Compagnie De Saint-gobain Sa · EURONEXT:SGO
Compagnie De Saint-gobain Sa — Saint-Gobain — Technical Presentation (March 2015)
11 slides from Compagnie De Saint-gobain Sa's technical presentation, Mar 30, 2015
Slide 1: Patrice Fournier, March 30th, 2015
Patrice FOURNIER March 30th, 2015
Slide 2: Wear resistant coatings inside pipes, tubes, sleeves
Saint-Gobain provides a diverse mix of innovative products and technical solutions to withstand applications with abrasion, erosion, sliding wear, with or without corrosion or oxidation environment, at ambient or high temperature, with thermal cycles. Wear resistant coatings inside pipes, tubes, sle
Slide 3: Targets: markets & application
Targets : markets & application Tar sands : pipes and components subject to tar sands abrasion (NW Canada, Columbia, Venezuela, Angola, Russia, Congo, Uganda) Oil & Gas exploration : mud pumps, pipes, desander components, off-shore risers Coal-fired power plants : pipes eroded by abrasive coal dust
Slide 4: What's ID GUN?
What’s ID GUN ? is a thermal spray coating technology
Slide 5: Technical benefits
Technical benefits f {fi I‘ enths NQay!
Slide 6: Technical benefits
Technical benefits Wider range of coatings: ceramic, metal, carbide, metal-carbide Coatings can be applied onto non-weld-able alloys Coatings are crack free, large porosity free Low substrate temperature during coating <200°C (<392°F) No part distortion versus welding, nor metallurgic structure chan
Slide 7: Low cost versus high performances
Low cost versus high performances Capex is up to 70% cheaper versus competitive thermal spray solutions Eenergy cost is up to 70% lower versus HVOF High coating rates, excellent deposit efficiency achieving considerable savings Long life of the nozzles ensures lower operating cost, utilizes standard
Slide 8: Key coatings portfolio
Key coatings portfolio Ti-Elite, Ti-Tex - Friction wear resistant - hardness ~ 1000Hv200, medium corrosion resistance - low friction coefficient. COREC 6 - Friction and fretting wear resistant coatings – hardness 39–44 HRC, oxidation & corrosion resistant in phosphoric and acetic acid AZ SUPRA - ran
Slide 9: Advanced thermal sprayed coatings
Advanced thermal sprayed coatings Up-to 68% deposit efficiency with tungsten carbide, with very low content of residual dust while coating inside the pipe. Low porosity, hard, high cohesion coatings, with almost no un-molten particles providing higher abrasion & erosion wear resistance. Low stress c
Slide 10: A robust and durable design
A robust and durable design Built for production, rugged construction, resists to the heat. Remains very clean during spraying: low risk of coating pollution, low maintenance. BOOST CLEAN air cooling design to remove un-melted particles from the coating surface, to circulate the air inside the pipe
Slide 11: Equipment set-up
Equipment set-up Air and gas Feed rate control control panels Gas supplies ID gun