DuPont de Nemours, Inc. · NYSE:DD
DuPont de Nemours — DuPont — EIPC Winter Conference 2006
26 slides from DuPont de Nemours's conference presentation, Jan 26, 2006
Slide 1: Get Wet and Improve Your Innerlayer Yields
GET WET AND IMPROVE YOUR INNERLAYER YIELDS EIPC WINTER CONFERENCE BUDAPEST, HUNGARY January 26, 2006 William L. Wilson
Slide 2: History of Wet Lamination
2 HISTORY OF WET LAMINATION DuPont introduced wet lamination with dry film photoresists in 1984 using a “flood” approach. Original system was plagued by leaks, resist wrinkles and inconsistent performance. Other suppliers offered similar designs later. 1/25/2006 DUPONT CONFIDENTIAL
Slide 3: History of Wet Lamination
3 HISTORY OF WET LAMINATION DuPont redesigned and re-introduced wet-lam in Year 2000. The new DuPont YieldMaster 2000 System provides greatly improved reliability and reduced water usage. Over 200 Systems are currently operating in Asia and the Americas. 1/25/2006 DUPONT CONFIDENTIAL
Slide 4: How Wet Lamination Works
4 HOW WET LAMINATION WORKS The dry film photoresist used must be specifically formulated to be hydrophilic and absorb water. Water absorption softens the resist and permits it to flow fully into most surface features. The result is significantly improved resist adhesion and conformation. 1/25/2006 D
Slide 5: Humidity vs. Resist Viscosity
5 HUMIDITY vs. RESIST VISCOSITY 180 B Film A 160 B Poise J Film B 140 6 Film Viscosity @ 40 C, x 10 120 100 B 80 60 J 40 J 20 B 0 J 0 10 20 30 40 50 60 70 80 90 Relative Humidity, % 1/25/2006 DUPONT CONFIDENTIAL
Slide 6: Wet-Lam Applications
6 WET-LAM APPLICATIONS Innerlayers with reverse-treated and smooth copper foils. Flexible layers with ED & RA Cu. Sub and via layers. Photochemical machining metals. 1/25/2006 DUPONT CONFIDENTIAL
Slide 7: Wet-Lam Resist Conformation
7 WET-LAM RESIST CONFORMATION 1/25/2006 DUPONT CONFIDENTIAL
Slide 8: Wet Lamination Limits
8 WET LAMINATION LIMITS 1/25/2006 DUPONT CONFIDENTIAL
Slide 9: Interfacial Voids
9 INTERFACIAL VOIDS Moderate Interfacial Void Moderate Interfacial Voids Weave Weave 75 - 125 25 µm µm Coarse Interfacial Voids Fine Interfacial Void Weave Weave 200 µm 12 µm 1/25/2006 DUPONT CONFIDENTIAL
Slide 10: Multilayer Flexible Circuit Hot Roll Wet-Laminated
10 MULTILAYER FLEXIBLE CIRCUIT HOT ROLL WET-LAMINATED 1/25/2006 DUPONT CONFIDENTIAL
Slide 11: Chem-Milling Edge Quality
11 CHEM-MILLING EDGE QUALITY 1/25/2006 DUPONT CONFIDENTIAL
Slide 12: New Wet-Lam Applications
12 NEW WET-LAM APPLICATIONS Flexible/Rigid Panels HDI Outerlayers 1/25/2006 DUPONT CONFIDENTIAL
Slide 13: Wet Lamination Limits
13 WET LAMINATION LIMITS Wet-lam cannot be used with pattern-plated outerlayers. Water in plated-through holes (PTHs) pulls in resist leaving a ring of residue. The result can be PTH voids. 1/25/2006 DUPONT CONFIDENTIAL
Slide 14: Why Wet Lamination?
14 WHY WET LAMINATION? Increase first-pass yields 2 to 5% points. Increase fine (<75 microns) signal layer yields up to 25%. Gain greater yield consistency; no defect spikes due to product mix variation. 1/25/2006 DUPONT CONFIDENTIAL
Slide 15: YieldMaster Results
15 YIELDMASTER RESULTS 8.00% 7.00% 6.00% YieldMaster™ Installation open Yield Loss 5.00% rp open nick 4.00% rp nick 3.00% short 2.00% hand 1.00% 0.00% l ay n r ct g p Ju Ap Ju Au Se O M * First Pass Yield data from large volume production in the US 1/25/2006 DUPONT CONFIDENTIAL
Slide 16: Why Wet Lamination?
16 WHY WET LAMINATION? Increase CSL speed from 200-250 cm/min to 300 cm/min. Eliminate pre-heating equipment and cleaning machines. Reduce resist thickness for improved etched aspect ratio. 1/25/2006 DUPONT CONFIDENTIAL
Slide 17: Improved Fine-Line Aspect Ratio
17 IMPROVED FINE-LINE ASPECT RATIO 5 Conductor Width Cpk 4 3 2 1 50µm 0 75µm -1 100µm YieldMaster® Supplier 2 Supplier 3 Supplier 4 125µm Data analyzed by Conductor Analysis Technology Inc. Test data from evaluation at major PWB-manufacturer 1/25/2006 DUPONT CONFIDENTIAL
Slide 18: Cut-Sheet Laminator YieldMaster 2000 System
18 CUT-SHEET LAMINATOR YIELDMASTER 2000 SYSTEM 1/25/2006 DUPONT CONFIDENTIAL
Slide 19: CSL YieldMaster 2000
19 CSL YIELDMASTER 2000 1/25/2006 DUPONT CONFIDENTIAL
Slide 20: PVA Wet Roll Sleeves
20 PVA WET ROLL SLEEVES 1/25/2006 DUPONT CONFIDENTIAL
Slide 21: DuPont YieldMaster 2000 Control System
21 DUPONT YIELDMASTER 2000 CONTROL SYSTEM 1/25/2006 DUPONT CONFIDENTIAL
Slide 22: DuPont HRL YieldMaster 2000
22 DUPONT HRL YIELDMASTER 2000 1/25/2006 DUPONT CONFIDENTIAL
Slide 23: Wet-Lam Summary
23 WET-LAM SUMMARY Reduced manufacturing costs via increased yields and lamination productivity. Improved resist conformation to surface topography and imperfections. Increased resist adhesion to survive long and multi-pass etch cycles. Reduced mechanical handling damage. 1/25/2006 DUPONT CONFIDENTI
Slide 24: Get Wet
GET WET The miracles of science~
Slide 25: Trademark and extended confidentiality statements
Trademark and extended confidentiality statements can go here. Ed eu faccum vel utpat uis nim zzriurer sectetue tatie minit, consequ ismod ipsusto essed eriusciduip et, si tinibh etumsan utat ut dolobor irit dol ore. Duisi blan vel eum velismolore vent dolore dolorting et nim. Rat. Dit wis el ulla f
Slide 26: The miracles of science
The miracles of science”