HMS Networks AB · OMXSTO:HMS

HMS Networks AB — Red Lion Controls — Technical Presentation (March 2017)

63 slides from HMS Networks AB's technical presentation, March 2017

  1. Slide 1: Welcome. New Products Briefing March 2017

    WELCOME. the webcast will begin shortly New Products Briefing March 2017 NOTE: Due to bandwidth-induced audio problems, the audio portion is via phone only. To connect via phone, select the audio option at the top of your monitor, and follow the dial-in instructions.

  2. Slide 2: New Products Briefing

    New Products Briefing Graphite® Edge Controller Paul Bunnell, Automation Director of Product Management Crimson® 3 Driver Updates PAX2C PID Controllers Jeff Thornton, Automation Product Management © Red Lion Controls Inc. 1

  3. Slide 3: Graphite Edge Controller

    Graphite Edge Controller LAUNCH: March 21, 2017 © Red Lion Controls Inc. 2

  4. Slide 4: Agenda

    Agenda  Introduction  Features & Benefits – Hardware – Software  Model Numbers  Where to Sell Graphite Edge Controller Launch Tuesday, March 21, 2017 © Red Lion Controls Inc. 3

  5. Slide 5: Graphite Edge Controller

    Graphite Edge Controller  When: March 21, 2017  What: Highly scalable, compact controller that easily scales from one to twenty five I/O module slots ideally suited to meet customers’ exact input and output needs for rugged environmental applications Graphite Edge Controller Launch Tuesday, March

  6. Slide 6: Graphite Edge Controller

    Graphite Edge Controller  Rugged industrial controller running an industry-standard IEC 61131 control engine for doing application logic control much like PLCs or RTUs Inputs  Offers all the networking, protocol conversion, industrial drivers, data logging and web server capabilities just like oth

  7. Slide 7: Features & Benefits

    Features & Benefits © Red Lion Controls Inc. 6

  8. Slide 8: Graphite Edge Controller

    Graphite Edge Controller  Rugged controller with built-in Crimson® Control engine  Configured using Crimson 3.0 software with Crimson Control functionality  Works with all existing Graphite I/O and communications plug-in modules  -40° to 70°C wide operating temperature  Communicates with over 3

  9. Slide 9: Graphite Edge Controller

    Graphite Edge Controller Built-in slot (1) RS232 & (2) RS485Ports for Graphite USB modules Device Expansion Port USB to add more Host I/O modules via Expansion Racks Ethernet Easy DIN rail mounting Ports and removal or SD Card panel mounting Slot 10-30VDC Power © Red Lion Controls Inc. 8

  10. Slide 10: Graphite Edge Controller

    Graphite Edge Controller Mix and match Graphite modules as needed © Red Lion Controls Inc. 9

  11. Slide 11: Graphite Expansion Racks

    Graphite Expansion Racks  Easily expands the number of Graphite modules on Edge Controllers  Up to 4 standard racks can be directly connected to the Edge Controller for a total of 13 I/O module slots  An additional 4 expansion racks can be tethered for a total of 12 more I/O module slots  Suppor

  12. Slide 12: Graphite Expansion Racks

    Graphite Expansion Racks USB connector 3 slots for Graphite modules Mounting hole 10-30VDC power for racks and Easy DIN rail mounting Graphite HMIs and removal or Controllers © Red Lion Controls Inc. 11

  13. Slide 13: Graphite Expansion Racks

    Graphite Expansion Racks Up to 13 Graphite modules can be locally connected 12 more Graphite modules can be tethered © Red Lion Controls Inc. Tethered Graphite modules require one (1) wide rack 12

  14. Slide 14: Expansion Rack Configuration

    Expansion Rack Configuration  Expansion Racks connected directly to Graphite Edge show up in I/O Module area  Expansion Racks tethered to Graphite Edge Controller show up below in “Tethered Rack” area – Add rack in Crimson Navigation Pane  Click on slot number and pick appropriate module to add t

