Cummins Inc. · NYSE:CMI

Cummins — Technical Presentation (June 2003)

56 slides from Cummins's technical presentation, June 2003

  1. Slide 1: Cummins Reveals Secrets to Great MPG

    Cummins Reveals Secrets to Great MPG (The Physics of Better MPG) Created by: “Dr. Diesel” 1

  2. Slide 2: Understanding Fuel Economy

    Understanding Fuel Economy Vehicle Power Requirements ¾ Aerodynamic Drag ¾ Tire Rolling Resistance ¾ Accessory / Drivetrain Losses Power Train Application Guidelines ¾ Minimum Performance Requirements ¾ Standard Heavy Duty Gearing Recommendations Engine Operating Characteristics ¾ Fan operation ¾ Fr

  3. Slide 3: Customer MPG Effect Worksheet

    Customer MPG Effect Worksheet % Customer Impact Cause Special Notes % Effect Impact Engine and drive line "break-in" After 10K miles the MPG improves approx 2% to 2% to 5% effect 5% Tire tread depth effect MPG improve by approx 6% from 100% tread 0% to 6% depth tire (new), to a 50% tread depth tire

  4. Slide 4: Customer MPG Effect Worksheet (Continued)

    Customer MPG Effect Worksheet (Continued) Cooling fan on time while driving Fan HP increases with rpm (X HP cubed). When 3% to 5% cooling fans are running they use between 1.5 and 3.5 gallons of fuel per hour. Increasing fan run distance from 30% to 50% will decrease MPG by between 3% to 5%. Speed e

  5. Slide 5: Vehicle Power Requirements

    Vehicle Power Requirements 5

  6. Slide 6: Road Load/Power Demand

    Vehicle Power Requirements Road Load/Power Demand The power required to sustain a given road speed is dependant on the sum of the following forces ¾ Aerodynamic Drag ¾ Tire Rolling Resistance ¾ Grade Resistance ¾ Engine Accessory / Drivetrain losses 6

  7. Slide 7: Aerodynamic Drag

    Vehicle Power Requirements Aerodynamic Drag Aerodynamic drag is the result of the forces, (pressure imbalances), acting on a vehicle as it passes through the air ¾ The magnitude of the forces acting on a vehicle depend on speed, frontal area and external shape ¾ Aerodynamic drag is the most signific

  8. Slide 8: Aerodynamic Drag: Full Aerodynamic Treatment

    Vehicle Power Requirements Aerodynamic Drag Full Aerodynamic Treatment 8

  9. Slide 9: Aerodynamic Drag: No Aerodynamic Treatment

    Vehicle Power Requirements Aerodynamic Drag No Aerodynamic Treatment 9

  10. Slide 10: Aerodynamic Drag Power Requirement

    Vehicle Power Requirements Aerodynamic Drag Aerodynamic Power Requirement (HP) No Aerodynamic Treatment 145 Full Aerodynamic Treatment 113 32 (HP Difference) MPG advantage assuming 250 hp road load: ~ 13% Better MPG 10

  11. Slide 11: Aerodynamic Drag - Vehicle Design Considerations

    Vehicle Power Requirements Aerodynamic Drag - Vehicle Design Considerations Every 2% reduction in aerodynamic drag results in approximately 1% improvement in MPG • Full Roof Deflector / Fairing • Sloped Hood / Round Corners • Aero Bumper / Air Dam • Flush Headlights • Slanted / Curved Windshield • S

  12. Slide 12: Aerodynamic Drag - Tractor/Trailer Air Gap

    Vehicle Power Requirements Aerodynamic Drag - Tractor/Trailer Air Gap To minimize drag resulting from cross winds and turbulent air, tractor-trailer gaps should be minimized ¾ Beyond approximately 30 inches, every 10 inch increase in tractor trailer air gap increases aerodynamic drag by approximatel

  13. Slide 13: Aerodynamic Drag - Trailer Body Design

    Vehicle Power Requirements Aerodynamic Drag - Trailer Body Design Drag characteristics of miscellaneous trailer configurations and body styles can vary, and therefore will impact MPG Common trailer bodies exhibiting higher drag % Increase in ¾ Single Trailers Aerodynamic Drag Square corner / vertica

  14. Slide 14: Fuel Economy Gains: Aerodynamic Aids

    Fuel Economy Gains Aerodynamic Aids Every 2% reduction in aerodynamic drag 14 results in approximately 1% improvement in 12 MPG 10 % MPG Gain 8 6 4 2 0 0 5 10 15 20 % Aerodynamic Aid Interstate Intercity Rural Delivery Urban Delivery 14

  15. Slide 15: Tire Rolling Resistance

    Vehicle Power Requirements Tire Rolling Resistance Rolling resistance results from the internal friction of a tire as it deflects (flexes) during motion ¾ Complex rubber compounds, advanced casing construction and enhanced tread designs have led to new standards in tire performance ¾ Tire rolling re

