DuPont de Nemours, Inc. · NYSE:DD

DuPont de Nemours — DuPont — Technical Presentation (December 2011)

54 slides from DuPont de Nemours's technical presentation, Dec 2, 2011

  1. Slide 1: Fundamentals of Package Engineering & Design

    Fundamentals of Package Engineering & Design

  2. Slide 2: Presenters

    Presenters Moderator: Daphne Allen Editor Pharmaceutical & Medical Packaging News Karen Polkinghorne Packaging Engineer & MDM Specialist DuPont Medical & Pharmaceutical Packaging 12/2/2011 STERILE BARRIER SYSTEMS 2

  3. Slide 3: Package Engineering & Design

    Package Engineering & Design Basic functions of medical package • Product protection – Microbial barrier – Physical protection from damage and environment © ASM.org • Allow for sterilization • Maintain sterility and integrity until use • Easy opening and aseptic presentation • Identify the product,

  4. Slide 4: DuPont Tyvek Properties Feature Benefit

    DuPont™ Tyvek® Properties Feature Benefit Outstanding Sterility microbial barrier maintenance 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 4

  5. Slide 5: How Can Tyvek Be Breathable and Provide a Sterile Barrier?

    How Can Tyvek® Be Breathable and Provide a Sterile Barrier? 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 5

  6. Slide 6: Louis Pasteur's Experiment

    Louis Pasteur’s Experiment 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 6

  7. Slide 7: Results of Experiment

    Results of Experiment Would the broth Pasteur sterilized in 1863 still be sterile today? On display at Smithsonian... 130+ years and counting Adequate tortuous paths provide an effective sterile barrier Sterilized packages remain sterile until opened or damaged 12/2/2011 Copyright © 2011 DuPont. FUN

  8. Slide 8: DuPont Tyvek Properties Feature Benefit

    DuPont™ Tyvek® Properties Feature Benefit Outstanding microbial barrier Sterility maintenance Sterilization Broad range of methods; compatibility processing flexibility Superior tear strength Reduction in packaging related and puncture resistance complaints and recalls Clean peel Low linting results

  9. Slide 9: Package Engineering & Design

    Package Engineering & Design Materials can only perform as intended if used in combination with great design principles Even excellent materials can be sabotaged by poor design 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 9

  10. Slide 10: Peel Pouches Design Tips

    Peel Pouches Design tips • Allow ample room between chevron tip and edge of pouch – Medical personnel come in all shapes and sizes, design enough room for everyone to get their hands between the chevron and the edge of the pouch – Remember, most medical personnel are ―gloved‖ when opening packages –

  11. Slide 11: Folding Pouches

    Folding Pouches Not a good idea – leads to problems Problem #1 – Tents • Form abrasion points with carton • Scuffing can cause holes in the package 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 11

  12. Slide 12: Examples of Issues Caused by Folding

    Examples of Issues Caused by Folding Tyvek® Film 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 12

  13. Slide 13: Microscopic Image of Tent Abrasion

    Microscopic Image of “Tent Abrasion” ® 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 13

  14. Slide 14: Folding Pouches Problem #2 – Sheet Separation

    Folding Pouches Problem #2 – Sheet Separation • False positives during integrity testing – Folding can cause sheet separation – Explanation of false positives caused by folding – ASTM F1929: Dye Penetration Integrity Test video 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING &

  15. Slide 15: Tyvek

    Tyvek® Tough layered product through endless fibers High barrier against micro-organisms 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 15

  16. Slide 16: Observed Behavior

    Observed Behavior Relaxed Bending Compression Skin Core Tension Skin Complex Tyvek® morphology (bonded skin, unbonded core) dictates complex material model to capture package mechanics 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 16

  17. Slide 17: Objectives

    Objectives A: Modest amount of bending B: Severe amount of bending 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 17

