Autodesk, Inc. · NASDAQ:ADSK

Autodesk — Technical Presentation (2015)

53 slides from Autodesk's technical presentation, 2015

  1. Slide 1: Stop by our booth

    Stop by our booth: ……… 311……… register for a chance to win a free Drone & Apple Watch! bring me your business card … Applied Software giving away one FREE LiveLabLearning (LLL) class ...You must be present in this room to win… #AU2015

  2. Slide 2: COBie Implementation Case Study: Broward County Judicial Center

    ES10337 COBie Implementation Case Study: Broward County Judicial Center Rabi Sidawi, AIA Sr. AEC Solutions Consultant, Applied Software Twitter: @rabisidawi Join the conversation #AU2015

  3. Slide 3: ES10337 Class Summary

    ES10337 Class Summary COBie Implementation Case Study: Broward County Judicial Center A journey into the real world of COBie delivery. The Broward County Judicial Center in Ft. Lauderdale, Florida, is a successful example of a commercial BIM remodeling project, delivering COBie both during the Desig

  4. Slide 4: Key Learning Objectives

    Key Learning Objectives At the end of this class, you will be able to:  Take a journey into the real world of COBie delivery  Learn about a successful example of a BIM remodeling project  Compare COBie delivery for LOD 300 and LOD 500  Understand challenges, solutions and opportunities #AU2015

  5. Slide 5: Speaker: Rabi Sidawi, Applied Software

    Applied Software  B. Arch, M. Arch, M.A.  Senior AEC Solutions Consultant  Published author  25+ Years of AEC Experience  Autodesk Revit Implementation Certified Expert Rabi Sidawi, AIA  Autodesk Consultative Methodology Certification  Autodesk Structural Specialization Certification  Repeat

  6. Slide 6: Back to the Future

    Back to the Future Sometimes you may want to take two steps forward #AU2015

  7. Slide 7: Project Goals

    Project Goals A goal without a plan is just a wish #AU2015

  8. Slide 8: Project Goals: Owner-Defined Goals

    Setting a goal is the first step in turning the invisible into the visible CHALLENGES: Owner-Defined Goals 1. Architect will work with the Owner to confirm selection of maintainable assets to be tracked and matured within the project. 2. Architect to verify that all components anticipated Project Go

  9. Slide 9: Plan Ahead

    PLAN AHEAD MacLeamy Curve . BIM Methodology #AU2015

  10. Slide 10: Information Exchange

    Information Exchange Information Exchanges Operate  Design Design . Build . Operate  Build  Operate FI data Build WO PM Design AM HR CM CE CD PC DD SD time #AU2015

  11. Slide 11: Facilities

    Composed of . Served By . Described By . Operated By . Constrained By Facilities Served by Described by Operated by Constrained by Composed of • Floors • Building • Models • Job Plans • Resources • Rooms/Spaces Systems • Documents • Work Orders • Components • Product types • Specifications Facilitie

  12. Slide 12: Level of Development (LOD)

    Level of Development (LOD) Input . Quantity . Accuracy . Output . Quality . Reliability 100 Estimate it LOD 200 Specify it  Input: Quantity & Accuracy of 300 Buy it Information  Output: Quality & 400 Build it . install it Reliability of information 500 Commission it 600 Operate it #AU2015

  13. Slide 13: Maintainable Items, Assets and BIM Uses

    Building (Preventative) Maintenance Scheduling Building System Analysis Asset Management Space Management and Tracking Disaster Planning Record Modeling Maintainable Items . Assets Site Utilization Planning Construction System Design Digital Fabrication BIM Uses 3D Control and Planning  Maintainabl

  14. Slide 14: BIM Uses

    System Facility COMPONENT  Maintainable items Component . Maintainable Items . Assets  Assets Floor Component BIM USES Space/ Zone #AU2015

  15. Slide 15: COBie Strategy

    COBie STRATEGY Begin With The End in Mind  Define the BIM Goals for the Project  Describe the BIM Uses  Begin with the End in Mind #AU2015

  16. Slide 16: 12 Things You Should Know About COBie

    Bill East YouTube • COBie4Designers • COBie4Owners • COBie4Contractors “COBie is the data information exchange of all managed and maintainable assets in a building” You Should Know About COBie 12 Things #AU2015

  17. Slide 17: 12 Things: COBie Tabs

    You Should Know About COBie COBie Facility Tab COBie Floor Tab COBie Space Tab COBie Type Tab 12 Things COBie Component Tab #AU2015

