Ryerson Holding Corporation · NYSE:RYZ

Ryerson — Investor Presentation (February 2007)

43 slides from Ryerson's investor presentation, Feb 14, 2007

  1. Slide 1: Investor Presentation February 2007

    Exhibit 99.1 Investor Presentation February 2007

  2. Slide 2: Safe harbor provision

    Safe harbor provision During this presentation, we will make forward-looking statements subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. Such risks and uncertainties include, but are not limi

  3. Slide 3: Proxy Solicitation

    Proxy Solicitation Important Information Ryerson Inc. plans to file with the Securities and Exchange Commission (the "SEC") and mail to its stockholders a Proxy Statement in connection with its 2007 Annual Meeting, and advises its security holders to read the Proxy Statement relating to the 2007 Ann

  4. Slide 4: Use of non-GAAP financial information

    Use of non-GAAP financial information The Company uses the LIFO method of inventory accounting in the U.S., which results in a better matching of costs and revenues than the FIFO method. To supplement its consolidated condensed financial statements presented on a GAAP basis, the company has provided

  5. Slide 5: Agenda

    Agenda Historical perspective Short-term improvements Long-term profitable growth 4

  6. Slide 6: Ryerson Facts

    Ryerson Facts $6 billion in revenue 100+ locations serving the U.S. and Canada Leading position in stainless steel and aluminum Consolidation in U.S. fragmented service center industry International JVsin high growth emerging markets - Mexico, India and China 5

  7. Slide 7: Rich product mix and end markets

    Rich product mix and end markets 2006 revenues by product 2006 sales by end market Other Other Fabrication & 5% 8% carbon plate 9% Carbon flat Transportation rolled Machinery 11% 25% 27% Bars, tubing, structurals 9% Construction, wholesalers, mills 13% Fabricated Electrical metals machinery 28% Stai

  8. Slide 8: Broad geographic footprint

    Broad geographic footprint 7

  9. Slide 9: Historical perspective

    Ryerson Historical perspective Short term improvements Long term profitable growth 8

  10. Slide 10: Perspective on historical performance and trends

    Ryerson: Perspective on historical performance and trends Industry participants • A.M. Castle • Russel Metals • Reliance Steel & Aluminum • Samuel Manu-Tech • Olympic Steel • Shiloh Industries • Metals USA • Steel Technologies • Earle M. Jorgensen • Worthington Industries Comparable measures • ROIC

  11. Slide 11: Ryerson's Programs are Producing Results

    Ryerson’s Programs are Producing Results Since 1998, Ryerson has implemented significant cost savings initiatives and has steadily improved results relative to peer median over the last 6 years 1 Return on Invested Capital (LIFO companies adjusted to FIFO) 26.0 Pre- Post- 23.0 18.0 Restructuring Res

  12. Slide 12: Ryerson's Changing Product Mix

    Ryerson’s Changing Product Mix Salesincrease of over 100% through organic growth and strategic acquisitions; stainless and aluminum sales have grown to approximately 52% of sales 1998 Sales by Product 2006 Sales by Product $2,783mm $5,909mm Other Fabrication and 5% Other Carbon Plate Fabrication and

  13. Slide 13: Inventory Management

    Inventory Management On average, Ryerson’s inventory turnover has been consistently higher than the Metals Service Center Institute’s reported turns 5.0 4.8 4.6 4.4 4.2 Average 4.0 3.8 3.8 3.6 3.6 3.4 3.2 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Ryerson MSCI Note: 1 Calculated as cost of go

  14. Slide 14: Ryerson LIFO Overview

    Ryerson LIFO Overview 1 Discussion Ryerson Cumulative EBIT Under Last-In First-Out ("LIFO") the most recently 900 862 purchased inventory is costed against sales first 800 In any given period, there will be a difference 700 between COGS calculated on a LIFO basis versus COGS calculated on a FIFO bas

  15. Slide 15: Short term improvements

    Agenda Historical perspective Short term improvements Long term profitable growth 14

  16. Slide 16: Opportunities to improve performance short run and long-term growth

    Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure Under-performing markets with targeted savings of $30mm in 70 individual markets; 2007 (before restructuring each has a separate charges, if any) P

