Slide 1: Customer Webinar
Customer Webinar 20200728 CTS SERVICE OPERATION Muhammad Iqbal
Slide 2: Muhammad Iqbal
Muhammad Iqbal Technical Support Oil Injection Screw Compressors
Slide 3: Compressor installation Do's and Don'ts
“Compressor installation Do’s and Don’ts” Tips and trick on your compressor installation
Slide 4: Webinar Topic and agenda of Compressor installation Do's and Don'ts
Webinar Topic and agenda of “Compressor installation Do’s and Don’ts” ▪ Tips and trick of compressors installation ▪ Free discussion – Q/A 4
Slide 5: Tips and Trick on our compressors installations
Tips and Trick on our compressors installations ▪ Proper ventilation ▪ Dust prevention ▪ Free space around the compressors ▪ Sufficient height for service activities ▪ Foresee lifting capabilities ▪ Easy access to the compressor room ▪ Clean floor space ▪ Always follow installation recommendations 5
Slide 6: Proper ventilation
Proper ventilation Do . . . . . . • To prevent overheating, good room ventilation is really important • Foresee enough openings of the right dimensions 30℃－ 40℃－ 50℃↑ Don’ts . . . . . • Compressors and air dryer must not be installed in a room without ventilation • the heat emitted by the compressor
Slide 7: Installation requirements for the compressor room ventilation system
Installation requirements for the compressor room ventilation system Installation diagram of compressor intake and exhaust system In order that the heat can be discharged in time during the compressor production process, the equipment must meet the related ventilation installation requirements in th
Slide 8: Installation requirements for the compressor room ventilation system
Installation requirements for the compressor room ventilation system Compressor intake and exhaust system installation precautions The compressors are equipped with independent exhaust ducts to direct the heat generated outside.
Slide 9: Dust prevention
Dust prevention Do . . . . . . • Keep dust away ! • If necessary add extra dust filters or filter math to the ventilation • Install ducts to supply clean and fresh air and / or remove the heat Don’ts . . . . . • Extended service preventive maintenance • Cleaning air filter and reused
Slide 10: Compressor room environment selection
Compressor room environment selection Dusty industries: cement, foundry, ceramics, cement mixing, field Risks from dusty environments construction, electrolytic aluminum, Filter Main motor polysilicon, steel, mining, etc. In places with a dusty environment, it is recommended to modify the compressor
Slide 11: Compressor pre-filtration installation requirements
Compressor pre-filtration installation requirements It is generally not recommended to install a pre-filter screen on the compressor air inlet. If you need to install a pre-filter screen, its surface area must be large enough and it should The pre-filtration surface area be cleaned in time. should b
Slide 12: Free space around the compressors
Free space around the compressors Do . . . . . . • Space is precious also in a compressor room • But sometimes a lack space can get in the way • Of good maintenance of your compressor. Don’ts . . . . . • Install compressor with very limited and closes spaces • Free access also needed
Slide 13: Compressor installation - Sufficient space
Compressor installation - Sufficient space
Slide 14: Easy access to the compressor room
Easy access to the compressor room Do . . . . . . • Space is precious also in a compressor room • But sometimes a lack space can get in the way • Of good maintenance of your compressor. Don’ts . . . . . • Extended service preventive maintenance
Slide 15: Sufficient height for service activity
Sufficient height for service activity Do . . . . . . • Too little overhead room can cause overheating • Some components need to be accessible from the top Don’ts . . . . . • Put some parts or component on top side of compressors • Do other activity on top side of compressor beside of compressors ma
Slide 16: Foresee for lifting capability
Foresee for lifting capability Do . . . . . . • Too little overhead room can cause overheating • Some components need to be accessible from the top Don’ts . . . . . • Perform lifting activity without proper tools
Slide 17: Compressor room environment selection
Compressor room environment selection The compressor room should be equipped with lifting equipment. The lift table weight of the Please read the operating instructions lifting equipment must be and the precautions posted on the greater than the weight of the machine before moving and lifting the co
Slide 18: Clean and flat floor space
Clean and flat floor space Do . . . . . . • Always keep clean floor space of compressor area • Always keep flat floor and base • Don’ts . . . . . • Dirt and oil spillage at compressor area will be dangerous • Water condensate spillage also will be dangerous
Slide 19: Compressor Condensate pipe connection requirements
CompressorCondensate pipe connection requirements drain for easy monitoring Do.. Don’ts.. The manual and automatic drainage pipes of the The condensate drain pipes cannot be merged compressor should independently lead to the drainage into a main pipe. The above installation makes it ditch so that wh
Slide 20: Always follow installation recommendations
Always follow installation recommendations Safety ….. Do . . . . . . • Be safe , hoses or cables can cause tripping • Drains need to be installed correctly so the water can get away • Always follow tolerances and recommendations when connecting the equipment • If you meet any doubt , Atlas Copco can
Slide 21: Committed to Sustainable Productivity
COMMITTED TO SUSTAINABLE PRODUCTIVITY