Baker Hughes Company · NASDAQ:BKR
Baker Hughes — Technical Presentation (October 2026)
17 slides from Baker Hughes's technical presentation, Oct 24, 2026
Slide 1: DuraMax High-performance motors
DuraMax High-performance motors Presenter’s name Copyright 2020 Baker Hughes Company. All rights reserved. The information contained in this document is company confidential and proprietary property of Baker Hughes and its affiliates. It is to be used only for the benefit of Baker Hughes and may not
Slide 2: Modern motor solution
Modern motor solution • Highly engineered and fully modeled motor offering • Increased operational envelope • Robust and durable • Multi-run capable tools 2 Copyright 2020 Baker Hughes Company. All rights reserved. 81664
Slide 3: DuraMax motor increased operational envelope
DuraMax motor increased operational envelope Higher Optimized High build rate High WOB durability and power capability and rotating capability robustness sections limits • High load and long • Ground up re-design • New contours • High strength components life bearings • Modern engineering • Improved
Slide 4: Design overview: Optimized power sections
Design overview: Optimized power sections New stator tube design: New contour layout: • Stronger Baker Hughes proprietary connections • Optimized for DOWNHOLE performance • Larger tube ID supporting highest • Novel R/S-Fit concept performance power sections • High flow capable (360gpm) • 15% more to
Slide 5: Design overview: Lower end
Design overview: Lower end High load capable bearing assembly: • High WOB up to 180kN / 40 klbs • Short BTB Improved ako design: • Withstands highest bit side loads • Baker Hughes proprietary thread design • Withstands highest bending loads • Foolproof AKO scribeline HIGH TORQUE CAPABLE DRIVE (Angle
Slide 6: 5-1/8-in. DuraMax motor platform
5-1/8-in. DuraMax motor platform Specifications Available power sections Short bit-to-bend 4.1 ft Pre-contoured 1.00 rpg, 5/6, 13 stage High load, long life PDC bearings 40 klbs WOB Pre-contoured 0.75 rpg, 5/6. 9.5 stage Increased flow rate 360 gpm Conventional 0.75 rpg, 5/6, 9.5 stage Increased tor
Slide 7: DuraMax motor nomenclature D100-5130C
DuraMax motor nomenclature Power section Number of lobes (rotor) C = Conventional DuraMax implies 5/6 lobe geometry P = Pre-contoured D100-5130C Number of stages Revolutions per gallon (RPG) Implied decimal after the Implied decimal after the first number second number i.e. 100 = 1.00 rpg; 075= 0.75
Slide 8: DuraMax motor nomenclature examples
DuraMax motor nomenclature examples Size Nomenclature Description 1.00 revolutions per gallon, 5/6 rotor/stator, 13 stages, 5-1/8 D100-5130P Pre-contoured stator 0.75 revolutions per gallon, 5/6 rotor/stator, 9.5 stages, 5-1/8 D75-5095P Pre-contoured stator 0.50 revolutions per gallon, 5/6 rotor/sta
Slide 9: Pre-contoured power section
Pre-contoured power section 5-1/8-in. D100-5130P 5-1/8-in. D075-5095P RPG: 1.00 Op. Power: 405 hp RPG: 0.75 Op. Power: 295 hp Stages: 13.0 Op. Torque: Stages: 9.50 Op. Torque: Flow Rate: 105 – 360 gpm 5,780 ft-lbs Flow Rate: 105 – 360 gpm 5,770 ft-lbs Diff. Pressure: 2,685 Max. Power: 540 Diff. Pres
Slide 10: Conventional power section
Conventional power section 5-1/8-in. D75-5095C 5-1/8-in. D50-5065C RPG: 0.75 Op. Power: 260 hp RPG: 0.50 Op. Power: 175 hp Stages: 9.50 Op. Torque: Stages: 6.50 Op. Torque: Flow Rate: 105 – 360 gpm 5,050 ft-lbs Flow Rate: 105 – 360 gpm 5,095 ft-lbs Diff. Pressure: 1,965 Max. Power: 345 Diff. Pressur
Slide 11: DuraMax motor nomenclature D100-5130C
DuraMax motor nomenclature Power section Number of lobes (rotor) C = Conventional DuraMax implies 5/6 lobe geometry P = Pre-contoured D100-5130C Number of stages Revolutions per gallon (RPG) Implied decimal after the Implied decimal after the first number second number i.e. 100 = 1.00 rpg; 075= 0.75
Slide 12: DuraMax motor nomenclature examples
DuraMax motor nomenclature examples Size Nomenclature Description 1.00 revolutions per gallon, 5/6 rotor/stator, 13 stages, 5-1/8 D100-5130P Pre-contoured stator 0.75 revolutions per gallon, 5/6 rotor/stator, 9.5 stages, 5-1/8 D75-5095P Pre-contoured stator 0.50 revolutions per gallon, 5/6 rotor/sta
Slide 13: High-performance motors ROP results
DuraMax high-performance motors Rockies (Bakken, Three Forks, Powder River Basin), Permain (Wolfcamp A, B, Lower Sprayberry), and Canada >650,00 >10KFT / 46 FASTEST LATERAL HRS. +25%- ROP FEET DRILLED 0 DRILLED 40% 116 AND (AS OF MID-APRIL 3 FT SINGLE TD~9k-10k RUN RUNS 2019) CONSISTENT 30% 6 DOUBLE
Slide 14: Case study: Williston Basin, North Dakota
Case study: Williston Basin, North Dakota 5 1/8-in. DuraMax motor DRILLE FASTES SAVE Lateral section days vs depth 10000 10,294 LATERA 12000 3.3 D T 14000 LATERAL DRILL D 16000 FT. MD L 18000 46 IN 20000 FOR ED 22000 CUSTOMER DRILLING 24000 LOW 0 1 2 3 4 5 6 7 DRILLING FOOTPRINT VIBRATION DAYS Days
Slide 15: Case study: Midland County, Texas, Wolfcamp A
Case study: Midland County, Texas, Wolfcamp A 5 1/8-in. DuraMax motor SAVE DRILLE DELIVER 7,652 FT. CONSISTE ED 3 D D BURN IN NT 80 3,12 IN CURVE OF RIG DAYS DRILLING ACHIEVE TIME MAINTAINE FEET 114 D PER D FT./HR HOURS DAY ROP OF DAILY 7 FOOTAGE 15 Copyright 2020 Baker Hughes Company. All rights re
Slide 16: Case study: Midland County, Texas
Case study: Midland County, Texas 5 1/8-in. DuraMax motor ONE- DRILLE MAINTAINED ROP LATER RUN TO TOTAL 9.5 65 9,529 D INCREAS FEET PER HOU AL DEPTH FT. LATERAL R % IN E 17.1 INCREAS 14 IN FOOTAGE/ AVERAGE DAY DRILLING % IN E OVERALL AVERAGE HOURS ROP 16 5 Copyright 2020 Baker Hughes Company. All ri
Slide 17: Baker Hughes
Baker Hughes ==
Baker Hughes Company — Technical Presentation (October 2026) on 6ix