Replay available

Alicon Castalloy (NSE:ALICON) Q2 2027 Earnings Call

Alicon Castalloy (NSE:ALICON) Q2 2027 earnings call, held 2026-11-16. Watch the replay and read the transcript on 6ix.

Mon, November 16, 2026 at 6:58 AMendedReplay
Alicon Castalloy (NSE:ALICON) Q2 2027 Earnings Call
Company
Alicon Castalloy Limited (NSE:ALICON)
Period
Q2 2027 earnings call
Date
Mon, Nov 16, 2026, 6:58 AM ET
Replay
Watch the replay on this page · 1 h 14 min

On 6ix: 6ix.com/event/alicon-castalloy-limited-alicon-q2-2027-earnings-call

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Ladies and gentlemen, good day, and welcome to Alicon Castalloy Limited Q2 and H1 FY 'twenty seven Earnings Conference Call. As a reminder, all participant lines will be in a listen only mode, and there will be an opportunity for you to ask questions after the presentation concludes. Please note that this conference is being recorded. I now hand the conference over to Mr. Mayank Vaswani from CVR India. Thank you, and over to Mr. Vaswani. Thank you, Neera. Good morning, everyone, and thank you for joining us on Alicon Castalloy Limited's Q2 and H1 FY 'twenty seven earnings conference call.

0:48 We have with us on the call today Mr. Sumit Batnagar, Group CEO and Mr. Vimal Gupta, Group CFO. Mr. Batnagar will begin by sharing his perspectives on the industry environment, the business performance as well as the growth plans. Mr. Nimal Gupta will then take you through the financial and operational performance for the quarter and the half year. Before we begin, I would like to point out that some of the statements made in today's call may be forward looking in nature, and a disclaimer to this effect has been included in the earnings documents that have been shared with all of you earlier. I would now like to hand over the floor to Mr. Sumit Bhatnagar. Over to you, sir. Thank you, Mac, and good morning, ladies and gentlemen. Thank you for joining us. As I completed my two quarters after taking the charts, I'm very glad to be here presenting to you the results of quarter two.

1:41 Let me first begin with industry environment and the demand trends for the last quarter. The domestic automotive industry continued to demonstrate a healthy demand momentum. Industry comparison in our highlights show automotive market growth of around 19 in q two on y o y basis. Adjusting for the oil price inflation, Alicon has grown by 24% y o y in q two. This growth in tonnage and revenue reflects the contribution from customer programs as well as the underlying demand environment. For Alicon, the encouraging aspect is that our domestic business continues to grow ahead of the market. This reflects our ability to capitalize on favorable industry conditions, the contribution from the new customer programs, high share of business with existing customers, and the increasing value of components being supplied.

2:38 Our market share, especially in cylinder heads to Indian commercial vehicle business, is progressing very well, rising from about 13% in the previous financial year to 23% in h one of FY twenty seven. We expect it to further increase gradually by the end of the current financial year. Several programs secured in earlier quarters are moving into serial production of scaling up the customer requirements. As these programs mature, we expect commercial vehicles to become an increasingly important contributor to our domestic business. Our two wheeler business has benefited from healthy industry demand and stronger offtake from key customers. Our strategy is not simply to pursue additional volumes.

3:24 We are more focused on higher displacement platforms, more complex applications, and products that offer better value addition. In passenger vehicles, our relationship with the leading OEMs continue to provide opportunities across conventional, hybrid, and electric vehicle platforms. We remain technology agnostic with the objective of applying our engineering and the manufacturing capabilities across different powertrain architectures. Talk quickly, a brief on the business results for the previous quarter. I'm very pleased to share with you that the quarter two FY twenty seven has been another milestone quarter for Alicon. We reported total income of 652 crore, which is the highest ever in a single quarter. The revenue increased 12.6% sequentially on a quarter to quarter basis and 50% on year to year basis.

4:18 After adjusting for the impact of alloy price increases, the revenue grew 11.3% sequentially and 24% on year on year basis. For those who are also tracking the volume growth, I can share you that the tonnage increased around 15% sequentially and 19.3% year on year on a year basis. What is particularly encouraging is that the growth is increasingly being supported by underlying business momentum. We are seeing higher customer offtake, a richer product mix, and a growing contribution from the new programs. The thrust towards higher complexity we... Complexity is visible in our value addition metric, which increased 30.4 sequentially and 22% year on year.

5:05 We reported a double digit profitability growth as EBITDA increased 18% sequentially and 14% on a year on a... Year on year basis, while stand alone EBITDA itself rose 31% on Y o Y basis. At the same time, continuing cost inflation across the commodities impacted by the war did constrain the profitability growth to some extent. We continue to take this up with the customers and seek compensation. Alongside this, we are working on productivity and process improvements. There is still work ahead of us, but we are focused on ensuring that top line growth translates into stronger and more sustainable profitability. In our previous interaction, I spoke about reset, refocus, and rebuild, and the priorities we had established for Alicon.

5:53 Our objective is to create a more agile, efficient, customer focused organization with greater emphasis on value addition, operational excellence, and returns on capital. Let me take you through the developments in our business during the quarter and how we see the opportunities ahead. Moving to the business development section. We continue to make encouraging progress in strengthening our customer portfolio and converting our order pipeline into production. The programs secured over preceding quarters are progressing well, and we are beginning to see their contributions reflection in our operating performance. The quarter brought promising new business acquisitions. One important win is a major hybrid vehicle program. This business is expected to double our current revenue in hybrid vehicles, and we will continue to serve almost 100% of hybrid vehicle cylinder heads in India.

6:48 This strengthens our presence in a segment where we are already well positioned. We also acquired a new cylinder head business from a major Indian OEM in Western India. In the tractor segment, Alicon has entered a nonautomotive product category with an integrated cylinder head and air intake manifold. This is a new product category for Alicon and gives us an opportunity to apply our costing, machining, and engineering abilities in an adjacent application. These are important not merely for incremental revenue. They strengthen our presence on customer platforms and create opportunities for additional products and higher share of business over time. A key element of our strategy is to move progressively towards technologically advanced and value added components, combining casting complexity with precision machining and higher engineering content.

