Ptt Public Co., Ltd. · SET:PTT
Ptt Public — ESG Presentation (September 2017)
44 slides from Ptt Public's sustainability presentation, September 2017
Slide 1: Petroleum and Earth Resources Technology
Petroleum and Earth Resources Technology
Slide 2: LEED certification levels and points
LEED Platinum 80 – 110 points LEED Gold 60 – 79 points LEED Silver 50 – 59 points LEED Certified 40 - 49 points
Slide 3: LEED categories, purpose and points possible
Category Purpose Points possible Sustainable Sites Reduce environmental damage 1 prerequisite by encouraging more sustainable means of transport 26 possible points Water Efficiency Encourage more efficient use of water 1 prerequisite and waste treatment 10 possible point Energy and Atmosphere Optimi
Slide 4: Sustainable Site: Construction Activity Pollution Prevention
Sustainable Site SS prerequisite1: Construction Activity Pollution Prevention • Install perimeter fencing and stormwater drainage system with sediment capturing features. • Install Vehicle Lorry cleaning at site main entrance/exit. • Install site perimeter erosion prevention control measures. • Prov
Slide 5: Sustainable Site: Site Selection
Sustainable Site SS credit 1 : Site Selection
Slide 6: Sustainable Site: Development Density and Community Connectivity
Sustainable Site SS credit 2 : Development Density and Community Connectivity
Slide 7: Sustainable Site: Public Transport Access
Sustainable Site SS credit 4.1: Alternative Transportation- Public Transport Access
Slide 8: Sustainable Site: Bicycle Storage & Changing Rooms
Sustainable Site SS credit 4.2: Alternative Transportation, Bicycle Storage & Changing Rooms
Slide 9: Sustainable Site: Low-Emitting and Fuel-Efficient Vehicles
Sustainable Site SS credit 4.3: Alternative Transportation, Low-Emitting and Fuel-Efficient Vehicles
Slide 10: Sustainable Site: Parking Capacity
Sustainable Site SS credit 4.4: Alternative Transportation, Parking Capacity
Slide 11: Sustainable Site: Protect or Restore Habitat
Sustainable Site SS credit 5.2 : Site Development-Protect or Restore habitat
Slide 12: Sustainable Site: Maximize Open Space
Sustainable Site SS credit 5.2 : Site Development-Maximize Open Space
Slide 13: Sustainable Site: Storm Water Design Quality Control
Sustainable Site SS credit 6.2 : Strom water Design – Quality Control Management Practices for Removing Total Suspended Solids from Runoff
Slide 14: Sustainable Site: Heat Island Effect, Non-Roof
Sustainable Site SS credit 7.1: Heat Island Effect- Non-Roof
Slide 15: Sustainable Site: Heat Island Effect, Roof
Sustainable Site SS credit 7.2: Heat Island Effect, Roof • Install highly reflective roofing materials )(SRI78) for at least 75% of the total roof area • Highly reflective materials such as aluzinc and/or white painted colored roofing materials
Slide 16: Sustainable Site: Light Pollution Reduction
Sustainable Site SS credit 8: Light Pollution Reduction
Slide 17: Water Efficiency: Water Use Reduction
Water Efficiency WE prerequisite 1: Water Use Reduction
Slide 18: Water Efficiency: Water Efficient Landscaping
Water Efficiency WE credit 1: Water Efficient Landscaping
Slide 19: Water Efficiency: Innovative Wastewater Technologies
Water Efficiency WE credit 2: Innovative Wastewater Technologies
Slide 20: Water Efficiency: Water Use Reduction
Water Efficiency WE credit 3: Water Use Reduction
Slide 21: Energy & Atmosphere: Fundamental Commissioning
Energy & Atmosphere EA prerequisite 1: Fundamental Commissioning of the Building Energy Systems The commissioning Agent Provide document : -OPR -BOD -Commissioning plan -Commissioning requirement -Report design review meeting -Report contractor submittals -Verifies installation and performance of sy
Slide 22: Energy & Atmosphere: Minimum Energy Performance
