Energy Conversion Devices

Energy Conversion Devices — Technical Presentation (December 2007)

26 slides from Energy Conversion Devices's technical presentation, Dec 11, 2007

  1. Slide 1: Project Review: A New Method for the Production of Hydrogen from Bioethanol/Biomethanol

    Project Review A New Method for the Production of Hydrogen from Bioethanol/Biomethanol Fuel Alcohols:(Methanol, Ethanol) Sugars:(Glucose, Fructose) H2 Fuel Cell, Electricity Starch:(Cornstarch, Reforming ICE, potatostarch) etc. Fossil Fuels:(Methane, Reactor Coal, Gasoline) Biomass:(Grass, Wood chip

  2. Slide 2: Motivation for the Project

    Motivation for the Project • Increased interest in using hydrogen produced from renewable fuel for low cost and clean energy production. • Hydrogen is produced today from non-renewable source (natural gas). • The cost of delivering hydrogen is high therefore distributed hydrogen production can reduc

  3. Slide 3: Goals of the Project

    Goals of the Project • Develop ECD’s Base-Facilitated Reforming (BFR) process and demonstrate its feasibility in reforming biofuels (ethanol and methanol) to hydrogen gas. • Demonstrate a continuous flow BFR prototype reactor which produces > 100 gram H2 per day and utilizes this H2 for production o

  4. Slide 4: Executive Summary

    Executive Summary • Base-Facilitated Reforming (BFR) has been developed from a concept and preliminary laboratory experiments to a prototype system shows commercial viability. • A BFR liquid phase prototype device generating 100 gram hydrogen per day from methanol and ethanol has been demonstrated.

  5. Slide 5: What is Base-Facilitated Reforming (BFR)?

    What is Base-Facilitated Reforming (BFR)? ƒ Alkaline material is used as a reactant in the reformation process ƒ Environmentally benign solid, carbonate salt is formed as a product instead of CO2 BFR Conventional Reformation NaOH, KOH etc.. H2O(steam) H2, CO2, (CO) (H2O) H2 Fuel Fuel Na2CO3, K2CO3 e

  6. Slide 6: Steam Reforming Process

    Steam Reforming Process Fuel CO2 H2 + CO H2+CO2 Pressure H2 Fuel cell Water Gas Shift Reactor catalyst Swing ICE Absorption H2O(steam) 6 Energy Conversion Devices, Inc. / Ovonic Materials Division

  7. Slide 7: Base-Facilitated Reformation Process

    Base-Facilitated Reformation Process Simple One Step Reaction-High Purity Hydrogen Fuel H2 Fuel cell Reactor ICE NaOH H2O Carbonate recycling 7 Energy Conversion Devices, Inc. / Ovonic Materials Division

  8. Slide 8: Example – Ethanol (C2H5OH)

    Example – Ethanol (C2H5OH) Base-Facilitated Reforming C2H5OH + 4NaOH + H2O ↔ 2Na2CO3 + 6H2 Steam Reforming C2H5OH + 3H2O ↔ 2CO2 + 6H2 C2H5OH + H2O ↔ 2CO + 4H2 2CO + 2H2O ↔ 2CO2 + 2H2 Gas Shift ------------------------------------- C2H5OH + 3H2O ↔ 2CO2 + 6H2 8 Energy Conversion Devices, Inc. / Ovonic

  9. Slide 9: Comparison of Thermodynamic Parameters of Reformation in BFR and SR

    Comparison of Thermodynamic Parameters of Reformation of Some Fuels in the BFR and SR Process Fuel Δ G° (Kcal/mole) ΔH° (Kcal/mole) CH4 (SR) +31.2 +60.5 CH4 (BFR) +0.55 +12.9 CH3OH (SR) +2.2 +31.5 CH3OH (BFR) -28.5 -9.7 C2H5OH (SR) +23.3 +83.3 C2H5OH (BFR) -38.3 +1.0 BFR Process has favorable thermo

  10. Slide 10: Advantages of BFR Process

    Advantages of BFR Process • One step reaction – making reformer design simpler • No CO or CO2 gases formed – Gas shift and PSA not necessary. • Greener process – CO2 collected as Na2CO3 • Lower operating temperatures (130˚c vs 350˚-800˚c). Liquid phase reformation is possible • Lower heat (ΔH˚) requ

  11. Slide 11: Systems Investigated

    Systems Investigated Two systems investigated: (a) Liquid phase reforming (b) Gas phase reforming Fuel (l) Fuel (g) (a) (b) H2 Fuel cell H2 Fuel cell Reactor ICE Reactor ICE NaOH(diss) H O (l) NaOH(s) H2O (g) 2 11 Energy Conversion Devices, Inc. / Ovonic Materials Division

  12. Slide 12: Reactors For Base-Facilitated Reforming

    Reactors For Base-Facilitated Reforming Reactors developed Semi-Continuous Test setup before project started during project Batch Lab batch reactor 100 ml open volume Semi-Continuous reactor with (rate: 3L H2/hr for storage tank 4L open volume 0.5hrs) (rate: 10L H2/hr for 8 hrs) 12 Energy Conversion

  13. Slide 13: Base-Facilitated Liquid Phase Continuous Flow Reactor

    Base-Facilitated Liquid Phase Continuous Flow Reactor H2 Gas/liquid Separator Reactor Fuel Storage Pump 13 Energy Conversion Devices, Inc. / Ovonic Materials Division

