Silvaco Group, Inc. · NASDAQ:SVCO

Silvaco — Technical Presentation (July 2011)

55 slides from Silvaco's technical presentation, July 2011

  1. Slide 1: VICTORY PROCESS

    VICTORY PROCESS Full Physical 3D Semiconductor Simulator

  2. Slide 2: VICTORY Process – 3D Process Simulator

    VICTORY Process – 3D Process Simulator  VICTORY Process provides the capability to simulate comprehensive full process flows  Etching, Deposition, Lithography  Oxidation, Stress  Implantation  Diffusion  Self explanatory process flow description  Based on ATHENA syntax  Open interface for mo

  3. Slide 3: VICTORY Process – Numerics

    VICTORY Process – Numerics  Level set based framework  for structure representation and  for interface propagation  Very stable surface propagation algorithms  Important for Etching, Deposition, Oxidation  Based on the multi-layer structure concept  Automatic void detection  Avoids the probl

  4. Slide 4: VICTORY Process – Meshes

    VICTORY Process – Meshes  VICTORY Process uses two types of meshes  Hierarchical Cartesian mesh for implicit geometry representation  Irregular Cartesian mesh for volume data representation  Doping, Stress, .....  Manual and automatic mesh refinement  Manual refinement of the geometry mesh  A

  5. Slide 5: Etching/Deposition/Lithography

    VICTORY Process – Etching/Deposition/Lithography  Comprehensive mask support  GDSII – format masks  lay – format masks (MaskViews)  Definition of mask polygons inside the processing deck  Mask variations via the deck (shrink and expand)  Selection of a simulation window  Lithography  Calcula

  6. Slide 6: Etching/Deposition/Lithography (con’t) – Geometrical Etching

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Geometrical Etching  Idealized directional mask pattern or image transfer  Pattern transfer with tilted sidewalls and rounded corners  Idealized isotropic, dry and directional etching  Selective and non-selective mode  Fast structure pr

  7. Slide 7: Etching/Deposition/Lithography (con’t) – Geometrical Deposition

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Geometrical Deposition  Idealized vertical resists or material regions defined by a mask  Idealized conformal deposition  Deposition of features with tilted sidewalls and rounded corners  Planarisation mode to partially fill holes Full P

  8. Slide 8: Etching/Deposition/Lithography (con’t) – Geometrical CMP

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Geometrical CMP  Idealized planarization  Selective and non-selective mode Non-Selective Selective Full Physical 3D Semiconductor Simulator -8-

  9. Slide 9: Etching/Deposition/Lithography (con’t) – Physical Etching

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Physical Etching  Selective etching of several materials  Comprehensive set of default models  Selective Etching  Isotropic, An-isotropic, Directional  Crystal orientation dependent  Plasma Etching  Ion-Milling  Material dependent yi

  10. Slide 10: Ion milling with re-deposition

    VICTORY Process – Etching/Deposition/Lithography (con’t) Ion milling with re-deposition Full Physical 3D Semiconductor Simulator - 10 -

  11. Slide 11: Etching/Deposition/Lithography (con’t) – Physical Deposition

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Physical Deposition  Comprehensive set of default models  Conformal Deposition  Non-conformal Deposition  Directional Deposition  Selective Deposition  Empirical epitaxial growth  Ion beam deposition  User accessible yield functions

  12. Slide 12: Ion beam deposition with tilted beam

    VICTORY Process – Etching/Deposition/Lithography (con’t) Ion beam deposition with tilted beam Full Physical 3D Semiconductor Simulator - 12 -

  13. Slide 13: Physical Etching and Deposition - Open modeling system

    VICTORY Process – Etching/Deposition/Lithography (con’t)  Physical Etching and Deposition - Open modeling system  C-Interpreter based  User definable surface reaction ( surface reaction model )  Determines how the local etch rate is calculated  User definable transport characteristics ( flux mo

  14. Slide 14: Modes for Flux Calculation

    Modes for Flux Calculation Primary-Ballistic Mode:  Reactants are approaching from the reactor only  The velocity distribution function is a modelling function definable by the user (C-Interpreter) Full Physical 3D Semiconductor Simulator - 14 -

  15. Slide 15: Modes for Flux Calculation (con’t)

    Modes for Flux Calculation (con’t) Reflective-Ballistic Mode:  Reactants are approaching from the reactor and are also emitted from the surface (either due to reflection or reaction)  The primary distribution and the emission distribution are modelling functions definable by the user (C-Interprete

  16. Slide 16: Modes for Flux Calculation (con’t)

    Modes for Flux Calculation (con’t) Rate-Coupled-Reflective-Ballistic Mode:  Reactants are approaching from the reactor and are also emitted from the surface  The amount of particles emitted from the surface is a function of the rate (e.g. re-deposition)  The primary distribution and the emission