7:39 A bit on our internal... International operations and diversification. Turning to our international business, the global automotive environment remains relatively challenging with the uneven demand conditions across markets. Our Slovakia facility registered sequential revenue growth during the quarter, indicating early signs of recovery followed... Following the transition from certain mature programs that had reached the end of production cycles. We recently acquired a new business from a German carmaker for our Slovakia plant. We had also won an EXL business from the same customer in the previous year. These programs are progressing through their development and production schedules. Our focus in Europe remains on strengthening the quality of our customer portfolio, enhancing technological capabilities, and improving the utilization of our manufacturing infrastructure.

8:31 We expect the recovery to be gradual supported by these new programs. Alongside automotive, we are also developing our nonautomotive business. We have established a dedicated business development focus for this vertical with the objective of using our casting, machining, and engineering capabilities across adjacent industrial applications. Applications such as components for data center cooling systems represent an opportunity to diversify our revenue streams. In addition, the new integrated cylinder head and air intake manifold programs for the tractor segments marks our entry into the new nonautomotive product category. These opportunities are at different stages of development, and we will update you as they progress. Coming to our manufacturing and operations, as our customer portfolio expands and new programs move into production, our priority is to ensure that we have the manufacturing capacity and operational capabilities to execute growth efficiently.

9:28 We are critically examining our manufacturing process to improve process capability and automate critical operations. Our key focus areas are manpower productivity and process controls. These efforts build on our broader work to improve productivity, optimize material flow, increase automation, and enhance utilization of our existing assets. We are also reviewing product and customer mix so that available capacity is increasingly directed towards application that offer higher value addition and better returns. Our objective is not simply to increase production volumes. We want to generate greater value from the manufacturing infrastructure and capital already employed. The work on our new plant at Pune, which we recently announced in the previous interaction, is on track.

10:14 We expect to move into mass manufacturing by April 2027 as committed before. We are also critically examining future strategic investments, and we will update you from time to time as those plans mature. Our capacity expansion strategy will remain aligned with the customer requirements, efficient execution, and returns on capital. A very quick brief on update on the reset, refocus, and the rebuild strategy, which I did speak in the last quarter. Here is a quick update. On the research side, we have completed the organizational restructuring with a clear focus on technology, talent, growth, expansion, and governance. The reset is intended to create the organizational strength and accountability required for Alicon's next phase.

11:03 On the refocus side, we are examining every manufacturing process to improve process capability and automate critical operations. Our focus on manpower productivity and process controls is part of a broader effort to make our operations more consistent, productive, and efficient. On the rebuilding side, we are building the new plant at Pune with investments on track and mass manufacturing expected by April 27. We are also evaluating future strategic investments. We will share further information as these plants mature. Looking at the priorities and the outlook, looking ahead, in the second half of FY twenty seven, we remain encouraged by the momentum in our domestic business, the progress of new customer programs and opportunities emerging across automotive and nonautomotive sec... Segments.

11:48 At the same time, external market remains uncertain and trends may not be uniform across segments. They will maintain a balanced approach to grow with continuous attention to customer requirements, cost competitiveness, and capital allocation. Our immediate priorities are clear. We want to execute the programs already secured, ensure timely production ramp ups, improve operating efficiencies, and progressively strengthen margins. We will continue to invest in the technologies, capabilities, and people required to support Alicon's long term growth ambitions. As I've emphasized previously, our ambition is not simply to build a larger business. We want to build a business with higher value addition, stronger profitability, and sustainable returns on the capital we deploy. The record quarterly revenue growth ahead of the market after adjusting for alloy inflation and the progress on the customer programs gives us a confidence in the direction we are taking.

12:43 Reset, refocus, and rebuild remain central to this objective. With that, I'll hand over to Vimal Gupta, our CFO, who will take you through the financial performance for the quarter. Thank you. Thank you, Sumit, and good morning, everyone. I will briefly take you through our financial performance for the quarter and the first half along with an update on margins, working capital, and capital allocation. Quarter two of FY twenty seven was another milestone quarter for Alicon. Total income for the quarter stood at 652 crores, growing 50.4% year on year basis and 12.6% quarter on quarter basis. This marks the highest reported revenue in a single quarter in Alicon's history. For the first half, total income was 1,231 crores, up 44% year on year basis.

13:36 Going during the quarter... Growth during the quarter was driven by strong trends in the domestic business. Sumit has already shared insight on the top line growth due to higher volumes and improved value addition. Addition for pricing impact, Higher prices of input, especially alloy, have also contributed to the reported top line growth. Overall, the performance reflects healthy business momentum and continued traction across our customer programs. For quarter two FY twenty seven, consolidated EBITDA stood at INR65.3 crores, an increase of 14% year on year and 18% sequentially. EBITDA margin was 10 compared to 9.5% in the preceding quarter. Adjusting for the impact of higher aluminum prices, EBITDA margin stood at 12.1%.

14:26 Profit before tax increased by 26% year on year to crores, while profit after tax grew by 27% to 17.6 crore. The impact of higher input costs remains an important consideration. Aluminum prices increased our pass through to customers, although with a time lag. We are also addressing inflation across labor, energy, freight, and other operating expenses through a combination of price recoveries and seasonal cost improvements. Our focus is on translating higher business volumes and improved product mix into stronger profitability. For H1 FY twenty seven, consolidated EBITDA increased by 11% to 120.6 crore, while profit after tax grew by 25% to 29.1 crore. The EBITDA margin stood at 9.8% as we progress through the second half. Our priority remains to improve margins through better cost absorption, operating efficiencies, and the recovery of input cost increases.

15:29 We are closely examining our manufacturing process across the margin cost, energy consumption, tooling, rejections, rework, and manpower efficiency in order to improve the underlying cost structure of the business. We are also improving utilization of our existing capacity through better metallic cost, flow, automation, a higher value product mix. The objective is to drive a structural improvement in EBITDA margin, which will then have flow through effect on profit, cash flow and return ratios. Turning to the balance sheet. Our financial position remains seem comfortable with a net debt of approximately $3.22 crore and net debt to enlighten H1 EBITDA at 1.33 times. Working capital days stood at thirty four days given the growth of business volumes and ongoing capacity investments.