  18. Slide 18: 12 Things: Design Build Operate

    Design Build Operate • Contact • Contact • Contact You Should Know About COBie • Facility • Facility • Facility • Floor • Floor • Floor • Space • Space • Space • Zone • Zone • Zone • Type • Type • Type • Component • Component • Component • System • System • System • Assembly • Assembly • Assembly •

  19. Slide 19: BIM to COBie Planning Workflow

    BIM to COBie Planning Workflow Schematic Design Phase / Construction Documents Phase Compiled COBie 2.0 Spreadsheet Import Name = Project Name Revit Data BIMLINK Categories in Category = OmniClass No ; Title Source individual spreadsheets: Project Name = Initials PUBLISH Facility Tab You Should Know

  20. Slide 20: BIM-COBie Mapping

    BIM-COBie Mapping LOD 300 MEP defined Information Exchange Strategy BIM Component Checklist You Should Know About COBie 12 Things #AU2015

  21. Slide 21: 12 Things You Should Know About COBie

    12 Things You Should Know About COBie #AU2015

  22. Slide 22: Broward County Judicial Center

    Broward County BCJC Broward County Judicial Center Fort Lauderdale, FL #AU2015

  23. Slide 23: Solutions: BIM Project Execution Plan

    Solutions BIM Project Execution Plan (PxP) #AU2015

  24. Slide 24: What Assets to Track?

    BIM Project Execution Plan (PxP) What Assets to Track? 1. Project Info 2. Levels 3. Rooms 4. Light Fixtures 5. Mechanical Equipment 6. Electrical Equipment 7. Specialty Equipment 8. Floors Solutions 9. Roofs 10. Electrical Fixtures 11. Lighting Devices 12. Plumbing Fixtures #AU2015

  25. Slide 25: Solutions: BIM Project Execution Plan

    Solutions BIM Project Execution Plan (PxP) #AU2015

  26. Slide 26: Solutions: BIM Project Execution Plan

    Solutions BIM Project Execution Plan (PxP) #AU2015

  27. Slide 27: Solutions: BIM Project Execution Plan

    Solutions BIM Project Execution Plan (PxP) #AU2015

  28. Slide 28: Solutions: BIM Project Execution Plan

    Solutions BIM Project Execution Plan (PxP) #AU2015

  29. Slide 29: Revised Construction Phase Guidelines

    BIM Project Execution Plan (PxP) .. revised Construction Phase Guidelines 1. Model Sharing 2. LOD can vary by element 3. Mandate BIM 360 Glue and BIM 360 Field 4. Prequalify Subcontractors based on BIM Proficiency 5. Supplemental Instructions shall be Solutions incorporated into the BIM models 6. Co

  30. Slide 30: COBie Process and Workflow

    COBie Process COBie Workflow Process . Best Practices . Workflow 1. Confirm selection of maintainable assets to be tracked and matured 1. Populating the BIM Component Checklist within the project. 2. Identify Revit Categories and Family 2. Verify that all components anticipated in the model exist an

  31. Slide 31: COBie Process

    Process . Best Practices . Workflow COBie Process 1. Confirm selection of maintainable assets to be tracked within the project 2. Verify that all components anticipated in the model exist and have valid naming 3. Verify that all components have a proper OmniClass Number and Title 4. Provide Level of

  32. Slide 32: BIM-COBie Best Practices

    Process . Best Practices . Workflow BIM-COBie Best practices • Assign the proper Revit Category to each component • Assign the proper Component Family Name and Type Name • Eliminate the use of Revit in-place families COBie • Minimize the use of Model Groups #AU2015

  33. Slide 33: COBie Workflow

    COBie Workflow Process . Best Practices . Workflow 1. Populating the BIM Component Checklist 2. Identify Revit Categories and Family Types to be tracked 3. Map Revit data to COBie spreadsheet tabs 4. Assign OmniClass table 23 codes to component and system families 5. Assign OmniClass table 13 space

  34. Slide 34: Model Review

    Model Review Autodesk Revit #AU2015

  35. Slide 35: What about Omniclass?

    What about Omniclass? LOD 150. Define Uniformat II Classification as assemblies LOD 200. Generate cost estimates based on assemblies LOD 250. Define CSI Master-Spec Material classification LOD 250. Generate cost estimates to be based on count and material take-offs LOD 300. Define Omniclass Classifi