  17. Slide 17: Ion Implantation – Analytical

    VICTORY Process – Ion Implantation – Analytical  Analytical and Monte-Carlo method for ion implantation  Analytical method uses a well established database for a wide range of implantation conditions  Gaussian profiles, Pearson profiles and Dual Pearson profiles  User definable profiles  By mea

  18. Slide 18: Ion Implantation – Monte-Carlo

    VICTORY Process – Ion Implantation – Monte-Carlo  Monte Carlo method is more appropriate  For complex geometries  For large tilted implants because many effects cannot be accounted for by even the most elaborated analytical procedure  Monte Carlo method takes into account all important implantat

  19. Slide 19: Ion Implantation – Monte-Carlo (con‘t)

    VICTORY Process – Ion Implantation – Monte-Carlo (con‘t)  Is completely physically based  Uses best available electronic and nuclear stopping models  Acceleration techniques  Trajectory splitting  High performance due to efficient multi-threading Full Physical 3D Semiconductor Simulator - 19 -

  20. Slide 20: Ion Implantation – Monte-Carlo (con‘t)

    VICTORY Process – Ion Implantation – Monte-Carlo (con‘t) Implant at tilt 50 degrees and twist along structure’s diagonal.  5 million trajectories can be simulated in a few minutes on an 8 core machine Full Physical 3D Semiconductor Simulator - 20 -

  21. Slide 21: Ion Implantation – Monte-Carlo (con‘t)

    VICTORY Process – Ion Implantation – Monte-Carlo (con‘t) Ion distribution in silicon Primary, i.e. direct impact implantation Shadowed, i.e. secondary impact implantation Implant at tilt 50 degrees and twist along structure’s diagonal.  All geometrical effects are taken into account Full Physical 3

  22. Slide 22: Annealing/Diffusion

    VICTORY Process – Annealing/Diffusion  Based on an Open Modeling System  PDE system is extendable by the user  Modelling species can be added  Reactions between species can be extended and modified  Comprehensive set of default models  Direct, Fermi, Five-stream, Single-Pair  Dopant activatio

  23. Slide 23: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Very efficient multi-threading  High multi-core performance gain  Finite difference scheme is applied to discretize the PDE‘s  Solved on a Cartesian mesh  Guarantees high performance and high stability  Irregular Cartesian mesh is used to facilita

  24. Slide 24: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t) Mesh for annealing simulation Material boundary with interface nodes Structured nodes Full Physical 3D Semiconductor Simulator - 24 -

  25. Slide 25: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Diffusion - Open Modeling System :  Definition of the PDE system is done via a C-Interpreter model  Species can be added  PDE’s can be defined for the new species  Reactions with other species can be defined  All default models can be accessed and

  26. Slide 26: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Default models :  Direct model  Fermi model Full Physical 3D Semiconductor Simulator - 26 -

  27. Slide 27: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Default models :  Five-Stream model All model species are defined in a C-Interpreter model file Full Physical 3D Semiconductor Simulator - 27 -

  28. Slide 28: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Default models :  Five-Stream model Reactions are defined in a C-Interpreter model file Full Physical 3D Semiconductor Simulator - 28 -

  29. Slide 29: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Default models :  Five-Stream model Stream functions are defined in a C-Interpreter model file Full Physical 3D Semiconductor Simulator - 29 -

  30. Slide 30: Annealing/Diffusion (con‘t)

    VICTORY Process – Annealing/Diffusion (con‘t)  Default models :  Single-Pair model  Simplification of the Five-Stream model where one dopant defect-pair is neglected  Special model variant for interstitial supersaturation where only dopant- interstitial pairs are taken into account  Is about 30

  31. Slide 31: Implant/Diffusion – Annealing/Diffusion (con‘t)

    Implant/Diffusion – Annealing/Diffusion (con‘t) After 10 minutes annealing After Monte-Carlo Implantation • 950 C • Fermi Model Annealing simulation only takes few minutes  Simulation time scales with the complexity of the model and with the number of nodes Full Physical 3D Semiconductor Simulator

  32. Slide 32: Oxidation/Stress

    VICTORY Process – Oxidation/Stress  Numerically very demanding process:  Involves different processes  Oxygen diffusion  Chemical reaction: Si + O2 = SiO2  Material deformation  Processes are interlinked  Diffusion and reaction depend on oxide flow (via stresses)  Oxide flow depends on diffu

  33. Slide 33: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Oxidation step is represented as a succession of four sub-steps :  Diffusion of oxygen through the oxide (1. sub-step)  Solving diffusion equation  Reaction at SiO2/Si interface (2. sub-step)  Volume expansion  Calculating reactive interface velocity

  34. Slide 34: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Oxygen transport models (1. sub-step) :  Obtains the oxygen concentration in oxide Volume equation : Boundary conditions (oxygen flux across interfaces) : (supply) (reaction) Full Physical 3D Semiconductor Simulator - 34 -