16:19 Maintaining efficient working capital position and healthy cash conversion remains a key priority. Coming to capital allocation, CapEx in the first half was about 70 crores, including the leasing of 40 crores against our full year plan of about 150 crores. This includes some part of the budget of the new facility in Pune, where the investment is being placed in line with the secured customer programs. We are evaluating further capacity enhancement options in line with customer demand and OEM expansion plans. The CapEx will be funded primarily through the intellectuals. The outlook remains bright, including the order wins of the quarter. Alicon's executive order book stand at about 6,700 crore as on September 30, covering the period from 2627 up to 3132.

17:17 Looking ahead, we'll reiterate our guidance of 12 to 15% material adjusted growth of FY twenty seven. While we remain mindful of any moderation in demand, we will strive to capitalize on attractive opportunities. With that, we can open the floor for questions. Thank you very much. We'll now begin the question and answer session. Anyone who wishes to ask a question may press star and 1 on the touch tone telephone. If you wish to remove yourself from the question queue, you may press star and 2. Participants are requested to use handsets while asking a question. Ladies and gentlemen, we will wait for a moment while the question queue assembles.

18:17 First question is from the line of from Nuama Research. Congratulations, sir. Thank you for the opportunity. H1 PPT of INR42 crores, a 23% growth is a very good performance. My first question was on the orders. So you have received three orders from three customers in Q2. Can you indicate the approximate lifetime order size? And also going forward, out of the 6,700 crore pending order book, If you can indicate any major order executions that are expected to commence in H2 of FY 'twenty seven and FY 'twenty eight.

19:11 Thank you. Okay. So coming to the quarter two to business order booking, we have added eight parts from three customers. So around 95% of the business from the passenger vehicle and 5% is from the non auto. And yearly sales realization will be around $2.70 crores at the peak with these businesses. Annual. Annual. And over a period of, say, six years, this will give us roughly around 1,000 crores. Noted, sir.

19:57 And in... I mean, $2.70 crores is a large revenue number. If I take it as a percentage of last year's revenue, that is directly adding more than 10% to the revenue. So it's a large order. If you can indicate the broad time line when the commencement of the when the execution of the order will commence? Yeah. Majorly will be in 2829 because there's a lead development lead time which you know very well. So 2829, they will be hitting near about 70% of the volumes. Wonderful, sir.

20:43 And and any color on... In the near term, that is second half and next year, any major orders which we should see the commencement of execution and addition to the revenue? Yes. In this list, definitely one is... I can't name the customer names, but, yes, there are projects in EV, which we have done with a leading OEM, the global OEM, that is now going in SOP. Similar is for the global commercial market, that is for Europe and US both. So even those projects is going into SOP in the next quarter.

21:28 So that will adding up to the numbers. Few also is for... Few few is definitely what we have added recently is for the commercial and passenger vehicle segment for Indian. So parts are in development, and it's a quick realization to sales. Sure. So, Rahul, so I think while you asked that question on how much would be the sales realization out of the new projects in this second half and the next financial year. So as of now, I can tell you that around 25 to 30 part numbers are going to be newly going to SOP from now until next one year of time. It is difficult to quote exactly how much revenue they will generate in the first year of coming in because there is always a ramping up. But but I can really say with lot of confidence that 30 new part numbers or new products will be into the market in next one year of time from now.

22:30 Noted, sir. Thank you very much for that, and that gives a lot of confidence on the future outlook going forward. My second question was on export. Export, you said that there is initial signs of improvement, which we can see in the numbers. Export is at 13% share of revenue in Q2. And with that SOP of certain projects on the electric passenger vehicle side and the global CV side, how do you see this share of revenue for exports improve, say, by end of FY twenty seven and in FY '28? So this we see end of twenty seven to be near about 18 to 20% and further two, 3% add on in the subsequent years.

23:31 Wonderful, sir. Good to hear that. So so, basically, by second half of FY twenty eight, it should go back to the previous levels in terms of the revenue contribution. Sir, on H1, some housekeeping question. Trying to understand what will be the revenue share of two wheeler PV and CV in your revenue mix? And if you can also share that what is the revenue share of EV and hybrids, which you track as a percentage of revenue mix? Yes. If I talk segment wise, two will aware near about 40%. Passenger were near about 36 to 38%. Commercial was near about 18%, and rest were non auto.

24:21 And if you talk about EV and hybrid specific, EV EV were near about four to 5% and hybrid were near about six to 7%. Noted, sir. And what would be the machining share? The machining share is around 68%. Wonderful, sir. Thank you. Thank you so much for all the inputs. Best wishes for future. I have more questions, but I'll call back in the queue and come back. Thank you. Thank you, Rahul. Thank you. Next question is from the line of Kashyush Shah from Social Finance. Firstly, sir, congratulations on the strong revenue growth in Q2 FY 'twenty seven.

25:15 As you said, it was 19% volume growth this year. So I just wanted to know where... How... Where did this 19% come from? Okay. So thank you for asking this question. I think I also said that we grew 10% additionally in commercial vehicle segment. This is Mhmm. Just to tell you, this business was very, very low until last year. There were few few developments which we had completed by end of the previous financial year, and they have begun to grow now. So so most of the the volume growth came from here, and there are also some positive growth which has happened in our share of business with some other customers, which has further given us the higher volume.

26:02 Okay. So other than this, there are some deemed exports. When I say deemed exports, which are the products manufactured in India and exported by the customer, which are based out of South India. There was a massive growth in their numbers, which has also contributed to a positive volume growth in our numbers. While it is not comparable to the market growth, but that's a clear volume growth to Alicon, which is in the region, while it's a domestic sale. So there are two such customers mostly based out of Chennai, but all these products go to the the European or The US markets. Okay. So so h one revenues were almost around 1,225.6 crores. Or do we wish to deliver the revenue guidance to of $90,190.50 crores of FY twenty seven?

