ANSYS — Technical Presentation (February 2007)
181 slides from ANSYS's technical presentation, February 2007
Slide 1: ANSYS v11.0 New Feature Update
ANSYS v11.0 New Feature Update © 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Slide 2: Agenda
Agenda • Mechanical Solutions • Workbench Environment – Elements – Simulation – Contact – Meshing – Materials – DesignModeler – Dynamics – Parameter Manager – Thermal – DesignXplorer • Multiphysics Solutions – CAD Support – Coupled Physics • Explicit Solutions – HF EMAG – AUTODYN – LF EMAG – AUTODYN
Slide 3: Elements
Elements © 2006 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
Slide 4: Higher Order Shell 281
Elements Higher Order Shell 281 • Capabilities of SHELL91, SHELL93 SHELL191, SHELL99, Shell181 • May be used in six node triangular • Capabilities – Finite Strain/Large rotation – All materials availabl – Layered composite and sandwich shells thru shell sections – Mass inertia, Coriolis damping term
Slide 5: Rebars/Reinforcements
Elements Rebars/Reinforcements • REINF265 (3-D smeared reinforcement) – Large deflection, finite strain – Allow multiple reinforcement layers: up to 250, defined with section commands – Support: 3D visualization, most of structural materials – Base elements can be: SOLID185, SOLID186, SOLID187, SOLS
Slide 6: Tire Analysis
Elements Tire Analysis Outer Layer of the tire made of Nylon Material Tire Inner layer of the Rim Tire made of Polyester Carcass (Red color) Middle layer of the Tire made of Steel material Representative (Pink color) Road surface © 2006 ANSYS, Inc. All rights reserved. 6 ANSYS, Inc. Proprietary
Slide 7: Tire Analysis
Elements Tire Analysis Predicted displacements Each base element contains 4 REINF Predicted elastic strains layers. Reinforcements in different layers have different orientations. © 2006 ANSYS, Inc. All rights reserved. 7 ANSYS, Inc. Proprietary
Slide 8: Layered Solids for Composites
Elements Layered Solids for Composites • Layered option for SOLID 185 – Activated through keyopt(3)=1 • Support enhanced strain and mixed u/P formulation • Support FiberSIM and 3D visualization An Example: Stringer Web Contact Standard Composite stiffened panel Stringer Flange Contact Bonded Ski F n
Slide 9: User Element (USER300)
Elements User Element (USER300) • New user element USER300 – Define user elements through API – No need to understand ANSYS database and file structure – Don’t have to have its material routines, all ANSYS structural material routine can be called – Can have its own: – Element convergence criterion
Slide 10: Joint Element
Element Joint Element • MPC184 • Supports – Point-in-plane joint – Linear/nonlinear, – Prismatic large rotation (translation) – Linear and nonlinear – Cylindrical joint stiffness and – Planar joint damping – Weld joint – Hysteretic frictional – Orient joint – Stops and locks on the free degrees of f
Slide 11: Mass21
Element Mass21 • Structural mass element (MASS21) now supports acceleration loads (such as those applied via the ACEL or OMEGA command). • New form of boundary conditions for structural analysis – Velocity boundary condition for large rotations – D,node,LAB,value – LAB: • VELX,VELY,VELZ – velocity i
Slide 12: Other enhancements
Elements Other enhancements • Surface elements (SURF151,152,153,154, and 156) – New option KEYOPT(7) to allow surface load to work on the original area • Surface elements (SURF153, and 156) – New option KEYOPT(2) to allow loads to be in the element coordinate system © 2006 ANSYS, Inc. All rights res
Slide 13: Other enhancements
Elements Other enhancements • Failure criteria processing – Extended LAYER, FCMAX to all layered elements and the new reinforcement element – Added new item FCMX to process the largest failure criteria over the entire element – Added new item FAIL to list and plot a particular failure criteria or th
Slide 14: Nonlinear Stabilization
Element Nonlinear Stabilization • Convergence difficulties: – Mesh distorted too much (rezoning) – Global instability (arc-length) – Local instability • Material softening • Wrinkling • Deformed region unconstrained – Unreasonable mechanical model • Load is not realistic • Material model: Damage • S
Slide 15: Nonlinear Stabilization
Elements Nonlinear Stabilization • Nonlinear stabilization – Applications: • Makes ANSYS first time be able to simulate local buckling and post local buckling within static analysis • Simulates global buckling, snap-through problems where arc- length can not be used • Overcomes convergence difficult
Slide 16: Nonlinear Stabilization
Element Nonlinear Stabilization © 2006 ANSYS, Inc. All rights reserved. 16 ANSYS, Inc. Proprietary
Slide 17: Contact
Contact © 2006 ANSYS, Inc. All rights reserved. 17 ANSYS, Inc. Proprietary
Slide 18: Debonding and Contact
Contact Debonding and Contact • Applications – Delamination of composites – Decohesion of surfaces bonded with adhesives, stitches ... • Primary interest in tension/opening • Separation behavior is described by a traction separation law • Provides a capability for separation/opening of bonded contac
Slide 19: Debonding and Contact
Contact Debonding and Contact • Used with 2D and 3D contact elements • Supports augmented Lagr., penalty methods • Debonding can be used to model failure modes – Mode I (normal) , Mode II (tangential) or Mixed mode (mode I and mode II) – Debonding is available for bonded contact • Specified through
Slide 20: 3-D Line-surface contact
Contact 3-D Line-surface contact Node-to- Node-to- Surface- Line-to- Line-to- Technology Node Surface to-Surface Line Surface Sliding SMALL LARGE LARGE LARGE LARGE Pure Lagrange Y Y Y Y Y Augmented Lagrange Y Y Y Y Y Lagrange (Normal)/ Y Y Y Y Y Penalty (Tangent) MPC Y Y Y Y Contact Stiffness SEMI-A
Slide 21: Line/Line & Line/Surface Contact
Contact Line/Line & Line/Surface Contact © 2006 ANSYS, Inc. All rights reserved. 21 ANSYS, Inc. Proprietary
