Optomed Oyj Class A · OMXHEX:OPTOMED

Optomed Oyj Class A — Technical Presentation (2021)

16 slides from Optomed Oyj Class A's technical presentation, 2021

  1. Slide 1: Optomed Polaris Training Deck

    Optomed Polaris Training Deck

  2. Slide 2: Contents

    Contents o Setup • Connections • PACS • Auto-export o Usage • General • Patient data • Capturing  Retina  Cornea • Review  Patient data layout  Image handling options  Integrated viewer

  3. Slide 3: Setup – Connections

    Setup o Connections * The Polaris camera can be connected to a LAN-network with the Ethernet connector in the bottom of the camera. ~* + Also USB mass storage and HDMI connectors can be found in f ’ N the bottom : = OPT@MED

  4. Slide 4: Setup – DICOM

    Setup o DICOM • PACS and Worklist connections can be established by filling out the information in DICOM SETTING in Settings. - In case DICOM is not found in Settings it can be enabled by installing a DICOM patch (available from Optomed) Note : Images only appear in PACS after they are sent to DICOM

  5. Slide 5: Setup – Exporting data to another PC

    Setup o Exporting data to a another PC • In addition to saving the studies in PACS it is also possible to auto-export all images to a network location using the cameras ethernet connection • This can be done by for example mapping a network drive from the built in Windows tablet of Polaris and then

  6. Slide 6: Usage – General

    Usage - General o Camera Start-up + The camera can be started from the I/O switch * After the system has powered the Polaris program will open automatically o Shutting down * The camera can be shut down from the I/O switch Note: Do not close the Polaris program before shutting down OPT@MED

  7. Slide 7: Usage – Patient Data

    Usage – Patient Data o Patient data can be filled in the section of UI shown below. • Alternatively data can be selected from existing list of patient studies o To input data select either Manual input or DICOM worklist (Icon is shown if connection is configured) o Note: ID is a required field

  8. Slide 8: Usage – Patient Data

    Usage – Patient Data o Patient data is stored in the local database of the camera (even if ¨ PACS connection is used) 1 o Removal • Individual Patient data can be removed by clicking on the Patient data and selecting Remove (1) • The whole database in the camera can be erased by using a separate ser

  9. Slide 9: Usage – Capturing (Retina)

    Usage – Capturing Retina o Preparations • Remove the lens cap • Clean the chin- and forehead rests • Ask the patient to position their head in the chin rest o Retinal imaging Operation modes • The camera can operate in either - Semi-Auto mode which captures only the selected eye - Full-Auto mode whi

  10. Slide 10: Capturing – Retina, semi-auto mode

    Usage – Capturing Retina, semi-auto mode 1. First select CAPTURE section from UI 2. Select eye side – and fixation target (if needed) Right eye 3. Adjust chin rest height 4. Click center of the pupil 5. Start capture Macula Disc centered centered 3. 2. 4. Left eye 1. Macula Disc centered centered

  11. Slide 11: Capturing – Retina, full-auto mode

    Usage – Capturing Retina, Full-auto mode • Macula centered images of both eyes Right eye • Full-auto mode will automatically capture macula centered images of both eyes with default setting by just adjusting the chin rest height, centering the pupil by clicking on screen and pressing “Capture” Macul

  12. Slide 12: Capturing – Cornea

    Usage – Capturing Cornea o Cornea mode can be enabled by clicking the Retina / Cornea icon o Select eye side, adjust chin rest, click center of pupil and Capture

  13. Slide 13: Usage – Image review

    Usage – Image review o Go to REVIEW section of UI o Select patient and Visit Date from list to access image directory

  14. Slide 14: Usage – Image review

    Usage – Image review o Long press on each image will open handling options (send to DICOM, Mosaic, Print, Side by side comparison, Export to local folder, Delete) • Note : Images only appear in PACS after they are sent to DICOM in REVIEW section

  15. Slide 15: Usage – Image review

    Usage – Image review o Click on each image will open the viewer with the following features • Pinch zoom • Contrast adjustment • Brightness adjustment • Negative • Digital Red free • Color channel split • Cup-to-disc ratio measurement • Export • Undo

  16. Slide 16: Optomed Plc. contact details

    Optomed is a Valued Supplier on the IAPB Standard List Optomed Plc. Yrttipellontie 1, 90230 Oulu, Finland Tel: +358 20 741 3380 • Info@optomed.com www.optomed.com

Optomed — Technical Presentation (2021) on 6ix