Roche Holding Ltd · SIX:RO
Roche — Fact Sheet (October 2017)
7 slides from Roche's fact sheet, October 2017
Slide 1: Input station
cobas® 8100 automated workflow series Input station Mandatory, maximum 1 station Input Buffer (IPB) Basic specs • 50, 100 position generic trays • Either 13 mm or 13 & 16 mm flex-trays • Optional sample loading with 5 pos. racks and 100 pos. trays • Loading area for up to 400 samples • Tube type ide
Slide 2: Sample Check Module and Destopper
Section title Sample Check Module (SCM) Basic specs • Sample volume detection / LLD • Accurate determination after separation • Detectable through labels • Compares the volume in the tube to the required volume • Sample quality assessment functionality • Qualitative measurement of Serum Indices with
Slide 3: Aliquot station
cobas® 8100 automated workflow series Aliquot station Optional, maximum 1 station Barcode Labeler / Tube Feeder (BCL) Basic specs • Thermal transfer printer • Compatible with all standard bar codes (Codabar (NW7), interleaved 2 of 5 (ITF), Code 39, Code 128) • 3,000 aliquot tubes onboard • Bulk load
Slide 4: Section title Column heading
Section title COBAS is a trademark of Roche. All other trademarks are property of their respective owners. © 2017 Roche Published by: Roche Diagnostics (Schweiz) AG Industriestrasse 7 6343 Rotkreuz cobas.com 4 Column heading
Slide 5: Output station
cobas® 8100 automated workflow series Output station Mandatory station, maximum 2 stations Restopper Flex-cap (RSF) / Restopper Screw Cap (RSS) Basic specs • Storage capacity at least 2,500 caps – Optical sensor • RSF: flex caps (Sarstedt) for 13 and 16 mm tubes • RSS: screw caps • Throughput: 600 s
Slide 6: Output Buffer / Sorter (OBS)
Section title Output Buffer / Sorter (OBS) Basic specs • Sample sorting into 25, 50, 100 position generic trays • Either 13 mm or 13 & 16 mm flex-trays – Group multiple targets into logical targets – Split sorting targets into smaller logical targets – Sysmex racks, Hitachi 5 pos. racks • Sorting ar
Slide 7: Installation specifications
cobas® 8100 automated workflow series Installation specifications Environmental conditions The following environmental specifications should be followed in order to ensure correct operation of the system. 1 Indoor use only 2 Avoid exposure to dusts and provide adequate ventilation 3 No direct sunlig