Slide 22: Rigid Body Modeling & Contact
Contact Rigid Body Modeling & Contact • Rigid body modeling via MPC contact • Rigid contact uses augmented Lagrange or penalty methods • Large deformation based MPC’s © 2006 ANSYS, Inc. All rights reserved. 22 ANSYS, Inc. Proprietary
Slide 23: Materials
Materials © 2006 ANSYS, Inc. All rights reserved. 23 ANSYS, Inc. Proprietary
Slide 24: Gurson Model
Materials Gurson Model • Process of ductile metal damage and failure includes void nucleation, growth, and coalescence; • Void growth and nucleation are strongly dependent on stress field; and • Macroscopic behaviors can be predicted from development of damage at microscopic level • New TB, GURSON m
Slide 25: Hyperelasticity
Materials Hyperelasticity • Anisotropic hyperelasticity (TB,AHYPER) supports the plane stress state for: – SHELL181 – SHELL281 – PLANE182 with KEYOPT(3)=0,or 3 – PLANE183 with KEYOPT(3)=0,or 3 • Application A – Polymers A – Polymer composites C B – Biomaterials B C © 2006 ANSYS, Inc. All rights rese
Slide 26: Cap Drucker-Prager Model
Materials Cap Drucker-Prager Model • Cap Drucker-Prager plasticity model applicable to – Simulation granular materials such as soils – Powder compaction simulation – The model has also been utilized for modeling pressure-dependent plasticity of polymers • Applicable to PLANE182-183 (except for plane
Slide 27: Soil excavation analysis using EDP model
Materials Cap Drucker-Prager Model Soil excavation analysis using EDP model Without Reinforcements Plastic Strain With Reinforcements Settling of Soil Displacement © 2006 ANSYS, Inc. All rights reserved. 27 ANSYS, Inc. Proprietary
Slide 28: Fracture Mechanics
Materials Fracture Mechanics • Tool for parameters calculation such as J Integrals • Calculations done in the solution after stress pass • Elements supported – 182, 183, 185, 186, 187 (No composite sections) • Material options – Linear elasticity – Elastic-plastic material – Finite deformation (NLGE
Slide 29: Fracture Mechanics
Materials Fracture Mechanics Pump housing subjected to internal pressure with a through crack Crack 0.16 Inner surface Path 1 J Integral 0.12 Path 2 Calculations Path 3 0.08 Path 4 Path 5 0.04 0 0 1 2 3 4 © 2006 ANSYS, Inc. All rights reserved. 29 Outer surface ANSYS, Inc. Proprietary
Slide 30: Initial State Definition
Materials Initial State Definition • Applications – Residual stress/strain • Structure components subject to external/internal loading beyond the elastic limit, the components will accrue some permanent deformation after the loading is removed – Pre-stressed reinforcement • A technique widely in a l
Slide 31: Initial State Definition
Materials Initial State Definition • NEW Initial state procedure – Easy to use • Repeatable command • No element dependency – Data definition • Element based, material based • Coordinate system (where applicable) – Input method • Command, or by a file (flexible and well formatted) – Support most of
Slide 32: Initial State Definition
Materials Initial State Definition Pre-Stressed Beam with material based initial stress definition © 2006 ANSYS, Inc. All rights reserved. 32 ANSYS, Inc. Proprietary
Slide 33: Dynamics
Dynamics © 2006 ANSYS, Inc. All rights reserved. 33 ANSYS, Inc. Proprietary
Slide 34: Rotordynamics
Dynamics Rotordynamics • Rotor dynamics is the study of rotating machines and has a very important part to play throughout the modern industrial world. • Rotating machinery is used in many applications: – Turbomachines – Power Stations – Machine tools – Automobiles – Household machines – Aerospace a
Slide 35: Rotordynamics
Dynamics Rotordynamics Static Analysis • Analysis Type – Static – Modal – Harmonic – Transient • Elements/Models – Solids Modal Analysis – Beams – Shells – Bearing/Springs – Multispool Rotors • Post-Processing – Campbell Diagram – Orbit plots © 2006 ANSYS, Inc. All rights reserved. 35 ANSYS, Inc. Pr
Slide 36: Rotordynamics
Dynamics Rotordynamics Multi-Spool Rotor Transient Analysis Harmonic Analysis Orbit Plots © 2006 ANSYS, Inc. All rights reserved. 36 ANSYS, Inc. Proprietary
Slide 37: Component Mode Synthesis
Dynamics Component Mode Synthesis • In addition to its existing support for modal analysis, the CMS now supports static, transient, harmonic, spectrum, and substructure prestress analyses. © 2006 ANSYS, Inc. All rights reserved. 37 ANSYS, Inc. Proprietary
Slide 38: Component Mode Synthesis
Dynamics Component Mode Synthesis • New CMS option for accurate representation of higher freq. modes using Residual Flexiblity Free Interface Method • CMS substructures are now supported in – Transient ( full and modal ) Analysis – Harmonic ( full and modal ) Analysis Acoustic CMS Analysis © 2006 AN
Slide 39: Brake Squeal Analysis
Dynamics Brake Squeal Analysis • New CMROTATE command to specific relative slip between rotating parts for brake squeal • QRDAMP Solver with unsymmetric terms from contact analysis with friction Brake Model Unstable Modes © 2006 ANSYS, Inc. All rights reserved. 39 ANSYS, Inc. Proprietary
Slide 40: Improved Eigen solvers
Dynamics Improved Eigen solvers • MODOPT, UNSYMM – High performance eigensolver employing the sparse direct solution method for the matrix equation solution – The iteration loop is based on a Frequency Derivative (FD) algorithm. – Prior to Rel. 11.0 it used a Frontal Solver based Lanczos eigensolver
Slide 41: Residual Vector method
Dynamics Residual Vector method • The residual vector method calculates effect of residual stiffness using eigen modes. • ANSYS New Commands – RESVEC,ON or OFF • Analysis Type 3.0E- 5 case11(direct) – modal harmonic/transient 2.0E- 5 case12(res- 40) – CMS: Residual-Flexible Free 1.0E- 5 interface me
Slide 42: Modal Transient Restart