26:57 So I think Vimal did mention little bit about that in his speech. See, see, we are we are looking definitely for a better revenue in this financial year. Always always in automotive industry, q three generally has lot of customers' slowdowns and shutdowns. So, generally, it is not a very aggressive quarter, but quarter four is very aggressive. We are looking for a revision to this for sure. Overall, like, said that adjusted for ALI because the sale increase, which has happened because of the ALI, it really don't call it as a true growth. So adjusting for it, we are looking for at least a 12 to 15% of growth over the over the previous year. I think this is what it is right now, around 15%.

27:43 Adjusted for ALICON. Okay. And how do you see the commodity trends for the remainder of '27? And what could be the grow... Revenue growth outlook next year considering the commodity prices? So on the commodity side, main... Our raw material is the aluminum. So now we are seeing some softening in that because there is a... Now big supply just started from the Vietnam, Indonesia. So we believe that in the month of... Because already we have seen some price decrease in the month of November, and December, we are expecting further decrease. So, hopefully, there will be a decrease of approximately around 20 to 25% overall in the next... Means we compare from the September till December.

28:38 So in the... Within a quarter, 20 to 25% decrease we are expecting. Mhmm. And, sir, of... What percentage of raw material price inflation was... We were able to pass on this for h one... The h one? That is a 100 we do. Fully, it was passed on. Okay. And so my other question is since we are... Our new plan is commissioning from '28 of the... '28, so April 27, what revenue growth outlook do we have for '28? See, usually, as a plant starts, it it goes into the ramping up stage.

29:26 So I think the revenues which we are looking from the from the first year is going to be around just just let me just look at the numbers. Yes, sir. So around around... We can we can expect about about hundred and twenty to hundred and fifty crore coming in the first year from the new plant. Okay. In the first year. Around... Okay. So around 10% or I'm considering... Sorry. Not 10%.. Yeah. The first year, because it will be a ramp up, but we will... The real numbers we will see from 2029.

30:11 Mhmm. Great. Great. Sir, coming back to the margin on the operating margin, EBITDA margin, historically, we've been operating at around 12%. When do we expect to regain this margin levels? How confident are we achieving of EBITDA margin of 14 to 15% for FY thirty? So first, come to the the original number of 12%. If you see that, because all these numbers, what we are seeing that is based on the lower price impact. But when we look for the additional lower, so 12%, definitely, we are going to hit in this year also. And after this, there is expectation at least that I say here around the 1% minimum growth improvement in the margins year on year basis.

31:04 Right. So we can achieve 14 to 15% in 550. Yes. Exactly. So so I can tell you this is something we are striving for, and that's the that's the key goal we take as a company. Okay. Great, sir. Sir, on a legitimate part, when do we expect DBT level profitability on Richmond Craft loan? Are you are you saying that when do we breakeven or do better in? Yes. So this year, definitely that we explained it is a challenging because there is a business overlapping means that our business is is closed and the new business team will take a little bit time. So next year, definitely, it will be positive.

31:59 Next year? Okay. Great. So one on a non auto part. So non auto segment, particularly data center and defense, when do we expect this business to start contributing to the revenues? So the data center projects, what we've already added, it is going to go in SOP in March this year. Sixth year. March next Yeah. So at this moment, what we expect still around 2%, I mean, roughly around 3 to 4 crores of sale we can still do, which may even get on the higher side. But next year, this will be going into ramp up. The good thing is the parts which we developed, they're going to, at this moment, cater to India as well as the European numbers.

32:55 But there are highly chance that we get an additional opportunity to add the Mexico location. So we see a momentum of increasing these numbers. What... At this moment, we see that we can increase our sales to near about around around 15 to 20 crores in next year. So this is on the data center coming to the other portfolio non auto as we've added also businesses this quarter from a leading non auto off highway, particularly it's a tractor segment. And the thing is these are the critical parts which Alicon is doing since ages.

33:44 And that too with the advanced hybrid... I mean, an advanced technology on that front. So we are aiming to bring this in SOP very soon in next five months. So this will further add to our portfolio. So we are aiming near about 12 to 15 crore yearly sale add on with such businesses starting from next year. Great. Sir, one question is from the CV business. How is this business with CV OEM shaping up, and what is the demand outlook from their segment...

34:29 From the segment? So so I'll tell you one thing. See, in commercial vehicle, there are not many players in the country who are into high volume commercial vehicles. Traditionally, our presence with those customers was very limited, and it was hardly contributing or making any meaningful growth into Alicon Spy. This is something which has said we have not changed. We have got some immediate businesses from these OEs where the businesses were running models and the tools have been uploaded to Alicon to get into mass manufacturing. And we have done a a very good job in this, and that's the reason it has already begun to appear into our top line as well as bottom line. This further proves we are... We we have now begun to get regular RFPs from this customer. So we definitely believe CV business will go very, very positively from here. And commercial vehicle is not only limiting to the Indian market.

35:25 Incidentally, at the same time, we are also getting very good traction from The US market. So with the existing customer, there also we are getting much... Many more opportunities, which will begin to shape up into clear commercial numbers in next one or two years of time. Okay. Sir, just coming at in one volume part. Volume growth was 19% right now, and we are expecting 12 to 13%. Is it? Hello? Yeah. So sorry. Can you say that question again?

36:14 Sir, this is going back to the volume part. We had 19% volume growth this quarter. Okay. You're saying you're saying that tonnage growth. The tonnage growth. Yeah. Yeah. Yeah. So we are expecting 20, 13% tonnage growth, is it? So So so so it it would be definitely higher than that. It would... But I am not very sure to say that it it will... Going to go further up from here. But, definitely, we are looking at around around 15% and it's growth still from where it is on a y o y. On a y o y, we said it could be actually much higher. But overall, for the year, we are looking at around 15% to plus kind of a tenant growth overall for the year. H one and h two put together. So, Prashish, mainly thing is that maybe you know that quarter three is a little bit on the downside.

37:05 So we have based on that impact, but what... So it has explained quarter four, we have a huge volume. And we are expecting a good growth, but we are conservative. I think we are extra cautious, we can say. So so because we... See, I can only tell you. Of course, we we will do everything to even take this number further out. But but to say that with the 100% confidence in such kind of markets is never an easy task, I can only tell you that you will see some positive... A very positive response from our side on this. Great. Great. I got you. So one last question. I just wanted to know what... Beyond FY 2020, specifically from our top line point of view.