  18. Slide 18: Folding Pouches Problem #2 – Sheet Separation

    Folding Pouches Problem #2 – Sheet Separation • False positives during integrity testing • Folding can cause sheet separation • False positives caused by folding • ASTM F1929: Dye Penetration Integrity Test Examples of internal Tyvek® separation due to hard crease or folding of the material 12/2/201

  19. Slide 19: Wicking vs. Channel

    Wicking vs. Channel 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 19

  20. Slide 20: Header Bags Design Tips

    Header Bags Design tips • Design the opening to be large enough to allow the product to be aseptically presented – Easy to fit in the bottom, not so easy to take out of the top • Association of periOperative Registered Nurses (AORN) – Sets nursing standards and best practices – Consider the inner ed

  21. Slide 21: Header Bag Example

    Header Bag Example 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 21

  22. Slide 22: Header Bag Opening Video

    Header Bag Opening Video 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 22

  23. Slide 23: Rigid Thermoformed Trays with Tyvek Lids

    Rigid Thermoformed Trays with Tyvek® Lids The ―ultimate medical package‖ Product protection Aseptic presentation Organization of components Familiar to hospital personnel 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 23

  24. Slide 24: Rigid Thermoformed Trays with Tyvek Lids

    Rigid Thermoformed Trays with Tyvek® Lids 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 24

  25. Slide 25: Example of Delamination / Fiber Tear

    Example of Delamination / Fiber Tear 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 25

  26. Slide 26: Why Is Fiber Tear an Issue?

    Why Is Fiber Tear an Issue? 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 26

  27. Slide 27: Rigid Thermoformed Tray with Tyvek Lid Design Tips

    Rigid Thermoformed Tray with Tyvek® Lid Design tips • Eliminate fiber tear…yes! – The Problem…the lid is too close to the edge of the tray » Need a clean initiation point to not induce fiber tear » Potential sealant at interface of tray edge and lid – The Solution… 12/2/2011 Copyright © 2011 DuPont.

  28. Slide 28: Three Things Cause Fiber Tear…

    Three Things Cause Fiber Tear… Avoid Them and Make Great Packages 1: Misplacement of the lid during sealing Tray is BLUE / Lid is WHITE Unlikely Fiber Tear Possible Fiber Tear Severe Fiber Tear 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 28

  29. Slide 29: Lid Experiment

    Lid Experiment Proper lid placement with overhang 32 out of 32 samples No overhang 26 out of 32 samples 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 29

  30. Slide 30: Solution: return flange

    Solution: return flange Eliminates lid placement issues Solution is designed into the tray 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 30

  31. Slide 31: Three Things Cause Fiber Tear…

    Three Things Cause Fiber Tear… Avoid Them and Make Great Packages 2. Edge of Tyvek® lid, jagged cut 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 31

  32. Slide 32: Three Things Cause Fiber Tear…

    Three Things Cause Fiber Tear… Avoid Them and Make Great Packages 3: Over sealed tray 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 32

  33. Slide 33: Flexible Form Fill Seal (FFS) – Typical Seal Configuration

    Flexible Form Fill Seal (FFS) – Typical Seal Configuration Film Preheat Area Forming Filling 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 33

  34. Slide 34: Flexible FFS – Seal Skirt Design

    Flexible FFS – Seal Skirt Design Forming Sealing Unsealed gap avoids the risk of delamination Filling 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 34

  35. Slide 35: Transparentization

    Transparentization Occurs when Tyvek® fibers receive too much heat, flattening the fibers or even melting the fibers together, more like a film structure How to reduce/eliminate transparentization and spotty seals • Trays – Add DuPont™ Teflon® sheet to top of heat seal platen to allow for better hea

  36. Slide 36: Too Much Heat for Tray, Not Enough Heat to Activate Heat Seal Coating

    Too Much Heat for Tray, Not Enough Heat to Activate Heat Seal Coating 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 36

  37. Slide 37: Transportation

    Transportation Will your design survive? 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 37

  38. Slide 38: Changes in Air Pressure

    Changes in Air Pressure Air pressure inside package vs. outside package Non-breathable materials can‘t adjust to changes in air pressure Design your packaging to meet the challenges of the distribution environment 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 38

