Jash Engineering Ltd. · NSE:JASH

Jash Engineering — Technical Presentation (September 2022)

43 slides from Jash Engineering's technical presentation, September 2022

1. Slide 1: Product Presentation: Knife Gate Valves, Bulk Solids Handling Valves

   PRODUCT PRESENTATION KNIFE GATE VALVES BULK SOLIDS HANDLING VALVES

2. Slide 2: About Jash Solid Product Group

   ABOUT JASH Solid Product Group ➢ Established in the year 1972 ➢ Products : • Water Control Gates • Mechanized Fine & Coarse bar screens • Water hammer control devices • Bulk material handling valves • Screw conveyors • Screw Generators and Pumps • Disc filters ➢ Markets : • India, Singapore, Malaysi

3. Slide 3: Manufacturing Units

   MANUFACTURING UNITS Solid Product Group Unit 1, Indore with built up area spanning over 125,000 Sq. feet Unit 2, Indore with built up area spanning over 155,000 Sq. feet Unit 3 and 4, SEZ, Pithampur with built up area spanning over 100,000 Sq. feet 3

4. Slide 4: Solid Product Group

   SOLID PRODUCT GROUP Solid Product Group ➢ Product categories : • Knife gate valves • Bulk solid handling valves ➢ Knife gate valves : • Model: ZFI (Unidirectional) • Model: ZFI-BD (Bidirectional) • Model: MONO (Partial bidirectional) ➢ Bulk solid handling valves : • Model: ZFB • Model: KU (Swing gat

5. Slide 5: What is Knife Gate Valve?

   WHAT IS KNIFE GATE VALVE? Solid Product Group Knife Gate Valve is used to slice through sludge or sewerage and a gate is used for normal positive shut off. It is a gate valve design that is distinguished from the standard design by the use of a simple metal plate for the gate. Knife gate valve can b

6. Slide 6: Model: ZFI

   JASH Schutte MODEL: ZFIl

7. Slide 7: ZFI Knife gate valves series nomenclature

   MODEL: ZFI Knife gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI SS / WCB Resilient seated with replaceable 1 C-201 C-211 metallic band. 2 Integral metal seated. C-202 C-212 Resilient seated with replaceable 3 C-203 C-213 metallic ring. Metal seated with replaceable 4 C-204 C-214 metall

8. Slide 8: ZFI Knife gate

   MODEL: ZFI Knife gate valves PRODUCT DESCRIPTION 8

9. Slide 9: ZFI Knife gate

   MODEL: ZFI Knife gate valves PRODUCT DESCRIPTION 9

10. Slide 10: ZFI Knife gate

    MODEL: ZFI Knife gate valves PRODUCT DESCRIPTION 10

11. Slide 11: ZFI Knife gate

    MODEL: ZFI Knife gate valves PRODUCT DESCRIPTION 11

12. Slide 12: ZFI-BD Knife gate

    MODEL: ZFI-BD Knife gate valves PRODUCT DESCRIPTION 12

13. Slide 13: Model: MONO

    JASH Schutte MODEL: MONO

14. Slide 14: MONO Knife gate valves series nomenclature

    MODEL: MONO Knife gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI SS Resilient seated with replaceable 1 C-102 C-112 metallic ring. 14

15. Slide 15: MONO Knife gate valves parts nomenclature

    MODEL: MONO Knife gate valves Parts Nomenclature : 15

16. Slide 16: MONO Knife gate valves parts nomenclature

    MODEL: MONO Knife gate valves Parts Nomenclature : Series C-102, C-112 16

17. Slide 17: MONO Knife gate

    MODEL: MONO Knife gate valves PRODUCT DESCRIPTION 17

18. Slide 18: Model: ZFB

    JASH Schutte MODEL: ZFB

19. Slide 19: ZFB Slide gate valves series nomenclature

    MODEL: ZFB Slide gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI WCB / SS Resilient seated with replaceable 1 C-601 C-611 metallic ring. Inflatable seal with replaceable 2 C-602 C-612 metal ring. 19

20. Slide 20: ZFB Slide gate

    MODEL: ZFB Slide gate valves PRODUCT DESCRIPTION 20

21. Slide 21: ZFB Slide gate: seat sealing arrangement

    MODEL: ZFB Slide gate valves PRODUCT DESCRIPTION Seat sealing arrangement: Series C-601, C-611 - Soft seated design for low pressure application. • Wiper type rubber peripheral face seal to scrape powdery material from gate during opening. • Seal designed for easy replacement at site with minimum ef

