SolarEdge Technologies, Inc. · NASDAQ:SEDG

SolarEdge Technologies — EU PVSEC (September 2010)

26 slides from SolarEdge Technologies's conference presentation, Sep 8, 2010

  1. Slide 1: Field Results of Energy Maximizing Distributed DC Topology – Residential & Commercial Installations

    Field Results of Energy Maximizing Distributed DC Topology – Residential & Commercial Installations John Berdner, SolarEdge General Manager for North America 8. September, 2010 1

  2. Slide 2: Energy Loss Factors in Traditional PV Systems

    Energy Loss Factors in Traditional PV Systems System Energy Loss Design Energy Loss  Module mismatch  Limited roof utilization due to design constraints  Partial shading  Undervoltage/Overvoltage Indirect Energy Loss  Dynamic weather MPPT loss  No module level monitoring ©2010 SolarEdge 2

  3. Slide 3: SolarEdge System Overview

    SolarEdge System Overview  Module level optimization  Module level monitoring  Fixed voltage - ideal installation  Enhanced safety solution Power Optimizer Inverter Monitoring Server Internet Monitoring Portal ©2011 SolarEdge 3

  4. Slide 4: SolarEdge Distributed Technology

    SolarEdge Distributed Technology  ASIC-based Power Optimizers achieve:  Per-module Maximum Power Point Tracking (MPPT)  Efficiency: 98.8% EU weighted (99.5% peak)  Conversion modes: buck, boost and buck/boost  Wide module compatibility: 5v-125v, up to 400w  Power Line Communication transceiver

  5. Slide 5: Fixed String Voltage - Enabler

    Fixed String Voltage - Enabler String voltage is always fixed, regardless of temperature and string length  Flexible design for increased roof utilization: ⁻ Parallel strings of unequal lengths ⁻ Modules on multiple roof facets ⁻ Modules with different power ratings ⁻ Modules of different technolog

  6. Slide 6: Field Trials and Results

    Field Trials and Results 6 ©2010 SolarEdge

  7. Slide 7: Roof Utilization Case Study – Israel

    Roof Utilization Case Study – Israel  Optimal roof space utilization enabled a 15kW residential installation  Four facets covered  Unmatched modules in each string were necessary:  Different module sizes (and rating)  Different tilt and azimuth  25 Suntech 280W modules  34 Suntech 210W module

  8. Slide 8: Roof Utilization Case Study – Results

    Roof Utilization Case Study – Results  Module-level monitoring reveals:  No mismatch losses (module-level MPPT)  No string mismatch losses (length agnostic fixed string voltage)  Attractive 5.1 kWh/kWp per day during August (compared to 5.5 for South-only sites) 280w 280w West East 210w 210w Wes

  9. Slide 9: Comparative Energy Case Study Methodology

    Comparative Energy Case Study Methodology  Side by side energy comparisons under similar conditions:  Standard inverter compared to distributed system  Both systems subjected to:  Identical total DC capacity (otherwise comparing kWh/kWp)  Identical module tilt and orientation  Identical irradi

  10. Slide 10: Comparative Case Study 1 - Italy

    Comparative Case Study 1 - Italy  Power optimizers + SE5000 compared to four traditional inverters of various brands (5kW, 5kW, 3kW, 6kW)  Comparison without shading, and with simulated shading.  Experiments done by Albatech, a MetaSystem Group company, an Italian MW-scale turn-key integrator, an

  11. Slide 11: Case Study 1 – Unshaded Results

    Comparative Case Study 1 – Unshaded  Under unshaded conditions distributed system produced 2.3% - 6.4% more energy than the traditional inverters Energy Production 06-15 July 2010 60.00 50.00 Power Optimizers 40.00 kWh 30.00 + SE5000 20.00 10.00 0.00 11 ©2010 SolarEdge

  12. Slide 12: Comparative Case Study 1 – Shaded

    Comparative Case Study 1 – Shaded  A cardboard panel was used to simulate a chimney-like sliding shadow on 1-2 modules in each string with a distributed system and inverter A  The best performing inverter of three other un-shaded traditional inverters was used as a reference SolarEdge Inverter A D

  13. Slide 13: Case Study 1 – Shaded Results

    Comparative Case Study 1 – Shaded (Cont.)  In reference to the unshaded inverter: The distributed system recovered more than 50% of the energy lost by traditional inverter A due to shading (-4% vs. to -8.63%) Shaded Unshaded 6.00 5.65 5.43 5.00 5.20 5.21 5.27 4.00 Power Optimizers kWh 3.00 2.00 + S