37:50 Any So these are these are some of the things where we are very strategically working on. Maybe this is... I will skip this question in this meeting because it's a very strategic number, and definitely, I just don't want to throw a number in the meeting. But but I think we will... The moment we have very much clarity on thing... On this thing, we will definitely share with all of you together. And... But I can only tell you that, yes, we are working on some very aggressive plans, and soon we'll be able to share with investors on what exactly we aspire to achieve in the next four to five years of time. But we'll we'll really make a good comment on this. But today, I'll be Great. Great. No problem, sir. Thank you so much, and all the best for the team. Thank you. Thank you.

38:37 Thank you. Next question is from the line of Praneeth from SG Investments. Please go ahead. Hi, sir. Thank you for the opportunity. So first question with regards to international subsidy. Have you seen a large deep growth, and I understand a lot of the geopolitical factors causing it. So just wondering, terms of strategically, is it even worth pursuing this particular venture? And what is the plan with this at this point of time? So I think it's a very, very good question, and that's that's something which our customers also ask us in Europe. See, if you look back in last two to three months or six months down the line, there is a huge amount of pressure on these kind of formations to survive in in Europe mainly because of some extraordinary inflation from the manpower and the power cost.

39:25 But the good thing is our factory is strategically located in the part of Europe, which is growing very, very fast. That is Slovakia. They they have similar challenges, but the services are far lower as compared to rest of the Europe, and there are a lot of migrations happening from the rest of the Europe into this country. And and that is where we are very confident that this is a strategic location, and we must stay with it. And we are... We have already started aggressively looking at the customers in Europe and get some opportunities for this plan. Because this plan comes with a very niche ability to do very high technology products and not very high volumes. This is a very... It's a very good condition to win because only in the product what we make, people really want to go for higher volumes so that they can make... Realize more value.

40:17 But this is very different than that. And the moment any of the niche players in Europe, if they want high technology products, then we are the best bet for them sitting in Slovakia. So we want to stay with it, and we will make some aggressive plans for this provision to completely revise and revamp in time to come. I hope I have question. So in the future, we have more aggressive plan in terms of expanding or whatever. So for now, we're just sticking with it. Yeah. Yeah. So while... See, it it... There is a current state where there are some volumes which came to end of production and because of which we had seen a slowdown. But the the kind of projects which are already in development, they're high value products, and we are getting a much more number of inquiries that we used to get in the past. So we are on the right track. That's what I can tell you right now.

41:07 But in terms of viability, you already alluded to the fact that all the costs have increased very much. And can this particular business grow profitably? Because if the costs have grown so much and is given viable to operate the business, even the gross is my question, actually. Yeah. So so just to tell you, in the last few years, we have cut down our cost by more than 50%. So so cutting the... Cutting costs in Europe is still rather a simpler task as as it is in India. I can tell you that. But the businesses, when we win the European locations, they come at a very different commercial values. The the cost, which is not associated with the product, but the peripheral peripheral cost is also customer pays along with the businesses also.

41:54 A huge sum of cost which is... Which makes the businesses viable for a long run. So I can tell you this is a most doable thing, mister. And we are we are very, very critically monitoring every single opportunity which is coming to us. Understood, sir. Got it. Coming back to Indian operations, you specifically alluded to the fact that you did a lot of these fixing. I understand in terms of vision. You told a lot of big picture things. Could you tell, like, the most impactful one or two things that you did on the ground for us to get from first perspective? See see, if you would have if you would have seen our share of business and the pie which Rajiv spoke some time back, I think it is very clear that some of the dominant sectors, segments where we have been supplying for many, many years have drastically gone down in the total pie. And it has not gone down because we have lost the market. It has gone down because we have we have structured our investments in such a way that we move in a different direction. I can't say these things here because we cater to all the customers. But very clearly, even the businesses which we have won in the past where... And where we we intended to grow in the past, we are also critically examining them once again because we understand that these are high capital businesses, and we have to aim for higher and higher VA. So all the new businesses which we have acquired for last six months, 90% of those businesses would fall into a very high VA category, and that's a new way of looking at other... At the businesses by us. And and this is how the pie you will

43:25 see a significant change in time to come, which has already changed here. If you would have observed, it's already changed in this quarter. Got it. So, basically, we're focusing on changing the mix into higher validation mix to begin with. Absolutely. Because this is this is what... Where we differentiate ourselves. When when when there is a critical product, which is... Which cannot be made easily, then the first choice of the customers is us. Because we have actually delivered very, very critical products because of the kind of knowledge, experience, and know how what we carry for many years. And this is where we are now going to leverage more and more. Got it, sir. So is this the reason actually able to expand from our previous 12 percentage EBITDA margins to a potential 15%?

44:13 See, this one... I have to have already said that this... We will always aspire for higher and higher EBITDAs. Okay? While it may be difficult for me to put a number, but I can tell you that we will never take any target, which is an average target to be taken by any company. We will... We'll set up very, very stringent target for for us for EBITDA and the margins. Understood, sir. And coming to a decrease in expense we've had because of our past investments during the last few years, I think we had a structurally high risk to begin with in terms of our assets. And we also want to invest... Continue to invest further. I'm just wondering, as an expense, what we are capitalizing now? Is it enough for our future investments, or will it be increasing the fraction a lot more going forward? So the depreciation, what we are seeing that we already explained, like, some projects are delayed, and then now the depreciation started...

45:06 The cost has started to come. But definitely, when we are going for the expansions, the investments are there. But the aim is to improve our asset turnover issue that we are more focused like some of the expand key. We are... When we are going for the new businesses, so what kind of investments we are making, what kind of margins we are going to make on those businesses. Those are our critical areas when we finalize all new businesses. So is there any target of the investment in next two to three years in terms of annual investment focus, in terms of what amount of CapEx we'll be doing? So I think in the last call also, explained to you approximately this year, we... Our CapEx will be around 150 crore.