  36. Slide 36: BIM Proficiency

    BIM Proficiency @ 100% SD’s 8 BIM Proficiencies #AU2015

  37. Slide 37: Clash Detection

    Clash Detection Autodesk Navisworks Manage #AU2015 .mht

  38. Slide 38: Visualization

    BIM Peer Review @ 100% SD’s Autodesk BIM 360 Glue Visualization BIM 360 Glue #AU2015

  39. Slide 39: Corrective Strategies

    Corrective Strategies Autodesk Revit #AU2015

  40. Slide 40: COBie Export Setup Instructions

    COBIE EXPORT SETUP INSTRUCTIONS Before you Start • Detach & Save as Central File • Create a 3D View • Merge Phase 2 & 3 (Use combine with next) • Merge Phase Existing & Phase 1 (Use combine with previous) COBie Extension Contacts • Import Contacts from XML • Change contact information • Export as XM

  41. Slide 41: COBie Toolkit for Autodesk Revit

    Autodesk Building Solutions YouTube COBie Toolkit for Autodesk Revit Rich Mitrenga T.J. Meehan For Autodesk Revit COBie 2.4 #AU2015

  42. Slide 42: COBie 2.4: General Settings

    General Units GUID Rooms Names Spaces For Autodesk Revit COBie 2.4 Spaces #AU2015

  43. Slide 43: COBie 2.4: Spaces and Export

    Spaces Spaces Attributes Do Not Use Coordinates .. if Coordinates For Autodesk Revit COBie 2.4 Schedules Finalize Save + Export #AU2015

  44. Slide 44: COBie Extension: Identify COBie Elements

    COBie 2.4 FB COBie Extension | Modify For Autodesk Revi AUTODESK UNIVERSITY 2015 IF COBie Extension | Identify COBie Elements Select Elements Select which Revit families, types, and elements get exported to the COBie spreadsheet. Elements Air Terminals » ©) Cable Tray Fittings Cable Tray Runs » i Ca

  45. Slide 45: General and BCJC Considerations

    General BCJC • Use COBie 2.4 formatted spreadsheet • BIM Uses defined by Broward County • Use the BIM Project Execution Plan (PxP) • Model Component Author (MCA) • Does NOT import data back into Revit • Who will lead each discipline? • Does NOT read linked files • Transfer Data Custodian role from S

  46. Slide 46: General

    General • Use COBie 2.4 formatted spreadsheet • Use the BIM Project Execution Plan (PxP) • Does NOT import data back into Revit • Does NOT read linked files For Autodesk Revit • Remove Design Options & Phasing before you start COBie 2.4 • Integration with Broward County FM System: What FM System doe

  47. Slide 47: BCJC

    BCJC • BIM Uses defined by Broward County (Owner) • Define the Model Component Author (MCA) • Transfer Data Custodian role from AE Team to Construction Team at 100% CD • Early Participation of all stakeholders For Autodesk Revit • Construction Team role in COBie: • Do you have a BIM/COBie process? C

  48. Slide 48: Best Practices

    Best Practices • Delete redundant rooms and spaces • Do not export to COBie coordinates tab For Autodesk Revit • Do not append (_MEP) to space names COBie 2.4 • Attribute tab contain the custom parameters • Do not use COBie zones & system tabs #AU2015

  49. Slide 49: BIM 360 Glue: BCJC Project Merged Model

    AUTODESK* BIM 360GLUE® Ast_que ) BCJC Project ) MERGED ALL G [AC82)-197) : TOP OF ELEY. (15) INIVERSITY 2015

  50. Slide 50: Be heard!

     Via the Survey Stations, email or mobile device.  AU 2016 passes awarded daily! Provide AU session feedback  Give your feedback after each session.  Give instructors feedback in real-time. Be heard! #AU2015

  51. Slide 51: Forgot to take notes?

    After AU visit:AutodeskUniversity.com Forgot to take notes? Click on My AU to find:  Class Recordings  Presentations  Handouts All of your sessions will be there to enjoy again and again. No problem! #AU2015

  52. Slide 52: Autodesk trademark notice

    Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specific

  53. Slide 53: Stop by our booth

    Stop by our booth: ……… 311……… register for a chance to win a free Drone & Apple Watch! … and the Winner is … Applied Software giving away one FREE LiveLabLearning (LLL) class ...You must be present in this room to win… #AU2015

Autodesk — Technical Presentation (2015) on 6ix