Dynamics Modal Transient Restart • Applications – Long running modal transient runs – Dynamics of nuclear reactor and piping systems – Restart with a different transient loading from a desired time point • Now supports – Single and Multi-Frame restarts • Works very similar to non-linear static and t
Slide 43: PSD Support in WB
Dynamics PSD Support in WB PSD Environment in WB PSD curve specification in EDA © 2006 ANSYS, Inc. All rights reserved. 43 ANSYS, Inc. Proprietary
Slide 44: Rigid/Flexible Dynamics Agenda
Dynamics Rigid/Flexible Dynamics Agenda • Overview of the new Dynamics solution – Enhancement to NL transient capabilities for doing purely rigid simulations • Joint Types • UI walkthrough • Sample problems © 2006 ANSYS, Inc. All rights reserved. 44 ANSYS, Inc. Proprietary
Slide 45: Rigid/Flexible Dynamics Solution
Dynamics Rigid/Flexible Dynamics Solution • Extend existing ANSYS products for solution of large rotation, large deflection mixed rigid and flexible body simulations • Use same WB interface for both Rigid and Flexible: – Learn one, you learn them both – Set up model and verify using rigid model assu
Slide 46: Rigid Dynamics
Dynamics Rigid Dynamics • Enhanced 11.0 dynamics solver – Very fast (via rigid abstraction rather than mesh) – Solve time typically measured in seconds, not minutes • Use to study a completely rigid system only – All parts assumed infinitely stiff – All part interaction via defined joints – No part/
Slide 47: Flexible Dynamics Enhancements
Dynamics Flexible Dynamics Enhancements • Improvements to ANSYS Structural and above products: – New Joint Options in MPC184 – Large Rotations in Transient Dynamic simulations – Improvements to HHT time integration scheme – Rigid parts via MPC Contact Use to study: – Rigid contact improvements • Rig
Slide 48: Joint Types
Dynamics Joint Types Spherical Revolute Cylindrical Planer Universal Translational Slot © 2006 ANSYS, Inc. All rights reserved. 48 ANSYS, Inc. Proprietary
Slide 49: Model Walk Through: Create Joints / Assemble Parts
Dynamics Model Walk Through Create Joints / Assemble Parts (Body Views) © 2006 ANSYS, Inc. All rights reserved. 49 ANSYS, Inc. Proprietary
Slide 50: Model Walk Through: Exercise Joints
Dynamics Model Walk Through Exercise Joints (Kinematics) © 2006 ANSYS, Inc. All rights reserved. 50 ANSYS, Inc. Proprietary
Slide 51: Model Walk Through: Transient Dynamics
Dynamics Model Walk Through Transient Dynamics Postprocessing © 2006 ANSYS, Inc. All rights reserved. 51 ANSYS, Inc. Proprietary
Slide 52: From Rigid to Flexible Step 1
Dynamics From Rigid to Flexible Step 1 - Add Flexible Dynamics Analysis to solution leg of tree © 2006 ANSYS, Inc. All rights reserved. 52 ANSYS, Inc. Proprietary
Slide 53: From Rigid to Flexible Step 2
Dynamics From Rigid to Flexible Step 2 - Change part definition from Rigid to Flexible © 2006 ANSYS, Inc. All rights reserved. 53 ANSYS, Inc. Proprietary
Slide 54: From Rigid to Flexible Step 3
Dynamics From Rigid to Flexible Step 3 - Preview Flexible Part Mesh © 2006 ANSYS, Inc. All rights reserved. 54 ANSYS, Inc. Proprietary
Slide 55: From Rigid to Flexible Step 4
Dynamics From Rigid to Flexible Step 4 - Set Analysis Options for time step etc. and solve © 2006 ANSYS, Inc. All rights reserved. 55 ANSYS, Inc. Proprietary
Slide 56: Examples Models
Dynamics Examples Models Folding Mechanism Overhead Valve Engine © 2006 ANSYS, Inc. All rights reserved. 56 ANSYS, Inc. Proprietary
Slide 57: Thermal Analysis
Thermal Analysis © 2006 ANSYS, Inc. All rights reserved. 57 ANSYS, Inc. Proprietary
Slide 58: General Thermal Enhancements
Thermal Analysis General Thermal Enhancements • For FLUID116 material properties can be table inputs – Fluid properties can be evaluated as a function of pressure, temperature, velocity, time, and location. • For MASS71 allows tabular heat generation via the MP,QRATE • SHELL131 and SHELL132 elements
Slide 59: General Thermal Enhancements
Thermal Analysis General Thermal Enhancements • Heat generation rates may be input as element body loads on LINK34 elements. • Multiframe restarts with the thermal solver (THOPT,FULL). • The fast thermal solver (THOPT,QUASI) allows single and multiframe restarts © 2006 ANSYS, Inc. All rights reserve
Slide 60: HTI Products
Thermal Analysis HTI Products • All products now export the meshes to ANSYS and Workbench • PTD – Model generation nearly ten times faster – Package-on-Package simulation • TASPCB – 3D voltage drop simulation accounting for losses in traces, planes and vias – A simplified board can be exported to Ic
Slide 61: Coupled Physics Analysis
Coupled Physics Analysis © 2006 ANSYS, Inc. All rights reserved. 61 ANSYS, Inc. Proprietary
Slide 62: 22x Coupled-Field Analyses
22x Coupled-Field Analyses • New electroelastic analysis – now available on KEYOPT(1)=1001 PLANE223 – KEYOPT(4) controls the electrostatic 2-D 8-node force application quadrilateral • in the volume of the dielectric (0) • at the solid-air interface (1) Elastic dielectrics KEYOPT(4)=0 Electroelastic
Slide 63: Dielectric Elastomer Actuator
Coupled Physics Analysis Dielectric Elastomer Actuator Compliant • A voltage is applied between the electrode electrodes • Maxwell electrostatic pressure arises Elastomeric • The elastomer compresses in the material thickness and expands in the plane directions Electro-Elastic Strain 0.25 Induced St
Slide 64: Electrostatically Actuated Beam
Coupled Physics Analysis Electrostatically Actuated Beam • A clamped beam for an RF MEMS switch “Elastic air” is modeled to compute the center deflection for an applied voltage Air gap = 5 µm • Forces generated by the electrostatic field will bend the beam towards the ground Dielectric beam Ground p
Slide 65: Piezoelectric Vibratory Gyroscope
Coupled Physics Analysis Piezoelectric Vibratory Gyroscope • A piezoelectric gyroscope for an angular rate sensor is excited into an in-plane vibration by applying an alternating voltage at f=32728 Hz • The tuning fork is rotated around the axis parallel to the tines 0 Volt 1 Volt • The Coriolis for
