Mondelez International, Inc. · NASDAQ:MDLZ

Mondelez International — Technical Presentation (2023)

48 slides from Mondelez International's technical presentation, 2023

  1. Slide 1: Food Safety by Design: Deep Dive into Hygienic Design Value and Risk Assessment

    FOOD SAFETY BY DESIGN: DEEP DIVE INTO HYGIENIC DESIGN VALUE AND RISK ASSESSMENT FOR THE FOOD INDUSTRY

  2. Slide 2: About Today's Session

    ABOUT TODAY’S SESSION • This broadcast is being recorded • Please send any questions you have throughout today’s session using the Q&A panel • Questions will be addressed at the end of the broadcast • If your questions are not answered, please contact us through email • Please be sure to complete th

  3. Slide 3: Moderators and Presenter for Today's Training

    Moderators For Today’s Training ChriS D’ANCONA Craig Sember Supplier Quality Coordinator Quality Program Leader Mondelēz Global Supplier Quality Mondelēz Global Food Safety East Hanover, New Jersey, United States Bournville, United Kingdom Today’s Presenter Dimitri Tavernarakis Global Hygienic Desig

  4. Slide 4: Intro

    INTRO Education: BSc in Mechanical\Industrial Engineering, Mediterranean University of Crete, GR MSc in Industrial automations and robotics, Mediterranean University of Crete, GR Professional journey: ✓ Mediterranean University of Crete, Lecturer – Product Development ✓ Senior Engineer (Facility Des

  5. Slide 5: Objectives for Today's Session

    OBJECTIVES FOr TODAY’S SESSION • Understand the principles of hygienic design for buildings and systems • Recognize the frequent root causes of food safety program failure related to infrastructure • See regulatory and Mdlz requirement changes related to hygienic design

  6. Slide 6: Global Food Industry Regulatory Structure

    GLOBAL FOOD INDUSTRY REGULATORY STRUCTURE Global Food Certified Safety Certifiers Operation Standards WHO, International Farmers and policies Private producers organizations National Regulations Processors and Handlers Enforcements Standards Consumes’ Research and influence Surveillance

  7. Slide 7: Major Factors of Food Safety Breakdown

    MAJOR FACTORS OF FOOD SAFETY BREAK DOWN • Contaminated ingredients and/or water • Inadequate storage • Insufficient processing • Poor hygiene and/or Maintenance • Inadequate cleaning and sanitation • Inappropriately trained personnel of poor supervision

  8. Slide 8: Food Safety and Quality Auditing Requirements

    FOOD SAFETY AND QUALITY AUDITING REQUIREMENTS Facilitate Cleaning Prevent contamination Avoid favourable growth conditions To facilitate access for cleaning With compatible materials, appropriate for the environment, product To minimize areas and surfaces of retention or and cleaning method to preve

  9. Slide 9: HACCP Flow Diagram

    HACCP FLOW DIAGRAM Ee Process Hazard Control Monitor I I I I | I I I I I I I I I I I Mondeléz international © ‘SNACKING MADE RIGHT

  10. Slide 10: Food Safety and Quality Auditing Requirements – BRC Previous V8

    FOOD SAFETY AND QUALITY AUDITING REQUIREMENTS – BRC PREVIOUS V8

  11. Slide 11: Food Safety and Quality Auditing Requirements – BRC New V9

    FOOD SAFETY AND QUALITY AUDITING REQUIREMENTS – BRC NEW V9 Clause Requirements 4.5.1 All water (including ice and steam) used as a raw material in the manufacture of processed food, the preparation of product, hand- washing or for equipment or plant cleaning shall be supplied in sufficient quantity,

  12. Slide 12: Food Safety and Quality Auditing Requirements – BRC New V9

    FOOD SAFETY AND QUALITY AUDITING REQUIREMENTS – BRC NEW V9 Clause Requirements There shall be a documented purchase specification for any new equipment detailing the site requirements for the equipment. This may, for example, include: any relevant legislation • where applicable, requirements for foo

  13. Slide 13: Why Hygienic Design?

    WHY HYGIENIC DESIGN? • Brand Protection • Better Quality • No hold-up • No Recalls • Efficiency • Increased sanitation • Reduced cleaning cycles and overall sanitation cost • Food Safety • Protection against hazards harbored from food and environment • Prevention of hazards created by equipment

  14. Slide 14: Implications of Hygiene in the Supply Chain

    IMPLICATIONS OF HYGIENIC IN THE SUPPLY CHAIN •Wash water •Cleaning and Sanitation Harvesting •Hygiene practices •Hygienic Environment Storage and •Temperature Control Distribution •Validation of Processes •Package integrity Processing •Efficient Cleaning and Sanitation programs and Packaging •Hygien

  15. Slide 15: Efficient Sanitization Design

    EFFICIENT SANITIZATION DESIGN 1. SEE – REACH IT – CLEAN – VALIDATE The most important characteristics of a cleanable equipment is that for cleaning, it is easily adequate accessible everywhere. 2. MATERIAL OF DESIGN • Need to be cleanable. • Compatible with the product that is processed • Compatible