  15. Slide 15: Crimson Control

    Crimson Control  Crimson Navigation Pane category: Control  Shown when choosing a Graphite Edge or Core Controller or any Graphite HMI © Red Lion Controls Inc. 14

  16. Slide 16: Crimson Control

    Crimson Control  Program Code Editing Pane opens in central portion of the window after clicking on Control bar  Program Code Editing Pane is used to develop logic control code using any one of four IEC 61131 programming languages © Red Lion Controls Inc. 15

  17. Slide 17: IEC 61131 Programming Languages

    IEC 61131 Programming Languages  Ladder Logic  Function Block © Red Lion Controls Inc. 16

  18. Slide 18: IEC 61131 Programming Languages

    IEC 61131 Programming Languages  Structured Text  Instruction List © Red Lion Controls Inc. 17

  19. Slide 19: Crimson Control

    Crimson Control  Top section of Navigation Pane for Control category shows how control projects are developed  Projects can contain multiple programs as needed for each application  Each program can be any one of four IEC 61131 language types  Projects and programs have control variables that ar

  20. Slide 20: Crimson Control

    Crimson Control  Top section of Resource Pane for Control category shows the list of function blocks available  Show function block help info by simply right-clicking on any item in the tree © Red Lion Controls Inc. 19

  21. Slide 21: Crimson Control

    Crimson Control  Crimson Control Reference Manual added to Crimson 3.0 software  Includes details on how to use each function block in the four IEC 61131 programming languages © Red Lion Controls Inc. 20

  22. Slide 22: Crimson Control

    Crimson Control  Integrated into Crimson 3.0 Software – No need for add-on or special/extra software reduces complexity  Available for download from the Red Lion website – Start developing projects today  Industry-standard IEC 61131 programming languages – No need to learn special programming lan

  23. Slide 23: Model Numbers

    Model Numbers © Red Lion Controls Inc. 22

  24. Slide 24: Model Numbers

    Model Numbers Graphite Edge Controller MODEL NUMBER DESCRIPTION GRAC0001 Graphite Edge Controller Graphite Expansion Racks MODEL NUMBER DESCRIPTION GEXRACK1 Graphite Wide Expansion Rack for Modules GEXRACK2 Graphite Standard Rack for Modules CBLUSBM0 USB Tethering Cable, 0.5 m Metal Jacketed CBLUSBM

  25. Slide 25: Where to Sell

    Where to Sell © Red Lion Controls Inc. 24

  26. Slide 26: Where to Sell

    Where to Sell  Graphite HMI customers who are considering third-party controllers – They already know Crimson software – Need for only one software package reduces cost and complexity – Easily deploy Crimson software on as many computers as needed without costly licenses – One stop for technical su

  27. Slide 27: Where to Sell

    Where to Sell  Customers looking for industry-standard IEC 61131 programming languages – Eliminates the need to learn special codes and addressing schemes  Applications in harsh environments – Graphite Edge Controller has wide temperature specs that may support unventilated or smaller enclosures,

  28. Slide 28: Where to Sell

    Where to Sell  Applications – Factory Automation - Mixers, ovens, dryers, boilers, plastics and test equipment – Oil & Gas - Tank batteries, salt water disposal, separators, and pipeline monitoring – Power and Utilities - Solar or wind farm balance of plant, gas compressors and sub-station monitori

  29. Slide 29: Launch Information – March 2017

    Launch Information – March 2017  Promotional Materials www.redlion.net/GraphiteEdge – Press Release – Data Sheets – Launch Email  Distributor Portal – Sales Primer – Product Briefing – Presentation – High-Res images © Red Lion Controls Inc. 29

  30. Slide 30: Crimson 3 Driver Updates

    Crimson® 3 Driver Updates © Red Lion Controls Inc. 30

  31. Slide 31: DNP3

    DNP3 DNP3 DRIVER  Available in Crimson® 3.0 software today  Works with: – Graphite® HMIs, Edge and Core Controllers – Future Crimson 3.0 release to support DSP ZR model  Supports DNP3 Master and Slave Modes in both Serial RS232/485 or Ethernet  Markets include: Utility, Water/Waste Water, Oil &

