Materialise NV · EURONEXT:MTLS

Materialise NV — Technical Presentation (October 2012)

58 slides from Materialise NV's technical presentation, October 2012

  1. Slide 1: Materialise: innovators you can count on

    Materialise\ innovatorsyou can count on 4.

  2. Slide 2: Materialise product & services portfolio

    Materialise product & services portfolio Expertise throughout the entire AM process Post 2D to 3D Engineering AM/RP Quality Data AM process on a technology level & design preparation Production control processing & shipping FEA, windtunnels, Magics 3-maticengineering, ... Build Mimics Magics Mimics

  3. Slide 3: Materialise product & services portfolio

    Materialise product & services portfolio Expertise throughout the entire AM process Post 2D to 3D Research Quality AM preparation Production processing & Data & design control shipping FEA, windtunnels, Magics 3-maticengineering, ... Build Mimics Magics Mimics AutoFab R&D e-Stage processor 3-matic R

  4. Slide 4: Magics 17

    Magics17 Now multi-core for the fastest Magics experience yet Dr. Gert Claes Product Manager Magics

  5. Slide 5: Dear customer

    Dear customer, Thank you for your interest in Magics17. In this release we took many of the suggestions of our customers into account. Last year we got a lot of feedback from our beta user survey. Main priorities for our users was to focus on speed and usability. In this new release we have tried to

  6. Slide 6: Magics 17 - Introduction

    Magics17 - Introduction Magics17 functionality spread: 20% New concepts 40% Usability 40% Multicore 6

  7. Slide 7: Fix analysis benchmarks

    Fix analysis benchmarks (Magics 16 vs. 17)  Standard fixing analysis faster* (no overlapping and intersecting triangles detection)  Full fixing analysis faster*  Inverted normals analysys: faster*  Near bad edges analysis: faster*  Planar holes analysis: faster*  Overlapping triangle analysis:

  8. Slide 8: Standard operations benchmarks

    Standard operations benchmarks (Magics 16 vs. 17)  Triangle reduction: faster*  Cone generation: faster*  Unify: faster*  Boolean substract: faster*  Boolean intersect: faster*  Boolean unite: faster*  Surface to solid (offset): faster*  Collision detection: faster*  Duplicate: faster* * Th

  9. Slide 9: Positioning

    Positioning  Improved interactive translate and rotate  Change selection during operation  Switch between parts  Select multiple parts at once  Added: Interactive translate about line  Use any line on any part as translation reference  Added: Interactive rotate around line  Specify any line

  10. Slide 10: Treat as 1 hole checkbox

    Treat as 1 hole checkbox Planar hole fixing has now the option “treat as 1 hole” in fix wizard and fix pages Without “treat as 1 hole” With “treat as 1 hole”

  11. Slide 11: Follow advice button in Fix wizard

    Follow advice button in Fix wizard  Fix your parts clicking only one button which will guide you through all fixing steps  Replaces “Go to Adviced step” button

  12. Slide 12: Renaming of virtual copies

    Renaming of virtual copies  Create a unique name for a ‘virtual’ copy without renaming all unique copies  Track original copies with new ‘Copy of’ column 12

  13. Slide 13: Customizable part renaming after operations

    Customizable part renaming after operations Have more control during your data preparation  Choose one of existing templates  Create your own custom template

  14. Slide 14: Indicate view orientation

    Indicate view orientation  New function in the view toolbar:  Click on a triangle and the view will be oriented perpendicular to the selected triangle  Very useful for  Labeling  Cutting  Perforations

  15. Slide 15: Copy no-build zones

    Copy no-build zones From other machine files with defined no-build zones 15

  16. Slide 16: Quality measurements

    Quality measurements  Measure the dimension on your STL design  Set a tolerance  Insert the real measured values in Magics  Generate customized reports for quality tracking ! 16

  17. Slide 17: Use Nesting Density in reports

    Use Nesting Density in reports  New tag  It wasn’t added in existing default templates