Slide 66: Piezoelectric Vibratory Gyroscope
Coupled Physics Analysis Piezoelectric Vibratory Gyroscope • SOLID226 piezoelectric model of a quartz tuning fork with Coriolis effect in the rotating reference frame In-plane motion (primary vibration) Out-of-plane motion (secondary vibration proportional to the Coriolis force) © 2006 ANSYS, Inc. A
Slide 67: Electric Analysis with Open Boundaries
Coupled Physics Analysis Electric Analysis with Open Boundaries Voltage source Layer of INFIN111 elements SOLID232 mesh Electric potential distribution INF boundary • INFIN110 and INFIN111 elements have been enhanced to model far- field decay in electric conduction analysis: • new KEYOPT(1)=3 on INF
Slide 68: HF EMAG
HF EMAG © 2006 ANSYS, Inc. All rights reserved. 68 ANSYS, Inc. Proprietary
Slide 69: Complex Material
HF Emag Complex Material • Complex Material – Permittivity Tensor [εr] – Permeability Tensor [µr] – Electric Current Conductivity Tensor [σe] – Magnetic Current Conductivity Tensor [σm] – Magnetic Lossy Tangent – Ferrite • Link to magnetostatic solver for magnetic field solution © 2006 ANSYS, Inc. A
Slide 70: S-Parameter Enhancements
HF Emag S-Paramter Enhancements • S-Parameter Adaptive Meshing Solution – Perform adaptive iterations until the s- parameter convergences to required criteria by automatically refining mesh. – Multi-port for adaptive implementation – Direct and iterative solver in solution © 2006 ANSYS, Inc. All rig
Slide 71: Time Domain Reflectometry/Transmission
HF Emag Time Domain Reflectometry/Transmission • Time Domain Reflectometry (TDR) and Time Domain Transmission (TDT) – Display the waveform of the reflection wave and transmission wave at ports in time domain, based on frequency-domain S-parameter results – Display the total waveform at input port –
Slide 72: Renormalization of S-parameter
HF Emag • Renormalization of S-parameter – Renormalize S-parameter with new port characteristic impedance – S-parameter Touchstone file input – Output new s-parameter Touchstone file with updated characteristic impedance • QMR Iterative Complex Solver – More stable and efficient complex iterative so
Slide 73: LF EMAG
LF EMAG © 2006 ANSYS, Inc. All rights reserved. 73 ANSYS, Inc. Proprietary
Slide 74: LF Emag
LF Emag • Force calculations more accurate • Lorenz force available to the user • More element shapes handled • Better Emag user messages © 2006 ANSYS, Inc. All rights reserved. 74 ANSYS, Inc. Proprietary
Slide 75: Adaptive meshing
LF Emag Adaptive meshing • In Workbench and ANSYS • Same methods found in thermal and stress © 2006 ANSYS, Inc. All rights reserved. 75 ANSYS, Inc. Proprietary
Slide 76: Periodic boundary conditions
LF Emag Periodic boundary conditions • Capability now in Workbench © 2006 ANSYS, Inc. All rights reserved. 76 ANSYS, Inc. Proprietary
Slide 77: Simulation
Simulation © 2006 ANSYS, Inc. All rights reserved. 77 ANSYS, Inc. Proprietary
Slide 78: Changes to User Interface
Workbench Environment Changes to User Interface Analysis Environments © 2006 ANSYS, Inc. All rights reserved. 78 ANSYS, Inc. Proprietary
Slide 79: Changes to User Interface
Workbench Environment Changes to User Interface Rigid/Flexible Part Definition © 2006 ANSYS, Inc. All rights reserved. 79 ANSYS, Inc. Proprietary
Slide 80: Changes to User Interface
Workbench Environment Changes to User Interface Connections folder for Joints and Contact © 2006 ANSYS, Inc. All rights reserved. 80 ANSYS, Inc. Proprietary
Slide 81: Changes to User Interface
Workbench Environment Changes to User Interface Constant, Tabular and Function loads © 2006 ANSYS, Inc. All rights reserved. 81 ANSYS, Inc. Proprietary
Slide 82: Changes to User Interface
Workbench Environment Changes to User Interface Time history and Steps Post-Processing © 2006 ANSYS, Inc. All rights reserved. 82 ANSYS, Inc. Proprietary
Slide 83: Typed Analysis Environments
Workbench Environment Typed Analysis Environments © 2006 ANSYS, Inc. All rights reserved. 83 ANSYS, Inc. Proprietary
Slide 84: Multiple Load Step and Transient
Workbench Environment Multiple Load Step and Transient © 2006 ANSYS, Inc. All rights reserved. 84 ANSYS, Inc. Proprietary
Slide 85: File Management
Workbench Environment File Management Post-processing using ANSYS results file © 2006 ANSYS, Inc. All rights reserved. 85 ANSYS, Inc. Proprietary
Slide 86: File Management
Workbench Environment File Management © 2006 ANSYS, Inc. All rights reserved. File management on the project page 86 ANSYS, Inc. Proprietary
Slide 87: File Management
Workbench Environment File Management Saves ANSYS results and solver files © 2006 ANSYS, Inc. All rights reserved. 87 ANSYS, Inc. Proprietary
Slide 88: Legend
Workbench Environment Legend In-place editing Context menu options Numeric format control © 2006 ANSYS, Inc. All rights reserved. 88 ANSYS, Inc. Proprietary
Slide 89: Legend
Workbench Environment Legend Movable, sizable, color changes © 2006 ANSYS, Inc. All rights reserved. 89 ANSYS, Inc. Proprietary
Slide 90: Function and Tabular Loads
Workbench Environment Function and Tabular Loads • Mechanical and Thermal loads as a function of time – Tabular loads (load vs. time) – Function Loads e.g. “100*sin(5*time)” • ‘time’ is a reserved name used in the functions • Standard math operators “+,-,/,*,^” • Trigonometric functions “sin, cos, a
Slide 91: New Loads
Workbench Environment New Loads © 2006 ANSYS, Inc. All rights reserved. 91 ANSYS, Inc. Proprietary
Slide 92: Initial Contact Info
Workbench Environment Initial Contact Info Initial contact result contours are also available © 2006 ANSYS, Inc. All rights reserved. 92 ANSYS, Inc. Proprietary
Slide 93: Initial Conditions
Workbench Environment Initial Conditions Initial Conditions for Pre-stressed Modal © 2006 ANSYS, Inc. All rights reserved. 93 ANSYS, Inc. Proprietary
Slide 94: Symmetry