  32. Slide 32: DNP3

    DNP3 DNP3 DRIVER Use Crimson® 3.0 Driver Pick List for Ethernet or Serial © Red Lion Controls Inc. 32

  33. Slide 33: Other Drivers

    Other Drivers OTHER DRIVERS  Emerson Process Micro Motion Coriolis Meter  Yaskawa MP3000iec PLC © Red Lion Controls Inc. 33

  34. Slide 34: PAX2C Advanced PID Controller

    PAX2C Advanced PID Controller Process and Temperature PID Control © Red Lion Controls Inc. 34

  35. Slide 35: What is PID Control?

    What is PID Control?  The best example of PID Control is to think of the cruise control in your car  The goal is to maintain a constant speed regardless of conditions © Red Lion Controls Inc. 35

  36. Slide 36: PID Control

    PID Control  PID Control is similar except it maintains a constant process flow or temperature exactly the same way Temperature Industrial sensor or heater process signal PID Controller © Red Lion Controls Inc. 36

  37. Slide 37: PAX2C Product Highlights

    PAX2C Product Highlights  Process and Temperature PID Control  Built-in USB Programming Port  Crimson 2 Configuration  Universal Input and Power Supply  Field Installable Option Cards  FlexBus/FlexCards  Ramp/Soak Capability  Vertical or Horizontal Models © Red Lion Controls Inc. 37

  38. Slide 38: Built-in Configuration Port

    Built-in Configuration Port  No conversion modules required, a simple mini USB cable connected to a laptop © Red Lion Controls Inc. 38

  39. Slide 39: Crimson 2 Software

    Crimson 2 Software  Configuration made easy  Select the item to program  Simple drop down menus  Effortless check box selections  Easy numeric entries  Save programming for future use  And best of all it is included with the product cost © Red Lion Controls Inc. 39

  40. Slide 40: PAX2C Configuration

    PAX2C Configuration  Select PX2C with FlexBus © Red Lion Controls Inc. 40

  41. Slide 41: Universal Capability

    Universal Capability  Universal Power - 40 to 250 VAC - 21.6 to 250 VDC - Polarity does not matter  Universal Input - Process Signals (0 to 20 mA/4 to 20 mA) - Temperature (Thermocouples, RTDs) - DC Current and Voltage - Resistance Flow Thermocouple RTD Meters s s © Red Lion Controls Inc. 41

  42. Slide 42: Input Configuration

    Input Configuration  Select the terminal block to configure input © Red Lion Controls Inc. 42

  43. Slide 43: Input Configuration

    Input Configuration  Select the sensor and other inputs © Red Lion Controls Inc. 43

  44. Slide 44: PAX2C Plug-in Option Cards

    PAX2C Plug-in Option Cards  Simple Plug and Play, Field Installable Analog Output Card • 4 to 20 mA and 0 to 10 VDC Output Cards Communication • Dual Form C Relays Cards • Quad Form A Relays • Modbus • Quad Form C Relays (standard) • Quad Sourcing • RS232 • Quad Sinking • RS485 • Triac Output • Dev

  45. Slide 45: Option Card Configuration

    Option Card Configuration  Select the appropriate card slot, then select the card type © Red Lion Controls Inc. 45

  46. Slide 46: Soft Alarms

    16 Soft Alarms What is a soft alarm? A condition (alarm) within the controller that allows an action to be taken. Actions could be as simple as a change in display color to direct mapping to a hard output for external control. Control outputs Currently the controller supports up to 4 hard outputs fo

  47. Slide 47: FlexBus and Flex Cards

    FlexBus and Flex Cards FlexBus is a parallel bus of connectors that receive FlexCards FlexBus FlexCards are used for controller connectors applications to add additional capabilities like;  Heater Current Monitor  Process Input Remote Setpoint 2nd Analog Input 2nd PID Controller © Red Lion Control

  48. Slide 48: FlexBus and FlexCards

    FlexBus and FlexCards FlexBus Connectors What products feature FlexBus?  The PAX2C is the only product that currently offers FlexBus and FlexCards. Combining this advantage with the PAX2C capabilities provides the market with a controller which has never been seen before. © Red Lion Controls Inc. 4