  17. Slide 17: Large service centers targeted for improvement

    Most service centers are performing well, but 5 large service centers targeted for improvement Service Center ROIC Distribution 25% 20% 15% 10% 5 Service Centers Changes in process 5% New management in place as of Jan. 1, 2007 0% Targeted savings of $30mm in 2007 (before (5%) restructuring charges,

  18. Slide 18: Remaining Integris integration synergies

    Remaining Integris integration synergies $42 million of annualized cost savings through 2006 15 markets remain with redundant facilities to be consolidated in 2007 Complete SAP roll-out to remaining Integris locations by year- end allows 1. Facility consolidation 2. Shut down of Integris legacy IT p

  19. Slide 19: Inventory bulge over 2H06

    Inventory bulge over 2H06 Days Sales in Inventory Strong volume, tight supply 1H06 130 125 Market weakens, mills cut 121 122 lead times and ship early 120 during 2H06 115 Ryerson and peer 110 110 inventories grew 105 105 100 95 90 88 85 85 80 6/30/06 9/30/2006 12/31/2006 Ryerson MSCI 18

  20. Slide 20: Inventory actions

    Inventory actions New organization 1,150 1,850 • New supply chain leadership and 1,103 staff in place 1,100 1,083 Better process management 1,750 • Improved forecasting capability 1,052 1,046 1,050 • Revised ordering parameters and 1,650 safety stock levels 1,007 Upgraded software tools 1,000 • SAP

  21. Slide 21: Opportunities to improve performance short run and long-term growth

    Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure Under-performing markets with targeted savings of $30mm in 70 individual markets; 2007 (before restructuring each has a separate charges, if any) P

  22. Slide 22: Long-term profitable growth

    Ryerson Historical perspective Short term improvements Long-term profitable growth 21

  23. Slide 23: Long-term profitable growth based on three fundamental principles

    Long-term profitable growth based on three fundamental principles 1. Focus on operating efficiency 2. Capture organic growth 3. Seek acquisitions and joint ventures to: Structurally enhance competitive positions Provide additional earnings growth in domestic and global markets Part way through a mul

  24. Slide 24: Upgrade information systems with SAP

    Upgrade information systems with SAP Consolidate 5 legacy platforms into one Estimated $80 million project to be completed by year-end 2008 Estimated cost reductions alone should generate a high return on the investment Additional benefits: • Seamless link with customers and suppliers • More detaile

  25. Slide 25: Operating efficiency

    Operating efficiency Transfer Lean Six Knowledge Sigma Lean Six Sigma problem solving and continuous improvement process to increase operating efficiencies Sell the Target improvements throughout the company/ Change across all strategic initiatives Specific financial goals Quantitative measurement o

  26. Slide 26: Organic growth

    Organic growth National Marketing Programs Added 10,000 accounts and $200MM of revenue since 2004 Aggressive • Promotions Leads to trial • Good experience marketing leads to • Targeted and brand retention vertical markets creation • Extensive • Direct outbound external and telesales internal metrics

  27. Slide 27: Acquisition and joint venture strategy

    Acquisition and joint venture strategy Service center industry is fragmented and consolidating “Add strength Cross-selling to strength” Completed 8 opportunities Highest overall acquisitions since 1997 potential Won’t overpay Priority on keeping customers and key “Buying a cash employees flow” New m

  28. Slide 28: International JVs provide opportunities in growth markets

    International JVs provide opportunities in growth markets JV partners are established local players Can provide services to U.S. customers global operations in Mexico, India and China JV financial performance • Combined sales of JVs exceeds $500MM in 2006 • Five year compound annual growth rate in e

  29. Slide 29: International JVs

    International JVs Collado Ryerson Mexico –approximately $75MM of annual Mexico revenue; 50/50 fabrication venture Tata Ryerson India –approximately $200MM of annual revenue India 50/50 venture Indian metals distribution in its infancy Expanded product line to include stainless and fabrication VSC Ry

  30. Slide 30: Opportunities to improve performance short run and long-term growth

    Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure Under-performing markets with targeted savings of $30mm in 70 individual markets; 2007 (before restructuring each has a separate changes, if any) P

  31. Slide 31: Management and Governance

    Management and Governance Ryerson develops its leadership through internal programs and external recruiting Short- and Long-term incentive plans aligned with shareholders Highly qualified board with many years of relevant experience 30