  18. Slide 18: Create report of mmcf file

    Create report of mmcf file  Have report on Machine Properties  May compare two reports later Base

  19. Slide 19: Zoom button in list of noise shells

    Zoom button in list of noise shells Easily locate your noise shells

  20. Slide 20: Restore original position

    Restore original position  Import an assembly of different STL files  Perform operations on the files to prepare the parts to be 3D printed  Press the restore position button to move all parts to their original position and evaluate if they fit  Store the current position as new reference point

  21. Slide 21: Slice visualization

    Slice visualization  Tune slice position. (middle by default)  See slices and surface at a time

  22. Slide 22: Export Platform filename

    Export Platform filename Control your platform name when it is saved during export  Editable  Choose between: day, month, year, build counter, user name, machine name and project name  Stored in Magics preferences (not in mmcf)

  23. Slide 23: Add export folder to settings/working folders

    Add export folder to settings/working folders Define where your files should be stored during export

  24. Slide 24: More keyboard shortcuts for commands on tool sheets

    More keyboard shortcuts for commands on tool sheets  Delete triangle (Shift+D)  Detect intersecting triangles (Shift +Q)  Copy marked trianglesT (Shift +V)  Manual stitching (Shift+E)

  25. Slide 25: Translate to default Z in bottom/top plane

    Translate to default Z in bottom/top plane Part keeps the center point XY coordinates and are only moved along Z to have Z min as mentioned in Machine Properties

  26. Slide 26: Updated license wizard

    Updated license wizard  Specify whether you want to use a floating license in your license wizard  Avoid blocking a floating license which you don’t need 26

  27. Slide 27: Longer space for machine name

    Longer space for machine name Easier overview of long machine names

  28. Slide 28: Other changes

    Other changes Option to don't change the view when importing a part  View stays at current position when loading a new part  Optional setting in Settings/file I/O/Import

  29. Slide 29: Import/Load window

    Import/Load window • Import/Load: Documents folder is opened by default. – no demo files are available • According to standard Windows behaviour

  30. Slide 30: New 3D nester

    New 3D nester  Faster and multicore!  Achieves better results  Intelligent stop criteria (nest density)  Re-nest from certain height  Comprehensible progress window  Real time part position update on screen

  31. Slide 31: Nesting Density

    Nesting Density  See in a glimpse the efficiency of your build  Real time recalculation on screen Platform volume utilization = Total sintered volume of all parts divided by the full platform volume Current nesting density = Total sintered volume of all parts on the platform divided by the total v

  32. Slide 32: Trapped volumes detection

    Trapped volumes detection  Find hidden cavities (trapped volumes) to avoid build failures in SL  Control the accuracy of detected volumes  Fix issues by changing the orientation or adding perforations

  33. Slide 33: Pictures in SG parameter pages

    Pictures in SG parameter pages Easier to understand and control all parameters

  34. Slide 34: Copy supports for virtual copies

    Copy supports for virtual copies  Edit support once and apply it for all VCs  Generate supports for 1 part and copy it to all virtual copies !

  35. Slide 35: Broaden supports option at the bottom of the platform

    Broaden supports option at the bottom of the platform Broaden tiny supports to avoid build failures due to perforations in the machine platform

  36. Slide 36: Indicate which supports bump into your part

    Indicate which supports bump into your part  Generated support that bump into the part are shown in red in the support list  Extra column is available that shows whether the support ends:  On Part (default)  On Platform (optional)

  37. Slide 37: Short supports for EBM

    Short supports for EBM Limit the length of the supports  To conduct heat away from the part  Avoid too long supports on placed where no anchoring to the platform is needed

  38. Slide 38: Click on surface to select support

    Click on surface to select support Just click on a surface to change selection

  39. Slide 39: Supported area preview

    Supported area preview  See which surfaces need to be supported  Can be used in combination with Interactive e-Stage Rotation (with real time update!)  New button ( ) in SG toolbar

