Business
Endurance Reports First Diamond Drill Assays from Eagle Zone Including 10.94 GPT Gold over 5.4 Metres and 7.49 GPT Gold over 9.0 Metres
Vancouver, British Columbia--(Newsfile Corp. - November 29, 2021) - Endurance Gold Corporation...
About this update from Endurance Gold Corporation
[{"type":"text","content":"Endurance Reports First Diamond Drill Assays from Eagle Zone Including 10.94 GPT Gold over 5.4 Metres and 7.49 GPT Gold over 9.0 MetresVancouver, British Columbia--(Newsfile Corp. - November 29, 2021) - Endurance Gold Corporation (TSXV: EDG) (the \"Company\") is pleased to report the first assay results from the 2021 diamond drilling program at the Reliance Gold Property (the \"Property\") in southern British Columbia. The Property is located 4 kilometres (\"km\") east of the village of Gold Bridge with year-round road access, and 10 km north of the historic Bralorne-Pioneer Gold Mining Camp which has produced over 4 million ounces of gold. As announced on November 3, 2021, the Company completed 4,329 metres (\"m\") of diamond drilling in twenty-two (22) drill holes at the Eagle and Imperial Zones. Assay results have been received from the first four (4) diamond drill holes completed at the Eagle Zone and assays are pending for the remaining eighteen (18) holes. Locations of the reported diamond drill holes are shown on Figure 1. DDH21-003 intersected gold mineralization from surface and returned 6.08 grams per tonne (\"gpt\") gold over an interval of 10.9 metres (\"m\") with a high-grade interval of 10.94 gpt gold over 5.4 m. The hole was drilled into the Eagle 1 outcrop where channel sampling, reported on October 26, 2020, averaged 5.89 gpt gold over 31.5 m. The hole was drilled at an azimuth of 080 degrees and angle -45 degrees. Core recovery averaged 78% over this mineralized interval. A photo of the oxidized drill core intersection is shown on Figure 2. This hole was extended to a total depth of 215.5 m to provide footwall geology, structural and alteration data. DDH21-004 was drilled from the same setup as DDH21-003 at an azimuth of 080 degrees and steeper dip of -70 degrees. The hole also intersected gold mineralization from surface and returned 4.44 gpt gold over 19.0 m with a high-grade interval of 7.49 gpt gold over 9.0 m. Core recovery in this hole averaged 97% over the mineralized interval. A photo of the oxidized drill core intersection is shown on Figure 3 below.Gold and antimony results for each of these diamond drill holes are summarized in Table 1 and Table 2 below. Diamond drill holes DDH21-003 and DDH20-004 were drilled at the same location as two earlier reverse circulation (\"RC\") drill holes completed in l...