Energy & Atmosphere EA prerequisite 2: Minimum Energy Performance • Provide HVAC, Interior Lighting and Envelope better than as per ASHRAE 90.1 Appendix G requirements • Perform Energy Simulation/Modeling for the building HVAC, Lighting and Envelope designs • Exterior insulation shall be covered wit
Slide 23: Energy & Atmosphere: Fundamental Refrigerant Management
Energy & Atmosphere EA prerequisite 3: Fundamental Refrigerant Management • Provide Non-CFC based refrigerants for Fire protection, HVAC and Refrigeration equipment
Slide 24: Energy & Atmosphere: Optimize Energy Performance
Energy & Atmosphere EA credit 1: Optimize Energy Performance
Slide 25: Energy & Atmosphere: Measurement and Verification
Energy & Atmosphere EA credit 4: Measurement and Verification
Slide 26: Materials & Resources: Storage and Collection of Recyclables
Materials & Resources MR Prerequisite 1: Storage and Collection of Recyclables
Slide 27: Materials & Resources: Recycled Content
Materials & Resources MR credit 4: Recycled Content
Slide 28: Materials & Resources: Regional Materials
Materials & Resources MR credit 5: Regional Materials
Slide 29: Indoor Environmental Quality: Minimum IAQ Performance
Indoor Environmental Quality IEQ prerequisite 1: Minimum IAQ performance • Design ventilation as per ASHRAE 62.1 requirements 1 point for increase ventilation at least 30% above the minimum rates in ASHRAE 62.1-2007
Slide 30: Indoor Environmental Quality: Tobacco Smoke Control
Indoor Environmental Quality IEQ prerequisite 2: Environmental Tobacco Smoking (ETS) Control
Slide 31: Indoor Environmental Quality: Outdoor Air Delivery Monitoring
Indoor Environmental Quality IEQ credit 1: Outdoor Air Delivery Monitoring
Slide 32: Indoor Environmental Quality: Increase Ventilation
Indoor Environmental Quality IEQ credit 2: Increase Ventilation
Slide 33: IEQ: Construction IAQ Management Plan, During Construction
Indoor Environmental Quality IEQ credit 3.1: Construction IAQ Management Plan, During Construction • Develop IAQ Management plan according to SMACNA GUIDELINES. IAQ Management Plan
Slide 34: Duct protection and hazardous materials storage
• Enhanced duct protection to both sides • Protection to HVAC equipment Chemical/Inflammable/Hazardous Materials • Separate off site storage facility • Container of wet products, to be kept closed • Separate storage for hazardous materials
Slide 35: IEQ: Construction IAQ Management Plan, Before Occupancy
Indoor Environmental Quality IEQ credit 3.2: Construction IAQ Management Plan, Before Occupancy • System Flush-out
Slide 36: IEQ: Low-Emitting Adhesives & Sealants
Indoor Environmental Quality IEQ credit 4.1: Low-Emitting Materials, Adhesives & Sealants • Supply with Low VOC content as per GS requirements
Slide 37: IEQ: Low-Emitting Paints & Coatings
Indoor Environmental Quality IEQ credit 4.2: Low-Emitting Materials, Paints & Coatings • Supply with Low VOC content as per GS requirements
Slide 38: Product Type and VOC source table
Product Type’ Product Name / Model ‘Source of VOC Ot | ||| | oJ See ptt
Slide 39: IEQ: Controllability of Systems, Lighting
Indoor Environmental Quality IEQ credit 6.1: Controllability of System, Lighting
Slide 40: IEQ: Controllability of Systems, Thermal Comfort
Indoor Environmental Quality IEQ credit 6.2: Controllability of Systems, Thermal Comfort
Slide 41: IEQ: Thermal Comfort, Design
Indoor Environmental Quality IEQ credit 7.1: Thermal Comfort, Design
Slide 42: IEQ: Thermal Comfort, Verification
Indoor Environmental Quality IEQ credit 7.2: Thermal Comfort, Verification
Slide 43: IEQ: Daylight & Views, Views
Indoor Environmental Quality IEQ credit 8.2: Daylight & Views, Views
Slide 44: Innovation & Design Process
Innovation & Design Process ID credit : Innovation in Design
PTT Public Company — ESG Presentation (September 2017) on 6ix