Workbench Environment Symmetry • Provide automated boundary condition support for symmetry models in Sim (Surface and Solid Bodies) – Symmetry – Anti-symmetry • Automatic transfer of Symmetry features in DM to Sim • Automated match face/edge meshing for future periodic/anti- periodic and cyclic © 20
Slide 95: New Report Generator
Workbench Environment New Report Generator © 2006 ANSYS, Inc. All rights reserved. 95 ANSYS, Inc. Proprietary
Slide 96: Probes: Springs & Joints
Workbench Environment Probes: Springs & Joints © 2006 ANSYS, Inc. All rights reserved. 96 ANSYS, Inc. Proprietary
Slide 97: Meshing
Meshing © 2006 ANSYS, Inc. All rights reserved. 97 ANSYS, Inc. Proprietary
Slide 98: Mesh preview & body meshing
Meshing Mesh preview & body meshing Bodies can be meshed separately Surface mesh preview © 2006 ANSYS, Inc. All rights reserved. 98 ANSYS, Inc. Proprietary
Slide 99: Global settings
Meshing Global settings © 2006 ANSYS, Inc. All rights reserved. 99 ANSYS, Inc. Proprietary
Slide 100: Automatic Quad Mesher
Meshing Automatic Quad Mesher © 2006 ANSYS, Inc. All rights reserved. 100 ANSYS, Inc. Proprietary
Slide 101: Solid-shell Meshing
Meshing Solid-shell Meshing Automated/Manual thin shell meshing with solid- shell elements: – No need for midsurfacing – Non-uniform thickness handling Eight node solsh190 mesh with NON-UNIFORM thickness © 2006 ANSYS, Inc. All rights reserved. 101 ANSYS, Inc. Proprietary
Slide 102: Inflation layers
Meshing Inflation layers © 2006 ANSYS, Inc. All rights reserved. 102 ANSYS, Inc. Proprietary
Slide 103: Smoothing controls
Meshing Smoothing controls Low Medium High © 2006 ANSYS, Inc. All rights reserved. 103 ANSYS, Inc. Proprietary
Slide 104: Transition controls
Meshing Transition controls Fast Slow © 2006 ANSYS, Inc. All rights reserved. 104 ANSYS, Inc. Proprietary
Slide 105: Bias controls
Meshing Bias controls On edges Through Thickness © 2006 ANSYS, Inc. All rights reserved. 105 ANSYS, Inc. Proprietary
Slide 106: Virtual Topology Enhancements
Meshing Virtual Topology Enhancements Edges are automatically merged as virtual edges © 2006 ANSYS, Inc. All rights reserved. 106 ANSYS, Inc. Proprietary
Slide 107: DesignModeler
DesignModeler © 2006 ANSYS, Inc. All rights reserved. 107 ANSYS, Inc. Proprietary
Slide 108: Automatic Shared Topology
DesignModeler Automatic Shared Topology For multi-body surface parts, you now have a choice for which method to use to share topology: • Edge Joints use shared edge pairs as used in DM 10.0. • Automatic will find shared topology automatically without needing joints. © 2006 ANSYS, Inc. All rights res
Slide 109: Symmetry C.S. Transfer
DesignModeler Symmetry C.S. Transfer Symmetry planes used in DM’s Enclosure and Symmetry features will automatically be transferred to Simulation as Coordinate Systems. User selects YZPlane in YZPlane automatically is YZPlane is transferred to Symmetry feature set to export the Simulation and is set
Slide 110: Sketch Projection
DesignModeler Sketch Projection Sketch Projection allows projection of model vertices, edges, faces, bodies, and PF points onto a plane, creating a sketch with fixed 2D points and edges that are associative with the selected topology. Plane and selected Solid Body 2D edges in Sketch Project Rotated
Slide 111: Hide Sketch
DesignModeler Hide Sketch Hide sketch allows you to turn off the display of sketches. Plane with 5 sketches All but one sketch hidden © 2006 ANSYS, Inc. All rights reserved. 111 ANSYS, Inc. Proprietary
Slide 112: Sketch Duplicate Tool
DesignModeler Sketch Duplicate Tool The Sketch Duplicate tool allows the user to copy edges and points from existing sketches or the plane boundary into a new sketch © 2006 ANSYS, Inc. All rights reserved. 112 ANSYS, Inc. Proprietary
Slide 113: Partial CAD Import
DesignModeler Partial CAD Import In DesignModeler 11.0, CAD models that failed to import will now be partially imported. Missing geometry can be reconstructed using DesignModeler’s repair tools. © 2006 ANSYS, Inc. All rights reserved. 113 ANSYS, Inc. Proprietary
Slide 114: Import/Attach Body Filtering
DesignModeler Import/Attach Body Filtering The “Process” property has been replaced by: Solid Bodies Surface Bodies Line Bodies © 2006 ANSYS, Inc. All rights reserved. 114 ANSYS, Inc. Proprietary
Slide 115: Surface Patch
DesignModeler Surface Patch Surface Patch: fill in gaps on Surface bodies. © 2006 ANSYS, Inc. All rights reserved. 115 ANSYS, Inc. Proprietary
Slide 116: Face Delete Healing Methods
DesignModeler Face Delete Healing Methods Automatic - Natural Healing - Patch Healing - No Healing Automatic tries both Surface Bodies also allow No Healing Natural Healing Patch Healing No Healing © 2006 ANSYS, Inc. All rights reserved. 116 ANSYS, Inc. Proprietary
Slide 117: Boolean Feature
DesignModeler Boolean Feature Boolean feature allows users to perform Boolean operations manually. Three operations are available: Union, Subtract, and Intersect. Union Intersect All Intersect All, Originals Sliced Subtract Union All Intersects Union All Intersects, Originals Sliced © 2006 ANSYS, In
Slide 118: Body Operation > Sew
DesignModeler Body Operation > Sew Sewing body operation allows the user to stitch the surface bodies together where they have edges common to within to a given tolerance. Before Sew Operation, After Sew Operation, Many Surfaces One Surface © 2006 ANSYS, Inc. All rights reserved. 118 ANSYS, Inc. Pro
Slide 119: Body Operation > Simplify
DesignModeler Body Operation > Simplify • Body Operation’s Simplify tool allows the user to simplify the geometry and/or topology of the model. Before Simplify Operation After Simplify Operation © 2006 ANSYS, Inc. All rights reserved. 119 ANSYS, Inc. Proprietary
Slide 120: Surface Flip
DesignModeler Surface Flip The Surface Flip feature reverses the orientation of surface bodies. This allows you to: – Perform Boolean operations between surface bodies that might otherwise fail due to opposed surface normal – Utilize contact better in Simulation – Consistency of Shell Element Orient