  16. Slide 16: Efficient Sanitization Design

    EFFICIENT SANITIZATION DESIGN 4. EQUIPMENT REDESIGN IS NOT AS EASY AS IMPROVING THE CLEANING INSTRUCTIONS AND THE SANITIZATION SOPS • Beneficial for all personnel who are involved in the maintenance or operating and sanitizing the machine to be fully trained on the best sanitation SOPs for the packh

  17. Slide 17: Weaknesses of Design - Equipment

    WEAKNESSES OF DESIGN - EQUIPMENT UNTRAINED PERSONNEL • Poor knowledge of the equipment’s requirements • Poor knowledge of the equipment’s characteristics • Poor Training of the equipment’s operations BAD ACCESSIBILITY • Blind spots • Complexity • Unsafe MATERIAL OF CONSTRUCTION • Not classed as “for

  18. Slide 18: Influence of Food Product Characteristics

    INFLUENCE OF FOOD PRODUCT CHARACTERISTICS • Dimensions • Form • Stickiness • Moisture • Water activity • Microbial sensitivity

  19. Slide 19: Cleanability: Influence of Surface Characteristics

    CLEANABILITY: INFLUENCE OF SURFACE CHARACTERISTICS

  20. Slide 20: Factors Assist Bacterial Contamination

    FACTORS ASSIST BACTERIAL CONTAMINATION SOIL AND DIRT: • Habitat for many organisms, including pathogens • Soil and dust have been known to increase microbial load in the packhouse environment • Poor cleaning practices can lead to soil build-up on equipment • Different types of soil • Dissolve into a

  21. Slide 21: Biofilm Formation

    BIOFILM FORMATION » Growing bacteria Se Dormant bacteria Biofilm matrix © Biofilm matrix-degrading enzyme %~, @ ADHESION MICROCOLONY MATURATION DISPERSION Reversible adhesion Irreversible adhesion _Biofilm growth leading Detachement signals leading to to biotic or abiotic caused by ECM to 3D structu

  22. Slide 22: Size of Hazards Defines Hygienic Risk

    SIZE OF HAZARDS DEFINES HYGIENIC RISK There is a relationship between the size of the hazard and the degree of hygienic feature that harbors that hazard at a level its s a threat to the consumer

  23. Slide 23: Types of Surfaces in GMP Infrastructures

    TYPES OF SURFACES IN GMP INFRASTRUCTURES Environment NO Food contact but Part of the Machine Potentially Food Contact Product Food Contact Floor

  24. Slide 24: Zones – Link to Zoning Requirements

    ZONES – LINK TO ZONING REQUIREMENTS

  25. Slide 25: Equipment Lifecycle and Cost of Ownership

    EQUIPMENT LIFECYCLE AND COST OF OWNERSHIP • Designed to work for over 20 years • Uptime over 99% • Initial capital of purchase • Ongoing Capital of maintenance • Ongoing capital for sanitation • Hygienically designed equipment are likely to be more expensive but significantly reduce the operation co

  26. Slide 26: "Show Me the Money" of HD

    “ShOW ME ThE MONEY” OF hD 50000.00 Standard HD Annual cost for cleaning Annual cost Initial additional cost of investment Daily (5xdays) $83,200.00 Cost of capital 3.70% Weekly (50 weeks) $16,000.00 labor cost per person per hour $16.00 Biweekly $8,000.00 number of people 4.00 labor hours totat $/hr

  27. Slide 27: Hygienic Design Standards

    HYGIENIC DESIGN STANDARDS Segregation Surfaces and geometries Cleanabiliy HD Requirements: Prevention of Ingress, Growth, Accumulation Materials of construction Accessibility Drainability Mondeléz, International ‘SNACKING MADE RIGHT

  28. Slide 28: Development Multi-Disciplinary Team

    DEVELOPMENT MULTI-DISCIPLINARY TEAM The only way to understand clearly the intended use • Building design and equipment manufacturing • Food safety\Technology requirements • Sanitation Requirements • Legal requirements • Holistic Hazard analysis and risk assessment

  29. Slide 29: Intended Use: Building Considerations

    INTENDED USE: BUILDING CONSIDERATIONS • Food ingredients to be stored in the building • Food Product that is manufactured • The manufacturing process • Segregation and zoning internal and external • Environmental air management • Drainage • Flow patterns (Ingredients, product, people, waste, air) •

  30. Slide 30: Intended Use: Equipment Considerations

    INTENDED USE: EQUIPMENT CONSIDERATIONS • Functions and processes that the equipment undertakes • Raw food and ingredients which will be handled and their characteristics • The nature of the final finish of the product (RTE, 2B cookes, ingredient) • The position of the equipment in the process (low,

  31. Slide 31: Risk Assessment

    RISK ASSESSMENT Probability Chances to occur Time A Highly Probable 90 - 100% ...1-6 months B Probable 50 - 90% ...6-24 months C Unlikely 10 - 50% …2-25 years D Almost Impossible 0-10% > 25 years Severity Severity Severe illness, permanent disability ultimately leading to 4 4 fatality(-ies) 3 4 5 6