  16. Slide 16: Tire Rolling Resistance Factors

    Vehicle Power Requirements Tire Rolling Resistance Tire rolling resistance is influenced by multiple factors: ¾ Vehicle speed ¾ Load / GCW ¾ Inflation Pressures ¾ Tire construction / tread type / depth (i.e. Bridgestone M720 is a fuel efficient version of the M726) ¾ Ambient temperature ¾ Road Surfa

  17. Slide 17: Pavement Type & Condition vs. Rolling Resistance

    Vehicle Power Requirements Tire Rolling Resistance Pavement Type & Condition vs. Relative Rolling Resistance Relative Rolling Road Surface Resistance % ¾Concrete - polished (best MPG) 88% - new 100% ¾Asphalt - with finish coat 101% - medium coarse finish 104% - coarse aggregate 108% ¾Chip and Seal B

  18. Slide 18: Tire Rolling Resistance - Weight Impact

    Vehicle Power Requirements Tire Rolling Resistance – Weight Impact Rolling Resistance Power Requirement (HP) 80,000 lbs GCW -87 HP 65,000 lbs GCW -71 HP 16 (HP Difference) MPG advantage assuming 250 hp road load: ~ 6% Better MPG w / lower GCW 18

  19. Slide 19: Tire Rolling Resistance - Tread Depth and Pattern

    Vehicle Power Requirements Tire Rolling Resistance - Tread Depth and Pattern - 6% 7/32 tread wear represents ~10% reduction in rolling resistance (5% better MPG) % MPG 0% Rib tires at all wheel positions will provide greatest efficiency Tread pattern is important +7% because lugs have deeper tread (

  20. Slide 20: Tire Rolling Resistance - Axle Alignment

    Vehicle Power Requirements Tire Rolling Resistance - Axle Alignment Test #1 Test #2 Test #3 Test #4 Test #5 Alignment Steer Tire. Toe-In: 0" 1/4 1/4" 3/8" 3/8" Drive Axle. Non-Parallel: 0" 0“ 1/2" 1" 1" Trailer Axle. Non-Parallel: 0" 1/2“ 1/2" 1" 0" % Effect on MPG: 0.0% -0.6% -0.8% -1.7% -2.2% 20

  21. Slide 21: Tire Rolling Resistance - Inflation Pressures

    Vehicle Power Requirements Tire Rolling Resistance - Inflation Pressures Proper inflation pressures critically impact tire performance ¾ Under inflation can have very detrimental effects on tire performance and durability • Reduces fuel economy • Increases tire wear rates • Creates irregular tread w

  22. Slide 22: Tire Rolling Resistance - Inflation Pressure

    Vehicle Power Requirements Tire Rolling Resistance - Inflation Pressure 22

  23. Slide 23: Engine Accessory / Drivetrain Losses

    Vehicle Power Requirements Engine Accessory / Drivetrain Losses Although largely fixed, engine accessory and drivetrain losses can significantly contribute to total vehicle power requirements ¾ Engine accessories • Cooling fan • Freon compressor • Air compressor • Alternator • Power steering ¾ Drive

  24. Slide 24: Engine Accessory / Drivetrain Losses - Lubricants

    Vehicle Power Requirements Engine Accessory / Drivetrain Losses - Lubricants While the efficiency of drivetrain components is largely fixed by design, gross efficiency losses can be minimized through proper selection of lubricants Synthetic base lubricants exhibit superior high temperature stability

  25. Slide 25: Engine Accessory / Drivetrain Losses - Lubricants

    Vehicle Power Requirements Engine Accessory / Drivetrain Losses - Lubricants Test results indicate no significant difference in engine efficiency between synthetic and mineral base lube oils at normal operating temperatures and therefore may not be cost effective ¾ Thermostatically controlled lube o

  26. Slide 26: Engine Accessory / Drivetrain Losses - Lubricants

    Vehicle Power Requirements Engine Accessory / Drivetrain Losses - Lubricants The high temperature stability and low temperature fluidity of synthetic lubricants make them ideally suited for drivetrain components Dynamometer and on-highway vehicle testing has demonstrated significant benefits in fuel

  27. Slide 27: Powertrain Application Guidelines

    Powertrain Application Guidelines 27

  28. Slide 28: Gearing Recommendations

    Gearing Recommendations Minimum Performance Requirements Replacement Equipment ¾ Know the vehicle being replaced! • Recommendations should be carefully compared with currently existing equipment. Existing equipment should dictate “Minimum Performance Requirements!!” Drivability (Driver Satisfaction)