  32. Slide 32: Ryerson leadership development process

    Ryerson leadership development process Internal Development External Recruiting Comprehensive training Executives with specialized expertise Early identification of high • Supply chain management potential managers • Operations/lean manufacturing Rotational assignments • Six Sigma Mentoring • Market

  33. Slide 33: Incentive compensation aligned with stockholders

    Incentive compensation aligned with stockholders Short- and Long-Term Incentive Plans Short-term incentive: Annual incentive tied to OROOA (operating return on operating assets) Target set by Compensation Committee Corporate staff: Tied to corporate performance Service center staff: Tied to individu

  34. Slide 34: Board of Directors

    Board of Directors 40% of the Board has been newly elected in last four years Ryerson’s Board members have a variety of backgrounds in core areas relevant to operations, including complex multi-location service businesses, finance, marketing, technology, M&A and International Board has active operat

  35. Slide 35: Conclusion

    Conclusion: In process of multi-year program Short-term benefits Long-term profitable growth 34

  36. Slide 36: Addendum

    Addendum © RYERSON. 35

  37. Slide 37: Industry Analysis Assumptions

    Industry Analysis Assumptions Methodology: • Gross Margin excludes impact of Depreciation and Amortization (D&A); if a company does not break out D&A on the income statement (such as Ryersonpost 2002) 50%of D&A is allocated to Cost of GoodsSoldand 50%is allocated to Operating Expenses (unless alloca

  38. Slide 38: Reconciliation of Certain Non-GAAP Items

    Reconciliation of Certain Non-GAAP Items ($mm) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 Operating Profit 133.1 96.0 97.1 (4.1) (76.0) (7.9) 3.4 99.7 232.9 183.9 Adjustments: + Gain on Sale of Asset (8.9) (5.9) (1.8) - (1.3) (10.9) - (5.6) (6.6) (21.6) + Pension Curtailment Gain (8.9) -

  39. Slide 39: Reconciliation of Gross Margin and Inventory Turns

    Reconciliation of Gross Margin and Inventory Turns ($mm, unless otherwise noted) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 Revenue 2,804.0 2,782.7 2,763.5 2,862.4 2,243.5 2,096.5 2,189.4 3,302.0 5,780.5 5,908.9 Cost of Goods Sold² 2,178.0 2,156.9 2,131.6 2,292.7 1,891.6 1,729.8 1,830.4 2

  40. Slide 40: Reconciliation of Return on Invested Capital

    Reconciliation of Return on Invested Capital ($mm, unless otherwise noted) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 FIFO EBIT² 102.6 48.7 90.9 13.5 (84.9) 17.7 31.7 371.2 156.9 356.1 Tax-Effected FIFO EBIT³ 66.7 31.7 59.1 8.8 (55.2) 11.5 20.6 241.3 102.0 231.5 Average Period Short-Term

  41. Slide 41: Business model

    Business model Profit drivers and impact Profit drivers Impacted by Volume Manufacturing economy (tonnage) 2 types of customers 50%-60% OEMs—agreements 40%-50% transactional—spot pricing Gross margins Market conditions (gross profit/ton) Buy and sell negotiations Selling prices Material costs Operat

  42. Slide 42: Hypothetical LIFO vs. FIFO

    Hypothetical LIFO vs. FIFO- Where is the value during a rising price environment? LIFO Methodology FIFO Methodology 1,400 1,400 Period 1 Period 2 Period 1 Period 2 1,200 1,200 1,200 1,200 Gross 200 Profit 1,000 1,000 Gross 1,000 +$0 1,000 400 Profit +$200 200 200 800 800 600 600 1,000 Material Cost

  43. Slide 43: Recent jumps in metal prices

    Recent jumps in metal prices Stainless and Aluminum 4,500 2.1 4,000 1.9 3,500 1.7 3,000 1.5 2,500 1.3 2,000 1.1 1,500 0.9 1,000 0.7 Stainless Aluminum Source: Purchasing Magazine *Spot prices include raw materials' surcharges starting in 1st Quarter 2001 Hot Rolled, Cold Rolled and Plate Prices 850

Ryerson — Investor Presentation (February 2007) on 6ix