  14. Slide 14: Comparative Case Study 2 – Czech Republic

    Comparative Case Study 2 – Czech Republic  Power optimizers + SE5000 compared to 5kW inverter of a leading brand  Each inverter connected to 2 strings x 12 AWS modules x 185w = 4.4kWp  Three partly shaded modules in each string of each system  A third system remains unshaded for reference  Test

  15. Slide 15: Case Study 2 – Results

    Comparative Case Study 2 – Results  The distributed system produced 30.3% more energy than the traditional inverter (58.96 kWh vs. 45.25 kWh)  In reference to the unshaded inverter, the distributed system recovered 77% of the energy lost by the traditional inverter due to shading (6.5% loss vs. 28

  16. Slide 16: Comparative Case Study 3 - Germany

    Comparative Case Study 3 - Germany  Power optimizers + SE5000 compared to traditional 5kW inverter with multiple MPP trackers  2 string x 12 and 13 Solon P210 modules x 210w = 5.25kWp  A section inside a large scale PV field  No shading 16 ©2010 SolarEdge

  17. Slide 17: Comparative Case Study 3 - Results

    Comparative Case Study 3 - Results  The distributed system produced 1.65% more energy than the traditional inverter  On days with dynamic weather conditions, distributed module-level MPPT recovers energy otherwise lost due to delayed MPPT process Power Module-level MPPT energy Power Optimizers + S

  18. Slide 18: The Impact of Dynamic Weather Conditions

    The Impact of Dynamic Weather Conditions  As shown in comparative case study 3, moving clouds induce rapid fluctuations in irradiance level  Centralized inverters are Sep 2nd 2010 more limited in their ability to track changes in Imp as fast as they occur, compared to module-level MPP trackers 10:

  19. Slide 19: Comparative Case Study 4 – Germany

    Comparative Case Study 4 – Germany  Power optimizers + SE5000 compared to traditional 5kw inverter with several MPP trackers  2 strings x 9 Trina TSM220 modules x 220w = 3.96kWp  Artificial shading simulating commercial layout inter-row shading covers 0.5% of the PV array ©2010 SolarEdge 19

  20. Slide 20: Case Study 4 – Results

    Comparative Case Study 4 – Results  The distributed system produced 4% - 8% more energy than the traditional inverter on most days of the month  Distributed system production was lower on days with very low irradiance, due to sizable self consumption of the prototype DSP version of the unit, now r

  21. Slide 21: Comparative Case Study 5 – Spain

    Comparative Case Study 5 – Spain Layout  Power optimizers + SE5000 compared to traditional inverter of a leading brand  2 strings x 7 BP 3200N modules x 200w = 2.8kWp Shading  Shade from a nearby electricity cable  Typical of residential sites  Module-level monitoring revealed shading pattern ©

  22. Slide 22: Case Study 5 – Results

    Comparative Case Study 5 – Results  Accumulated Energy comparisons shows the distributed system consistently produces 4% more energy than the traditional inverter Traditional [kWh] SolarEdge [kWh] Energy Gain in [%] Weekly Energy Gain [%] 22 ©2010 SolarEdge

  23. Slide 23: Comparative Case Study 6 - Spain

    Comparative Case Study 6 - Spain Inverters  Power optimziers + SE6000 compared to two traditional 3kw inverters  4 strings x 10 Isofoton IS-150P modules x 150w = 6 kWp Shading Inter-row  Inter-row shading shading  Typical of commercial roof with dense installations  Modules are shaded for 2-3 h

  24. Slide 24: Comparative Case Study 6 - Results

    Comparative Case Study 6 - Results  The distributed system produced 4.5% more energy on average than the traditional inverter.  On sunny days the distributed system produced up to 14% more energy due to intensified partial shading  On very cloudy days the distributed system produced 2% – 3% more

  25. Slide 25: Questions

    Questions how what where when why how Questions! what who who where when why 25 ©2010 SolarEdge

  26. Slide 26: Thank you

    Thank you John Berdner, General Manager North America Website: Email: John.berdner@solaredge.com www.solaredge.com Twitter: www.twitter.com/SolarEdgePV Blog: www.solaredge.com/blog 26 ©2010 SolarEdge

SolarEdge Technologies — EU PVSEC (September 2010) on 6ix