alternative solutions, alternative sources, etc. But in the short term right now, we believe that it was fair to indicate that we see that pressure and that it's affecting the product cost in the quarter. The next question comes from Claes Berglund from Citi.

34:17 Please go ahead.

34:21 Thank you. Hi, Wagner and Peter, Claes at Citi. So I had a question on the growth in VT and the capacity that you have there. Revenue is up 16% quarter-on-quarter, so another double-digit quarter-on-quarter sales increase into the fourth, which would perhaps be 45% growth year-over-year at the exit of this year, and then on the drop-through over 30%. Your message here has been that we shouldn't expect a drop to reach those historical levels given the high cost for the capacity ramp. But now we got there. Is that better pricing now running through the P&L on orders that you've taken before? And therefore, as the capacity cost drops out, could it drop through perhaps then reach 40-50% going forward? Thank you.

35:09 Well, I think the capacity ramp up is continuing as we speak and will continue in the next quarter as well. There's no doubt about it. In Genesee, in the US, for example, in the third quarter, we've been able to start up gradually the production of spare parts. We intend to continue in the course of the fourth quarter with the assembly of actual pumps. That means that we are still not at full capacity there, for example, and we need to continue to ramp up as well. We also have indicated earlier that in order to become more agile in case at a certain moment in time the trend would start bending in the other direction, that we are able to react a little bit better than we were able to do the last time the business went down. we're also trying to make sure that we build in some mechanisms that might be maybe short term a little bit more costly but in the long term hopefully help us to be more agile for example how we set contract machining that we may not make the same long commitments as we used to in the past where today we we might need to pay a little bit more but at least we hope to be more flexible when a downturn for example would occur at a certain moment in time

36:20 What I meant, Peter, I didn't mean 40-50% drop through in the fourth quarter already. What I mean is as these sort of capacity ramp costs are gradually sort of dropping out, I assume that you have quite good pricing moving through the backlog right now. At least we hear that from others. So, I mean, looking at the drop through 33% right now, if you look into 27, I'm not sure how forward looking you want to be, but it seems like maybe it can improve over time as you continue to deliver?

36:53 I hear you, but I think maybe two thoughts on the one hand, pricing. Yes, of course, we are working really, really hard with the different customers in the segment to work on the pricing aspect, but it continues to be extremely concentrated market segment with very, very strong purchasing power from the big players. And even though we have best in class products, we are still not alone in the market. So that means, of course, that there is still a competitive play to be made. and so in the end we're working hard on the pricing part but it is not as evident as one maybe would assume in this strong vibrant market so I think that's an important component to take with you when it comes to the to the pricing then when it comes to the margin development going forward I mean let's say that we do believe that it should be possible to continue to see some level of margin expansion But we wouldn't suggest that it would be similar as we have seen in the last two quarters, maybe, depending on how things develop.

37:56 So I think a little bit of caution around that margin expansion. We think there is more room, but maybe not as much as we have seen in the past few quarters.

38:08 Thank you. You're welcome, Klaus. The next question comes from Sebastian Cohen from RBC Capital. Please go ahead.

38:21 Thank you for taking my question. My question relates to CT and specifically in Europe. With competition ramping up a little bit or getting more intense, do you see a price war evolving, especially for standardized products? compressors maybe can give us a bit of an idea what pricing is and the mix that resulted in the negative margin effect especially related to Europe thank you so I think in Europe what we see it's the the macro environment is not helping there are pockets of growth definitely but we are we have a good size in Europe and I don't see we lose market share in Europe and we have the tools to compete against the competition as well. We also have Chinese brands. Some of our Chinese brands are becoming global and they are now going everywhere.

39:27 So I think we have the right tools to compete against. I'm not concerned at all when it comes to Europe. I'm more concerned about Europe, about the macro environment. That is my concern. Our position is solid. And of course, we see the inflation, like Peter already explained, that is also valid for Europe as well. That's not different.

39:53 And relating to the mix, what products are then creating the negative mixers. It's standardized. It's more of your old compressor. It's geography that plays a role.

40:09 And it's also not about the deteriorating margin. It's about the fact that some products have better margins than others by default. That's a fact. And then, of course, depends on the growth of the respective product categories. And the same is valid for the markets. Some markets are more profitable than others. And depending on how you grow in those markets, it supports or does not support the margin as much. The next question comes from Max Yates from Morgan Stanley. Please go ahead.