Slide 121: Slice by Surface
DesignModeler Slice by Surface The Slice by Surface operation allows the user to select a face for slicing, then slice by using the unbounded underlying surface of the selected face. Before Slice by Surface Operation After Slice by Surface Operation © 2006 ANSYS, Inc. All rights reserved. 121 ANSYS,
Slide 122: Global Parameter Manager
Global Parameter Manager © 2006 ANSYS, Inc. All rights reserved. 122 ANSYS, Inc. Proprietary
Slide 123: Parameter Manager General Information
Parameter Manager General Information • Displays all parameters within Workbench modules • View input and output parameters, change input parameter values and re-run the complete analysis to generate new output parameter values © 2006 ANSYS, Inc. All rights reserved. 123 ANSYS, Inc. Proprietary
Slide 124: Parameter Manager Expressions
Parameter Manager Expressions • Expressions within the parameter manager can be used to relate input parameters or create constant values (such as pi, e, etc.) • Expressions can be any combination of input parameters and/or constant values © 2006 ANSYS, Inc. All rights reserved. 124 ANSYS, Inc. Prop
Slide 125: Parameter Manager Expressions
Parameter Manager Expressions • Output parameters cannot be used within expressions • DX Derived Parameter editor can use Output parameters • Certain variable names are also restricted. The following expression ids cannot be used within the Parameter Manager: X, x, Y, y, Z, z, and time © 2006 ANSYS,
Slide 126: Running Simulation from Excel
Parameter Manager Running Simulation from Excel © 2006 ANSYS, Inc. All rights reserved. 126 ANSYS, Inc. Proprietary
Slide 127: Partner Application Example
Partner Application Example OPTIMIZER 2Var Tool: Provides the only Design of Experiments (DoE), GLOBAL optimization available for both Excel and ANSYS WBDB Installs seamlessly under Excel’s Tools Menu and ANSYS WBDB Automatically assigns and updates WBDB Parameter Attributes Simple, Single Button Op
Slide 128: DesignXplorer
DesignXplorer © 2006 ANSYS, Inc. All rights reserved. 128 ANSYS, Inc. Proprietary
Slide 129: CFX Support
DesignXplorer CFX Support • Identify parameters for ‘exposure’ in DX • Geometry dimensions • Physics inputs • Response parameters • CFX Expressions used to define ‘parameters’ • Define ‘input’ parameters in Pre • Run solver • Define ‘response’ parameters in Post • Set up a DX Study • Run DesignXplor
Slide 130: Additional Sampling methods
DesignXplorer • Additional Sampling methods – Optimal Space Filling Design (New at 11) – Central Composite Design © 2006 ANSYS, Inc. All rights reserved. 130 ANSYS, Inc. Proprietary
Slide 131: New Meta Models
DesignXplorer • New Meta Models – Kriging (New at 11) – Non Parametric Regression (New at 11) – Neural Network (New at 11, Beta) – 2nd Order Polynomial © 2006 ANSYS, Inc. All rights reserved. 131 ANSYS, Inc. Proprietary
Slide 132: New Meta Models
DesignXplorer • New Meta Models From this? To this!!!! © 2006 ANSYS, Inc. All rights reserved. 132 ANSYS, Inc. Proprietary
Slide 133: Ability to refit the data
DesignXplorer • Ability to refit the data From this? To this!!!! © 2006 ANSYS, Inc. All rights reserved. 133 ANSYS, Inc. Proprietary
Slide 134: Ability to add additional data points
DesignXplorer • Ability to add additional data points From this - Peak 1.84? To this - Peak 2.01!!!! Real Maximum is 2.0 © 2006 ANSYS, Inc. All rights reserved. 134 ANSYS, Inc. Proprietary
Slide 135: Weighted Latin Hypercube
DesignXplorer • Weighted Latin Hypercube • From this? To this!!!! © 2006 ANSYS, Inc. All rights reserved. 135 ANSYS, Inc. Proprietary
Slide 136: Excel Import
DesignXplorer • Excel Import – Need to have one initial solve point © 2006 ANSYS, Inc. All rights reserved. 136 ANSYS, Inc. Proprietary
Slide 137: Excel Import
DesignXplorer • Excel Import – Voila! Data is now in DesignXplorer © 2006 ANSYS, Inc. All rights reserved. 137 ANSYS, Inc. Proprietary
Slide 138: Excel Export
DesignXplorer • Excel Export – Invoke the Export Wizard – Choose the file and a name for the sheet – Export in row major or column major format © 2006 ANSYS, Inc. All rights reserved. 138 ANSYS, Inc. Proprietary
Slide 139: Excel Export
DesignXplorer • Excel Export – Voila! DesignXplorer data is now in Excel © 2006 ANSYS, Inc. All rights reserved. 139 ANSYS, Inc. Proprietary
Slide 140: FE Modeler – Compliments DX
FE Modeler – Compliments DX • ABAQUS Support – Three dimensional springs are now supported – The ABAQUS property keyword *DASHPOT is now supported – FE Modeler now recognizes ABAQUS gasket elements – Element and node parameters are now supported for the ABAQUS general keyword *SURFACE • NASTRAN Bulk
Slide 141: FE Modeler – Geometry Creation from FEA
FE Modeler – Compliments DX Geometry Creation from FEA! Design Simulation Results Initial Mesh Initial Configuration in FE Modeler © 2006 ANSYS, Inc. All rights reserved. 141 ANSYS, Inc. Proprietary
Slide 142: Mesh Morphing Geometric Parameters
DesignXplorer Mesh Morhping Geometric Parameters - Parametric Stress Variations!! Thick ness increase Diameter decrease © 2006 ANSYS, Inc. All rights reserved. 142 ANSYS, Inc. Proprietary
Slide 143: Mesh Morphing
DesignXplorer Mesh Morphing • 11.0 Transformations – Face Translation – Face Offset – Edge Translation – Edge Offset • Transformation Power in the real world – Face Offset of a cylindrical surface is equivalent to a cylindrical translation – Extending edges of a fillet in opposite directions mimics
Slide 144: CAD Support
CAD Support © 2006 ANSYS, Inc. All rights reserved. 144 ANSYS, Inc. Proprietary
Slide 145: Workbench CAD Support
Workbench CAD Support • New Parametric Geometry Interface for CATIA V5 – CADNexus/CAPRI CAE Gateway for CATIA V5 • Windows 32 bit – R14, R15, R16 • Windows 64 bit – R16 – Buy license from ANSYS – Download CADNexus/CAPRI CAE Gateway for CATIA V5 from CADNexus website: – http://www.cadnexus.com/ – Onl