  29. Slide 29: Standard Heavy Duty Gearing Recommendations

    Powertrain Application Guidelines Standard Heavy Duty Gearing Recommendations ¾ On-Highway Standard Gearing for Linehaul Applications (≤ 80,000 lbs) • 1450 rpm @ 65 mph (ISX) • 1500 rpm @ 65 mph (ISM) ¾ See PowerSpec… Go to www.powerspec.cummins.com to view application specific gearing recommendatio

  30. Slide 30: Powertrain Application Guidelines

    Powertrain Application Guidelines Selection of appropriate drivetrain components is critical to achieving drivability and MPG goals Direct-Drive transmissions can yield a 2+% advantage in MPG from lower: ¾ Gear mesh losses ¾ Spin / oil churn losses Go to www.powerspec.cummins.com to view application

  31. Slide 31: Engine Operating Characteristics

    Engine Operating Characteristics 31

  32. Slide 32: Temperature / Pressure Recommendations

    Engine Operating Characteristics Temperature / Pressure Recommendations Coolant and lube oil operating temperatures ¾ Cooling system operating temperatures - (180+ Deg F) • +.4% MPG / +30 Deg F ¾ Lube system operating temperatures - (225+ Deg F) • +1% MPG / +30 Deg F Intake and exhaust restriction ¾

  33. Slide 33: Fan Operation - Duty Cycles

    Engine Operating Characteristics Fan Operation - Duty Cycles Typical on-highway fan run time ¾ Year round average 5-10% Typical heavy duty fan power requirements RPM ISM (HP) ISX (HP) 1100 9 10 1300 14 17 1500 22 26 1700 32 37 1900 45 52 2100 61 70 ¾ Note at 1450 rpm, cruise operation, the fan being

  34. Slide 34: Fan Operation - Freon Compressor Operation

    Engine Operating Characteristics Fan Operation – Freon Compressor Operation Freon Compressor Operation ¾ Approximately 50% of total fan run time is attributed to the freon compressor operation ¾ Excessive fan operation may result from …Overcharged system …Defective\incorrect head pressure switches …

  35. Slide 35: Air Compressor Operation - Duty Cycles

    Engine Operating Characteristics Air Compressor Operation - Duty Cycles Air compressor HP requirements (WABCO 15.2 and 18.7 CFM) *Loaded Unloaded RPM HP HP 1300 4.0 0.4 1500 4.5 0.5 1700 5.0 0.6 1900 5.5 0.8 2100 6.0 1.0 ¾ Typical air compressor duty cycles approx 5% • 10-12 minutes between pumping

  36. Slide 36: Engine Lube Oil Levels

    Engine Operating Characteristics Engine Lube Oil Levels Exceeding recommended engine oil levels can result in significant oil churning / spin losses ¾ Effects of excessive churning / spin losses (-2+% impact on MPG) • Reduced engine efficiency • Reduction in performance • Deterioration of critical o

  37. Slide 37: Operating Techniques

    Vehicle Operating Techniques 37

  38. Slide 38: Driver Caused Variability

    Vehicle Operating Techniques Driver caused variability Driver behavior can account for up to 30% variation in fuel economy # of Drivers Least Most Efficient Efficient Drivers Drivers Fuel Economy (MPG) 38

  39. Slide 39: Pre-Trip Inspection

    Vehicle Operating Techniques Pre-Trip Inspection Conduct daily vehicle pre-trip inspections ¾ Engine lube oil levels ¾ Tire inflation pressures ¾ Service brake adjustments ¾ Air system leaks ¾ Coupling devices ¾ Etc. • Reduces the potential for unscheduled downtime or vehicle related accidents • Imp

  40. Slide 40: Shifting Techniques

    Vehicle Operating Techniques Shifting Techniques Use operating techniques that result in the lowest number of engine rev’s per mile to maximize MPG (Note: constant operation below 1300 rpm will significantly reduce MPG) ¾ Use Load Based Speed Control (LBSC) to reduce engine RPM shift points and driv

  41. Slide 41: Actual Customer Gear-Down Data

    Actual Customer Gear-Down Data: MPG in Different Gears (or what really happens to MPG one gear down) Gears 1 - 8 Gear 10 (Top) Fuel Economy Summary (Recommend ≤ 5% Gear 9 (Gear Down) (Recommend ≤ 90% (If driven to our Truck Dist) (Recommend ≤ 5% Dist) Dist) recommendations) % Trip % Trip % Trip Dist

  42. Slide 42: Cruise Operation - Anticipating Change

    Vehicle Operating Techniques Cruise Operation - Anticipating Change Maintain a high field of vision, establish proper following distances ¾ Anticipate changes in traffic and road conditions ¾ Avoid abrupt stops or rapid changes in vehicle speed ¾ Minimize use of service brakes (plan ahead) 42

  43. Slide 43: Cruise Operation - Vehicle Speed Management

    Vehicle Operating Techniques Cruise Operation - Vehicle Speed Management Manage vehicle road speeds ¾ Maintain the lowest reasonable cruise speeds possible ¾ Minimize time spent at maximum vehicle road speeds • Above 55 mph, for each 1 mph increase in average vehicle speed, MPG will decrease by appr