40:56 Hi, good afternoon. I guess, look, what I'm trying to get to the bottom of is just, you know, how to think about this compressor margin over the next couple of quarters because you did, you know, 25.5% margins in the second half of last year. You've just done sort of 23.6%. And when I think about some of those things that you talked about with cost inflation, I would think that you have relatively good pricing power. And those should be things that you should be quite quickly moving on pricing to pass through to your customers. You already mentioned the FX dropped out. So I guess what I'm trying to understand is, over the next couple of quarters, as revenues grow, should we continue to treat this compressors business as a division that will grow revenues in the top line, but margins will be down year over year because of mix? Or with pricing actions, should we start to think about this is a business where it will grow revenues and margins can at least be flat or even up? I guess there's a massive difference between you doing second half margins that are 25 to 26 or 23 to 24. So I'm just trying to understand how long will Could we be in a scenario where revenues are growing and margins are down?

42:11 Because that's not a particularly good outcome for business, even though I appreciate your margins are at very high levels and it's a very successful business. Yeah, thank you for the question. I think, just to emphasize again, biggest priority number one is to continue to grow the business area well one thing that I want to highlight as well we have the short and you are right we have the the short cycle and it's the where we can actuate a little bit fast but we also have the long cycle in that the industrial compressor bucket and there we could have lead times of a year So we should also consider that there are products that we are invoicing now having this effect that we have sold last year. It's not a one size fits all here. We do have quite a lot of price activity that is definitely on the table. But of course, the environment is quite inflationary.

43:20 We will continue to work on our price and we will see how fast we can get that in the P&L. We cannot guarantee that next quarter is going to be changed. that we don't know if that is going to be reverted. We also have the acquisition of Euroclimate that will come. It has a dilutive effect, but very important for the strategy that we want to implement there. I don't know if we have any additional comment, Peter.

43:53 No, I think especially the fact that we have quite a significant amount of projects in the orders on hand, not more than usual, I would say, but we do have that with longer lead times. And of course, if we then are confronted with inflationary effects, then it becomes a little bit difficult for those specific orders to handle that from an operating margin point of view, of course. for new orders we can of course implement new prices and then depending on the lead times we will be able to realize those but I think that's important to consider so that you can't really assume kind of you know turning the corner within a week's time or in a quarter's time for that matter and then on top of that the dilutive effect of the Euroclima acquisition but just to understand but you don't have sort of rate escalation clauses on some of those contracts with six to twelve month lead times Oh, but freight could be another particular topic. Freight could be more based on the cost of the freight at the moment that the shipment is happening. That will depend on the specifics.

44:54 But it's more about the actual product pricing in the contract that has been signed with the customer potentially a long time ago, as Wagner indicated.

45:05 Okay, thank you very much.

45:07 Thank you, Max. The next question comes from Alex Jones from BOFA. Please go ahead.

45:16 Thank you. Another question on a slightly different part of the business gas and process. Can you just talk about the project pipeline you're seeing and how you feel about the next few quarters? I guess Q2 was exceptional, but this quarter also sounds quite strong. So should we think about this quarter being the right run rate or something between those two being the outlook for the next few quarters? Thank you. Yeah, I think we do have a strong pipeline that can be transformed in orders. So we remain positive about the environment. We are exposed to several market segments like LNG. This quarter, we didn't have LNG orders coming from Korean shipyards, for instance. But I mean, Chinese chipyards did very well for us. This quarter is always a mix, but we remain positive because we are exposed.

46:12 A big surprise this quarter was a heat pump for district heating, which is quite a large compressor, quite nice order. So I think they are very well positioned to continue to grow. There will be variations quarter on quarter, but the environment continues to be positive for gas and process.

46:37 And referring to last quarter, I would really like to underline again the exceptional order intake for gas and process in Q2, with a lot of orders coming in at the same time, like we've seen in other quarters in the past years. So I think it's a bit tricky to use that as a reference quarter or to kind of put that into the mix to calculate an average. I think that's probably kind of the absolute record quarter that you then kind of put in there and that would be probably a little bit too much. Thank you. You're welcome. The next question comes from Timothy Lee from Barclays. Please go ahead.

47:22 Hi, thanks for taking my question. I would like to ask on VTA order. So what's the lead time for VTA at this point in time? And in terms of customer activities, how do you see the behavior changing?

47:37 I think in the last quarter you were mentioning that

47:40 was like some elements of pre-ordering. How's the situation look like this quarter? And what should be the right level of orders that we should think about in this couple of quarters, as long as the year-on-year growth is kind of already high, so the comps could be difficult. But what should be the right order level that we should be expecting in the next couple of quarters? Thank you. Talking about the other levels, we saw a little bit more pre-ordering this quarter. That is fair to consider. Some key accounting, especially the home-to equipment where we sell to some process to OEMs, we saw that a little bit more pre-ordering.