45:54 So... And that includes our... The new shed... What new plan we are going to start from the month of of '27. And that is the phase wise investments, and maybe when we are also planning, like, some of this expand, maybe shortly, some new investments will come up. So that... We will see that how much investments will be in 2728. But definitely, when we are looking for the growth, so investments will also go. Got it, sir. And in terms of right now, what's the tonnage at in terms of capacity, and what's the capacity utilization today? Currently, we are having a 50,000 yearly tons capacity, and currently, utilization is roughly around 82 to 84%.

46:45 Got it. And with the new plant, where will it be at? So the new plant, what we're adding up, we are adding up a a fresh capacity of of 12,000 metric tons in a year. Got it, sir. But can you expect for more traffic just because of that aggressive and have been going other categories? We'll probably need to continue to invest pretty gradually for only at 85%. That's right. So we can expect, but we can only tell you we will make an announcement on this whenever it happens. So I've already said that there are a lot of plans which are still on on the paper, and we'll come back to you as as the plan matures and they're approved by the board. But the point is right. Got it.

47:31 Got it, sir. Understood. That's it from my side, sir. Thank you. Thank you. Thank you. Next question is from from Sapphire Capital Partners. Please go ahead. Yes. Thanks for taking my question. So I just had one question. You're saying that we're expecting 12% to 15% sort of revenue growth in FY 'twenty seven. In f... In h one FY twenty seven, we've already done around 44% growth. And basis that according to the 15% growth, if we take, will regrow in h two FY twenty seven. So are we expecting some kind of market slowdown in h two, or are we being conservative and giving the guidance?

48:19 Oh, alright. So maybe let me just tell you little bit different on this. See, when we talk about growth, we say ALI adjusted growth. So when I say around 15%, that was a ALI adjusted growth. And when I when you say 44% is the total sales growth, which is including the ALI. So... But while I'm not I'm not saying that we are expecting any slowdown in the market, but generally, always quarter three is a mellowed down version of the entire financial year... Every year. So the kind of growth what we see in q one and q two, generally, '3 does not show a similar kind of growth. And q four, the market comes back due to due to the year end effect. A similar model may follow this year as well. So while the growth rates while we have said 12 to 15 adjustable...

49:10 Allowed to set growth, it could be even more than that. But as of now, because because looking at lot of volatilities, it is very difficult to pinpoint on a specific number as at this point of time. Okay. Okay. I understand. Thank you so much. Thank you. Next follow-up question is from the line of Raghurandan Anil from Nuama Research. Please go ahead. Thank you, sir, for the opportunity again. My first question was on cylinder heads. It's a major product for us, and congrats for the market share gains which you have recently seen. Can you approximately indicate what will be the range of market share in CV, PV and two wheeler segments?

50:01 Yes. We can do that, Can you just slow? You're talking about the new business wins or you're not I think he's he's talking about our market share. Is is that right, Yes, sir. Market share. The existing approximate market share in cylinder head across categories. Alright. Sure. Just allow a few seconds. So across the segments, what we see is cylinder heads in two wheelers will be in a range from 30 to 35%.

50:51 The passenger vehicle, we see this to be around 14 to 18% for this financial. And in the commercial, of the total pie, this is looking to be around 13 to 15%. But if in commercial, if we talk about the addressable market... Because around 45% of the market is the other commodity that is. But if I talk only in terms of the aluminum addressable market, so this will be near about 25 to 28. So similarly, in passenger vehicle, most of the OEMs, the bigger OEMs, they do these products by themselves. And till the time they they don't decide to offload more products, a lot of market will continue to be with them. But that new trend, what is happening is the OEMs have now begun to let go these facilities to their vendors. And then this market by by default will keep increasing this period of time. This has recently happened with one of the largest OEMs, one of the very big OEMs, and this suit will follow even for the rest of the OEMs in future.

52:05 And how much will be the shares, sir, of captive production approximately? See see, for example, a customer... The largest customer in India, they they do 85% of these products by themselves, and the remaining 15% are done by us. So Understood. Rules, it is very clear that most of the OEMs could not make more investments, and these investments will be available for the vendors. Noted, sir. Thank you very much for that. And Pune plant, $1.30 crore was the investment. And at peak utilization, what kind of a gross asset turnover can we expect considering that you are trying to be more asset light?

52:58 So at the peak, it will be three times. Noted, sir. Noted. Thank you. Thank you so much for that. And also by medium term, say, by 2030, how do you look at your ROCE targets? Because FY 'twenty seven, you should be in double digits. Would you look at moving towards 15%? By when do you expect that to happen? Like, who you are trying to push into some special areas? So I think we... You are seeing that the total discussions, so many. So our main focus is on to improve the margins and control the capital.

53:50 So definitely, the effect will be on the ROCE. So So, Rahul, but your question is valid. I think ROCE ask of 15% is a is a valid ask. I can only tell you that you will see us improving in that direction very gradually. And when we said, you will see that that we are progressing well towards that target. I can't I can't comment, but that's clearly a goal along with EBITDA what we have. This is very much a doable target. That's what I can tell you. Wonderful, sir. Thank you. Thank you so much, and wishing you all the best. Thank you, Rahul. Thank you. Thank you. Next question is from the line of Ridesh Aragandhi from Discover Capital Management. Please go ahead.

54:40 Hi, sir. Congratulations on a great quarter. So I just had a question for you with regards to your JLR order, how things were progressing, whether the product acceptance was good? And is this expected to scale up and lead to increase in the overall overall profitability? So while my colleague will give you some clarity on how JLR is going, but just to tell you, just to see the similar clarity, I went to JLR myself ten days back, and the complete manufacturing of this plant has already started. And, also, there are some numbers shared by them which they can't quote publicly, But I can tell you that they already have claimed that they have a healthy order book. Their new vehicles, which are EV vehicles, people are now expecting them to... These vehicles to be delivered to them very soon. The the manufacturing has started. Our offtake has started already for the very critical parts that we were doing for them.

55:44 The vehicle sale to the end customers will begin in quarter four of this financial year, approximately. But I can tell you the complete manufacturing plant was on full speed, making the products of subassemblies and the vehicles. So I think now finally, this vehicle is... Looks to be on track, and the complete JLR leadership is looking extremely confident on the on on on the performance of this vehicle. Yeah. I think I I... Yeah. I think the early reviews and pre bookings also, from my understanding, have been extremely strong. Sir, then just to understand, so here, our strategy would effectively be to use our existing asset base to move into more compact products leading to higher EBITDA per per ton.

