GSI Technology, Inc. · NASDAQ:GSIT

GSI Technology — Investor Presentation (January 2013)

14 slides from GSI Technology's investor presentation, January 2013

  1. Slide 1: Best in Class Memory Subsystems with Controller IP & SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs

    Best in Class Memory Subsystems with Controller IP & SigmaQuad-IIIeTM/SigmaDDR-IIIeTM SRAMs January 2013

  2. Slide 2: Now Available: A World Class Memory Subsystem

    Now Available: A World Class Memory Subsystem • Silicon-validated memory controller IP • Xilinx Virtex-6 and 7 Series FPGAs • Altera V5 FPGAs—mid-2013 • Free to GSI customers • 72Mb SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs • Qualified and in volume production • 725 MHz clocks  1.45G transactions/second •

  3. Slide 3: GSI Memory Controller IP: Frequently Asked Questions (1/2)

    GSI Memory Controller IP: Frequently Asked Questions (1/2) • Why do I need it? • High speed memory interface design is a chronic problem due to narrow valid-data windows on address and data lines. These windows are further reduced by variations of physical signal trace lengths, capacitances, inducta

  4. Slide 4: GSI Memory Controller IP: Frequently Asked Questions (2/2)

    GSI Memory Controller IP: Frequently Asked Questions (2/2) •Q: What files and documents are available? • FPGA Development Environment: source code, simulation model, user configuration file, IP user guide, software user guide • PCB Hardware: Schematics, layout Gerber files, Bill of Materials, Compon

  5. Slide 5: SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: Benchmark Data

    SigmaQuad-IIIeTM/ SigmaDDR-IIIe SigmaQuad-IIIe/SigmaDDR-IIIe TM SRAMs: Benchmark Data SRAM Read-Only Clock Rates Transaction Rates Bandwidth Configuration: Efficiency x36 x18 x36 x18 x36 x18 SigmaQuad-IIIe 1.4BT/s 1.45BT/s 100Gb/s 52Gb/s 50% 2-word burst SigmaQuad-IIIe 700 MHz 725 MHz 700MT/s 725MT/

  6. Slide 6: SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: Advantage #1—Reuse What Works

    SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: Advantage #1—Reuse What Works • BGA Package with 1 mm Pad Pitch • No special assembly requirements • Conventional Control Truth Table • Familiar Read and Write protocols • Echo Clocks and Output Valid Signals • DLL-controlled Output Data timing • Programmable Outp

  7. Slide 7: SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: Advantage #2—Improvements on Earlier Generations

    SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: Advantage #2—Improvements on Earlier Generations • Better Signal Integrity • Larger Output Data Valid Window • New High Performance Pinout • User-programmable ODT (On-Die Input Termination) • Programmable value • Selectable input pin coverage • KD & KD# Data Input

  8. Slide 8: Higher Performance Pinouts

    Higher Performance Pinouts SigmaQuad/DDR: IIIe SigmaQuad/DDR: I, II, II+ Key 1 2 3 4 5 6 7 8 9 10 11 12 13 A 1 2 3 4 5 6 7 8 9 10 11 VDD A B B VDDQ C D C VREF E D F E VSS G F H A G J H CTRL K J L D M K N L Q,CQ P M CK R N T P JTAG U R V MISC W 165 BGA : Y 11 x 15 Array, 15 x 17 mm, 1 mm pitch 260 BG

  9. Slide 9: Improved Data Valid Windows

    Improved Data Valid Windows ~760ps ~780ps 165 BGA @ 333 MHz Modern 260 BGA @ 500 MHz 40ohm driver; 60ohm thevenin termination 40ohm driver; 60ohm thevenin termination 666 MHz data rate; 1.5 V output voltage 1.0 GHz data rate; 1.2 V output voltage Result: ~780ps eye @ 1500ps Tcycle Result: ~760ps eye

  10. Slide 10: SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: A Solid Migration Path (1/2)

    SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: A Solid Migration Path (1/2) 72Mbit 2013 Introduction 144Mbit Device Options 72Mb 144Mb 288Mb 288Mbit SIO-B2, x18/x36, RL = 3 725 MHz 675 MHz 500+ MHz SIO-B4, x18/x36, RL = 3 725 MHz 675 MHz 633+ MHz CIO-B2, x18/x36, RL = 3 725 MHz 675 MHz 633+ MHz Additional Opti

  11. Slide 11: SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: A Solid Migration Path (2/2)

    SigmaQuad-IIIe/SigmaDDR-IIIe SRAMs: A Solid Migration Path (2/2) 2013 Introduction 72Mbit SigmaQuad B4 72Mb IIIe 144Mb IIIe 288Mb IIIe Read Latency 2 3 3 3 144Mbit Write Latency 1 1 -1 1 288Mbit Clock Frequency 450 MHz 725MHz 675 MHz 633 MHz Address Rate 450 MHz 725 MHz 675 MHz 633 MHz Data Rate 900

  12. Slide 12: Design Schedules

    Design Schedules 2012 2013 2014 2015 I I I SigmaQuad/ SigmaDDR SRAMs (3rd Gen) with GSI Memory Controller IP Altera S5 FPGAs TBD Performance Xilinx V7 FPGAs 725MHz Xilinx V6 FPGAs ~525MHz : SigmaQuad/ SigmaDDR SRAMs (3rd Gen): | 288Mb / 633MHz ( DESIGN 260p BGA 144Mb / 675MHz ( DESIGN 260p BGA 72Mb

  13. Slide 13: More Questions?

    More Questions? Features, downloads, documentation: IIIeinfo@gsitechnology.com IP installation / tuning / debug: apps@gsitechnology.com 13

  14. Slide 14: Thank You.

    Thank You. ream

GSI Technology — Investor Presentation (January 2013) on 6ix