  39. Slide 39: If Tyvek pouches get wet, are they still sterile?

    If Tyvek® pouches get wet, are they still sterile? 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 39

  40. Slide 40: Are wet pouches still sterile?

    Are wet pouches still sterile? It depends…. • Source • Duration Filamentous Fungi 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 40

  41. Slide 41: Fire in the OR…is the product okay to use?

    Fire in the OR…is the product okay to use? 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 41

  42. Slide 42: Fire in the OR…where there's fire, there's smoke

    Fire in the OR…where there’s fire, there’s smoke ISO 11607, 7.4.3.2 The manufacturer shall demonstrate that, under the rigors of distribution, storage, handling and aging, the integrity of the final package is maintained at least for the claimed shelf life of the medical device under storage conditi

  43. Slide 43: Package Engineering & Design

    Package Engineering & Design Basic Functions of Medical Package • Product protection – Microbial barrier – Physical protection from damage and environment © ASM.org • Allow for sterilization • Maintain sterility and integrity until use • Easy opening and aseptic presentation • Identify the product,

  44. Slide 44: Recyclability and Sustainability

    Recyclability and Sustainability 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 44

  45. Slide 45: Recyclability of Tyvek

    Recyclability of Tyvek® Tyvek® • HDPE is the 2nd most recycled plastic • High volume HDPE end uses • Widely recognized by healthcare workers • Plastic recycling programs – Thermoplastics commingled – Monomaterial (HDPE, PP, PET) – No paper or metal DuPont is • Compliance is the responsibility of spr

  46. Slide 46: Healthcare Plastics Recycling Council

    Healthcare Plastics Recycling Council What is HPRC? • Private, technical coalition of industry peers across healthcare, recycling and waste management industries seeking to improve recyclability of plastic products within healthcare. Mission • To inspire and enable the healthcare community to implem

  47. Slide 47: Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN

    12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 47

  48. Slide 48: Helpful Reference Documents

    Helpful Reference Documents ANSI/AAMI/ISO 11607-1:2006 ―Packaging for terminally sterilized medical devices—Part 1: Requirements for materials, sterile barrier systems, and packaging systems‖ ANSI/AAMI/ISO 11607-2:2006 ―Packaging for terminally sterilized medical devices—Part 2: Validation requireme

  49. Slide 49: DuPont Tyvek in 2012 and Beyond

    DuPont™ Tyvek® in 2012 and Beyond DuPont will be transitioning Tyvek® 1073B and Tyvek® 1059B to manufacturing lines that use our latest flash-spinning technology to help ensure continuity and flexibility of supply to meet the growing demand for healthcare packaging around the globe. The next DuPont

  50. Slide 50: Helpful Reference Documents

    Helpful Reference Documents www.medicalpackaging.dupont.com 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 50

  51. Slide 51: Tyvek…When What's Inside Matters

    Tyvek®…When What’s Inside Matters 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 51

  52. Slide 52: Examples of Microbial Challenges

    Examples of Microbial Challenges Slime mold stack E. coli Borrelia burgdorferi Streptococcus Fungal spores & spore cap Amoebae Bacillus anthracis Pseudomonas Flu Virus Paramecium *Photos from ASM.org Back 12/2/2011 Copyright © 2011 DuPont. FUNDAMENTALS OF PACKAGE ENGINEERING & DESIGN 52

  53. Slide 53: Q&A… Thank you!

    Q&A… Thank you! Thank you for joining today‘s webcast on ‗Fundamentals of Package Engineering & Design‘! Contact: Daphne Allen, Editor Pharmaceutical & Medical Packaging News daphne.allen@ubm.com Karen Polkinghorne Packaging Engineer & MDM Specialist DuPont Medical & Pharmaceutical Packaging Karen.P

  54. Slide 54: DuPont trademarks notice

    © 2011 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, The miracles of science™, Teflon® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates.

DuPont — Technical Presentation (December 2011) on 6ix