56:37 Is that how we should be looking at it? And then and then incremental CapEx in strategic areas where we expect high incremental dosing. Yeah. So I think it's the right question. So just to tell you the kind of machines we we have in our product, these machines are flexible to be used for multiple type of products. The size of the machine is important. But once we talk about machines which are used to product... To produce JLR products, which are the highest of the size, I think these machines can also manufacture a lot of other products of similar size and nature. So we have various categories of machine, and every machine is flexible to produce multiple parts. So this is always very beneficial for ROCE perspective so we can really set our assets well.

57:25 So the good thing is there are no assets which are buying to a specific customer and which should not be used if the customer is not doing. That's not the case in our kind of business. You've got it. Even with the existing, actually, capacity which we have, there is still a reasonable headroom to increase overall absolute EBITDA. Yeah. That's right. See, because EBITDA EBITDA is a function of lot of other things other than the capacity. Rajiv already explained that while we are at 80% of the capacity, generally, as a as a rule, 20% of capacity in manufacturing should always be available for expansion. So that's the reason we are going for the new plant. And if required, we will also make further investments. So right now, we are in the growth phase. So...

58:13 But 20% is the capacity I would always love to have to cater to immediate requirements. And and the good thing is... And we grew in commercial vehicle segment. That was precisely because of the same reason that we had the capacities and customer wanted us to do it and record lead time. And we could only manage it because the capacities are available. So 88% is... Eighty eighty four to 85% is the capacity, but that's that's that's the most ideal capacity utilization. I would not really like to take it to 100 all the times because that much I need for any agencies or any immediate customer requirements. Got it. So... But... Yeah. But but while while we improve EBITDA, I think there are much... Many more ways which we are going to work on to be working and improving that that number.

59:01 Got it, sir. Alright. Thanks,. Thank you. Next question is from the line of Raj from TPR Capital. Please go ahead. Yeah. Firstly, congratulation on the wonderful set of results, sir. Sir, my first question was regarding the increase in receivables and inventory during the quarter. I think the receivables increased by 88 crores and inventory increased by 32 crores, and that... Those were the two primary reasons behind, you know, a lesser cash flow conversion as compared to the first half last year. So just wanted to get a better idea on what led to this sudden increase. So in this first major impact, there are two things. One is the... You've seen the growth in the sales volume impact as well as the increase in the aluminum prices. If you have seen that the... We are see... When we are looking at the receivables along with it, the payables also has increased.

1:00:01 So Mhmm. Correct. All these customers, you know, that they take time to settle it down because there is a sudden jump, and they have also major impact on their per cost. So they are taking some time. They have internal approval, some controls from their headquarters. So... But that realization will happen because now it has picked up. The price of peak. So now it started going down. So in next two to three months, I think that we will be able to realize the money from the customers. So just on the same question, you mentioned that the pass through would happen with the lag. And this quarter, since we have seen the margin go down to, you know, for first half also 9.8 as compared to 12.7 last year. So over the next two quarters, that is quarter three and quarter four, is when we should see the margins increasing because a higher pass through should happen?

1:00:54 No. No. No. This is because maybe they take time. The... This time lag is for the payments. It is not for the pass pass through. Only a cash flow impact. But there there is no impact on the margins due to this aluminum price reduction or increase. And, like like, I think we've already explained that the... If you if you do an alloy adjustment on the EBITDA, this EBITDA levels are not 9.8. This is actually around 12, which is still quite Correct. Correct. So for the full year, we'll be expecting at least... You mentioned that 1% improvement should come in on a y o y basis. So last year, we were around 12... 11.4. So this year, we should be around 12?

1:01:41 Yes. I think I already expected this year, we're expecting around 12. And next two two two two three years, so one on... 1% year on year basis. Got it, sir. And my second question was on the non auto parts, sir. I think we have made great strides in terms of setting up independent sales and marketing for the RAG vertical. We want also, you know, appointed and head for the RAG vertical. So just wanted to get more idea from you that... Because we have heard a lot of commentary in the last month over the shortage of, you know, castings, bearings, and, you know, forging equipment for defense, aerospace from global players like Honeywell as well. So just wanted to get a better idea from you that how are you seeing this space? How are the inquiries coming up to you across these two articles and railways also along?

1:02:34 So so clearly, if if there is a scarcity of costings in the global market, and this this is not only triggered in India, it is triggered globally. So you... As I said that many many many big foundries in Europe, which are announced as... To be disclosed. Now, suddenly, it is creating a lot of pull from the from the global markets from both from China as well as India. And this is a... Where the overall capacities have become a constraint. Indian market did much better than than traditional market... Traditional years of conventional times, and and that is where suppliers are also not very much ready with those high capacities. And that is all... That also created a crisis. And and and between this, the complete manufacturing machine makers, they also certainly have got very, very high order bookings as compared to the past.

1:03:26 So so all the challenges which could hit any company has also affected us equally. That's the reason we have proactively ordered our equipments and machines. We have not only limited our scope looking at machines in the Indian markets. We have also looked at the global markets. But as of now, we don't see any significant challenge in... To us. Just the lead times would have increased by a month or two in some of the machines which are which are critical in nature. Otherwise, it is not really affected as much. And, sir, in terms of the pipeline for defense or aerospace verticals, any kind of update in terms of the RFQs or any particular traction that we're getting across with any OEM or any PSU? See, I can tell you that RFQ RFQs keep coming.

1:04:13 But... So, generally, with our strategy where we are looking for only higher BA products, high value addition products, more complicated products, it is not exactly the same case in defense aero... Aerospace as of now. We are trying ourselves to keep away from more commoditized product, but we are still aggressively looking into these markets. We have a guy who is a expert with whom we have hired as an expert. We are getting the RFQs. We are examining them. And as they convert into a a business, we will definitely make a communication on that. But I can tell you we are getting the RFQ, but we are examining them very, very critically. We don't want to just simply increase our non auto sector and compromise with any of the margins anyways. Got it. And as you mentioned earlier on the data center business, so can you just give us a bit more light about the compressor?