  44. Slide 44: Operation in Hilly and Mountainous Terrain

    Vehicle Operating Techniques Operation in Hilly and Mountainous Terrain In rolling terrain, use a light throttle and allow momentum to carry the vehicle over short grades In hilly and mountainous terrain, where possible, use the engines entire operating range before gearing down When cresting steep

  45. Slide 45: Idle / PTO Fuel Consumption

    Vehicle Operating Techniques Idle / PTO Fuel Consumption Avoid unnecessary engine idling ¾ Idle / PTO fuel consumption Engine Speed Average Fuel RPM Consumption (Gal / Hr) 650 ~0.5 1000 ~1.0 1200 ~1.5 ¾Idle / PTO fuel consumption increases exponentially with engine speed (0–10% impact on MPG) • Wher

  46. Slide 46: Efficient Driving Behavior

    Vehicle Operating Techniques Efficient Driving Behavior High average vehicle speeds with minimum time spent at maximum vehicle road speed High percent trip distance in top gear ¾ 90+ % recommended High percent distance in cruise control Minimum percent Idle / PTO operation Minimum service brake acti

  47. Slide 47: Rules of Thumb

    Understanding Fuel Economy Rules of Thumb Above 55 mph – each 1 mph increase in vehicle speed will decrease fuel economy by 0.1 mpg Idle time is costly (i.e. a 20% increase in idle time costs up to 0.2 mpg) ATA & The Maintenance Council says the difference between the best and worst drivers is 30% T

  48. Slide 48: Appendix

    Appendix 48

  49. Slide 49: Customer MPG Effect Worksheet

    Customer MPG Effect Worksheet % Customer Impact Cause Special Notes % Effect Impact Engine and drive line "break-in" After 10K miles the MPG improves approx 2% to 2% to 5% effect 5% Tire tread depth effect MPG improve by approx 6% from 100% tread 0% to 6% depth tire (new), to a 50% tread depth tire

  50. Slide 50: Customer MPG Effect Worksheet (Continued)

    Customer MPG Effect Worksheet (Continued) Fan on time while driving Fan HP increases with rpm (X HP cubed). When 3% to 5% cooling fans are running they use between 1.5 and 3.5 gallons of fuel per hour. Increasing fan run distance from 30% to 50% will decrease MPG by between 3% to 5%. Speed effect -.

  51. Slide 51: Fuel Economy Troubleshooting Roles and Responsibilities

    Fuel Economy Troubleshooting Roles and Responsibilities Outlined below are the roles and responsibilities relative to troubleshooting a customer fuel economy complaint. It is expected that 80% of the complaints should be resolved in steps 1 and 2. 1. Distributor Salesperson / Factory Territory Manag

  52. Slide 52: Fuel Consumption - General Information

    Fuel Consumption - General Information The Fuel Consumption - General Information section of the Troubleshooting and Repair Manual, Signature/ISX/QSX15 Engines, Bulletin 3666239 and Troubleshooting Excessive Fuel Consumption, Bulletin Number 3666094, should be referenced prior to any troubleshooting

  53. Slide 53: Fuel Consumption - Customer Complaint Form

    Fuel Consumption - Customer Complaint Form Customer Name / Company: Customer Contact: Describe the issue/complaint in detail, including current fuel economy being achieved: Answer the following questions. Some questions require making an “x” next to the appropriate answer. 1. What is the expected fu

  54. Slide 54: Customer Complaint Form (Service Location Section)

    14. Are accurate records kept of fuel added on the road? Yes No 15. Do routes vary between compared vehicles? Yes No 16. Have routes changed for the engine being checked? Yes No 17. Has driver changed for the engine being checked? Yes No 18. Has typical load changed for the engine being checked? Yes

  55. Slide 55: Customer Complaint Form Questions 28-31

    28. Has vehicle been checked for fuel leaks? Yes No 29. Does vehicle have either a fuel heater or cooler? Yes No 30. Is customer using proper fuel or ambient conditions? Yes No 31. Are all charge air cooler clamps present and tight? Yes No IF AFTER FILLING OUT THIS FORM IT APPEARS THAT THE PROBLEM I

  56. Slide 56: Drivability/Low Power/Excessive Fuel Consumption Checklist

    Drivability/Low Power/ Excessive Fuel Consumption – Checklist Vehicle/Equipment Specifications Year/Type/Model: Wheel Base: Wheel configuration (ex. 6 x 4 – 2S): Transmission Mfg: Transmission Model: Rear Axle Model: Rear Axle Ratio: Application: On Highway Off Highway Genset Marine Typical GVW: lbs

Cummins — Technical Presentation (June 2003) on 6ix