22. Slide 22: ZFB Slide gate: guide arrangement

    MODEL: ZFB Slide gate valves PRODUCT DESCRIPTION Guide arrangement: Series C-601, C-611 - • Externally adjustable gate guides to support the gate in closed condition of the valve and control the leakage across the gate. • Large internal space around and above the seal face enables full closure of ga

23. Slide 23: ZFB Slide gate: cross seal and encapsulation box

    MODEL: ZFB Slide gate valves PRODUCT DESCRIPTION Cross seal and encapsulation box: Series C-601, C-611 - • Cross seal housed in cartridge with a pusher. This enables to adjust the tightness of gland packing onto the gate after a prolonged use. • Encapsulation box to prevent the powdery material leak

24. Slide 24: ZFB Slide gate

    MODEL: ZFB Slide gate valves PRODUCT DESCRIPTION 24

25. Slide 25: Model: KU-STD

    JASH Schutte MODEL: KU-STD

26. Slide 26: KU-STD Swing gate valves series nomenclature

    MODEL: KU-STD Swing gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI WCB / SS 1 Resilient seated with viper seal. C-301 C-311 26

27. Slide 27: KU-STD Swing gate

    MODEL: KU-STD Swing gate valves PRODUCT DESCRIPTION 27

28. Slide 28: KU-STD Swing gate

    MODEL: KU-STD Swing gate valves PRODUCT DESCRIPTION • Unidirectional valve with peripheral face sealing. • Soft seated wiper type sealing system. • Swinging operation of gate, Opening / closing < 3 seconds. • Zero seat leakage at 1 bar. • No leakage to environment. • Encapsulated gate operation, no

29. Slide 29: Model: KU-HT

    JASH Schutte MODEL: KU-HT

30. Slide 30: KU-STD Swing gate valves series nomenclature

    MODEL: KU-STD Swing gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI SS 1 Integral / replaceable metal seat. - C-312 30

31. Slide 31: KU-HT Swing gate

    MODEL: KU-HT Swing gate valves PRODUCT DESCRIPTION 31

32. Slide 32: Model: KU-PAM

    JASH Schutte MODEL: KU-PAM

33. Slide 33: KU-PAM Swing gate valves series nomenclature

    MODEL: KU-PAM Swing gate valves SERIES Nomenclature : Sr. No. Valve Type CI / DI WCB / SS 1 Integral / replaceable metal seat. C-303 C-313 33

34. Slide 34: KU-PAM Swing gate

    MODEL: KU-PAM Swing gate valves PRODUCT DESCRIPTION 34

35. Slide 35: Model: DFG

    JASH Schutte MODEL: DFG

36. Slide 36: DFG Double flap valves series nomenclature

    MODEL: DFG Double flap valves SERIES Nomenclature : Sr. No. Valve Type CI / DI WCB / SS Metal seat with replaceable cone 1 C-401 and flapper. Metal seat with replaceable cone 2 C-402 and flapper. 36

37. Slide 37: DFG Double flap

    MODEL: DFG Double flap valves PRODUCT DESCRIPTION 37

38. Slide 38: DFG Double flap

    MODEL: DFG Double flap valves PRODUCT DESCRIPTION 38

39. Slide 39: DFG Double flap

    MODEL: DFG Double flap valves PRODUCT DESCRIPTION • Seat and flapper made of EN8 hardened material to withstand abrasion and ensure long life. • Mating faces of seat and flappers lapped to a high accuracy for improved leak tight performance. • Replaceable type seat and flapper to prevent replacement

40. Slide 40: Model: VEG

    JASH Schutte MODEL: VEG

41. Slide 41: VEG Slide gate valve series nomenclature

    MODEL: VEG Slide gate valve SERIES Nomenclature : Sr. No. Valve Type MS SS Integral metal seat / resilient seat, 1 C-531 C-541 inflatable seat as optional. 41

42. Slide 42: VEG Slide gate valve product description

    MODEL: VEG Slide gate valve PRODUCT DESCRIPTION 42

43. Slide 43: Creating a sustainable environment Worldwide!

    Creating a sustainable environment ……… Worldwide ! JASH ENGINEERING LTD RODNEY HUNT INC JASH USA INC MAHR MASCHINENBAU GMBH SHIVPAD ENGINEERS PVT LTD. ENGINEERING & MANUFACTURING JASH LTD. 31, Sector-C, Industrial Area, 158 Gov Dukakis Drive, 4800 Sugar Grove Blvd, # 602, Kupferschmiedgass 8, 3/86-E

Jash Engineering — Technical Presentation (September 2022) on 6ix