  40. Slide 40: Delete single cone out of an array

    Delete single cone out of an array Select one (or multiple) cone(s) and delete it (them)

  41. Slide 41: Give thickness to supports

    Give thickness to supports  Allow a better heat conduction away from the part  Give a higher strength to your metal supports  Keep very thin teeth with thick walls 41

  42. Slide 42: Cone support preview

    Cone support preview Avoid the slow generation of cones  Look at the line presentation of cones  Evaluate the size and position  Adapt the parameters if needed  Then press the actual cones button

  43. Slide 43: Cone supports

    Cone supports New only trim at platform option  No boolean operation performed at intersection of cone and part  Faster cone generation

  44. Slide 44: New SG+ options

    New SG+ options Have additional options for supports:  Create interactive angled supports  Define teeth breakpoints  Rescale platform projection area  Add volume supports between hatches for better heat conduction

  45. Slide 45: Interactive angled supports

    Interactive angled supports  Avoid support ending on surfaces  Add an angle to supports by simply pulling the axis

  46. Slide 46: Angles for cones and volume supports

    Angles for cones and volume supports  Angles are extended from regular supports to volume supports and cones  Angles can be used to avoid contact with the part  Part of SG+ module

  47. Slide 47: Streamics integration

    Streamics integration  New ‘Streamics part info’ tab available in part pages  Improved  labeling  communication 47

  48. Slide 48: e-Stage

    e-Stage  Longer combo box for e-Stage parameter in Machine properties  e-Stage 6.1 compatibility e-Stage

  49. Slide 49: Enjoy Magics 17

    Enjoy Magics17 Now multi-core for the fastest Magics experience yet Dr. Gert Claes Product Manager Magics

  50. Slide 50: Questions: contact software@materialise.be

    Should you have any question, please do not hesitate to contact us via software@materialise.be Or contact your local sales office

  51. Slide 51: More about Materialise

    Materialise oi Se More about Materialise 51

  52. Slide 52: Who is Materialise? Our mission

    Who is Materialise?  Started in 1990  HQ in Belgium  Offices world-wide  + 800 employees  Active in the field of Additive Manufacturing  +70 machines Our mission Knowledge Training & Consultancy Promote Research & Social centre education for AM development engagement for our companies customer

  53. Slide 53: Our Mission Statement

    Our Mission Statement Through our activities we want to contribute to a better and healthier world. We believe we can do this by innovating product development. Our software knowhow, hardware infrastructure and in-depth knowledge of Additive Manufacturing help us in realizing this mission.

  54. Slide 54: Materialise Global Presence

    Materialise Global Presence Ukraine Turkey USA Japan China Hong Kong Taiwan United Kingdom Czech Malaysia Belgium Singapore Republic Germany Austria Italy France Spain Portugal Australia Production Unit Offices Agents

  55. Slide 55: 55

    55

  56. Slide 56: 3 core competences in 8 focused business units

    3 core competences in 8 focused business units SAM AMS Software for AM .MGX RapidFit+ SOFTWARE PRODUCTION SERVICES i.materialise Biomedical Cranio-maxillofacial Orthopaedics 56

  57. Slide 57: Software for Additive Manufacturing

    Software for Additive Manufacturing SAM AMS Software for AM .MGX RapidFit+ SOFTWARE PRODUCTION SERVICES i.materialise Biomedical Cranio-maxillofacial Orthopaedics 57

  58. Slide 58: Materialise product & services portfolio

    Materialise product & services portfolio Expertise throughout the entire AM process Post 2D to 3D Research Quality AM preparation Production processing & Data & design control shipping FEA, windtunnels, Magics 3-maticengineering, ... Build Mimics Magics Mimics AutoFab R&D e-Stage processor 3-matic R

Materialise — Technical Presentation (October 2012) on 6ix