  35. Slide 35: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Oxygen transport models (1. sub-step) :  Linear transport model : .... Oxygen diffusivity .... Reaction coefficient .... Transport coefficient Full Physical 3D Semiconductor Simulator - 35 -

  36. Slide 36: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Deformation models (3. sub-step) :  Obtains the deformation velocity of all materials above the reactive surface  Solution variables : Full Physical 3D Semiconductor Simulator - 36 -

  37. Slide 37: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Deformation models (3. sub-step) :  Linear incompressible viscous flow model :  Viscoelastic term is neglected (assumes infinite shear modulus G) Full Physical 3D Semiconductor Simulator - 37 -

  38. Slide 38: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Oxygen transport, material flow and moving boundary problem are solved on the same Cartesian mesh  High stability  Special boundary nodes are added to implement proper boundary conditions (special method developed in-house) Introduce cross-points with t

  39. Slide 39: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t)  Multiple operational modes  Analytical mode  Obtains a requested thickness of oxide  Empirical mode  For very thin oxides in rather large simulation domains  Thickness is obtained on the basis of the Massoud model  Full physical mode  Full solution

  40. Slide 40: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t) LOCOS: Long simulations are stable without meshing issues. Full Physical 3D Semiconductor Simulator - 40 -

  41. Slide 41: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t) Buffered field oxidation STI liner oxidation Simulation is stable for complex structures (Multi-layer concept). Full Physical 3D Semiconductor Simulator - 41 -

  42. Slide 42: Oxidation/Stress (con‘t)

    VICTORY Process – Oxidation/Stress (con‘t) Trench oxidation : Complex tensile and compressive stress near corners can be analyzed Full Physical 3D Semiconductor Simulator - 42 -

  43. Slide 43: Interface to VICTORY Device

    VICTORY Process – Interface to VICTORY Device  A special device meshing engine is used to export structures to VICTORY Device  Provides comprehensive automatic and manual mesh adaptation features  Refinement boxes Full Physical 3D Semiconductor Simulator - 43 -

  44. Slide 44: Interface to VICTORY Device

    VICTORY Process – Interface to VICTORY Device  A special device meshing engine is used to export structures to VICTORY Device  Provides comprehensive automatic and manual mesh adaptation features  Refinement boxes  Control of mesh density near interfaces Full Physical 3D Semiconductor Simulator

  45. Slide 45: Interface to VICTORY Device

    VICTORY Process – Interface to VICTORY Device  A special device meshing engine is used to export structures to VICTORY Device  Provides comprehensive automatic and manual mesh adaptation features  Refinement boxes  Control of mesh density near interfaces  Adaptive refinement according to doping

  46. Slide 46: Interface to VICTORY Device

    VICTORY Process – Interface to VICTORY Device  A special device meshing engine is used to export structures to VICTORY Device  Structure mirroring capability  Process simulation can make use of any geometrical symmetry  Allows for faster process simulation of symmetrical devices Full Physical 3D

  47. Slide 47: Applications: Re-Oxidation - STRESS

    Applications: Re-Oxidation - STRESS Full Physical 3D Semiconductor Simulator - 47 -

  48. Slide 48: Applications: Re-oxidation – Regions

    Applications: Re-oxidation – Regions Full Physical 3D Semiconductor Simulator - 48 -

  49. Slide 49: Applications: Re-oxidation – Stresses in Oxide

    Applications: Re-oxidation – Stresses in Oxide Full Physical 3D Semiconductor Simulator - 49 -

  50. Slide 50: Applications: Planar MOS Technology

    Applications: Planar MOS Technology Arsenic profile Boron profile Phosphorus profile Full Physical 3D Semiconductor Simulator - 50 -

  51. Slide 51: Applications: FinFET

    Applications: FinFET Full Physical 3D Semiconductor Simulator - 51 -

  52. Slide 52: Applications: Tri-gate FET with Contact Area

    Applications: Tri-gate FET with Contact Area Donor profile Acceptor profile Full Physical 3D Semiconductor Simulator - 52 -

  53. Slide 53: Applications: MEMS Cantilever Structure

    Applications: MEMS Cantilever Structure Full Physical 3D Semiconductor Simulator - 53 -

  54. Slide 54: Current Development

    Current Development  Stress-dependent viscous oxidation  Performance improvement of the oxidation module  Extended default set of diffusion models  Extended default set of etching and deposition models  Improvement of the device meshing export Full Physical 3D Semiconductor Simulator - 54 -

  55. Slide 55: Conclusion

    Conclusion  VICTORY Process is the next generation tool for the investigation of 3D process and device effects  Suitable for many semiconductor technologies such as  Planar MOS, FinFET, Power devices  Sensor and LED’s,  MEMS and  Complex quantum structures  Also suitable for non-semiconductor

Silvaco — Technical Presentation (July 2011) on 6ix