Outokumpu Oyj · OMXHEX:OUT1V

Outokumpu Oyj — Technical Presentation (September 2013)

15 slides from Outokumpu Oyj's technical presentation, Sep 11, 2013

  1. Slide 1: Chrome makes the steel stainless – Kemi Mine today

    Chrome makes the steel stainless – Kemi Mine today Antti Pihko, Vice President – Kemi Mine September 11, 2013

  2. Slide 2: Kemi Mine - the only chromite mine within European Union

    Kemi Mine - the only chromite mine within European Union • Chrome deposit found in 1959, decision to open the mine in 1964 • Production started from open pit in 1968, annual volume increased > 1,0 Mt in 1985 • Underground mine was built in 1999 – 2003, production capacity doubled in 2010 - 2012 • Al

  3. Slide 3: Ore formation

    Ore formation • layered intrusion • consists of several ore bodies • dip 70o, average width 40 m • length 3 km • grade 29 % Cr2O3 • depth unknown Granite Talc carbonate Main pit Ore 9/9/2013 3

  4. Slide 4: Kemi Mine - simplified long section

    Kemi Mine - simplified long section SW NE Backfilling station 140 m3/s 70 m3/s 190 m3/s 115 Repair shop FAR2 EAR6 EAR3 EAR4 60 m3/s Final pit bottom Sublevel Caving area Trial Stoping area Backfill raise 1 275 277 Backfill raise 2 300 350 Repair shop and pump station 350 Surmaoja exploration tunnel

  5. Slide 5: Mining method

    Mining method Drifting Cable bolting Production drilling Charging and blasting Mucking 9/9/2013 5

  6. Slide 6: Material flow after F3-expansion

    Material flow after F3-expansion Ore 2 700 000 t/a 26.0 % Cr2O3 Upgraded HMS feed Lumpy Ore Crushing Heavy Medium Separation 400 000 t/a capacity 385 t/h capacity 231 t/h 35.5 % Cr2O3 utilization rate 80% utilization rate 80% Lumpy Rock Intermediate product fines HMS sludge Fine Stockpile for Grindi

  7. Slide 7: Gravity based method for Lumpy Ore production

    Gravity based method for Lumpy Ore production • Two stage gravity based separation (Heavy Medium Separation or Sink-Float- Method) • FL Smidth Wemco separation drums • No chemicals used • 1st rejection (Lumpy Rock) for mine backfill • Intermedium product for further crushing  fine concentrating • T

  8. Slide 8: Gravity separation with spirals for Fine Concentrate production

    Gravity separation with spirals for Fine Concentrate production • Three stage gravity separation • No chemicals used • Coarse and Fine circuits • 456 spiral starts 9/9/2013 8

  9. Slide 9: Re-circulation of process water

    Re-circulation of process water ( Fresh water) 1 4 2 3 Occasional overflow as per permit 9/9/2013 9

  10. Slide 10: Products of the Kemi Mine

    Products of the Kemi Mine • Upgraded lumpy ore • 35.5% Cr2O3 (typical) • lump size 10 - 120 mm • annual production ~ 400 000 t (after F3 expansion) • Metallurgical grade fine concentrate • 45.0% Cr2O3 (typical) • average grain size 0.2 mm • annual production ~ 850 000 t (after F3 expansion) 9/9/2013

  11. Slide 11: Tornio Works material flow

    Tornio Works material flow FeCr Production Stainless Production Kemi Mine Ferrochrome Ferrochrome Works Raw Materials Slabs Steel Melting Shop Black Hot Coils Hot Rolling Mill White Hot Products Cold Rolling Mill Cold Rolled Products Finishing Plant Tube Mills Other Steel Mills End-users and Distrib

  12. Slide 12: Personnel 1.1.2013 at Kemi Mine

    Personnel 1.1.2013 at Kemi Mine • Mining and Geology • Outokumpu personnel • blue collar 65 • blue collar 121 • white collar 40 • white collar 60 • Concentrator • total 181 • blue collar 52 • Contractor personnel • white collar 15 • total appr. 120 - 150 • Warehouse and administration • blue collar

  13. Slide 13: Strong improvement in lost-time injuries at Kemi mine

    Strong improvement in lost-time injuries at Kemi mine 20 15 14 10 10 11 8 8 5 8 6 2 1 4 4 4 2 1 2 2 2 3 1 2 2 2 0 1 0 1 0 1 2000 01 02 03 04 05 06 07 08 09 10 11 12 2013 ytd Own Contractor 9/9/2013 13

  14. Slide 14: Safety Instructions

    SAFETY INSTRUCTIONS 9/9/2013 14

  15. Slide 15: Our vision: A world that lasts forever

    Our vision “A world that We believe in a world that is durable, sustainable, efficient, lasts forever.” and designed to last forever. The world deserves innovations that can stand the test of time and are ready to be born again at the end of their life cycle. Our materials are vital in enabling a su

Outokumpu — Technical Presentation (September 2013) on 6ix