1:05:10 Like, you've mentioned a specific customer, Danfoss, who had this turbo core compressor where aluminum casting is involved. You mentioned over the last call that there are some seven or eight more parts. So how is that pipeline looking like in terms of tapping those new customers? Yeah. We we see a great opportunity with this customer where we submitted the samples and customer had appreciated because these were little critical traditional... Compared to traditional parts. So we have now follow-up meetings lined up with them, and we are expecting... We've already received few RFQs, and we are expecting some orders to convert in coming quarters with them. So we should expect a formal announcement soon?

1:05:59 Yes. You might get some announcements with this account also going forward. Got it, sir. And just my last question again, just coming back on the new plan. I think we are investing around $1.25 crores. And the last call, you had mentioned that we were looking at the revenue of 500 crores over the four, five years of business. So wouldn't that be an asset turnover of close to four times, sir, as opposed to the three time you mentioned? Any particular I think it's... I'm I'm really very happy to hear this comment. You're right. It says around 500 crores, and that could be a slightly higher effect turnover issue. But while this plan is still in development, we are getting a lot of inquiries even for this plan.

1:06:48 So overall, this number can actually vary from three and a half to four. It can be even little more than that. It is difficult to comment on it on it very quickly, but it will be a good a certain ratio. Could It be even more than that. And it is already booked. Yeah. Please, sir. I'm saying that if this... Whatever the capacities we are going to put in the new plant, it is already fully booked by the customers. Okay. And just my last question, sir. I know we are also looking at, you know, additional opportunities in terms of CapEx. I think last call, you had also mentioned something very interesting in terms of inorganic growth opportunities. So anything that we have update on this that you would like to share? Not in this call. We will definitely come back to you once it matures.

1:07:38 Got it, sir. Thank you so much, sir, and good luck for the next couple of quarters, sir. Thank you so much. Thank you so much. Thank you. Thank you. Next question is from the line of from from All Invest Securities. Please go ahead. Good afternoon, sir. One question from my side. So stand alone profits Hey, Desh. Sorry to interrupt. Can you speak through the handset, please? Hello?, you're sounding distant. Can you please speak through the handset? I'm speaking from handset only. I'm audio now. Better. Thank you. Yes. Yes. So your stand alone pack was around 20.7 crore in q two, while your consolidated pack was around 17.6 crore, implying roughly of 3.1 crore quarterly loss back from European things. So what exactly quarterly revenue needed for the Litchburn Castalloy to breakeven?

1:08:44 And how much of the revenue loss from sustaining legacy program is already logged in via SOP launch to hit your Q4 FY twenty twenty turnaround target? For this quarterly, we need around... Because it totally depends on the case to case basis because some businesses are with the higher margins, some are with the lower margins. But on an average, you can say approximately 30 to 40 crores sales is required to breakeven on quarterly basis. So... And the maximum part will be approximately more than 50 crores a quarter. We already lost the legacy businesses.

1:09:32 Okay. And next question, of all the... With global business now, you are at 13% of revenue. And the European energy and the inflation remaining structurally headwind. So how do you justify deploying incremental manufacturing CapEx in Slovica versus keeping Austria? And Slovica strictly as an r and d and prototyping certain while shifting mass production to new global wins wins to India. See see, what happens is there are there are a lot of customers. There are very lot of niche customers who are into, for example, racing cars or or some of the very niche segments. When they need parts for for their vehicles, they would never go and source them from India or China.

1:10:23 These are the parts which could be low point quantity, but very, very high technology parts which are which are manufactured very carefully. And this this is a big business in Europe, and it is it is very unlikely that they would like to outsource this business to any part of the global world. And that's number one that you need a plant in slow in Europe, which is able to cater to these requirements. A lot of such parts we already made there. That's number one. Number two, I've already said that with with the kind of current tense which is happening in Germany, especially in France or Italy, most of the foundries are either closing down or they're trying to shift some of the businesses to Eastern Europe, like the Slovakia or Czech Republic or somewhere closer to that. So this is a place which is still a sought after place by most of the people to make investments and do manufacturing.

1:11:16 As of now, while they... There... It's only a time where they have lost some of the legacy businesses and they are in this state. But I'm quite sure that the kind of inquiries we are getting for this plan and and the way we are looking for the future growth, it is only a matter of time this plan will be really contributing very positively to the Alicon's on story. So as of now, we are definitely not looking at rail... Winding it up or or looking at doing those parts from India because this is not what we're looking at. In fact, we... On the contrary, we give option to the customers to choose if they want to buy from Europe or they want to buy from India. So... And and this is how we have all... Already added some business in Europe where it is... It could be more viable to produce those parts in Europe rather than producing them in Alicon India.

1:12:08 Okay. Okay. Thank you. Thank you. And I'll hand the conference over to the management for closing comments. Alright. Thank you, everyone, for your questions and for taking the time to join us today. We value our engagement and appreciate your continued interest in Alicon. As we've discussed, quarter two has been an encouraging quarter for us with strong profit growth, improving customer traction, and progress across several of our key initiatives. While the operating environment continues to present its challenges, we remain focused on building on this momentum. Our priorities remain clear, executing the programs we have secured, strengthening our customer relations, improving operational efficiencies, and ensuring that our growth translates into better profitability and returns.

1:12:55 The initiatives under reset, refocus, rebuild our progress in. And while some of these efforts will take time to deliver the full benefits, we remain committed to... And disciplined... Committed to disciplined execution. We'll also continue to be mindful of capital allocation, focusing our investments on areas that support sustainable growth and create a long term value. We are encouraged by the progress made so far, and we'll remain focused on building a stronger, more efficient, and more profitable Alicon. We look forward to updating you on our progress in the coming quarters. Thank you once again for your time and continued support. Thank you so much. Thank you very much. On behalf of Alicon Castalloy Limited, that concludes this conference. Thank you all for joining us, and you may now disconnect your lines. Thank you.

Follow Alicon Castalloy Limited into a list and get an email when it puts out news.

Latest news releases

Companies on this call

More from Alicon Castalloy Limited