Faraday Copper Expands Near-Surface Mineralization in the American Eagle Area and Identifies Exploration Upside at the Sunrise Trend

About this update from Faraday Copper Corp

VANCOUVER, BC / ACCESS Newswire / June 19, 2025 / Faraday Copper Corp. (" Faraday " or the " Company ") (TSX:FDY)(OTCQX:CPPKF) is pleased to announce the results of the final nine drill holes from its Phase III drill program at the Copper Creek Project, located in Arizona ("Copper Creek"). Five holes were drilled in the American Eagle area, one at Old Reliable, two at the Sunrise Trend and one at Horsecamp. Paul Harbidge, President and CEO, commented, "These final drill results from the Phase III program have continued to expand the near-surface mineralization in the American Eagle area, including at the recently discovered Winchester breccia. We have now commenced work on an updated Mineral Resource Estimate, with an emphasis on expanding the open pit inventory. This work will support an updated Preliminary Economic Assessment with the goal of significantly enhancing the project economics." "We continue to see excellent exploration results at the project. Surface sampling and a reconnaissance drill hole at the Sunrise Trend have highlighted the potential for a new porphyry system. Across the property there are multiple untested breccias, which crop out at surface and we are excited to continue to unlock value with our next phase of drilling." Highlights (For true width information see Table 1) Phase III Drill Program - Summary Phase III drilling commenced in October 2023 and concluded in mid-April 2025. With this news release, all 79 drill hole assays have been reported. For drill holes not reported herein, refer to news releases on the Company's website and SEDAR+ profile at www.sedarplus.ca . Next Steps The Company has completed nearly 40,000 metres of incremental drilling beyond the current MRE 2 , which represents a significant opportunity to enhance the project value by increasing the open pit mineral resource. The Company anticipates the release of an updated MRE and Preliminary Economic Assessment ("PEA") near the end of the third quarter of 2025. Drill Hole Summary The American Eagle area , as mapped on surface, covers approximately 800 m by 1,000 m and is host to numerous prospective breccias and porphyries which have strong copper geochemical signatures (Figures 1 and 2). These surface expressions locate above the large underground porphyry mineral resource 1 , which is approximately 500 m to 1,100 m depth below surface. Historically, the near-surface mineralization was not adequately tested as previous drilling was vertical to steeply inclined. Mapped geology, isolated historical drill intercepts and historical small-scale mining highlight the potential for near-surface mineralization. This, together with assay results from Phase III drilling, provides a broad framework of the geology, structure, and alteration and confirms the potential for significant near-surface copper mineralization. The Sunrise Trend hosts the historical Bunker Hill mine, which is located 1.2 km south of American Eagle and 1 km west of Area 51 (Figure 1). The mine exploited a polymetallic lead-zinc-silver-copper vein in the early 20 th century. Airborne short-wave infrared spectral data, together with a strong Induced Polarization ("IP") geophysical anomaly, geological mapping and rock chip sampling, highlight the exploration potential of the area. The data suggest the historically mined vein is related to a porphyry centre separate from the American Eagle and Mammoth - Keel systems at Copper Creek. Modern exploration and drilling are limited in the area. Two reconnaissance holes were drilled to guide further exploration. Old Reliable is a historical mine, approximately 700 m west of Mammoth, where high-grade breccia-hosted mineralization was mined via surface blasting. Geophysical data highlight a zone of low resistivity extending westward at depth from Keel to below Old Reliable. The Horsecamp area is part of the Western Breccia Trend and is located approximately 1 km to 1.5 km southwest of the Rum area (Figure 1). The trend extends over 5 km in a northwesterly orientation approximately 1 km to 2 km west of the resource area. It includes over 50 breccias intruding Glory Hole volcanics and granodiorite. Historical and current drilling along the trend is limited. The alteration and sulphide assemblages, together with geologic relationships suggest that shallow parts of these breccias are preserved, and copper mineralization may be present at depth. In the Horsecamp area several hydrothermal breccias and a vein zone with copper mineralization potential at depth crop out and are visible at surface. Figure 1: Plan View Showing Surface Geology and Location of the Drill Holes Note: The open pit shells are based on constraints used in the MRE as presented in the Copper Creek Technical Report 2 . Figure 2: Isometric View Showing Phase III Drill Holes in the American Eagle Area Note: The open pit shell and underground footprint are based on constraints used in the MRE as presented in the Copper Creek Technical Report 2 . For drill holes not reported herein, refer to news releases on the Company's website at www.faradaycopper.com and on the Company's SEDAR+ profile at www.sedarplus.ca . Table 1: Selected Drill Results Note: All intercepts are reported as downhole drill widths. Mineralization includes bulk porphyry style and breccia mineralization. True widths are approximate due to the irregular shape of mineralized domains. N/A: Not analyzed. Table 2: Collar Locations from the Drill Holes Reported Herein Note: Coordinates are given as World Geodetic System 84, Universal Transverse Mercator Zone 12 north (WGS84, UTM12N). Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance All sampling was conducted under the supervision of the Company's geologists and the chain of custody from Copper Creek to the independent sample preparation facility, ALS Laboratories in Tucson, AZ, was continuously monitored. The samples were taken as ½ core, over 2 m core length. Samples were crushed, pulverized and sample pulps were analyzed using industry standard analytical methods including a 4-Acid ICP-MS multielement package and an ICP-AES method for high-grade copper samples. Gold was analyzed on a 30 g aliquot by fire assay with an ICP-AES finish. A certified reference sample was inserted every 20 th sample. Coarse and fine blanks were inserted every 20 th sample. Approximately 5% of the core samples were cut into ¼ core and submitted as field duplicates. On top of internal QA-QC protocol, additional blanks, reference materials and duplicates were inserted by the analytical laboratory according to their procedure. Data verification of the analytical results included a statistical analysis of the standards and blanks that must pass certain parameters for acceptance to ensure accurate and verifiable results. Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Faraday's VP Exploration, Dr. Thomas Bissig, P. Geo., who is a Qualified Person under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101"). Notes 1 Copper cutoff grade is as presented in the MRE 2 . 2 The Mineral Resource Estimate is presented in the report titled "Copper Creek Project NI 43-101 Technical Report and Preliminary Economic Assessment" with an effective date of May 3, 2023, available on the Company's website at www.faradaycopper.com and on the Company's SEDAR+ profile at www.sedarplus.ca . About Faraday Copper Faraday Copper is an exploration company focused on advancing its flagship copper project in Arizona, U.S. The Copper Creek Project is one of the largest undeveloped copper projects in North America with significant district scale exploration potential. The Company is well-funded to deliver on its key milestones and benefits from a management team and board of directors with senior mining company experience and expertise. Faraday trades on the TSX under the symbol "FDY". For additional information please contact: Stacey Pavlova, CFA Vice President, Investor Relations & Communications Faraday Copper Corp. E-mail: [email protected] Website: www.faradaycopper.com To receive news releases by e-mail, please register using the Faraday website at www.faradaycopper.com . Cautionary Note on Forward Looking Statements Some of the statements in this news release, other than statements of historical fact, are "forward-looking statements" and are based on the opinions and estimates of management as of the date such statements are made and are necessarily based on estimates and assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual results, level of activity, performance or achievements of Faraday to be materially different from those expressed or implied by such forward-looking statements. Such forward-looking statements and forward-looking information specifically include, but are not limited to, statements concerning the exploration potential of the Copper Creek property and the timing of the MRE and PEA. Although Faraday believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of future performance and actual results or developments may differ materially. Accordingly, readers should not place undue reliance on forward-looking statements or information. Factors that could cause actual results to differ materially from those in forward-looking statements include without limitation: market prices for metals; the conclusions of detailed feasibility and technical analyses; lower than expected grades and quantities of mineral resources; receipt of regulatory approval; receipt of shareholder approval; mining rates and recovery rates; significant capital requirements; price volatility in the spot and forward markets for commodities; fluctuations in rates of exchange; taxation; controls, regulations and political or economic developments in the countries in which Faraday does or may carry on business; the speculative nature of mineral exploration and development, competition; loss of key employees; rising costs of labour, supplies, fuel and equipment; actual results of current exploration or reclamation activities; accidents; labour disputes; defective title to mineral claims or property or contests over claims to mineral properties; unexpected delays and costs inherent to consulting and accommodating rights of Indigenous peoples and other groups; risks, uncertainties and unanticipated delays associated with obtaining and maintaining necessary licenses, permits and authorizations and complying with permitting requirements, including those associated with the Copper Creek property; and uncertainties with respect to any future acquisitions by Faraday. In addition, there are risks and hazards associated with the business of mineral exploration, development and mining, including environmental events and hazards, industrial accidents, unusual or unexpected formations, pressures, cave-ins, flooding and the risk of inadequate insurance or inability to obtain insurance to cover these risks as well as "Risk Factors" included in Faraday's disclosure documents filed on and available at www.sedarplus.ca . This press release does not constitute an offer to sell or a solicitation of an offer to buy any securities in any jurisdiction to any person to whom it is unlawful to make such an offer or solicitation in such jurisdiction. This press release is not, and under no circumstances is to be construed as, a prospectus, an offering memorandum, an advertisement or a public offering of securities in Faraday in Canada, the United States or any other jurisdiction. No securities commission or similar authority in Canada or in the United States has reviewed or in any way passed upon this press release, and any representation to the contrary is an offence. SOURCE: Faraday Copper Corp. View the original press release on ACCESS Newswire

View stock analysis, news, and events for Faraday Copper Corp