Horiba, Ltd. · TSE:6856

Horiba — Technical Presentation (April 2020)

32 slides from Horiba's technical presentation, Apr 22, 2020

  1. Slide 1: © 2020 HORIBA, Ltd. All rights reserved.

    © 2020 HORIBA, Ltd. All rights reserved. 1

  2. Slide 2: Modern Particle Characterization Techniques: Introduction

    Instruments Incorporated Irvine, California Dr. Michael C. Pohl Modern Particle Characterization Techniques Introduction April 22, 2020 © 2020 HORIBA, Ltd. All rights reserved. 2

  3. Slide 3: Why Characterize Particles?

    Why Characterize Particles? Particle physical properties material behavior and processing across a number of industries Industry Industry Ceramic Construction Oil/rubber Chemical Battery Pharmaceutical Electricity Food/Drink Automobile Paper/Pulp Mining Ink/Toner © 2020 HORIBA, Ltd. All rights reser

  4. Slide 4: How will the data be used?

    How will the data be used? Physical Property (Scratching Power) (Rate of Surface Removal) (Rate of Dissolution) (Rate of Aggregation) (Dispersion Stability) (Hiding Power) Particle Size Parameter (𝐷50 Value) (% > 1.0 μm) (% > 0.5 μm) (Overall Distribution) © 2020 HORIBA, Ltd. All rights reserved. 4

  5. Slide 5: Particle Characterization Methods

    Particle Characterization Methods Particle Sizing Particle Counting Surface Area Porosimetry Zeta Potential Particle Shape Many More © 2020 HORIBA, Ltd. All rights reserved. 5

  6. Slide 6: Particle Sizing Techniques

    Particle Sizing Techniques Sedimentation Coulter Counter Laser Light Scattering Dynamic Light Scattering Image Analysis Nano Particle Tracking Many More © 2020 HORIBA, Ltd. All rights reserved. 6

  7. Slide 7: Size Range by Technique

    Size Range by Technique (µm) 0.001 0.01 0.1 1 10 100 1000 Sizes Nano-Metric Fine Coarse Colloidal Macromolecules Apps Suspensions and Slurries Powders Electron Microscope Acoustic Spectroscopy Sieves Light Obscuration Methods Laser Diffraction / LA-960 Electrozone Sensing DLS / SZ-100 Sedimentation

  8. Slide 8: Electrical Zone Sensing

    Electrical Zone Sensing • Coulter Principle – Based on change in conductivity of aperture as particle traverses. – Requires conducting liquid. – Directly measures particle volume and counts. – High resolution – Used for blood cell counting more than industrial applications © 2020 HORIBA, Ltd. All ri

  9. Slide 9: Sedimentation

    Sedimentation • Stokes Law Sedimentation of same density material in a viscous medium 18V p D    g p l Vp = Settling velocity of discrete particle g = Gravity constant ρp = Density of Particle Time ρl = Density of Carrier Fluid µ = Viscosity of Carrier Fluid Note: assumes settling of spherica

  10. Slide 10: Laser diffraction

    Laser diffraction Silica ~ 30 nm Laser Diffraction •Particle size 0.01 – 3000 µm •Converts angular variations in scattered light to particle size distribution •Quick, repeatable •Most common technique •Suspensions & powders © 2020 HORIBA, Ltd. All rights reserved. 10

  11. Slide 11: Automated Microscopy

    Automated Microscopy Static: Dynamic: Particles fixed on slide, Particles flow past camera(s) stage moves slide © 2020 HORIBA, Ltd. All rights reserved. 11

  12. Slide 12: DLS – Dynamic Light Scattering

    DLS – Dynamic Light Scattering •Particle size < 1 nm – 8 µm •Converts intensity variations in scattered light to particle size distribution •Quick, repeatable •Suspensions Z-average Diameter, nm Run 1 50.5 Nanogold ~ 50 nm Run 2 51.1 Run 3 49.2 Run 4 51.5 Run 5 49.7 Run 6 50.9 Avg. 50.5 Std. 0.9 Dev

  13. Slide 13: Sedimentation Particle Sizing Approaches

    Sedimentation Particle Sizing Approaches Homogeneous Line Start X-ray Irradiation Light Irradiation Cell Moves Source Moves Gravity Sedimentation Centrifugal Sedimentation Many More © 2020 HORIBA, Ltd. All rights reserved. 13

  14. Slide 14: BET Surface Area

    BET Surface Area Amount Adsorbed Large surface area 0 0.30 p/p0 Relative Pressure Small surface area © 2020 HORIBA, Ltd. All rights reserved. 14

  15. Slide 15: Particle Analysis Workflow

    Particle Analysis Workflow From: NIST Recommended Practice Guide Special Publication 960-1 Particle Size Characterization Ajit Jillavenkatesa Stanley J. Dapkunas Lin-Sien H. Lum Materials Science and Engineering Laboratory January 2001 © 2020 HORIBA, Ltd. All rights reserved. 15

