Wolfspeed, Inc. · NYSE:WOLF

Wolfspeed — Technical Presentation (April 2022)

7 slides from Wolfspeed's technical presentation, April 2022

  1. Slide 1: Silicon Carbide TOLL MOSFETs Enable High Efficiency and High Power Density in 3.6kW Totem-Pole PFC

    Silicon Carbide TOLL MOSFETs Enable High Efficiency and High Power Density in 3.6kW Totem-Pole PFC WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2021 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.

  2. Slide 2: Target PFC Topologies of Server SMPS

    TARGET PFC TOPOLOGIES OF SERVER SMPS Traditional PFC Boost Bridgeless Totem-Pole PFC C3M 650V Silicon Carbide MOSFET • Appropriate for low power server SMPS targeting lower • For HF leg, Si-based MOSFET cannot be used due to slow 80 PLUS efficiency standards (e.g. Silver, Gold) reverse recovery of b

  3. Slide 3: System Level Thermal Performance of TOLL vs TO-263-7L Package

    SYSTEM LEVEL THERMAL PERFORMANCE OF TOLL VS TO-263-7L PACKAGE Power – 28 W Thermal Performance Convection 5000 W/m2K TOLL Package require less thermal management, granting cost, space, and weight benefits to the application. 3 3

  4. Slide 4: Wolfspeed 3.6kW Totem-Pole PFC with Silicon Carbide

    WOLFSPEED 3.6KW TOTEM-POLE PFC WITH SILICON CARBIDE Parameter Value Notes 180-265 VAC Power derating Input Voltage VIN RMS, 230V needed for low nominal line Output Voltage 420 VDC max. VOUT Output Power POUT 3.6 kW max. Control card Daughter card with SiC Switching with TI DSP MOSFETs C3M0045065L Fr

  5. Slide 5: Test Data

    TEST DATA 100 98 99.4 96 180Vac Input 99.2 230Vac Input PF(%) 94 265Vac Input 99 98.8 92 Efficiency(%) 98.6 90 98.4 88 180Vac Input 0 1000 2000 3000 4000 98.2 230Vac Input Output Power (W) 98 Switching frequency = 60kHz 97.8 16 0 1000 2000 3000 4000 14 Output Power (W) 12 180Vac Input 10 230Vac Inpu

  6. Slide 6: Thermal Result (adhesive as TIM)

    THERMAL RESULT (adhesive as TIM) Calculated Measured Calculated Max. Junction Derating Comments Power loss Case Temp Junction Temperature Requirement (Watts) (℃) Temp (℃) (℃) (℃) 180Vac Input 400Vdc output 3600W High side 13.38 82.5 94.27 175 135 Pass MOSFET Low side 13.38 85 96.77 175 135 Pass MOSF

  7. Slide 7: Summary

    SUMMARY  80 Plus Platinum/Lot 9 efficiency standards require new topologies and advanced power devices to be used for server and data center power supplies  A 3.6kW high-efficiency high-power-density Totem-pole PFC with 650V Wolfspeed TOLL package SiC power devices designed and tested to meet 80 P

Wolfspeed — Technical Presentation (April 2022) on 6ix