Sulzer AG · SIX:SUN

Sulzer — Sulzer Pumps — Technical Presentation (March 2013)

14 slides from Sulzer's technical presentation, March 2013

  1. Slide 1: OHV / OHVL Type OH3 Vertical Inline Pumps

    OHV / OHVL Type OH3 Vertical Inline Pumps Sulzer Pumps ISO 13709 (API 610) The Heart of Your Process

  2. Slide 2: OHV / OHVL Type OH3 Vertical Inline Pumps

    OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) Sulzer Pumps OHV OHVL OHV/OHVL Sales Presentation<Copyright © Sulzer Pumps> | slide 2

  3. Slide 3: OHV Product Evolution

    OHV Type OH3 Vertical Inline Pump Product Evolution Sulzer Pumps In the 1970’s and 1980’s there were thousands of rigidly-coupled CVA pumps sold – especially for gas plants and small process plants. In the 1990’s the CVA8 evolved to utilize the newer hydraulics of the CAP8 and added the bearing hous

  4. Slide 4: OHV Design Features: Hydraulics

    OHV Design Features Hydraulics Sulzer Pumps „ Flows to 1,150 m3/h (5,000 USgpm); Heads to 250 m (820 ft) „ Enclosed impellers provided for increased efficiency. „ 34 different hydraulics with 11,000 Nss or less. „ Optional impellers in 13 larger sizes for lower NPSHr. „ Impeller is dynamically balan

  5. Slide 5: OHV Design Features: Volute Casing

    OHV Design Features Volute Casing Sulzer Pumps „ Per ISO 13709 (API 610) pressure boundary components are designed to accommodate stresses. „created by 52 Bar (740 psi) on smaller sizes, 41 Bar (600 psi) on larger sizes, „caused by 2 times API 610 nozzle loads „from spiral wound gasket compression „

  6. Slide 6: Inline Mounting

    Inline Mounting Sulzer Pumps „ More and more projects are being “modularized” in convenient locations „ Plant modules are then shipped to remote jobsite for faster installation with less skilled workforce. „ That greatly reduces remote site costs and speeds project startup. The OHV Pump: „ reduces f

  7. Slide 7: OHV / OHVL Design Features: Seal Chamber

    OHV / OHVL Design Features Seal Chamber Sulzer Pumps „ ISO-13709 (API 610) Table 6 seal chambers for improved seal life. „ All mechanical seals are cartridge type for ease of installation. „ ISO 21049 (API 682) single, dual, dual pressurized or gas secondary seals are available to meet all process r

  8. Slide 8: OHV / OHVL Design Features: Bearing Frame

    OHV / OHVL Design Features Bearing Frame Sulzer Pumps „ Bearing housing is finned carbon steel for maximum heat dissipation. „ 2 bearing housings and 3 shaft sizes cover the entire OHV product line for maximum interchangeability. „ All bearing housings are drilled and tapped for grease or oil mist l

  9. Slide 9: OHV / OHVL Design Features: Bearings and Lubrication

    OHV / OHVL Design Features Bearings and Lubrication Sulzer Pumps „ Bearings are interchangeable among OHH, OHHL, OHV and OHVL pumps. „ 7300 series thrust bearings are back to back, heavy duty 40 deg. angular contact with machined brass cages. „ 6200 series ball radial bearing has required C3 clearan

  10. Slide 10: OHV / OHVL Design Features: Couplings, Guards and Cooling

    OHV / OHVL Design Features Couplings, Guards and Cooling Sulzer Pumps „ The same Metastream TSCS, Thomas 71, Kopflex KD-2 non-lubricated couplings used on the OHH / OHHL can be supplied on the OHV or OHVL. „ The standard coupling guard meets ISO 13709 (API 610) and OSHA requirements. Other materials

  11. Slide 11: OHV / OHVL Design Features: Pump & Driver support stand

    OHV / OHVL Design Features Pump & Driver support stand Sulzer Pumps „ The OHV / OHVL pump and driver support stand is a heavy fabrication with continuous welds and gusseted for extra strength. „ FEA was used to analyze the stand to assure that pumps operate well away from any natural frequencies – p

  12. Slide 12: OHVL – low flow

    OHVL – low flow Sulzer Pumps „ The OHVL is the low flow version of the OHV. „ It utilizes the OHV bearing frame with an OHHL shaft to secure the OHHL low flow impeller. „ The casing cover and diffuser are also from the OHHL. „ The ISO 21049 (API 682) cartridge type mechanical seals fit OHH, OHV, OHH

  13. Slide 13: OHVL – low flow performance

    OHVL – low flow performance Sulzer Pumps „ The OHVL performance is identical to the OHHL. „ It will produce more than 400 m (1,300 ft) in a single stage. „ Flow ranges from 0.2 m3/h (1 USgpm) to about 50 m3/h (220 USgpm). „ NPSHr is excellent. „ Impeller standard clearance is a liberal 0.75 mm (0.03

  14. Slide 14: OHV / OHVL Investment in Manufacturing

    OHV / OHVL Investment in Manufacturing Sulzer Pumps In the past years, Sulzer Pumps has invested heavily in overhung pump manufacturing. Some examples: „ New multi axis SHW machining center in place (two shift operation). „ Relocation of other machining centers to this factory to further enhance eff

Sulzer Pumps — Technical Presentation (March 2013) on 6ix