Cummins Inc. · NYSE:CMI

Cummins — Investor Presentation (December 2008)

15 slides from Cummins's investor presentation, December 2008

  1. Slide 1: PowerCommand 1.2 Control System

    PowerComand 1.2 ® Control System 1302 Control System

  2. Slide 2: What do Customers Want?

    What do Customers Want? Reliability  “After all, I bought it to get more reliable power.” Performance  “Make my stuff run just like it’s on the utility.” Low Cost  “I really didn’t want to buy one anyway.”

  3. Slide 3: PowerCommand 1.2 Control System

    PowerCommand 1.2 Control System! Standard featured non-paralleling genset control system P ow erCommand 1.2 HMI 220 PCC1302

  4. Slide 4: PowerCommand 1.2 Control Features

    PowerCommand 1.2 Control Features Features: Digital Full Wave SCR AVR for Shunt or PMG Excitation with torque matching Digital Electronic Governing With temperature compensation and Smart Starting SAE J1939 Interface to Full Authority Electronic engines Engine Protection Oil Pressure, Engine Tem

  5. Slide 5: PowerCommand 1.2 Features Beyond the PCC1301

    PowerCommand 1.2 Features Beyond the PCC1301 . . . PMG Excitation  Better motor starting  Better for non-linear loads  Sustain short circuit faults HMI220: Larger display  More information per screen  Reduced setup time  Easier navigation  Enhanced serviceability  Multiple language support

  6. Slide 6: PowerCommand 1.2 Control System Components

    PowerCommand 1.2 Control System Components Main Control PCC1302 Operator Interface HMI220 Governor Power AUX105 stage AC Bargraph HMI112 Remote HMI113 annunciator Auxiliary I/O AUX101 Service Tool InPower

  7. Slide 7: Control System Architecture

    Control System Architecture HMI220 HMI114 HMI113 AUX101 Option Option PCCNet AUX102 (4 wire) Option J1939 InPower Engine (Service Tool) Converter J1939 Alternator Engine Modbus - iWatch100 PCC1302 - BMS

  8. Slide 8: Control System Architecture

    Control System Architecture HMI220 HMI114 HMI113 AUX101 Option Option PCCNet (4 wire) AUX102 Option InPower (Service Tool) Converter Alternator AUX104 Engine Modbus - iWatch100 PCC1302 - BMS

  9. Slide 9: Control System ANSI Diagram

    Control System ANSI Diagram GOV ACTUATOR ALTERNATOR A KVA 65 90 51 Key: A Ammeter Surge Suppressor 3 KVA Volt-ampere meter V Voltmeter Hz Frequency meter V Hz 27 81u 59 27 Under voltage 3 51 Over current 59 Over voltage 65 Governor 81u Under frequency 86 86 Lockout 90 Voltage regulator TO LOADS

  10. Slide 10: HMI220 Operator Interface

    HMI220 Operator Interface Features:  Back-Lit Graphics 128 x 128 LCD Display  English Text and Symbolic Overlay  Multiple Language LCD Screens  Dedicated Manual/Off/Auto function switches with mode LED’s and configurable access code (key switch)  Status LED’s for genset running, remote start in

  11. Slide 11: HMI114 AC Bargraph Interface

    HMI114 AC Bargraph Interface Features:  Full Analog AC Metering  Color LED Bargraph (green, red, and amber) to quickly indicate normal and abnormal operation  Indication of: Three phase current Total KVA (PowerCommand 1.X compatible version) Total KW (PowerCommand 2.X and 3.X compatible version)

  12. Slide 12: HMI113 Remote Annunciator

    HMI113 Remote Annunciator Features:  Visual and audible annunciation for up to 20 genset faults.  Meets NFPA Requirements  Discrete wire or network connection to the 1301  Plug and Play Networking  RS485 Connection (up to 4000 feet)  Configurable LED’s (color, flash, horn)  Four configurable

  13. Slide 13: AUX101/102 Input / Output Module

    AUX101/102 Input / Output Module Features:  Outputs – 8 form-C Relays Outputs are configurable to activate on specific shutdown or warning Default output configuration supports NFPA110 faults  Inputs –Digital Inputs can be configured to be either Analog or Digital. Digital are field configurable f

  14. Slide 14: Inpower Service Tool

    Inpower Service Tool Features: Calibration downloads Feature downloads Capture controller data to a file Save adjustments Parameter Search View fault information Printing features Engine protection tests Monitor Parameter values Graphical strip chart for Parameter monitoring Compare utili

  15. Slide 15: Why Cummins PowerCommand?

    Why Cummins PowerCommand®? PowerCommand® is our standard control system on generator sets 25-2000 kWe Over 100,000 units in field and over 10 years experience History of high MTBF Best combination of Reliability, Performance, and Cost Effectiveness available.

Cummins — Investor Presentation (December 2008) on 6ix