Slide 146: Workbench CAD Support
Workbench CAD Support • ACIS 16* • Pro/Engineer Wildfire 3* • Parasolid 18.0* • Pro/Engineer Wildfire 2* • CATIA V4 • Unigraphics NX 4.0* • CATIA V5 - R16 • IGES 4.0, 5.2, 5.3 • Unigraphics NX 3.0 • STEP AP203, AP214 • Mechanical DeskTop 2006 • SolidEdge Version 18.0 • Mechanical DeskTop 2007** • So
Slide 147: Explicit Solutions
Explicit Solutions © 2006 ANSYS, Inc. All rights reserved. 147 ANSYS, Inc. Proprietary
Slide 148: Explicit Dynamics Agenda
Explicit Dynamics Agenda • ANSYS/LS-DYNA • AUTODYN – Focus Areas – Application Examples – Technology Available • ANSYS AUTODYN® 11.0 – Workbench – Application data sharing – Parametric Design Studies © 2006 ANSYS, Inc. All rights reserved. 148 ANSYS, Inc. Proprietary
Slide 149: Explicit Dynamics Solutions
Explicit Dynamics Solutions • ANSYS LS-DYNA – LSTC Solver technology – Solid/Solid Contact Application Focus – Long-term partnership • ANSYS AUTODYN – Century Dynamics (ANSYS proprietary) – Defense, Aerospace, Homeland Security Focus • Complementary Products with Different Application Areas © 2006 A
Slide 150: AUTODYN Focus Areas
Explicit Dynamics AUTODYN Focus Areas • Transient dynamic wave propagation – Gases, Liquids, Solids + their Interaction (Explicit FSI) • Non-linear – Material behaviour – Structural behaviour – Contact/Interaction – Fluid Structure Interaction • Large/extreme deformation • Large/extreme strain and f
Slide 151: AUTODYN Applications
Explicit Dynamics AUTODYN Applications • Typical Applications – Impact – Ballistic Protection • Low => Hypervelocity – Energetic Systems – Blast Propagation – Blast Effects on Structures – Materials Research © 2006 ANSYS, Inc. All rights reserved. 151 ANSYS, Inc. Proprietary
Slide 152: AUTODYN Technology
Explicit Dynamics AUTODYN Technology Bird strike (SPH, Shells) • Development began 1985 • Solvers/Elements – FE and FV(VOF) – Mesh Free (SPH) • Contact – Lagrangian Contact/Impact • Fluid Structure Interaction (FSI) – FE FV Coupling – FE SPH Coupling • Non-linear material modelling • Parallel Simple
Slide 153: AUTODYN Methods
Explicit Dynamics AUTODYN Methods FE FV(VOF) ALE SPH © 2006 ANSYS, Inc. All rights reserved. 153 ANSYS, Inc. Proprietary
Slide 154: AUTODYN Solver Coupling
Explicit Dynamics AUTODYN Solver Coupling • Coupling Application – Under Water Explosion – FSI, Euler-Lagrange – Water and Air Euler – Structure Shells • Deformable / Rigid © 2006 ANSYS, Inc. All rights reserved. 154 ANSYS, Inc. Proprietary
Slide 155: AUTODYN Solver Coupling
Explicit Dynamics AUTODYN Solver Coupling • Coupling Application – Blast and Fragment Loading on Deformable Structures – Vehicle • Shells, Beams, Solids – Mine • Euler – Soil • Solids + Eroded Nodes © 2006 ANSYS, Inc. All rights reserved. 155 ANSYS, Inc. Proprietary
Slide 156: AUTODYN Parallel Processing
Explicit Dynamics AUTODYN Parallel Processing • 3-D simulations run in parallel – Cluster of PC’s running Windows – Linux/Unix – MPI, PVM • Manual and automatic domain decomposition • Highly scalable • Includes Contact and Coupling (FSI) 70 60 50 Seconds Sec/cycle 40 Speed up factor 30 Theoretical 2
Slide 157: AUTODYN 11.0 Development
Explicit Dynamics AUTODYN 11.0 Development • NEW - Workbench based Explicit Dynamics option • Data sharing with other Workbench Applications – DesignModeler – Meshing • Links to Geometry: – CAD based – DesignModeler created • Persistent Parametric Model for: – Mesh density/quality studies – Design a
Slide 158: AUTODYN in Workbench
Explicit Dynamics AUTODYN in Workbench © 2006 ANSYS, Inc. All rights reserved. 158 ANSYS, Inc. Proprietary
Slide 159: AUTODYN in Workbench
Explicit Dynamics AUTODYN in Workbench – Interfaces to CAD models – Powerful meshing tools • Tailored for Explicit • Tet/Hex, Shell, Beam • Mesh Sizing and refinement controls – Persistent link to AUTODYN • Updates to geometry/mesh feed directly back into AUTODYN model • Parametric modifications eas
Slide 160: AUTODYN Parametric Studies
Explicit Dynamics AUTODYN Parametric Studies DesignModeler => Meshing => AUTODYN Generate Mesh (Retain all previous settings) Modify Geometry © 2006 ANSYS, Inc. All rights reserved. 160 ANSYS, Inc. Proprietary
Slide 161: AUTODYN 11.0 Workbench Example
Explicit Dynamics AUTODYN 11.0 Workbench Example • Example:: Sports equipment design © 2006 ANSYS, Inc. All rights reserved. 161 ANSYS, Inc. Proprietary
Slide 162: High Performance Computing
High Performance Computing © 2006 ANSYS, Inc. All rights reserved. 162 ANSYS, Inc. Proprietary
Slide 163: New Modal Solver
SMP ANSYS Enhancements New Modal Solver • New modal solver: LANPCG – Block Lanczos with PCG solver (LANPCG) – Replaces the compute cost, file size and I/O requirements of matrix factorization with iterative PCG solver costs – Very robust due to use of Block Lanczos algorithm and our PCG solver – Eff
Slide 164: LANPCG performance
SMP ANSYS Enhancements LANPCG performance LANB vs. LANPCG (10 Modes) 35 Elapsed Time (hr) 30 25 20 LANB 15 LANPCG 10 5 0 0.5 1 2 5 Million DOFs © 2006 ANSYS, Inc. All rights reserved. 164 ANSYS, Inc. Proprietary
Slide 165: LANPCG performance
SMP ANSYS Enhancements LANPCG performance Number of Parts 75 SGI Altix server using six Contact Pairs 291 1.5 GHz Itanium-2 Nodes 8,080,601 processors on Linux 64-bit CONTACT Elements 382,492 OS (SUSE LINUX SOLID186/187 Elements 5,438,005 CEs 0 Enterprise Server 9) with No. of Equations (dofs) 24,24
Slide 166: LANPCG performance
SMP ANSYS Enhancements LANPCG performance LANPCG eigensolver statistics (PCS file) DETAILS OF PCG SOLVER SOLUTION TIME(secs) Cpu Wall Preconditioner Factoring 183.13 183.20 Eigen Solve 63710.33 65152.46 Eigen Solve Overhead 4379.04 4580.78 Compute MQ 3818.19 3897.96 Reorthogonalization 3726.93 3860.
