Bharat Heavy Electricals Limited · NSE:BHEL
Bharat Heavy Electricals — Technical Presentation
14 slides from Bharat Heavy Electricals's technical presentation
Slide 1: Presentation on Ballast cleaning machine (BCM)
Presentation on Ballast cleaning machine (BCM) ( ) Locomotive Engineering
Slide 2: Ballast Cleaning Machine
Ballast Cleaning Machine BCM being manufactured by BHEL Jhansi,, Comprises p mainly y of two parts: a ) Power Car a.) b.) Working Unit
Slide 3: Ballast Cleaning Machine (Power Car)
Ballast Cleaning Machine (Power Car) Power car comprises p of one no. KTA 38L Cummins make diesel engine.(1120 hp). Traction Alternator TA 6301AZ Twin Impeller Blower 10000cfm Aux. A generator t AG2513 IR make Compressor model 15T. Screw Coupler with hook. Roof mounted radiator with fa
Slide 4: Propore
Propore “
Slide 5: Slide 5
Slide 6: Ballast Cleaning Machine: Screening Unit
Ballast Cleaning Machine Screening Unit: Unit: Has steel wire and the shape p of aperture p is square. q Vibration of screen is caused by two elect motors with eccentric wheels. wheels Fixed at 25deg longitudinal slope.
Slide 7: Ballast Cleaning Machine: Lifting Unit
Ballast Cleaning Machine Lifting Unit: Unit: Purpose is for complete g and freeing lifting g from rail bed while enables easier excavation of ballast and keeping the track in geometric position until first required amount of cleaned ballast is put into place. place
Slide 8: Ballast Cleaning Machine: Conveyor belt for excavated materials
Ballast Cleaning Machine Conveyor belt for excavated materials:: The conveyor belt transports materials the ballast from receiving hoppers to the screening units. The whole conveyor belt is fixed to the frame as sliding unit which enables flexibility of the conveyor belt so that even in the full e
Slide 9: Ballast Cleaning Machine: Conveyor belt for Ballast
Ballast Cleaning Machine Conveyor belt for Ballast: Ballast: The y belt transports conveyor p screened ballast from screening unit to the equipment for returning the ballast to the ballast bed.
Slide 10: Ballast Cleaning Machine: Conveyor Belt for Spoil
Ballast Cleaning Machine Conveyor Belt for Spoil: Spoil: Transports the spoil from underneath the screening unit to the swiveling conveyor and is able to transport the spoil along with oversized ballast, when the machine is in full excavation mode. Fixed rigidly to the frame and at the upper end o
Slide 11: Ballast Cleaning Machine: Swiveling Conveyor Belt
Ballast Cleaning Machine S i li Swiveling Conveyor C Belt B lt : The Th conveyor belt transports the spoil to either h into muck k wagons at the h front f of the machine or to the side of the track. This is equipped with safety mechanism (sensors) to prevent the infringement of the parallel tracks
Slide 12: Ballast Cleaning Machine: Placement Unit
Ballast Cleaning Machine Ballast Placement Unit : for optimal placement of cleaned ballast back to rail bed under the rail bed in both plain track and points crossing. The unit consists of front and rear ballast divider, satellite conveyor and lateral conveyor. This equipment is placed on a satell
Slide 13: Ballast Cleaning Machine: Front Divider
Ballast Cleaning Machine Front Divider: Divider: receives the ballast from the conveyory and places p the ballast under the rails via outside of the rails. rails This is the first pouring pouring. In case of excess ballast at pouring , it is placed on the satellite conveyor conveyor.
Slide 14: Ballast Cleaning Machine: Satellite Conveyor and Rear Divider
Ballast Cleaning Machine Th satellite The lli conveyor transports excess ballast to the rear divider. Rear Divider: The rear divider receives the ballast from the conveyor and places the ballast at the center of the track. In the event there is excess of ballast at this pouring , it is placed on