Wolfspeed, Inc. · NYSE:WOLF
Wolfspeed — Technical Presentation (April 2022)
17 slides from Wolfspeed's technical presentation, April 2022
Slide 1: Wolfspeed Power Modules
WOLFSPEED POWER MODULES WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.
Slide 2: Introducing the XM3 Module Platform
INTRODUCING THE XM3 MODULE PLATFORM Supports Wolfspeed’s 650 – 1700 V C3M™ Silicon Carbide MOSFETs Capable of up to 600 A 6.7 nH stray inductance 60% less volume and 55% less area than equivalent modules Built-in temperature sensor 2 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All ri
Slide 3: 3 Phase Inverter Reference Design Overview
3 PHASE INVERTER REFERENCE DESIGN OVERVIEW • 625 kW peak output power • 900 V DC bus max and 360 ARMS phase current (Single) 720 ARMS phase current max (Parallel) • Compact and lightweight at only 8.6 L and 9.7 kg • Power density of 72.5 kW/L, 3.6x traditional Si inverter • >99% efficiency • High-pe
Slide 4: System Diagram
SYSTEM DIAGRAM • Complete solution for dual motor drive application • 6 current sensors • Dual motor position sensor support • Isolated CAN interface • Dual-core, 200 MHz, 32-bit DSP • Images Shown are Not to Scale CAB450M12XM3 CGD12HBXMP 4 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc.
Slide 5: XM3 Dual Inverter Power Loop
XM3 DUAL INVERTER POWER LOOP • Custom DC Link capacitor with integrated laminated • Less than 20 nH total stray inductance bussing for both banks of power modules, 900 V, 600 µF • >98% efficiency • Dedicated DC input terminals • Hall-effect current sensor on each output busbar reduce • Low power loo
Slide 6: High Efficiency Double Sided Cold Plate
HIGH EFFICIENCY DOUBLE SIDED COLD PLATE • Double sided Wieland Microcool CP4012D-XP is 13% thinner and previous generation CP3012 while featuring the same MDT pins for low thermal resistance • The profile of the cold plate has been optimized to match the XM3 module footprint and is 10% narrower and
Slide 7: Short-Circuit Operation
SHORT-CIRCUIT OPERATION VDS ISC VGS • Wolfspeed’s CGD15HBXMP gate driver is optimized to safely • Short circuit test with DC bus of 800V produced a peak detect and respond to a short circuit event current 6.2 kA and peak voltage 985 V • Soft-shutdown and low stray inductance limits VDS peak • Blanki
Slide 8: CIL Waveforms – Aggressive Switching
CIL WAVEFORMS – AGGRESSIVE SWITCHING Turn-On Turn-Off 1122V 713A 30.1mJ – 113 A of peak current overshoot 23.1mJ – 80 V of margin at 2 x overload 8 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wo
Slide 9: Paralleled Output Currents at 750A RMS per Phase
PARALLELED OUTPUT CURRENTS AT 750ARMS PER PHASE 9 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.
Slide 10: Inverter Power Losses and Efficiency
INVERTER POWER LOSSES @ 800 V, 10kHz, 25°C COOLANT Inverter Losses vs Output Current Inverter Efficiency vs Output Power 6000 99.9 750 A, 5530 W 99.8 5000 99.7 99.6 4000 99.5 > 99% Inverter Losses, W 99.4 Efficiency, % 3000 99.3 99.2 2000 99.1 99.0 1000 98.9 98.8 0 98.7 0 100 200 300 400 500 600 700
Slide 11: Switching Losses (Per Switch Position)
SWITCHING LOSSES (PER SWITCH POSITION) • 24.2 mJ at 300 A • 3X lower than comparable Si IGBT 1 300 A Nominal 𝑃𝑃𝑆𝑆𝑆𝑆 = 𝐸𝐸𝑂𝑂𝑂𝑂 + 𝐸𝐸𝑂𝑂𝑂𝑂𝑂𝑂 ∗ 𝑓𝑓𝑆𝑆𝑆𝑆 ∗ 2 Condition 1 𝑃𝑃𝑆𝑆𝑆𝑆 = 24.2 𝑚𝑚𝑚𝑚 ∗ 10 𝑘𝑘𝑘𝑘𝑘𝑘 ∗ 2 𝑃𝑃𝑆𝑆𝑆𝑆 = 121 𝑊𝑊 (per switch) WOLFSPEED CONFIDENTIAL &…
Slide 12: Hall-Effect Current Sensors for Compact Solutions
HALL-EFFECT CURRENT SENSORS FOR COMPACT SOLUTIONS • COTS Current Sensor modules are easy to use but can be very bulky and six are required for dual inverter • Melexis MLX91208 Hall-effect sensor in SOIC-8 package integrates a magnetic concentrator into the IC eliminates the large ferromagnetic core
Slide 13: XM3 Dual Inverter System
XM3 DUAL INVERTER SYSTEM Modular sheet metal construction allows access to components for evaluation in application Compact metal enclosure only 8.6 L and 9.7 kg Dimensions: 204 x 267.5 x 157.5 mm Handles and feet included for portability 13 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc
Slide 14: Controller
CONTROLLER • Controller should be selected to ensure enough processing “horsepower” is available to sample all inputs and make control decisions • High ADC count enables all required system states can be measured for appropriate control and monitoring • Controller should have fast hardware interrupt
Slide 15: CGD15HBXMP XM3 Gate Driver
CGD15HBXMP XM3 GATE DRIVER • Over-current protection quickly and safely responds to short circuit events • +15/-4V output compatible across whole C3M portfolio • RS-422 differential inputs for improved noise immunity • 2 W isolated power supply per channel • Isolated temperature sensor feedback • Lo
Slide 16: Application Flexibility
APPLICATION FLEXIBILITY • Output terminals enable application flexibility • Phase outputs can be used as dual inverter or paralleled for higher output current Dual Inverter Single Inverter 375A per phase 750A per phase 16 WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All rights reserve
Slide 17: Thank You
THANK YOU WOLFSPEED CONFIDENTIAL & PROPRIETARY © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. 17