  14. Slide 14: New Base-Facilitated Pilot Fluidized Bed Reactor

    New Base-Facilitated Pilot Fluidized Bed Reactor H2 Hydroxide Reactant Solid Product Heaters Liquid Fuel Liquid Fuel Reactant Vaporizer 14 Energy Conversion Devices, Inc. / Ovonic Materials Division

  15. Slide 15: Milestones Along the Way

    Milestones Along the Way (a) Studied and identified process parameters and their effect on reforming rate: – Catalyst – Temperature – Type of alkaline material – Fuel activity (fuel/water ratio) – Alkaline concentration (liquid phase) – Fuel pressure (gas phase) (b) Optimized process parameters for

  16. Slide 16: Selected Optimum Parameters for Liquid Phase BFR Reformation

    Selected Optimum Parameters for Liquid Phase BFR Reformation Methanol Ethanol Parameter Optimized Parameter Optimized selection selection Catalyst Ni-A Catalyst Ni-B Specific catalytic 1.8 liter H2/hr.gr- Specific catalytic rate 2.7 liter H2/hr.gr- rate catalyst catalyst Base material NaOH Base mate

  17. Slide 17: Selected Optimum Parameters for Gas Phase BFR Reformation

    Selected Optimum Parameters for Gas Phase BFR Reformation Parameter Optimized selection Catalyst Ni-C Specific catalytic rate 1.5 liter H2/hr.gr-catalyst (methanol) Specific catalytic rate 2.0 liter H2/hr.gr-catalyst (ethanol) Base material NaOH(methanol) KOH (ethanol) Temperature 220˚C Fuel Pressur

  18. Slide 18: Continuous Liquid Phase Reactor – Effect of Space Velocity on Rate

    Continuous Liquid Phase Reactor – Effect of Space Velocity on Rate 1 0.9 Hydrogen production rate 130°C 0.8 (lier/hr.g catalyst) 0.7 0.6 0.5 0.4 Methanol 0.3 Ethanol 0.2 0 0.5 1 1.5 2 2.5 3 Liquid space velocity (VMSV), 1/min 18 Energy Conversion Devices, Inc. / Ovonic Materials Division

  19. Slide 19: BFR Prototype Reactor – Hydrogen Production Rate vs Time of Operation

    BFR Liquid Phase Continuous Flow Prototype Reactor – Hydrogen Production Rate vs Time of Operation 120.0 H2 production rate (gr/day) 115.0 110.0 105.0 100.0 95.0 90.0 85.0 80.0 0 5 10 15 20 25 time(hrs) 19 Energy Conversion Devices, Inc. / Ovonic Materials Division

  20. Slide 20: Operation of Light Bulb and Portable TV from BFR Hydrogen

    Operation of 100 Watts Light Bulb and Portable TV from Portable Generator Fed by BFR Hydrogen 20 Energy Conversion Devices, Inc. / Ovonic Materials Division

  21. Slide 21: Economics of Base-Facilitated Reformation

    Economics of Base-Facilitated Reformation ƒ Used DOE H2A economic analysis tool ƒ Net present value with Internal Rate of Return (IRR): 10% ƒ 20 years depreciation on facility equipment ƒ 10 years depreciation on reactor ƒ Cost of feedstock and electricity taken from Energy Information Administratio

  22. Slide 22: Projected Cost Structure of Hydrogen from Methanol and Ethanol

    Projected Cost Structure of Hydrogen from Methanol and Ethanol at Production Rate of 1,500 kg H2 Per Day Methanol Feedstock ($2.54/kg) $0.31 $0.68 Capital eq Fixed O&M Feedstock Utilities $1.17 $0.38 Ethanol Feedstock ($3.59/kg) $0.31 $0.71 Capital eq Fixed O&M $0.38 Feedstock Utilities $2.19 22 Ene

  23. Slide 23: Comparison of Cost of Hydrogen Produced by the BFR Process with Other Fuels

    Comparison of Cost of Hydrogen Produced by the BFR Process with Other Fuels High Heating Cost($) Cost/mmBtu Value(Btu) Gasoline(gallon) - 125000 2.8 22.40 w/taxes Diesel(gallon)- 130500 2.80 21.46 w/taxes Ethanol(gallon) 84000 1.37 16.30 Methanol (gallon) 65200 0.55 8.45 Natural Gas 1000000 6.72 6.7

  24. Slide 24: Comparison of Cost of Electricity by Technology

    Comparison of Cost of Hydrogen Produced by the BFR Process with Other Fuels Technology-CHP (Fuel) Cost of Electricity ($/KWh) Micoturbine-CHP (Diesel) 0.17 Microturbine-CHP (Ethanol) 0.136 Microturbine-CHP (Methanol) 0.087 Microturbine-CHP (Natural Gas) 0.086 MIcroturbine-CHP (Hydrogen 0.152 ECD’s p

  25. Slide 25: Summary

    Summary ƒ Understanding of the Base-Facilitated Reforming process has been obtained and its feasibility demonstrated in a prototype continuous reactor producing 100 grams H2 per day able to produce electricity. ƒ Significantly lower operating temperatures compared to conventional reforming and opera

  26. Slide 26: Benefits of Program

    Benefits of Program • Technology has advanced from a beaker experiment to a high pressure continuous system. • Process has demonstrated a clean simple source of hydrogen without creation of CO2 global warming gas. • Reforming technology can be cross utilized on other low cost feedstock such as switc

Energy Conversion Devices — Technical Presentation (December 2007) on 6ix