48:32 pre-ordering that they want to really secure some production slot. I think it's fair to say that we saw that in this part. What we see now with the semi-customers, the biggest priority now is that we focus on output. And I think the biggest discussions between ourselves and our customers is output. not so sure if they will focus too much on placing order because they have done quite a lot now in Q3 I'm not saying that it's going to be good or bad Q4 but I think the focus is to from our side and we feel the same from our customers it is to get the output

49:21 And then when it comes to lead times, if I may add, I think typically we would talk about three to six months. But now, given the amount of orders in the pipeline, this might be a little bit longer. But I think in the end, what matters, of course, is that we continue to be better than our competitors at delivering the products to our customers. And I think that will help us to to build out market share in the market. And on that, Peter, I must say I feel quite confident that we are in a very strong position to have a very competitive lead time.

50:05 Thank you. The next question comes from Edward Hussey from UBS. Please go ahead.

50:18 Thanks for taking my questions, too, if I may. Just sticking to VT for a second, I mean, you mentioned that the demand growth is pretty broad-based from a regional perspective. I'm just wondering, going forwards, are you sort of anticipating faster growth in the U.S. to Asia? And then could you also maybe just talk through your sort of competitive positioning in the US relative to Asia within Semi's vacuums? Maybe just start off with that one actually. Yeah, we are in a strong position in Asia. And when I talk Asia, I'm also including China. They are very competitive. in both as well in Asia as in North America we remain quite positive I would say there are new players in the market I will not mention geographically but any new player we are in touch with them new players in process tools in in some developing countries some new countries uh so i think we are we are really present in in everything that is going on around semiconductor vacuum i i feel quite confident doesn't mean we will get uh all the market share in in these new players but we are in a in a solid position because if you look we have I I can say with a good level of

51:53 confidence we have the highest capacity of dry vacuum pump production we are scaling up and we are prepared to do more if we feel that the market demands will continue or if if we'll go up so I think we we have the highest capacity we are increasing and we are analyzing the market. If we feel the need, if new players will come and they need more, we will be prepared for that. I think that is for me the most important and I feel quite confident about that.

52:33 and I think also supported by a super strong geographical local for local setup across the different continents I think is an absolute strong argument for our customers to work together with us.

52:49 Okay, thank you. And then also you mentioned pricing being relatively tricky in VT given the creation of customers and them having high pricing power. But I guess compared to previous cycles, are the pricing discussions getting easier given, you know, vacuum as a total percentage of wafer fab equipment spend is actually shrinking. So, you know, relative to the entire semi capex, it's becoming a smaller and smaller fraction. So it could become easier over time. Yeah, I would say that when it comes to price, I think Peter already gave quite a lot of information. The only compliment I want to give is There are a lot of activities ongoing, even if they are big players. We also have agreements and the agreements, they expire in different dates.

53:40 So we have a lot of activity ongoing to reach better price levels. But that will come step by step because of the agreements in place.

53:56 Okay, very clear. Thank you.

54:02 We have time for one last question, I believe. The next question comes from John Kim from Deutsche Bank. Please go ahead.

54:10 Hi, good afternoon. I'm wondering if we could focus down into VT for a moment. Do you have any sense, given the strong demand and order take the last few quarters, how much is going to creation of new facilities or fabs versus better activity levels, more production at existing customers? It's a bit difficult for us to say, but you know how they operate in this market. First, they built what I call the vessel, the premises and everything, the utilities, but not the process tools and not the vacuum pumps. They first ordered the process tools and the vacuum pumps will come later. What we see, it's a bit of a mix.

54:59 There is a lot of population of existing fabs that were built, for instance, last year. Now they are populating with process tools and then they require our vacuum systems. And there are, we also see new announcements, new players that might come into the market as well. And that we are also involved. but I don't have an exact figure to tell you of how much is going to green fields or just extending new facilities. That number I don't have because I see both in our figures, extensions of new fab, extensions and new fabs. And there are quite a lot of announcements already going on about new players that we will also be participating.

55:56 Okay, thank you. Thank you, John. We think with that, we have come to the end of our earnings call for the third quarter of 2026. Again, I would like to thank all of you for your attention, for your active participation and your questions. And we look forward to meeting you in the coming months on the road. Thank you. Bye bye.

Speakers

Peter Kinnart

Chief Financial Officer

Daniela Costa

Analyst, Goldman Sachs

Claes Berglund

Analyst, Citi

Sebastian Cohen

Analyst, RBC Capital

Max Yates

Analyst, Morgan Stanley

Alex Jones

Analyst, Bank of America

Timothy Lee

Analyst, Barclays

Edward Hussey

Analyst, UBS

John Kim

Analyst, Deutsche Bank