Slide 167: PCG Solver Enhancements
SMP ANSYS Enhancements PCG Solver Enhancements • Ability to use a single precision direct solver for the CG calculation – Allows PCG solver to be used on very ill- conditioned problems (models containing elongated elements (i.e., elements with high aspect ratios) and models containing contact elemen
Slide 168: SMP ANSYS Enhancements
SMP ANSYS Enhancements • Sparse Solver Enhancements – Improve the robustness and memory savings in sparse equation ordering – Improve the robustness in 64 bit version of sparse solver which allows memory usage more than 16 GB (use –LM option when launching a job) – Automatically use optimal I/O buff
Slide 169: New Distributed LANPCG
Distributed ANSYS (DANSYS) New Distributed LANPCG • New Distributed modal eigensolver, LANPCG – It supports PCGOPT,14 which uses PCG iterative solver as kernel in the modal solver – It supports PCGOPT,5 which uses DSparse solver and is similar to ModOpt,LANB eigensolver but is distributed paralleliz
Slide 170: LANPCG Performance
Distributed ANSYS (DANSYS) LANPCG Performance SGI Altix, 8-CPU – 64 GB Memory 112 MDOF LANPCG analysis, 10 modes 100.0 6.00 80.0 5.00 Tim e (hours) 4.00 Speedup 60.0 3.00 40.0 2.00 20.0 1.00 0.0 0.00 1 2 4 8 Number of Processors PCG Lanczos breaks barrier of matrix factorization size, cost and I/O f
Slide 171: Scalability Enhancements
Distributed ANSYS (DANSYS) Scalability Enhancements • Load balance (improve domain decomposer) – Distribute computational work evenly to each processor • Reduction of interface between domains – Create minimum interface areas: minimum inter-communications among processors • Use DSparse solver as a k
Slide 172: Improved Load Balancing
Distributed ANSYS (DANSYS) Improved Load Balancing Axle Model: Decomposer Enhancements 5.00 4.50 4.00 3.50 Speed Up Factor 3.00 10.0 Speed Up 2.50 10.0 SP1 Speed Up 2.00 11.0 Speed Up 1.50 1.00 0.50 0.00 PCG -1 DPCG -2 DPCG -4 DPCG -6 DPCG -8 Num ber of CPUs © 2006 ANSYS, Inc. All rights reserved. 1
Slide 173: DSparse Solver Enhancements
Distributed ANSYS (DANSYS) DSparse Solver Enhancements • Improved Scalability of DSparse solver • Reduced memory usage in DSparse solver by at least 30% • Support for complex number calculations added • DSparse solver can now solver very large problems (> 3 MDOF) – DSparse solver is now fully 64 bit
Slide 174: New Hardware and OS's
Distributed ANSYS (DANSYS) New Hardware and OS’s • DANSYS supports Windows x64 platform using MPICH 2.0 for the MPI – Note: MPICH2 middleware which is better than MPICH which was used in DANSYS 10.0 for 32 bit Windows • DANSYS supports Microsoft Windows Compute Cluster Server 2003 (CCS) using MS MPI
Slide 175: New Capabilities
Distributed ANSYS (DANSYS) New Capabilities • Modal analysis (by using new command field MODOPT,LANPCG) • Single-frame and multi-frame restarts • Initial condition (IC command) • Initial stress (ISTRESS, ISFILE commands) • Supports the new Structural stabilization 22x electric-structural coupled fie
Slide 176: VT Accelerator: Optimization goes Transient!
VT Accelerator Optimization goes Transient! • Variational Technology (VT) expanded to speed up: – Nonlinear static and transient structural solutions not involving contact or plasticity – Nonlinear static and transient thermal analyses • VT Accelerator makes solutions 2x to 5x faster for initial sol
Slide 177: VT Accelerator Example
VT Accelerator Example • 288,727 elements 1400.00 • 456,635 nodes 1200.00 1000.00 • B.C’s: convections with Initial VT (full checks) Temperature temp and time 800.00 Quasi ICCG Full PCG - no VT dependency 600.00 400.00 200.00 0.00 0 200 400 600 800 1000 Physical time (s) All results are in good agre
Slide 178: VT Accelerator Example Parameters
VT Accelerator Example Parameters Film Coefficient vs Time • B.C’s defined as temperature 300 and time dependent film 250 coefficients & bulk temperature 200 Initial • Variations on film coefficients 150 Parametric 1 Parametric 2 around top of the blade: 100 Parametric 3 – Parametric change 1: 50 sc
Slide 179: VT Accelerator Example Solutions
VT Accelerator Example Solutions Run without VT Run with VT 156 Cumulative iterations 30 Cumulative iterations Elapsed time = 2750 s Elapsed time = 775 s Florida Turbine Technologies © 2006 ANSYS, Inc. All rights reserved. 179 ANSYS, Inc. Proprietary
Slide 180: VT Accelerator Example Performance
VT Accelerator Example Performance CPU Ratio (vs Full PCG) 12 10.67 11 10 9.53 8.59 9 8 7 6 5 4 3 2.07 2 1.03 1.00 1 0 CG n G ve ve e tio C olv l ol IC ll P so lu es es So Re si Fu R R ua VT T VT VT Q V l tia d t d 1s 2n 3r i In Florida Turbine Technologies © 2006 ANSYS, Inc. All rights reserved. 18
Slide 181: Questions?
Questions? © 2006 ANSYS, Inc. All rights reserved. 181 ANSYS, Inc. Proprietary