  16. Slide 16: All analytical determinations start with sampling

    All analytical determinations start with sampling (PCA is no exception) • A representative sample is the key to drawing any scientific conclusion • This process is seemingly easy, but really complicated • It is a science of its own so needs some discussion • It is especially important for broad size

  17. Slide 17: Reliability of selected sampling methods using a 60:40 sand mixture

    Reliability of selected sampling methods using a 60:40 sand mixture Sampling Technique Standard Deviation Cone and Quartering 6.81 Scoop Sampling 5.14 Table Sampling 2.09 Chute Slitting 1.01 Spinning Riffling 0.146 Random Variation 0.075 Allen, T. (1997). Particle Size Measurement Volume 1: Powder S

  18. Slide 18: Sampling from Drums

    Sampling from Drums www.samplingsystems.com © 2020 HORIBA, Ltd. All rights reserved. 18

  19. Slide 19: Technique: Chute Riffling

    Technique: Chute Riffling Chute splitting allows sample to vibrate down a chute to vanes which separate the mass into two portions. Each portion moves further where they each are divided into two parts, now giving four parts. This is often continued until 8 or 16 portions are obtained. © 2020 HORIBA

  20. Slide 20: Sample Dividers

    Sample Dividers © 2020 HORIBA, Ltd. All rights reserved. 20

  21. Slide 21: Technique: Sampling from Beaker

    Technique: Sampling from Beaker • Liquid should be in motion vertically and horizontally to ensure good mixing. • Pipette should be about one-third of the way from the bottom when extracting sample. • Alternative: When mixing powders into a slurry: make paste, pipette from paste IMPELLER PIPETTE © 2

  22. Slide 22: Preparation of a Corundum Particle Size Reference Material

    Preparation of a Corundum Particle Size Reference Material Reference: Joint Research Centre (2018) Certification Report – The Certification of Particle Size distribution of Corundum: ERM-FD069, Luxembourg: Publications office of the European Union © 2020 HORIBA, Ltd. All rights reserved. 22

  23. Slide 23: Now you have a sample what comes next? (Sample Preparation)

    Now you have a sample what comes next? (Sample Preparation) • Most typical method is to match the process which produced the sample • High Energy or low energy • How are others in your industry doing the analysis? • This can be a huge time saver • Who will possibly be viewing my data? • Standard pre

  24. Slide 24: Sample Preparation tools at your disposal

    Sample Preparation tools at your disposal • All sorts of dispersing media • Organics and Inorganics • All sorts of dispersants and surfactants • McCutcheon’s Directory has loads of them • All sorts of mixing devices • Magnetic Mixers all the way to Waring Blenders • All sorts of ultrasonic devices •

  25. Slide 25: General Dispersion Procedures

    General Dispersion Procedures Reference: ASTM International (2016) Standard Guide for Liquid dispersion of Metal Powders and Related Compounds for Particle Size Analysis, Designation: B821 – 10, Page 2. © 2020 HORIBA, Ltd. All rights reserved. 25

  26. Slide 26: Recommended Dispersion Procedures

    Recommended Dispersion Procedures Reference: Joint Research Centre (2018) Certification Report – The Certification of Particle Size distribution of Corundum: © 2020 HORIBA, Ltd. All rights reserved. ERM-FD069, Luxembourg: Publications office of the European Union 26

  27. Slide 27: Most Common Statistics

    Most Common Statistics half are smaller than this diameter half are larger than this diameter D(v,0.5) median 10% of the particles lie 90% of the particles lie below this diameter below this diameter D(v,0.1) D(v,0.9) D(v,1.0) Never use the D100! Size µm D(4,3) sensitive to large particles D(3,2) se

  28. Slide 28: What conclusion can be reached from the data

    What conclusion can be reached from the data • The distribution became larger or smaller • Some aspect of the distribution has changed • The particle distribution got broader or narrower • The two modes can be analyzed separately • There are too many coarse particles in the sample • The two sets are

  29. Slide 29: Which Analyzer?

    Which Analyzer? Size, desired resolution, and budget determine technology and product. For a given problem the choice is often clear. ViewSizer 3000 PSA-300 Size AND shape Eyecon2 LA-960 LA-350 SZ-100 © 2020 HORIBA, Ltd. All rights reserved. 29

  30. Slide 30: Want to know more about this particle series?

    Want to know more about this particle series? Sign up for the newsletter: labinfo@horiba.com Modern Particle Characterization Technique Series II: Laser Diffraction Thursday, May 28, 2020 © 2020 HORIBA, Ltd. All rights reserved. 30

  31. Slide 31: © 2020 HORIBA, Ltd. All rights reserved.

    © 2020 HORIBA, Ltd. All rights reserved. 31

  32. Slide 32: © 2020 HORIBA, Ltd. All rights reserved.

    © 2020 HORIBA, Ltd. All rights reserved. 32

Horiba — Technical Presentation (April 2020) on 6ix