  49. Slide 49: PID/2nd Analog Input FlexCard

    PID/2nd Analog Input FlexCard + OR What is the advantage of 2 PID controllers in one unit?  Saves the customer panel space and installation time. In addition, the customer can leverage all the features in the PAX2C like Graphic Bar Graphs, Color Changing Displays, 16 Alarms and the universal PID Co

  50. Slide 50: Heater Current Monitor FlexCard

    Heater Current Monitor FlexCard What is Heater Current Monitor?  The current of the heater is measured through a current transducer. The transducer output is connected to the HCM FlexCard inside the Controller. A display and/or alarm can be assigned to monitor the “health” of the heater and heater

  51. Slide 51: 2nd Analog Input FlexCard

    2nd Analog Input FlexCard  2nd PID Controller Set-up © Red Lion Controls Inc. 51

  52. Slide 52: Ramp/Soak Capability

    Ramp/Soak Capability  Ramp/Soak or Profile – A Profile can contain 1 to 20 step changes – A PAX2C can hold up to 16 Profiles © Red Lion Controls Inc. 52

  53. Slide 53: Ramp/Soak Programming

    Ramp/Soak Programming  Enter your Profile setting © Red Lion Controls Inc. 53

  54. Slide 54: Display Capabilities

    Display Capabilities  Dual line display, allows two variables to be seen at one time  Tri-color display, programmable for red, orange and green  Display color change, provides visual indication of changing conditions  Custom units and universal annunciators allow the display to be designed for y

  55. Slide 55: PAX2C Models

    PAX2C Models  1/8 DIN packaging with choice of orientation Horizontal Vertical Orderable Part Numbers PX2CVR00 PX2CHZ00 © Red Lion Controls Inc. 55

  56. Slide 56: Where to Sell

    Where to Sell Temperature is the most monitored and controlled variable in the world, bar none. © Red Lion Controls Inc. 56

  57. Slide 57: Heat Treating & Industrial Ovens

    Heat Treating & Industrial Ovens  Equipment Examples  Example Applications – Rubber curing ovens – Automotive – Industrial furnaces - Parts manufacturing – Metal annealing - Interior lamination – Brazing – Aerospace – Reflow equipment – Forging – Semiconductor manufacturing – Solar panel manufactu

  58. Slide 58: Plastics

    Plastics  Example Equipment  Functional drivers – Portable chillers – Plastic production relies on – Hoppers precisely-monitored temperatures at various points – Dryers in the process – Molding equipment – In extruding equipment, – Extruders temperature controllers are used to monitor and control

  59. Slide 59: Packaging

    Packaging  Functional Examples – Seal bars – Glue applicators – Hot melt functions – Shrink wrap tunnels – Label applicators Any features in packaging equipment that must operate at designated temperatures and process time lengths are a potential target for ramp/soak. © Red Lion Controls Inc. 59

  60. Slide 60: Life Science and Healthcare

    Life Science and Healthcare  Equipment Examples  Typical Applications – Autoclaves – Production of glass syringes – Incubators – Sterilization of glass bottles – Refrigeration – Test equipment © Red Lion Controls Inc. 60

  61. Slide 61: PAX2C PID Controller Summary

    PAX®2C PID Controller Summary Universal PID Controller Our premium PID Controller offers many universal capabilities as well as plug-in option cards providing the most flexible PID controller available. The unit includes On/Off, Full PID Control and Ramp/Soak functionality. Users can select a horizo

  62. Slide 62: The Customer’s Choice

    The Customer’s Choice  Stock all the variations… OR …one controller and a handful of cards © Red Lion Controls Inc. 62

  63. Slide 63: Thank You. Questions?

    Thank You. Questions? For more information 20 Willow Springs Circle | York, PA 17406 USA +1 (717) 767-6511 | www.redlion.net | info@redlion.net

Red Lion Controls — Technical Presentation (March 2017) on 6ix