  32. Slide 32: HD Risk Assessment Flowchart

    HD RISK ASSESSMENT FLOWCHART

  33. Slide 33: Hygiene Levels – Industry Practice

    HYGIENE LEVELS – INDUSTRY PRACTICE Category of equipment based on their intended use

  34. Slide 34: Manufacturing and Maintenance - GMP

    MANUFACTURING AND MAINTENANCE - GMP • Housekeeping • Hygienic handling and storage • Avoid cross contamination of materials • Traceability of BOM • Project development records keeping • All spare parts shall remain packed until their use and never mix black steel with stainless steel components. • P

  35. Slide 35: Hygienic Building Design Best Practices and Principles

    HYGIENIC BUILDING DESIGN BEST PRACTICES AND PRINCIPLES

  36. Slide 36: Intended Use: Building Considerations

    INTENDED USE: BUILDING CONSIDERATIONS • Food ingredients to be stored in the building • Food Product that is manufactured • The manufacturing process • Segregation and zoning internal and external • Environmental air management • Drainage • Flow patterns (Ingredients, product, people, waste, air) •

  37. Slide 37: 7 Key Design Principles

    7 KEY DESIGN PRINCIPLES • Principle #0: General • Principle #4: Location • Principle #1: Segregation • Principle #5: Circulation • Principle #2: Fabrication • Principle #6: Ancillary Utilities − General − General − Foundations − Environmental Air, Ventilation and − Structural Framework Compressed Ai

  38. Slide 38: Segregation

    SEGREGATION All food processing operations shall be designed in a way in which the risk of contamination of the product by any hazard is minimized. Segregation shall be maintained between: - Dry and wet areas and processes. - Personal, production, warehouse and storage areas. - Production utilities

  39. Slide 39: Segregation

    SEGREGATION ➢ Physical separation of Ready to Eat and Raw or Allergen and non-Allergen areas (preferably) by means of walls and doors. As well as the flow of the Air and the drainage. ➢ Separate locker and lunch rooms for employees working in these separated areas. ➢ Traffic patterns not become a so

  40. Slide 40: Segregation

    SEGREGATION Canteen Locker room Entrance Cross over

  41. Slide 41: Circulation

    CIRCULATION All food operations shall be performed in a way in which the risk of contamination of the product by any hazard is minimized. Circulation control ensures that flow of: • Personnel between movement different areas/zones • Ingredient and product movement. • Environment air flow patterns •

  42. Slide 42: Circulation

    CIRCULATION Medium Care High Care Transfer area Other area Canteen Kitchen ‘Showers/lockers/ toilets/changing rooms - male Showers/lockers/ toilets/changing rooms - female Laboratory Administration Reception > Hand washing Showers/lockers/ toilets/changing Showers/lockers/ toilets/changing facilitie

  43. Slide 43: Room Air Quality Overview

    ROOM AIR QUALITY overview Temperature, humidity, relative room pressures and filtration efficiencies shall be implemented & maintained to minimize the potential for microbial cross contamination- refer to SQE HACCP & Zoning requirements Control of Moisture & Temperature PREVENT MICROBIAL Proper Air

  44. Slide 44: Air Flow Schematic Diagram

    AIR FLOW SCHEMATIC DIAGRAM Fig. 7.1 Schematic diagram of air movement route. Ensure free passage of = ’ H airatinlet | = : filter unit ene oceex! i. : Filtered air air | ‘Measure ( Ousie J supply under supply ! differential air pressure ‘ ‘pressure [os FX = al rye eye FyA aAy Food process ‘ Low care

  45. Slide 45: Air Quality Requirements Linked to Zoning

    Air quality requirements linked to zoning From Mdlz Supplier Quality Expectations section 6.4. Tables from upcoming SQE version 2023 shown. Table 6.4.4 Minimum Requirements for Environmental Air and Low-pressure Air Used in Direct Product Contact RMAT Pack 6.4.4 Non-manufacturing Raw Zone / (non-GMP

  46. Slide 46: Common Hygienic Design Infrastructure Findings

    COMMON HYGIENIC DESIGN INFRASTRUCTURE FINDINGS Most infrastructure nonconformities cited during Mondelēz supplier audits are related to SEGREGATION, FABRICATION and the MAINTENANCE of the facility. Common issues include: WALLS DRAINS • Openings/gaps in exterior walls and between • Open floor drains

  47. Slide 47: Key Takeaways

    KEY TAKEAWAYS • Identify the food safety hazards of the product • Assess the risk of the hazards and agree as a team with food safety on the criticality • Discuss and understand how the facility operates (production, sanitation and maintenance) • Conduct HD risk assessment following the principal ru

  48. Slide 48: Thank You! Q&A

    THANK YOU! Q&A Please complete the quiz and survey for today’s training by scanning the QR code or using the link provided. We value your feedback! https://forms.office.com/r/G3bFV4ucw4

Mondelēz International — Technical Presentation (2023) on 6ix